Major Items we deal with . Worm gearbox, Geared Motor Electric Motor, Rotary Evaporator Stirrer Drives , VFD, Mechanical Variator ELMRAD & TRANSMECH IS A GROUP COMPANY OF MR JAY SHAH has been Established in the year 1973 In GIDC Makarpura Industrial ELMRAD Estate, baroda Gujarat INDIA. We are a Multi- Product Importing , Exporting and Supplying Company USA We Export our Products to : Netherland Kenya Tanzania Sri Lanka U.A.E Saudi ELMRAD introduces Brand Heavy Body Aluminum gearbox
16
Embed
Major Items we deal with...Worm Gear Speed Reducer 03. ELMN Single Reducer(flange input,input speed is 1400r/min) / (matched with 4 poles motor) Model N2 (r/min) M2 (N. m) i (kN) f.s.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Major Items we deal with .
Worm gearbox, Geared Motor
Electric Motor, Rotary Evaporator
Stirrer Drives , VFD,
Mechanical Variator
ELMRAD & TRANSMECH IS A GROUP COMPANY OF MR JAY SHAH
has been Established in the year 1973 In GIDC Makarpura Industrial ELMRAD
Estate, baroda Gujarat INDIA.
We are a Multi- Product Importing , Exporting and Supplying Company
USA
We Export our Products to :Netherland Kenya Tanzania Sri Lanka U.A.E Saudi
ELMRAD introduces Brand Heavy Body Aluminum gearbox
ELMN WORM GEAR SPEED REDUCER
1. Products pictures P.01
2. Product Structure P.02
3. Model Selections P.03
4. Parameter Selections P.04
5. Mounting Dimension P.08
6. Lubricant P.13
7. Malfunctions Analysis P.14
Worm Gear Speed Reducer 01
Single Speed Reducer1/5 - 1/100
ELMN ELMN..VS ELMN..F2
ELMN-S ELMN-SS ELMN-SF
Bore seal
Bearing
Worm gear
Name plate
Gear box
O-ring
Worm shaft
Input flange
Oil Seal
2. Single Step Mounting Positions
1. Prouduct Structure
Worm Gear Speed Reducer 02
Please understand the following at first in order to select the model of ELMN Worm-gear
speed reducer properly :
1. Load Condition.
2. Speed scope or ratio in application.
3. Working condition and environment.
4. Installation space.
Define working in condition Coeffiecient k1 and revise coefficient k2.
1. Ensure machinery load types A,B,C according to table 1.
2. Get the working condition coefficient k1 from diagram 1 according to turning ime(hour/day) and start
frequency (times/hour).
3. Inspect working condition and select coefficient k2 from table 2.
Plastic Injection Moulding, Blow Moulding Machines &it’s Mould & Dies
Pharma machinery- tablet Coating , Tablet Pressing M/C. Slat Converyor, Ampoule Mkaing M/C Etc. TabletCoating, Syrup / Liquid Auto Filling, Capping And Labeling Machines
Oil pump, Molten metal pumps, Dozing Pumps, Gear Pumps, Screw pump, Brine And Slurry pumps, PositiveD i s p l a c e m e n t p u m p s , c e n t r i f u g a l P u m p s .