Jaycar Electronics 2016 - Digital Freecall Order Hotline: 1800 022 888 Prices in Australian dollars Back to Menu MAIN BATTERIES & ACCESSORIES SOLAR INVERTERS LABORATORY POWER SUPPLIES CAR POWER SUPPLIES OPEN FRAME SWITCHMODES AC ADAPTORS & PLUGPACKS MAINS POWER HARDWARE TRAVEL ADAPTORS POWER LEADS & ADAPTORS POWER BOARDS CONSUMER BATTERIES LED STRIP & DOWN LIGHTING SPECIALTY GLOBES BATTERY CHARGERS POWER & SMART ENERGY DIGITAL CATALOGUE FEATURES • Updated Product Information • Interactive Navigation PAGES 58 PRODUCTS MORE THAN 670
59
Embed
MAIN Menu DIGITAL CATALOGUE CHARGERS · 6/12VDC 1.5A 3 Stage Battery Charger 3 stage set and forget maintenance charger. Automatically diagnoses and recharges 6 or 12V lead acid,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Jaycar Electronics 2016 - DigitalFreecall Order Hotline: 1800 022 888 Prices in Australian dollars
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars Jaycar Electronics 2016 - Digital
BATTERYCHARGERS
6/12VDC 1.5A 3 Stage Battery Charger 3 stage set and forget maintenance charger. Automaticallydiagnoses and recharges 6 or 12V lead acid, gel and AGMrechargeable batteries for boats, motorcycles etc. Thislittle unit packs a real punch with 1.5A maximumcharging power for faster recharging. Maintainsyour battery for months and extends batterylife by constantly monitoring battery conditionfor bulk, trickle or maintenance chargesaccordingly.
6/12VDC 4A 4 State Charger This smart charger uses a microprocessor to diagnose the batteries state of charge,providing the correct charging mode, eventually switching to float/maintenancecharge to keep the battery at full charge and eliminate battery sulphation. Suitablefor all types of SLA batteries-wet cell, gel cell and AGM ranging from 5Ah to120Ah. This charger has pre charge mode to identify sulphated batteries and precharge at low current for a period beforeautomatically switching to high current toextend your batteries working life.
Specifications MB-3609Output voltage 7.2, 14.2VDCCharging current 1.5A maxEfficiency >75%Back current drain <35mACapacity 6 - 20AhDimensions 110(L) x 58(W) x 46(D)mm
Background image sent to us by Victor who shops at our Jaycar East Kew store
“My well loved and sightly cluttered workplace - the source ofmany hours of joy and experimentation. Thank you Jaycar for always being close at hand.”
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
3 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
MULTI-STATE BATTERY CHARGERS (CONTINUED)
BATTERY CHARGER COMPARISON GUIDE
High tech SLA battery chargers for automotive, marine, motorcycle, workshop or industrial use. All feature switchmode operation, multi-stage maintenance and charging, near-bulletproof performanceand microprocessor control. All are IP rated for use in workshops and hostile environments.
• 3 year warranty • Short circuit & reverse polarity protection • Anti-spark protection • Dust & splash proof - most are IP65 rated
Use our selection guide to help choose...
TECH TALK!
MULTI-STATE CHARGERS
12V-7.2A/24V-3.6A 9 State Charger The bigger brother of MB-3611, this is a fully automatic 9 state charger for 12 or 24V sealed lead acidbatteries- wet cell, gel cell and AGM. Advanced diagnostics enable this unit to maximise charge rate whilealso maximising battery life. You can also switch it onto power supply mode where it will act as a 13.8Vand up to 5A power supply, useful in supplying power to computer systems of many modern cars whenreplacing batteries.
Charging states include:
Battery test: Checks the battery to ensure it is ready for charging, polarity of leads etc.Desulphation: Detects sulfated batteries. Pulsing current and voltage, removes sulfate from the leadplates of the battery restoring the battery.Soft start: Initial battery test to determine battery condition. If the battery is severely discharged, chargerwill begin the Soft Start stage. Charging starts with reduced current until battery voltage reaches a normalcondition for charge.Bulk mode: Major charging stage where the battery receives the majority of its charge. During this stagethe battery is charged to up to 80% capacity.Absorption mode: Completes the charge up to virtually 100% at a slower charge rate to protect thebatteries working life.Recondition mode: Select “Recondition” mode, charges at higher voltage to recondition the sulfate of thebattery to save battery life.Analysis: Tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced.Float: Low constant voltage, minimal charge current, battery is fully charged.Pulse mode: Maintaining the battery at 95-100% capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged.
All-in-one chargers which have multiple charge settings to suit different sized batteriesand charging requirements. Capable of recharging the battery and maintaining thecharge state indefinitely, they are particularly well suited to being continuously
connected to a battery. Some models also have additional functions such as rapidboost charging and can also be used as a general purpose high current power supply.
Output voltage 5-14.7V (12V battery), 10-29.4V (24V battery)
Input current 5A @ 220VACCharging current 12V - 7.2A, 24V - 3.6AEfficiency >75%Ripple ≤150mVBack current drain ≤1.2mARated IP65Dimensions 210(L) x 90(W) x 60(D)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
4 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Battery-to-Battery DC Charge Controller 12/24V 140AThis advanced programmable Battery-to-Battery DC Charge Controller can be used in three different and distinct ways making it agenuine battery management control system. Firstly, it can be used as a bi-directional, fully programmable battery to battery chargecontroller. Alternatively, it can be used as an independent, fully programmable DC load controller low voltage disconnect/re-connectwith programmable twin timer functions. Or finally, it can be used in conjunction with the SuperCombi power management systemas the DC load controller or DC generator input. Being fully programmable via the large LCD and simple intuitive front panelcontrols, the possible applications for this little device are vast and the programmable flexibility allows for even the more abnormalinstallations - even if the battery is mounted right up the other end of your caravan with 20m of cable from the DC charging source,you can adjust the voltage set points to compensate for voltage drop of the cables.
• Suitable for 12V or 24V systems, up to 140A maximum current.
Specifications MI-5282Operating voltage 9-35VDCRated continuous current 100A/12V, 70A/24VRated intermittent current 140A/12V, 100A/24VDimensions 111(W) x 90(H) x 58(D)mmSee website to download user manual.
BATTERY CHARGE & BOOST CONTROLLERS
12V 15/40A High Power 4-Stage Wall Mount 240V Battery Chargers Tough wall mounted high power battery chargers designed to quickly recharge 12V lead-acid batteries (wet, sealed, AGM, etc) with a high level of efficiency and charge current.They feature microprocessor controlled smart 4-stage charging to ensure battery life is maintained by monitoring and charging the batteries safely, resulting in a charger that is safeto leave connected indefinitely. Thanks to their auto-start feature, they are a fantastic choice for caravan, motorhome or marine applications. Output is fully electrically isolated, andthe charger can even be set to operate as a regulated high current power supply. DIP switches allow you to select the charging voltage, and output is via heavy duty screw terminals.
Specifications MB-3710 12V 15A MB-3715 12V 40AInput voltage 230VAC 230VACBulk/Absorption 14.2VDC / 14.6VDC / 14.8VDC 14.2VDC / 14.6VDC / 14.8VDCFloat charging 13.2VDC / 13.5VDC / 13.8VDC 13.2VDC / 13.5VDC / 13.8VDCOutput current (max) 15A 40AAdvantage boost charging Yes YesEfficiency up to 88% up to 88%Over charging protected Max absorption time 6 hours Max absorption time 6 hoursOutput short circuit protected Yes, with current limiting Yes, with current limiting
LED Display Green - Charger on, Green - Float, Yellow - Absorption, Red - Bulk
Green - Charger on, Green - Float, Yellow - Absorption, Red - Bulk
Operating temperature 0 - 40°C 0 - 40°CDimensions 205(L ) x 130(W) x 70(D)mm 250(L) x 235(W) x 80(D)mm
MB-3710 MB-3715
MULTI-STATE BATTERY CHARGERS (CONTINUED)
Specifications MB-3608Input voltage 220 - 240VACOutput voltage 12 or 24VDCInput current 4A maxCharging current 12V-25A, 24V-12.5AEfficiency >75%Ripple 150mV, 300mA maxBack current drain <5mARating IP65Dimensions 260(L) x 135(W) x 70(H)mm
12V-25.0A/24V-12.5A 9-StateNine step fully automatic 25 amp high current charger with maintenance charging of all types of SLA batteries as well as lead-calcium batteries from 50 - 500Ah, either 12V or24V. The electronics are fully microprocessor controlled and protected against user error, so is totally safe to leave connected for months at a time. This charger will also charge insub-zero temperatures, will recover sulphated batteries and can be used as a 5A power supply. Also features "boost" modes torecover deeply discharged batteries. The battery output lead has a temperature sensor to automatically compensate chargingvoltage dependant on temperature, so no matter what the conditions, you will get a full charge into your battery. For caravanand boat users, it also has a night charge mode: in this silent mode, charging is performed at reduced current with the coolingfans turned off, then returns to normal levels after 9 hours. See our website to download full product info sheet.
See our website to downloadfull product info sheet.
Perfect for boats,caravans & motorhomes
12V-15A/24V-7.5A 9-State Nine step fully automatic 15 amp high current charger with maintenance charging of all types of SLA batteries as wellas lead-calcium batteries from 50 - 250Ah, and either 12V or 24V. The electronics are fully microprocessor controlledand protected against user error, so is totally safe to leave connected for months at a time. This charger will alsocharge in sub-zero temperatures, will recover sulphated batteries and can be used as a 10A power supply. Alsofeatures "boost" modes to recover deeply discharged batteries. The battery output lead has a temperature sensor toautomatically compensate charging voltage dependant on temperature, so no matter what the conditions, you willget a full charge into your battery. The output lead is also fitted with Anderson connectors to allow for easyconnection to existing wiring or use of the included alligator clips or bolt terminals.
• Short circuit and reverse polarity protection• Anti-spark protection• IP65 outdoor rated• Standby, fault, mode selection and
charging LED indicators• Mounting feet for wall mounting• Safe to leave connected for months at a time
Specifications MB-3607Input voltage 220 - 240VACOutput voltage 12 or 24VDCInput current 2A maxCharging current 12V-15A, 24V-7.5A, 12V-Calcium-5AEfficiency >75%Ripple 150mV, 300mA maxBack current drain <5mARating IP65 Dimensions 260(L) x 135(W) x 70(H)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
5 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
2, 6 & 12V 600mAThis fully automatic charger will charge 2V, 6V, and 12V sealed, and standard (car) lead-acidbatteries. When the battery is completely charged, the current is automatically reduced to prevent overcharging.
• 600mA charging current • Short circuit and wrong polarity protected• Constant charging current • No charge if battery connected incorrectly• LED’s show charging stateOutput lead has battery clips for easy charging. Ideal totrickle charge your car battery while on holidays or keepthose SLA batteries charged and in tip top condition.
6, 12 & 24V 1.2A Automatic This switchmode SLA battery charger has an automatic function that cuts the chargingcurrent to near zero once the battery is charged, whilst still continuing to monitorbattery voltage. Works with 6V, 12V or 24V SLA batteries, and automatically detectsthe battery voltage ensuring you don't make any mistakes - just connect the chargerand it starts automatically. LED indicator shows charging state, with connections madeby alligator clips.
• 6V, 12V and 24V charging• Short circuit and reverse
polarity protection• Automatic cut-out
and voltage detection• Will not charge a
completely flat battery• Dimensions: 100(L) x 45(W) x 20(D)mm
6V-600mA & 12V-1000mA A new range of mains powered Lead Acid batterychargers designed for 6V (MB-3618) and 12V(MB-3619). These intelligent automatic batterychargers stop charging when the battery is full and start to maintain the battery with a 'floating' charge mode. The charger monitors the battery voltage andtops-up the battery to keep it fully charged all the time. Thisfeature allows you to leave the charger connected to thebattery without risk of overcharging. It comes with a LEDindication for battery charging status. The 2m long cable includes an interchangeable DC plug and Alligator clips.
Specifications MB-3618 MB-3619Input 100-240VAC, 60/50Hz 100-240VAC, 60/50HzCharging current 600mA 1000mACharging voltage 6.0VDC 12.0VDCFloat output voltage 6.8-7.2VDC 14.4VDCBulk charge mode voltage 6.0-6.8VDC 14.0VDCDimensions 65(L) x 52(D) x 36(W)mm 70(L) x 40(D) x 40(W)mm
TECH TALK!
LOW CURRENT CHARGERSLow current output designed to steadily recharge sealed lead acid (SLA) batterieswithout causing the battery to overheat and become a swollen mess. As a guideline the charger’s current rating should be no more than 10 to 15% of the battery’s ampere-hour rating.
6V/12V/24V 15A Intelligent Battery Charger An intelligent battery charger suitable for flooded and gel lead acid batteries including deep cycle batteries at 6V, 12V or 24V. The microprocessor controlled unit provides 4 stages of charging, Soft Start, Bulk Charge, Absorption and Float which assists in the batteries life expectancy and performance. An auto detectionfeature provides a user friendly experience, which can be pre-programmed or manuallyset for greater control. Should a blackout occur or AC input power be lost during acharging operation the memory function will resume charging once power is re-established. Other features include temperature/voltage compensation, reversepolarity/short circuit protection and a battery status indicator. Ideal for cars, motorcycles,caravans and boats with battery capacities between 20-200Ah. It's also ultra-portablewith a handy storage pocket in the back for the leads.
• Memory function• Temperature controlled fan• LED battery status display• Temperature and voltage compensation
Protection:• Anti spark• Short circuit• Reverse polarity• Over heating/current/voltage
12V 10A Intelligent Switchmode 5 Stage Charger A robust 12V battery charger packed with useful features to safely charge and maintainthe life of your batteries. The front control panel allows you to control the battery typebeing charged (see below for supported types), the desired charge rate, the displaymode (current, battery voltage, charge percentage). It will also indicate if there is abattery fault or if the polarity is reversed in which case the charging will immediatelystop to protect the battery. Features positive/negative fly leads with clips that are neatlytucked away into a compartment at the rear of the unit.
• Short circuit protection• Voltage compensation• Overheat protection• Polarity reversal protection• Fan cooled• Faulty battery indicator• Charging current: 2A (Low rate), 6A (Normal rate),
6V & 12V, 8A Heavy Duty with Trickle ChargeThis charger is suitable for both 6 and 12 volt car, boat,motorcycle and lawnmower batteries. Featuring 4-stageLED charge indicators, the charger can be switchedbetween trickle or heavy duty charge rates and isrecommended for casual, domestic charging tasks. The unitis housed inside a tough plastic case with carry handle, isdouble insulated and features overload and reverse batteryprotection. The battery leads are terminated to heavy dutyalligator clips on a 1 metre length of cable.
• Complies with Australian Electrical Safety Regulations.
TECH TALKThere are 5 stages of operation:1. Soft Start - tests the battery condition. A severely discharged battery needs charging
with a reduced current until the voltage reaches 12V.2. Bulk charging - delivers most of the charge (60-80%). The charger delivers maximum
current until the terminal voltage has risen to the set level.3. Absorption - completes the charging up to nearly 100% at a constant voltage. The
current tapers off as the battery reaches full capacity.4. Float - maintenance charging at constant voltage, keeping battery at 100% charge.5. Pulse - long term maintenance charging. Cycles the battery between 80 and 100%
charge for maximum battery life. The battery receives a pulse, starting a new chargecycle, when voltage drops to set limit. The charger can be connected for monthskeeping the batteries fresh.
TECH TALK
WHEN IS A LEAD-ACID BATTERY DEAD?Lead acid battery technology has been around for about 150 years. The technology is asreliable as a sheep dog, BUT it has its limits. Lead Acid Batteries basically love work. Themore you start something with them and then charge them up, the more they like it. Theydo, however, eventually die. If you leave them idle for a long time or leave themdischarged without recharging, you can easily kill them.
The voltage difference between a good battery and a dead (or "dodgy") one is less than avolt! If you have a battery with a terminal voltage of 11.8V or less, it is probably history.You can try to recharge it, maybe add some INOX (page 308), but, really you won't be ableto trust it.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
6 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
SEALED LEAD ACID BATTERY COMPARISON GUIDESealed lead acid batteries are used generally for two purposes.Standby applications such an emergency power source forsafety lights and for security and burglar alarm systems,computer peripheral terminals etc. and cyclic applications as aportable power source for MP3 players, DVRs, toys, lights anduse with solar panels for remote power.
The features of these batteries include: • Leak proof construction • Long service life• Usable/rechargeable in any position • Deep discharge recovery• Wide operating temperature range • High discharge rate capability• Designed not to discharge hydrogen into the atmosphere.
Charge voltage for 12 volt is 13.5 to 14.7 volts and for 6 volt is 6.8 to 7.4V volts. The charging time must be doubled if the charge current is halved.
4 Amp Hour - 6 Volt• See table for specifications• Size: 70(L) x 47(D) x 106(H)mm
5.0 Amp Hour 6 Volt Lantern BatteryThis 6 volt 5Ahr rechargeable sealed lead acid battery suits those popular Dolphin style torches.• See table for specifications
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
7 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
12V 150Ah Sleek AGM Deep Cycle Battery This high performance deep cycle AGM battery offers an excellent power storagesolution to those with minimal space. A high energy density and top grade materialsallow such a high capacity of 150Ah to be packed into such a small footprint - just 123x 556mm, suitable to fit into a standard 23" rack. Front terminal access makes batteryconnections neat and simple, and the durable carry handles allow for easier handlingand inspection. Designed to perform in harsh tropical conditions, and with a superiorhigh rate discharge performance and higher cycle service life, this battery is perfect fora wide array of applications including remote solar systems, caravan and RV, motorhome, and marine. With a floatvoltage of 13.5V, this AGM batteryis perfectly suited to caravans tomake the most of charging off theengine alternator. See our websitefor a full specification datasheet.
• Small footprint to suitinstallations in tight areas such as marine, caravans or motor homes
• Design Float life of 12+ years in accordance with Eurobat classification of long life battery
• Suitable for standard 23" rack• Advanced AGM (absorbed
glass matt) separator offeringlonger service life and superiorhigh rate discharge performance
• Threaded post copper insert terminals offering high conductivity
• Fire retardant container and cover (UL40 - V0)• Compliant to IEC 60896-21/22:2004 and UL approved
Specifications SB-1822 Voltage 12V Float voltage 13.5V Boost voltage 13.8V Capacity 150Ah (10hr rate), 165Ah (20hr rate) Self-discharge < 1% per week Shelf life without re-charge Up to 6 months Operating temperature -40°C to 60°C Designs float life 12+ years at 27°C
These genuine deep-cycle batteries add to our already substantial range ofbatteries. As with all gel cells, they can be operated and charged in anyposition, are leakproof and completely sealed. Gel batteries are ideal forsolar power, camping, 4WD, auxiliary applications and anywhere deepdischarge and recovery is required. Three sizes available:
Self discharge 9% after 3 months (residual capacity 91%)
9% after 3 months (residual capacity 91%)
9% after 3 months (residual capacity 91%)
Dimensions W x D x Hmm 165 x 172 x 110 197 x 165 x 170 330 x 173 x 223
Weight 8.35kg 13kg 31.5kg Special Order NO NO YES
Deep Cycle Batteries
DEEP-CYCLE GEL CELL BATTERIES
LIMITED
Specifications SB-1800 SB-1802
Type Valve Regulated Lead Acid deep-cycle battery
Valve Regulated Lead Acid deep-cycle battery
Rating 12V 600Ah 12V 1350AhAh efficiency >90% >90%Charging voltage 2.23 - 2.3V per cell 2.23 - 2.3V per cellCharging current 60 - 120A 135 - 270ABank dimensions 706(W) x 477(H) x 550(D)mm 706(W) x 802(H) x 550(D)mmBank weight 260kg 530kg
Powerstack High Performance VRLA Battery Banks with RackingMaking a substantial investment in a large renewable energy orremote power system means you should have the best batterytechnology available. Able to withstand deep discharge to 0%capacity for 1000 cycles, the Powerstack battery banks are the lastword in genuine deep-cycle technology ensuring long service life.The modular, stackable rack design enables easy installation andoffers complete flexibility for future system expansion. This rackingis something that you just don’t get with other deep cyclebatteries, and makes such a difference to ease of use and flexibility
of installation. This significantly reduces your installation costs as you don’t have to go out and make yourown rack for your battery bank - that's all done for you with the Powerstack.
Each Powerstack comes fully loaded with six 2V deep cycle valve regulated lead acid (VRLA) cells, andincludes interconnecting busbars to connect up each cell to make the 12V bank. The construction of each cellis flame retardant copolymer casing with lead coated copper conductor terminals, the racking is steel paintedin acid resistant paint, and all parts can be recycled. Suitable for mining, defence, UPS backup, transmission,telephony as well as high end alternative energy systems and remote area power systems.
Due to the size and weight of these very specialised units they will only be available for dispatch direct fromour central warehouse in Sydney and Auckland. Freight will be additional - contact us for a quotation.
See our website for full specifications and downloadable datasheets.
HIGH CURRENT CHARGERSHigher current chargers steadily recharge larger lead acid batteries such as car, marineor high capacity deep cycle batteries. Available in simple models which need to bemonitored manually ie. disconnected when the battery is fully charged, and automatedmodels which monitor battery condition. Automated models have higher charge ratesand improve battery life as their control systems prevent overcharging. Jaycar does notstock simple chargers, only automatic types.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
8 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Battery Discharge Protector Protects your car battery from total discharge by switchingoff appliances such as fridges and TV sets before the batteryvoltage drops to an unrecoverable level. When batteryvoltage is re-established by recharging, it switchesappliances on automatically. The interrupting voltage isadjustable from 10.4.to13.3 VDC. Essential low-costinsurance if you have a dual battery setup in a boat,4WD, RV or for an alternative energy system such assolar or wind power.
Specifications AA-0262 Operating voltage 12VDC Max. switching current 20A Interrupting voltage 10.4 - 13.3VDC Resetting voltage approx. 0.8V (+/-0.3V) above interrupt voltage Current consumption < 0.7mA when OFF, < 1.6mA when ON Dimensions 87(L) x 60(W) x 32(H)mm
Battery Isolation SwitchesHigh current rated battery isolation switches for high power applications. Often fittedto boats, trucks, motor homes and other battery based power systems to allow forquick and easy electrical isolation of the battery for protection against discharge, fireand other safety risks. Each switch features high quality constructionwith large bolt-down terminals for electrical connection.
HIGH QUALITY 120A• Large removable key actuator• Continuous rating: 120A @ 12V• Surge rating; 500A, 60mm
diameter mounting plate
PROFESSIONAL 500AThe switch handle features a tight and secure spring loaded actuation, locking the switch into the ON position and requiring you to pull the handle out to turn it off, avoiding accidental battery isolation. Features heavy gauge M12 brass bolt terminals, cast metal body for extra strength and durability, and is also supplied with a right angle mountingbracket.
• Continuous rating (6-48VDC): 500A• Max rating (6-48VDC): 2000A (10 sec)• Dimensions: 70(D) x 100(H)mm
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 2 Position SF-2246 $ 39.95 $ 35.95 $ 31.95 4 Position SF-2248 $ 49.95 $ 44.95 $ 39.95
Operation On/Off Battery 1 on, Battery 2 on, Both batteries on, both batteries off
Operating range 8-50VDC 6-32VDCStud size 2x10mm 2x10mmDimensions 75(H) x 72(W) x 72(L)mm 134(L) x 134(W) x 71(H)mm
Battery Switches with Enclosure Simple 2 and 4 position battery switches for controllingbattery power on your boat, caravan, or other high currentbattery system. The 2-position version is a simple on/off turnswitch. The 4-position model allows you to switch power onfor 2 batteries at a time, or for eachindividually. Ideal if you have one batteryfor starting the engine and another forauxiliary electrical equipment.
• Durable design, with large indented grips that won't slip under wet hands.
Specifications BothContinuous rating 140A Intermittent rating 170AVoltage rating 12VDC (max 15VDC)Cut in voltage 13.7VDCCut off voltage 12.8V Isolator dimensions 67(L) x 67(W) x 53(H)mm
12V 140A Dual Battery Isolator Kit with WiringAllows two batteries to be charged from your engine alternator at the same time. Whenyour engine is on and the start battery is sufficiently charged the isolator kit will begincharging the second (auxiliary) battery simultaneously. When the voltage of the startbattery drops (i.e. the engine is stopped) the isolator kit disengages from charging theauxiliary battery. This isolates the start battery and eliminates the possibility of drainingit, ensuring that you always have enough charge to start your engine, and also protectssensitive electronic equipment powered from the auxiliary battery from harmful enginestart-up spikes. Suitable for 12VDC Marine, 4WD, caravan and solar applications. DualBattery Isolator available as a standalone unit - see MB-3685
• Emergency override feature• LED status indicator
Kit Includes:• 1 x Dual Battery Isolator with mounting screws • 1 x 6 metre length of 10mm square red cable terminated at both ends • 1 x 600mm black earth cable • 2 x Positive Marine battery terminals • 1 x Negative Marine battery terminal • 1 x SC25-10 Copper crimp lug • 2 x 16-8 Copper crimp lugs • 2 x Red heat shrink • 1 x Insulated blue ring terminal • 6 x 200mm cable ties
120A 12/24VDC Programmable Dual Battery Isolator This 120A 12/24VDC Programmable DualBattery Isolator can be fine tuned to meet yourvehicle's specific application. Often thealternator, main battery, house battery and loadchange with time, so this device allows you tofine tune key voltages and delay time setpoints, and constantly monitors each battery toensure the optimum charging current.
The reliable and efficient MOSFET switchingcircuitry has very little voltage loss, whichresults in much less generated heat comparedto diode based isolators.
Specifications MB-3688Operating Voltage 9 - 17VDC/18 - 34VDCContinuous Contact Current 120AmpDimensions 90(L) x 90(W) x 85(H)mmWeight 0.6kg
BATTERY MONITORING
Workbench sent to us by: Justin Jaycar Store: Thomastown Planned it on sketchup for about 2 months to make sure I had it right and then builtmy cave, my retreat.
Building, destroying, soldering and relaxing all happens here.
I love it !
For more details, visit:www.jaycar.com.au/workbench
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
9 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Digital DC Power Meters An ideal addition to any low voltage DC system this digital power meter features realtime display of the voltage, current draw, and power consumption. Once running it alsostores minimum and maximum voltage, current, and power, together with cumulativeamp hours and watt hours consumed by the connected equipment. Suitable for DCsystems from 5 to 60 volts and available in two versions for inline connection orremote connection with a separate current shunt. Both meters are mountable using theincluded snap-in bracket or magnetically on any ferrous surface and can be connectedto a PC using the MS-6174 USB data adaptor (sold separately).
• Dimensions: 45(W) x 41(L) x 23(D)mm• Operating current: 12mA peak• Measurement Specifications:• Voltage Range: 5-60VDC (0-60VDC with
external DC power source)• Wattage Range: 0-12,000W
Logging Specifications:• Cycle Time: 3 minutes• Maximum Amp Hours: 99,999Ah• Maximum Kilowatt Hours: 9,999.9kWh• Maximum Cumulative Log Time: 75 hours• Data download: Stored data can be transferred
to PC using MS-6174 data adaptor (sold separately)
Ò Current Range Cat. Qty 1 + Qty 4 + Qty 10 + 0 - 20A MS-6170 $ 89.95 $ 80.95 $ 71.95 0 - 200A MS-6172 $ 89.95 $ 80.95 $ 71.95 USB Data Adaptor MS-6174 $ 99.95 $ 89.95 $ 79.95
DIGITAL DC POWER METER WITH INTERNAL SHUNT• Continuous Current Range: 0-20A• Peak Current: 30A for 30 minutesMS-6170
DIGITAL DC POWER METER TO SUIT 50MV EXTERNAL SHUNT• Current Range: 0-200A depending on shunt• Suitable DC shunts: QP-5412 50A 50mV, QP-5415 100A 50mV, QP-5417 200A 50mVMS-6172
USB DATA ADAPTOR FOR DC POWER METERSEnhance the data collection of the MS-6170 or MS-6172 DCpower meter by connecting to your PC with this USB dataadaptor. The included software allows you to access livedata and download stored data from the power metermemory. Data is graphed to show power usage over timeand can then be exported for further analysis and loggingover long periods. Pack includes data interface module, datacable, USB cable, and PC software.
• Data module dimensions: 45(L) x 35(W) x 18(H)mmMS-6174
BATTERY MONITORING (CONTINUED)
TECH TALK
BATTERY MAINTENANCEPeriodic visual inspection of the battery is recommended.
If the battery is stored for over six months, it is recommended to charge and dischargethe battery several times to recover the battery capacity, failure to do so may result in aloss of capacity and shorter battery life.
Bear in mind that self-discharge has to be taken into consideration when storing acharged battery. The remaining battery capacity should be at least 50% after a month ofstorage at room temperature for a fully charged battery. High storage temperatures willaccelerate the self-discharge, and reduce the remaining capacity.
Universal Brass Battery Terminals
These heavy duty, solderless range of Marine grade brass battery terminals have gotyou connected. With five options available from universal saddle, lug bolt style, sidebarrel, end entry and not forgetting the built in isolating switch perfect for isolatingyour battery to prevent battery drain when not in use.
Sold in Pairs, POS - NEG, HC-4038 isolation type sold singular (Negative post only)
Multi-Connect Battery Terminal - Red This Multi-Connection Battery Terminal can be used toterminate up to 4 electronic devices. It can also be usedseparately as a bus-bar that connects to multiple devices.Perfect for simplify the wiring in the car, surveillance orsecurity system and other 12V applications where multiple accessory wiring is needed.
• Terminates up to 4 electronic devices• Red colour for positive connections• Does not need screws• Spade terminals included• Dimensions: 75(L) x 40(W) x 20(H)mm
Remote Battery Terminals - 250A This remote battery jumper terminal provides convenient accessto the vehicle battery for charging or jump starting.
• Suitable for cars, boats, trucks, caravans and other off-road equipment
• Aluminium panel provides easy mounting• Includes one positive and one negative post• Posts allow remote access to concealed
battery for jump starting or charging• Protective red & black rubber covers• Solid brass studs• 250A Maximum current rating• Terminal depth: 65mm• Mounting plate dimensions: 130(L) x 50(W) x 20(H)mm
Dual Battery Volt/Current Monitor This unit enables you to monitor your start battery voltage andtotal battery activity of your auxiliary battery. We all know it isessential to monitor your main (engine starter) battery and usean isolator to prevent it from being overly discharged, but it isalso extremely important to know what exactly ishappening with your "house power"system. This is valid for boats,4WDs, caravans/RVs etc., especiallywhen running inverters andrefrigeration. This fantastic dualbattery monitor serves that purposeby giving you the voltage of yourstart battery and house battery, aswell as the current (amps) flow onyour house battery - both charging anddischarging. To top it off, the unit warns you via a buzzer ifhouse battery falls below 11.5V (or over 15.5V). The display unit easily fits timberbulkheads up to 27mm thick, or sheet metal dashboards, and a 250A current shunt(75mV) is supplied which should suffice for all but the biggest installations.
• This product may save you a fortune from replacing damaged batteries.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
10 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
FUSED BATTERY TERMINALS
Battery Terminal FusesThese terminal fuses provide easy andeconomical circuit protection. They are ideal touse as circuit protection for your DC electricalsystem or battery banks. They are available in3 current ratings from 50, 100, and 200amps.They feature a clear transparent housing toprovide visual indication of blown condition.
Specifications AllRating 58VDCMaterial Ceramic bodyMounting hole 8.3mmDimensions 24(H) x 20(W) x 11(D)mm
SF-4180
SF-4184SF-4182
BATTERY BOXES, TRAYS & CLAMPS
Battery Boxes
Protect your batteries with these sturdy boxes. Perfect for mounting in your boat, traileror caravan. Includes mounting clamps and lid strap to secure the box properly in place.
Two models available:HB-8100 - Battery box to suit 40Ah SLA batteries• Dimensions: External: 365(L) x 270(W) x 265(H)mm
Internal: 260(L) x 180(W) x 200(H)mm
HB-8102 - Battery box to suit 100Ah SLA batteries• Dimensions: External: 460(L) x 265(H) x 260(W)mm
Internal: 380(L) x 200(H) x 205(W)mm
Ò External Dimensions Cat. Qty 1 + Qty 4 + Qty 10 + 365 x 270 x 265mm HB-8100 $ 29.95 $ 26.95 $ 23.95 460 x 265 x 260mm HB-8102 $ 39.95 $ 35.95 $ 31.95
Note: Battery not included Lead-Acid Battery ConditionerRemoves or reduces sulphation which kills batteries. Whenwet-cell lead-acid batteries are allowed to sit around theywill sulphate up in as short a time as 6 months. The sulphatebuilds up on the plates and separators. This product basicallydissolves the sulphation. The product is so good that themanufacturer will extend the warranty on a newbattery by a year if used when the battery is new.
• One bottle will do up to an N70Z size batteries (4WD, boat, truck etc).
Heavy Duty Steel Battery Trays These battery trays are pressed out of 1.2mm mild steel & vinyl coated to protectfrom acids, oils etc. They feature cruciform slots in the base to facilitate existingmounting holes in a truck or car chassis, as well as slots to allow battery hold-downrods. 2 sizes available:
BATTERY SECURING TRAY - SMALLDimensions: 280(L) x 200(W) x 45(H)mm HB-8104
BATTERY SECURING TRAY - LARGE Dimensions: 340(L) x 200(W) x 45(H)mmHB-8106
Note: Not recommended for marine salt water use.
Ò Cat. Qty 1 + Qty 4 + Qty 10 + Small HB-8104 $ 12.95 $ 11.35 $ 10.35 Large HB-8106 $ 13.95 $ 12.35 $ 10.95
Adjustable Universal Battery Hold Down Clamp Universal battery clamp which adjusts to suitbatteries ranging from 135-190mm width and 150-230mm height.
Run your outdoor aquarium, garden pond or water feature from the sun, eliminatingthe need for wiring or the safety aspects of electricity near water. Each comes with itsown solar panel, cable and pump assembly ready to go and has some electronic smartsbuilt in to regulate the delivery of power during cloudy periods.
Battery Box with Power Accessories No longer do you have to take a bird'snest of wiring and connections for yourdeep cycle battery when you gocamping; this extremely handy batterybox has all the common connectionsyou would typically need, along with aconvenient carry handle. Just fit your100Ah deep cycle battery into the box,connect up the positive and negativewires, and you are ready to go.Features an LED voltmeter to helpmonitor battery level, two high currentmarine grade cigarette power sockets,and high current bolt terminals toconnect your higher current loads suchas an inverter. Over current protectionincluded for the cigarette sockets.
• Dimensions: Internal: 355 x 220 x 290mm
Ò External Dimensions Cat. Qty 1 + Qty 4 + Qty 10 + 420 x 240 x 310mm HB-8500 $ 109.00 $ 97.95 $ 86.95
In the past, amorphous solar panels have been labelled as the cheap alternative for aninstallation where long service life is not important - however that is about to change.Recent years have seen vast improvements in thin-film solar technology, especially withamorphous silicon based solar panels, and we are now bringing those improvements toyou with our updated range of amorphous solar panels. Whilst these panels might lookthe same as any other amorphous panel, the difference lies within the visual exterior.On top of the features our amorphous panels have always had, they now boast dual-junction amorphous silicon with laser edged isolation construction. What does that
mean? It means that along with a small improvement in output efficiency they alsohave big improvements in the life expectancy of the panel - they will maintain above80% of their original rated power for 20 years. That's about as good as a polycrystallineor monocrystaline solar panel.
Beware of cheaper amorphous panels which don't offer these features, as theirperformance will surely degrade much faster and they will usually perform below theirrated specification.
WHAT’S THE CATCH?If you think that amorphous is too good to be true take a close look at their size. The big downsideto amorphous is that to get the same power as poly or monocrystalline you need 2-3 times thesurface area. This may or may not be a problem. On a yacht, yes, but on a farm probably no.
SO WHY WOULD YOU CHOOSE AMORPHOUS PANELS? Solar Panel Type Size per Watt Output under cloudy conditions Power Decrease due to Heat
Amorphous Bigger (2-3 times)
Yes - and for longer hours each day
-0.19% / °C (less power decrease)
Crystalline Smaller No - output drops significantly incloudy conditions -0.47% / °C
ZM-9026ZM-9020
1 WATT TO 4 WATT PANELSSpecification ZM-9020 ZM-9024 ZM-9026Maximum power 1W 2W 4WRated voltage 6V 12V 12VVoltage (@ Pmax) 7V 17.5V 17.5VCurrent (@Pmax) 143mA 115mA 286mAShort circuit current 150mA 150mA 450mAOpen circuit voltage 11V 21V 21V
Dimensions 162 x 162 x 22mm
160 x 313 x 22mm
330 x 330x 22mm
Weight 0.65kg 1.0kg 2.32kgWarranty 5 year 5 year 5 year
SOLAR PANELS - AMORPHOUS
Includes protectiveplastic corners andbattery clips
FLEXIBLE SOLAR PANELS
Semi-Flexible 12V Solar PanelsThese monocrystalline solar panels can be easily mounted on the curvedsurfaces of your boat deck or caravan to charge on-board batteries. Theflexibility of the solar cells is limited by the plastic base but will easily bendon the long axis to accommodate a yacht deck or RV roof. It is slightlyflexible on the short axis. Best of all, these units do not have a heavy rigidframe and are therefore light, and easy to stow away when you travel.
The solar cells are implanted in very distinctive and highly resilientpolymers that give durability. The flexible non-glass area of the solar panelis tough enough to walk on. We recommend that you add a solar chargeregulator to charge the batteries more effectively.
Specifications ZM-9149 ZM-9150 ZM-9151 ZM-9152 ZM-9153 ZM-9154 ZM-9156Max Power: (Pmax) 15W 18W 30W 40W 80W 100W 180WRated voltage 12V 12V 12V 12V 12V 12V 12VOpen Circuit Voltage (Voc) 23.7V 23.70V 23.7V 23.60V 18.5V 21.70V 20.30VShort Circuit Current (Isc) 0.82A 1.03A 1.62A 2.05A 5.58A 6.10A 11.57AMax Power Voltage (Vmp) 19.8V 19.4V 19.8V 19.50V 15.4V 17.70V 16.80VMax Power Current (Imp) 0.76A 0.93A 1.51A 2.33A 5.19A 5.70A 10.71ACable length 2 x 850mm 2 x 900mm 2 x 850mm 2 x 900mm 2 x 850mm 2 x 900mm 2 x 900mm
Dimensions 485(L) x 310(W) x3(D)mm
434(L) x 277(W) x 3(D)mm
860(L) x 310(W) x3(D)mm
535(L) x 415(W) x 3(D)mm
975(L) x 560(W) x3(D)mm
1050(L) x 540(W) x 3(D)mm
1305(L) x 796(W) x 3(D)mm
Check out ourRecreational Solar Packages in the Auto - Outdoors Section
TECH TALK!
APPLICATION GUIDE FOR SEMI-FLEXIBLE SOLAR PANELSOur semi-flexible solar panels are an excellent option for boats, campervans, caravans or camping power setups, as theyare a lot lighter and less bulky than their standard solar panel equivalent (only 3mm thick versus 27-35mm thick). Theirmain structure is a sheet of aluminium alloy material that is flexible, allowing you to bend the panel slightly to follow thecurves of your mounting surface for a slimline installation.
ZM-9024
Check out ourFolding Solar Panels in the Auto & Outdoors section
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
12 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
DON’T FORGET THESE ACCESSORIES:
These quality Powertech monocrystalline solar panels offer you thesame robust construction and performance as the leading brandnames, whilst also offering a nice cost saving. Despite beingmanufactured in China, they are definitely suitable for harshAustralian conditions.
Our Powertech solar panels are among the best to come out of Asia,and we are not alone in our beliefs! Our supplier has beenproducing solar panels for the large European market for severalyears, including manufacturing the panels for a 100kW solar plantin Greece & a 300kW solar plant in Spain.
When we visited their factory we were amazed at the high level ofquality control. Each individual cell is tested and measured beforeassembling the panel, and then each and every panel is tested andmeasured to IEC standards before shipping them out.
Unlike most of the Asian solar panelsuppliers, our factory actually performsthe silicon doping process in-house,which provides further quality controlover the end product as they are incontrol of the whole process from startto finish. Each panel is also uniquelyidentified with a barcode serial number for traceability and warrantypurposes, and the test results for each panel are logged with thatserial number - so you can rest assured our factory means to ensurethey supply a quality product & will stand by their claims of performance with our 25 year limited warranty.
5 WATT TO 40 WATT PANELS
SOLAR PANELS - MONOCRYSTALLINE - 5 WATT TO 200 WATT
Cat. ZM-9091 ZM-9093 ZM-9094 ZM-9095 Maximum power 5W 10W 20W 40W Rated voltage 12V 12V 12V 12V Open circuit voltage 21V 21.5V 21.5V 21.4V Short circuit current 380mA 680mA 1.3A 2.56A Voltage at max power 16.8V 17V 17.2V 17.1VCurrent at max power 300mA 590mA 1.17A 2.34A
Cat. ZM-9097 ZM-9085 ZM-9087 ZM-9088 Maximum power 80W 120W 145W 200W Rated voltage 12V 12V 12V 24V Open circuit voltage 21.8V 21.6V 22.8V 45.3V Short circuit current 5.23A 6.68A 8.06A 6.15A Voltage at max power 17.6V 17.2V 18V 37.8VCurrent at max power 4.55A 7.75A 8.96A 5.31A Dimensions 1200 x 540 x 28mm 1190 x 660 x 35mm 1250 x 808 x 35mm 1580 x 808 x 35mm Weight 8.2kg 11.5kg 12kg 15.5kg
UV Stabilised Solar System Power Cable - IP Rated Very tough cable, specifically for the rigours of outdoor use in solar panel installations.Dust, age and UV resistant, tinned copper conductors to minimise corrosion. Use with our PV connectors for complete environmental protection.
Cat. No Dia(mm) Current(A) Two types available: WH-3121 4mm sq. 58A WH-3122 6mm sq. 76A Conductor material: Tin plate copper, Class 5 Insulation material: XLPO Rated voltage: 1000VDC Temperature range: -40 to + 125°C TUV certification: 2 PfG 1161/01.06
NOTE: Our ZM-9088 (200W) panels are listedas approved modules by the Clean EnergyCouncil under the factory brands ZhejiangSopray or Talesun, models SR-200 orTP572M-200 respectively. The Powertechbrand is used for marketing purposes only.
TECH TALK!The larger (80W and above) panels arefitted with a TUV approved waterproofjunction box with cable glands. They haveshort UV stabilised output cables andbypass diodes included.
We will notbe undersold
on qualitypanels!
25 YEAR LIMITED WARRANTYAll Powertech monocrystalline solar panels are covered by a 25 year limitedwarranty. This warranty covers the panels for defects in construction andmanufacturing for a period of 5 years, and warrants that the electrical outputwill remain above 80% of its original rated output for a period of 25 years.
Motorhome ElectricsA comprehensive text written primarily for owners, designersand builders of caravans, campervans and motorhomes whoface unique power demands and challenges that most autoelectricians are ill-equipped to properly address. This bookspans the gap between auto electrical and alternative energydisciplines, providing thorough coverage of componentdefinitions and applications, as well as thoughtful andstraight-shooting advice on common electrical problems. Anengaging read for those with a general understanding on thesubject, it also features more technical in-depth sections toassist trade electricians. Written by acclaimed Australian authorand field expert Collyn Rivers, this is an essential reference for all caravan & motorhome enthusiasts.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
13 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
SOLAR PANEL MOUNTING HARDWARE
Ecotech Professional Solar Mounting Hardware A universal and code compliant mounting system for attaching solar panels to the roofof your property. Designed to be used with either tiled or tin roofs, with any slope from0-60° (either flat or pitched), and fully cyclone rated even for wind region D. The easyinsertion modules mean that you don't have to slide each attachment along the rail toget it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available.
• Cyclone proof to Wind Region D (installation guide must be strictly adhered to)• Vertical or horizontal panel mounting• Suits any solar panel width, but optimised for 800-825mm width• Suitable for aluminium framed panels• 10 year materials warranty• AS/NZS 1170 approved• Roof slope: up to 60°• Wind load: 80m/s• Snow load: 1.4kNm2
Cat. Qty 1 + Qty 4 + Qty 10 + Solar Panel Rail End Clamp 35mm HS-8804 $ 3.95 $ 3.45 $ 3.15 Solar Panel Rail Mid Clamp 35mm HS-8805 $ 3.95 $ 3.45 $ 3.15 Solar Panel Tile Roof Hook HS-8806 $ 26.95 $ 23.95 $ 21.35 Solar Panel Tin Roof Hook HS-8807 $ 8.95 $ 7.95 $ 6.95 Solar Panel Adjacent Front Leg Tilt HS-8810 $ 15.95 $ 14.35 $ 12.70 Solar Panel Mounting Back Leg 10-15° HS-8811 $ 39.95 $ 35.90 $ 31.90 Solar Panel Mounting Back Leg 15-30° HS-8812 $ 49.95 $ 44.90 $ 39.90 Solar Panel Mounting Back Leg 30-60° HS-8813 $ 59.95 $ 53.95 $ 47.90
Universal Individual Solar Panel Mounting Bracket Designed for mounting solar panels individually to afixed surface, such as the roof of a caravan, motorhome, shed, or any number of other applications.Not only do these brackets provide secure and easymounting, but they also space the panel up toprovide necessary airflow. Each bracket includes astainless steel M6 bolt and nut to attach it to thefactory holes in the aluminium frame of your solarpanel, meaning that no drilling or modification isrequired. Sold individually, so you just have topurchase the quantity that suits your panel andapplication.
• Made from 6061 aluminium alloy• Recommended quantity for panels up to 40W: 4• Recommended quantity for panels 40W-200W: 6• Spacing from mounting surface: 22mm• Dimensions: 80(L) x 68(W) x 35(H)mm
Aluminium Solar Panel Angle Mounting Bracket An ideal solution for mounting a single solar panel to any number of variousapplications, allowing you to tilt the panel to your desired angle and easily fold itback down again when not in use. Fantastic for caravan, RV, campervan, marine orother applications. Holes are pre-drilled to line up with common panel sizes such as80W saving you time and effort in mating your panel to the bracket. Supplied withfull stainless steel hardware.
ABS Solar Panel Mounts for Caravan/Marine Attaching solar panels to the roof of your caravan or the deck of your boat may soundlike a relatively straight forward procedure - if you are happy to drill holes. If you'vejust sunk tens of thousands of dollars into your caravan or boat, that's probably the lastthing you want to do, which is why we have introduced this range of ABS solar panelmounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravanor boat using Sikaflex®, and then screw your panel onto the mount. The solar panel iskept with adequate space underneath for cooling, and the curved design ensuresadequate wind deflection for high winds. There are 4 different products, which can beused in any combination to suit your specific application. White in colour.
ABS SOLAR PANEL CORNER MOUNTS - SET OF 4, CAT. HS-8860A set of four corner mounts, to attach each cornerof your solar panel to your desired mountingsurface. These can be used on their own for solarpanels 40W or smaller.
• Dimensions: 150(L) x 150(W) x 65(H)mm
ABS SOLAR PANEL SIDE MOUNTS 180MM -PAIR, CAT. HS-8862This pair of side mounts are intended to be attachedto the long edge of taller solar panels, such as 80Wand above, adding extra mounting strength andgiving more wind deflection.
• Dimensions: 180(L) x 120(W) x 65(H)mm
ABS SOLAR PANEL SPOILER MOUNTS 510MM - PAIR, CAT. HS-8864Specifically designed to deflect wind onsolar panel edges that face into highwinds, such as the leading edge of solarpanels mounted on caravan or RVrooftops. Well matched to 80W and90W panels oriented with the shortedge leading into the wind.
• Dimensions: 510(L) x 120(W) x 65(H)mm
ABS SOLAR CABLE ENTRY POINT, CAT. HS-8866Usually, at some point the solar power cables need toenter into the caravan or boat and down to thebattery area. To avoid making unsightly andpotentially leaky cable entries, you can use this neatproduct and drill out your cable entry point, and thencover it over giving you two fully waterproof cablegland cable entries that look neat and purpose built.
• IP67 cable glands included• Dimensions: 100(L) x 90(W) x 45(H)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
14 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Solar Panel 'Y' Leads Used for connecting the output of two solar panels in parallel or connecting multiplepanels in an array. Waterproof and UV resistant. • Pin dimension 4mm • Tin plated copper contacts • Contact resistance <5m ohm • IP67 rated • -40°C to +90°C • Housing material PPO • TUV certified. • Both are 300mm long.
2 SOCKETS TO 1 PLUG Generally used on the positive pole of the panel.
2 PLUGS TO 1 SOCKET Generally used on the negative pole of the panel.
PS-5110
PS-5112
Ò Size Cat. Qty 1 + Qty 10 + Qty 50 + Female Inline PS-5100 $ 7.50 $ 6.75 $ 5.95 Male Inline PP-5102 $ 7.50 $ 6.75 $ 5.95 Female Panel Mount PS-5104 $ 7.50 $ 6.75 $ 5.95 Male Panel Mount PP-5106 $ 7.50 $ 6.75 $ 5.95
Waterproof Solar Power “PV” ConnectorsIP67 rated for maximum environmental protection, these photovoltaic (PV) systemconnectors are ideally suited to harsh installations such as solar panel arrays and otherpermanent outdoor applications. When matched with our solar power cables WH-3120and WH-3122, you can leave your cabling out in the open with the knowledge that youwill never have a bad connection or an oxidised power cable. Both panel mounting andin-line connectors are available to suit a wide range of system applications:
• Pin dimension 4mm • Tin plated copper contacts• Contact resistance <5mΩ• IP67 rated• -40°C to +90°C • Housing material PPO• TUV certified PP-5102
PP-5106
PS-5100
PS-5104
Specifications AllRated voltage 1000VDCRated current 30A at 70°C, 25A at 85°CContact resistance <5 milliohmsTemperature range -40 - 90°CTUV certification 2 PfG 1161/01.06
SOLAR PANEL MOUNTING HARDWARE (CONTINUED)
DIN Rail Mounting AC Circuit BreakersDIN rail mounted circuit breakers for domestic and commercialswitchboards, fuse boxes, distribution boards etc.
• Standard DIN profile. • Electrical safety authority approved.
Ò 240VAC Cat. Qty 1 + Qty 4 + Qty 10 + Single Pole - 10A 240VAC SF-4150 $ 4.95 $ 4.45 $ 3.90 Single Pole - 16A 240VAC SF-4151 $ 4.95 $ 4.45 $ 3.90 Single Pole - 20A 240VAC SF-4152 $ 4.95 $ 4.45 $ 3.90 Single Pole - 32A 240VAC SF-4153 $ 4.95 $ 4.45 $ 3.90
CIRCUIT PROTECTION FOR PV APPLICATIONS
Non-Polarised DC Micro Circuit Breaker (MCBs)Under the latest revision of the standards for solar installations that are now in effect, AS/NZS5033:2012, over current protection for solar PV arraysmust use non-polarised DC circuit breakers. This 2-polenon-polarised DC breaker meet the requirements of thestandard by complying to IEC 60947-2.
4 Way Lockable IP66 Circuit Breaker EnclosureDesigned to take the range of DIN rail circuit breakers.Standard 4-pole ABS enclosure, spring loaded clearfront cover with padlock tabs, top, bottom and rearcable entry, DIN rail included, sealed to IP66. Suitablefor electrical installations or solar applications.
Fuse Holder/Disconnector for HRC Fuses (NT00) This high powered 3 pole fuse link holder is ideal for use to protect high current applications used in modernsolar/inverter installations.
The fuse holder supports up to 3x fuse links of up to 160A each (sold separately).Features a pull down knife switchdisconnection handle so system can be shut down quickly if the need arises.
• Suits NT00 size low voltage high rupturecapacity (HRC) fuse links.
Specifications AllRated insulation voltage (AC) 690V Rated insulation voltage (DC) 250V Current (max) 160A (per circuit)Dimensions 105(W) x 200(H) x 83(D)mm SF-4166
Note: Fuses not stocked at all stores. Call ahead to check and order in.
Ultra High Current FusesLittelfuse® patented technology designed for high current protection, found OEM on Ford, GM and Chrysler vehicles. Slo-Blo® feature eliminates nuisance blowing during temporary, shortduration overloads. Commonly used for batteryand alternator connections and other heavy gaugecables requiring ultra high current protection.
• SF-1982 and SF-1984 are slow blow fuses
• SF-1986 is a short-circuit protection device
• Rated up to 32V AC or DC. • Terminal studs 8mm.
HIGH CURRENT FUSE HOLDER Cat SF-1980BOLT-DOWN FUSE 125A Cat SF-1982BOLT-DOWN FUSE 250A Cat SF-1984
Fuse Holder/Disconnector for HRC Fuses (NT1) A high current 3 pole fuse link holder idealfor use in high current applications such assolar, battery and inverter installations.The fuse holder supports up to 3x fuselinks of up to 250A each, sold separately.Features a pull down knife switchdisconnection handle so system can beshut down quickly if the need arises.
• Suits NT1 size low voltage high rupturecapacity (HRC) fuse links.
Specifications BothRated insulation voltage (AC) 690V Rated insulation voltage (DC) 250V Current (max) 250A (per circuit)Dimensions 185(W) x 245(H) x 110(D)mm
Note: Fuses not stocked at all stores. Call ahead to check and order in.
Note: Fuses not stocked at all stores. Call ahead to check and order in.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
15 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Stainless Steel Power Distribution Posts
Heavy duty stainless steel posts mounted on a moulded plastic base. Three versionsavailable with single connection or dual post with bridging plate to suit a variety ofpower distribution applications.
• Mounting hole diameter: 4.5mm• Mounting hole spacing: 36mm between centres• Dimensions: 45(W) x 43(L) x 35(H)mm
12V 5A Battery Charging Regulator for Solar Panels Designed for efficiently charging 12V batteries using solar cellsrated up to 5 amps. It is easy to wire up, prevents batterydischarge during low sunlight and indicates charging andfull battery conditions using a yellow and green 3mm LED.
• Ideal for charging 12V SLA batteries from solar panels up to 60 watts.
• 5 amp fuse and fuse holder recommended - not supplied.
Specifications AA-0348Input 14 to 22V (open circuit voltage), nominal 12VMax. input current 5AInrush voltage battery voltage < approx. 13.2VInterrupting voltage battery voltage > approx. 13.9VOwn power consumption <3.9mA (LED's on)Dimensions 72(W) x 50(D) x 43(H)mm
12V 8A Water Resistant PWM Solar Charge Controller Suitable for both wet-cell and sealed lead-acid batteries and uses pulse widthmodulation for optimal 3-stage charging. It is compatible with all types of solar arraysand is potted in epoxy resin making it water resistant and suitable for use in areas ofhigh humidity, such as outdoor or mounted to the back of a solar panel. The controlleralso features a "night light" load output which will automatically connect the loadduring the evening and disconnect it during the daytime, which also has low-voltagedisconnect/re-connect protection. Reverse current flowing through the solar array isautomatically blocked in this unit which removes the requirement for a separateblocking diode, and different charge voltages are selectable for wet or sealed type lead-acid batteries.
• Over current, over voltage, short circuit, overtemperature and reverse polarity protectionsalso featured.
Specifications MP-3720 Max PV open circuit voltage 26VDC Max PV short circuit current 10A Battery voltage 12VDC Rated PV input current 8A (10A max) Load voltage 12VDC Rated load current 8 amps (10A max) SLA charging voltage 14.5VDC Wet cell charging voltage 14.8VDC Float voltage 13.8VDC Standby current consumption 7mA Dimensions 97(L) x 46(W) x 26(H)mm
12V 20A Super Solar Panel RegulatorWith a massive 20 amp current handling, this switching solar panel regulator islightweight, easy to install and does not require a heatsink. It installs easily and featuresautomatic operation, LED power indication and boasts an efficiency up to 99.2% @ 20amps. Not only does the regulator switch the solar panel in and out depending on thebattery voltage, the regulator will disconnect the solar panel after approx 20 minutes atnight fall to prevent any losses into the panel overnight. Completely Automatic.
• Battery or solar power LED indication• Suitable for 1 to 20 amps• Handles open circuit panel voltages 32 Volts• Reverse Polarity Protected
10 amps, 99.2% @ 20 ampsWeight 75 gramsDimensions 66(L) x 51(W) x 34(H)mm
RELATED PRODUCTS
Solar that Really WorksThe sun God Ra has been raining down free energy for about 4.5billion years and only in recent years have humans developed thetechnology to capture it. This is an informative book that takes apractical look at the do's and don'ts of solar installation fromcaravans to fishing lodges. Contained within are detaileddescriptions of working solar systems with illustrations. You won't be left asking questions as the author has everything covered.
• Softcover, 82 pages, 290 x 210mm
Ò Cat. Qty 1 + BE-1535 $ 49.95
Solar Success - Getting It Right Every TimeA complete guide for home and remote property systems, this bookis about using solar energy to reduce the fossil fuel generatedelectricity that produces our carbon footprint. A pragmatic no-nonsense approach written by acclaimed Australian author CollynRivers, who walks the walk by showing his self-installed solar system on his 100% solar powered 10-acre property in the Kimberley.
Solar Charge Controllers You make a substantial investment in asolar power setup, so make sure you lookafter your expensive batteries. With thesecharge controllers, you have total controlover battery charging and power usage.The LCD shows the system status and LEDsat a glance show battery charge status,load status and solar panel connection.They also have features likemicroprocessor control, programmed with 3-stage charging algorithms and pulse width modulation duty cycles of 0 - 100% to provideoptimum charge conditions and battery life. 12V and 24V models available.
• User-adjustable charging voltages• Suitable for wet or sealed lead-acid, lead calcium, lead
antimony, Ni-Cd or NiFe batteries• Microprocessor control PWM (Pulse Width Modulation)
for optimum charging• 3-stage, bulk, absorption and float charge modes with
status on LCD• Amp-hour logging readouts in 3 sets, today & last 2 days• 5-state LED indications of battery levels• Electronic overcharge protection and back current blocking to panel• Dusk to dawn automatic on-off with 10 selectable on-off programs• Adjustable battery low voltage level disconnect and reconnect for DC outputs• System status display: charge current, battery voltage and capacity• Overload and short circuit protection• Over voltage and reverse polarity protectionThree models in this range: Specifications MP-3129 MP-3722 MP-3724Rated charge/load current 20A 30A 20ASystem voltage 12V 12V 24V
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
16 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
SOLAR REGULATORS / CHARGE CONTROLLERS (CONTINUED)
SunStar Advanced MPPT Solar Charge Controllers True commercial grade MPPT solar charge controllers from Rich Electric, with a wholehost of features to suit almost any system. These controllers feature high grademaximum power point tracking (MPPT) to provide maximum efficiency in convertingsolar generated power into battery charging. With a wide solar (PV) input voltage rangeand ability to charge either a 12V, 24V, 36V or 48V battery, these MPPT controllers can
be used in any number of different system applications. The two auxiliary relay outputscan also be configured to do such tasks as start up a generator with remote start, orcontrol a dump load so that you can also incorporate a wind generator into the system.With the ability to parallel stack up to 16 units, they can even be applied to solar arraysup to 60kW! See user manual on our website for full features and specifications.
• Continuous output power has NO DE-RATING at up to 50°C ambient temperature• Supports flooded lead-acid, GEL, AGM and LiFePO4 batteries• Full 4-stage battery charging• Built-in energy monitor tracks power production and consumption to calculate
the capacity remaining in the battery (requires external current shunt)• Built-in backlit 2 line LCD character display• Data logs total energy harvested for last 90 days, displaying in Wh, kWh or Ah• Two programmable auxiliary relay outputs available • Multiple units can be stacked for larger systems (up to 16 units in parallel)
MP-3736Specifications MP-3736/MP-3733Max charge current (continuous at 50°C) 50A (MP-3736), 80A (MP-3733)Battery voltage 12V, 24V, 36V or 48VMax PV input current 40A (MP-3736), 70A (MP-3733)Input voltage range 16-112VDC operating, 140VDC open circuitEfficiency >95%DC to DC conversion capability
Max PV array 3250W (MP-3736), 5200W (MP-3733), max when equalising 48V battery to 65V
Charging modes bulk, absorption, float, auto/manual equalisationBattery temp compensation 5.0mV per °C per 2V of batteryStandby power <2WOperating temp full output power up to 50°C ambient
Dimensions 268(H) x 196(W) x 147(D)mm (MP-3736), 415(H) x 225(W) x 147(D)mm (MP-3733)
Weight 4.3kg (MP-3736), 7.1kg (MP-3733) Note: Not stocked at all stores but can be ordered
TECH TALK!
SOLAR CHARGE CONTROLLERS Directly connecting a solar panel or array to a battery can be catastrophic as solar panelscan output a wide voltage range. As an example, a nominal 12 volt rated panel can outputanything up to 22 volts during an average sunny day. A solar charge controller betweenthe panel and the battery ensures the battery receives the correct output voltage andcurrent from the panel to minimise the risk of the battery being overcharged or dischargingback into the panels. Charge controllers come in a variety of types which give differentperformance and can be matched to simple recreational applications all the way up tocomplex high power solar array installations
SWITCHING: Simple switching controllers connect the panel to the battery when the panel is providingpower and the battery is not fully charged. This type of controller is low cost and only goodfor basic solar equipment setups such as standby lighting, etc where the panel yield is farhigher than the load requires.
PWM: Pulse width modulated (PWM) controllers continually apply voltage pulses to the batterywhenever the panel is providing sufficient voltage. The pulse width (or duration) is variedby the controller depending on the charge state of the battery to ensure the correctamount of charge is harvested from the panel whenever it is available. As a result, PWMcontrollers provide a much higher power yield than simple switching controllers.
MPPT: Maximum power pointtracking (MPPT)controllers maximizepower conversionbetween the paneloutput and the batteryinput by using a DC toDC switchmode powerconverter. Bycontinuously trackingthe panel output andadjusting the converterthey yield the maximumamount of power underwidely varying solarconditions. MPPT controllers give the best solar system efficiency and improve solarsystem power yield by a significant percentage.
Both PWM and MPPT controllers are available with display panels which allow you totrack performance of the solar system. Panel voltage, battery voltage, charging current,and total charge supplied can be easily displayed so you can ensure the system isrunning correctly. More complex models also include integration functions to remotelycontrol other equipment or be linked into advanced systems.
LOOK FOR our new range of Pure Sine Wave Inverters withBuilt-In Solar Regulators on page 21
12V/24V 30A MPPT Solar Charge Controller MPPT technology uses DC to DC conversion along with some electronic smarts to be able to extract the absolute maximum charging power from your solar panels, giving you up to an extra 10-40% from your solar panels when compared to a normal PWM charge controller. Adding to the benefits of MPPT technology are the features of this charge controller, such as 3-stage battery charging, twin timer programming, 30A load control with automatic load disconnection/reconnection, and much more. Programming is simple and intuitive via the front panel buttons whilst the LCD screen shows you what's happening. Suitable for 12V or 24V systems.
• Microprocessor controlled MPPT• 3-stage charging• 30A automatic load control with
low-voltage disconnect/reconnect• LCD display• Two timers available for programming• Includes temperature sensor for battery
charging compensation• Protection against over voltage, reverse
connection, short circuit, over current, and over temperature
NOTE: This unit WILL charge a 12V battery from 24V solar panels, but not vice versa.
Specifications 12V Battery 24V Battery PV nominal voltage 12V or 24V 24V Max PV array 360W 720W Max PV open circuit voltage 65V 65VBulk charge (adjustable) 13.80-14.8V 27.6-29.6VFloat voltage (adjustable) 13.0-14.0V 26.0-28.0VMax charge current 30A 30AMax load current 30A 30AAmbient temp range -20°C - 50°C -20°C - 50°CEfficiency 97% 97%Dimensions 205(L) x 145(W) x 55(H)mm
Suits laptop computers, recharging powertools or batteries, lamps and fluorescents upto 150W, fax machines etc.
Specifications MI-5102Output power continuous 150WOutput power surge 450WStandby current < 300mAInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output N/A Input connection Cigarette lighter plugWeight 0.85kgDimensions (L x W x H) 165 x 91 x 58mm
INVERTERS - MODIFIED SINE WAVE RANGE - STANDARD RANGE
TECH TALK!
WHAT TO BUY - SINE WAVE OR MODIFIED SINE WAVE?“Modified” sine wave is a crude approximation of the 240V waveform, with squarewave components in it. Many appliances are OK with this. Typically these are :
• Most TVs, VCRs CD/DVD players • Small power tools • Fax machines • Some audio equipment • Computers (most) • All incandescent lighting • Most switchmode power supplies
Sine wave is closer to mains and those inverters are much more efficient. Most appliances work OK with the lower cost modified sine.
Sine wave inverters are best for: • Electric clocks • Sensitive equipment • Electronic weighing machines • Mains powered PA equipment • All other TVs • Plug pack powered equipment• Anything where you want to get the
most out of a battery charge
INVERTERS COMPARISON GUIDE
Getting 230VAC to run small electrical appliances from your cars battery is easy with our range ofgeneral purpose inverters. We have models suitable for charging your laptop in the bush to runninga microwave in a motor home. They have fan assisted cooling and electrical isolation for safety.
Use our selection guide to help choose...
Wattage Input Waveshape Solar Regulator Surge Input Connection Page Cat.
150W 12V Modified Sine 450W Lighter Plug 17 MI-5127150W 12V Modified Sine 450W Lighter Plug 17 MI-5102300W 12V Modified Sine 1000W Screw Terminals 18 MI-5104360W 24V Pure Sine 720W Heavy Duty Screw-down Terminals 22 MI-5703400W 12V Modified Sine 1200W Screw Terminals 18 MI-5106400W 24V Modified Sine 1200W Screw Terminals 18 MI-5107600W 12V Modified Sine 1500W Bolt Terminals 18 MI-5108600W 12V Pure Sine 20A 1200W Heavy Duty Screw-down Terminals 21 MI-5720800W 12V Modified Sine 2000W Bolt Terminals 19 MI-5110
1000W 12V Modified Sine 2500W Bolt Terminals 19 MI-51121000W 12V Pure Sine 30A 2000W Heavy Duty Screw-down Terminals 21 MI-57221500W 12V Modified Sine 3500W Bolt Terminals 19 MI-51141500W 12V Pure Sine 30A 3000W Heavy Duty Screw-down Terminals 21 MI-57242000W 12V Pure Sine 4000W Heavy Duty Screw-down Terminals 22 MI-57102000W 24V Modified Sine 4500W Bolt Terminals 19 MI-51162000W 24V Pure Sine 4000W Heavy Duty Screw-down Terminals 22 MI-5712
INVERTERS - MODIFIED SINE WAVE RANGE
Getting 230VAC to run small electrical appliances from your cars battery is easy with our range of general purpose inverters. We have models suitablefor charging your laptop in the bush to running a microwave in a motor home. They have fan assisted cooling and electrical isolation for safety.
150W Can-Sized Power Inverter with 2.1A USB Output Fits in the car's cup holder, plugs into the cigarette lighter socket and outputs230VAC to power a variety of 230VAC equipment from a battery charger to a laptoppower supply. Also features a USB port with 2.1A output, allowing you to quicklycharge many modern electronics gadgets, including power-hungry Tablets. It alsofeatures electrical isolation to prevent sudden mains voltage at your cigarette lightersocket.
• Powered by cigarette lighter socket adaptor• Modified sine wave• USB Output: 5VDC 2.1A• Dimensions: 165(L) x 60(Dia.)mm
Leads supplied with unit.Suits laptop computers, recharging power tools or batteries, lampsand fluorescent lights up to 300W, portable TV sets.
Specifications MI-5104Output power continuous 300WOutput power surge 1000WStandby current < 300mAInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection Cigarette lighter or aligator clampsWeight 1.1kgDimensions (L x W x H) 190 x 91 x 58mm
400 Watt (1200 Watt Surge) 12VDC to 230VAC Electrically Isolated
Suits laptop computers, recharging power tools or batteries, lamps and fluorescents up to 400W,54cm televisions, 100W Halogen worklight, electric fan, fax machines etc.
Specifications MI-5106Output power continuous 400WOutput power surge 1200WStandby current < 300mAInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection Screw terminals and aligator clampsWeight 1.2kgDimensions (L x W x H) 190 x 91 x 52mm
Lead supplied with unit.Suits laptop computers, recharging power tools or batteries, lamps and fluorescentsup to 400W, 54cm televisions, 100W Halogen worklight, electric fan, fax machines etc.
Specifications MI-5107Output power continuous 400WOutput power surge 1200WStandby current <300mAInput voltage 24VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB Output -Input connection Screw terminals and aligator clampsWeight 1.2kgDimensions (L x W x H) 190 x 91 x 52mm
Suits laptop computers, recharging power tools or batteries, lamps andfluorescents up to 600W, 68cm televisions, power drills, blenders etc.
Specifications MI-5108Output power continuous 600WOutput power surge 1500WStandby current < 300mAInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection 1m lead with eye terminalWeight 1.7kgDimensions (L x W x H) 242 x 91 x 58mm
Ideal for Trucks
INVERTERS - MODIFIED SINE WAVE RANGE - STANDARD RANGE (CONTINUED)
TECH TALK!
Our inverter lineup includes models that have dielectric insulation between the12V(24V) primary and the high voltage (AC) secondary. This means that there is nopath for the 240V to appear at the battery bank terminals. The reason for this, ofcourse is safety. Many people these days connect inverters permanantly intomultiple earth neutral (M.E.N.) 240V house wiring in order to have the convenience ofbackup power. This is quite common also in buses, RVs and boats which have theirmains usually wired to M.E.N. standards. The problem with this is that a situation can occur where in an autotransformerwound inverter, mains can appear on one side of the battery.
You could be working on the batteries in the bilge of a boat, for example, connectedto shore power and under a very possible set of circumstances, get electrocuted. Ifthere is no electrical path between the mains 240V and the battery bank you areintrinsically safe. And yes, the great percentage of people use inverters that are notconnected to the mains grid and therefore the secondary is floating and fairly safe.As we cannot guarantee the end use of our inverters, we decided to take this step.Note: We recommend that you take the prudent step of earthing the negative batteryterminal anyway when installing our new inverters in permanent M.E.N. installations.
Suits lamps and fluorescents up to 800W,68cm televisions and VCRs, power drills,blenders, belt sanders etc.
Specifications MI-5110Output power continuous 800WOutput power surge 2000WStandby current < 800mAInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection Bolt eye terminalsWeight <4.0kgDimensions (L x W x H) 310 x 205 x 75mm
1000 Watt (2500 Watt Surge) 12VDC to 230VAC Electrically Isolated
Suits lamps and fluorescents up to 1000W,68cm televisions and VCRs, power drills,blenders, microwave ovens, belt sanders etc.
Specifications MI-5112Output power continuous 1000WOutput power surge 2500WStandby current < 800mAInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection Bolt eye terminalsWeight 5.0kgDimensions (L x W x H) 310 x 205 x 75mm
Suits lamps and fluorescents up to 1500W, 68cmtelevisions and VCRs, power drills, blenders, microwave ovens, belt sanders, computers etc.
Specifications MI-5114Output power continuous 1500WOutput power surge 3500WStandby current < 1AInput voltage 12VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection Bolt eye terminalsWeight 5.6kgDimensions (L x W x H) 395 x 240 x 90mm
Lead suppliedwith unit.
2000 Watt (4500 Watt Surge) 24VDC to 230VAC Electrically Isolated
Specifications MI-5116Output power continuous 2000WOutput power surge 4500WStandby current <2.5AInput voltage 24VDCOutput waveform Modified sine waveOutput regulation -Efficiency >90%USB output -Input connection Bolt eye terminalsWeight 6.2kgDimensions (L x W x H) 395 x 240 x 90mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
20 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
200W 12VDC TO 230VAC Pure Sine Wave - Electrically Isolated This 12VDC to 230VAC inverter will allow you to have 230VAC power on the go and includes a 5VDC 2.1A USBpower socket to charge your smart devices. It features input voltage and output overload protection. Hightemperature protection automatically shuts the inverter down when it reaches a predetermined temperature, thenrestarts once the temperature has dropped to a lower level.
400W 12VDC TO 230VAC Pure Sine Wave - Electrically Isolated This 12VDC to 240VAC inverter includes a 5VDC 2.1A USB power socket to charge your smart devices. It featuresinput voltage and output overload protection. High temperature protection automatically shuts the inverter downwhen it reaches a predetermined temperature, then restarts once the temperature has dropped to a lower level.
Specifications MI-5728Output power continuous 400WOutput power peak 450W (10min)Output power surge 800W (1sec)Current in standby mode <1000mAInput voltage 10.5-15.3VDCOutput wave form Pure sine waveEfficiency >86%Output regulation ±5%Output frequency 50HzUSB output 5VDC @ 2.1ADimensions 213(L) x 100(W) x 60(H)mmWeight 870gInput connection Heavy duty screw terminalsRemote control None
Specifications MI-5726Output power continuous 200WOutput power peak 270W (10min)Output power surge 400W (1sec)Current in standby mode <750mAInput voltage 10.5-15.3VDCOutput wave form Pure sine waveEfficiency >86%Output regulation ±5%Output frequency 50HzUSB output 5VDC 2.1ADimensions 189(L) x 100(W) x 60(H)mmWeight 702gInput connection Removeable alligator clampsRemote control None
Circuit ProtectionOutput overload Beeps 3 times and LED flashesThermal alarm and shutdown > 70°CBattery low shutdown 10.5VDCHigh battery shutdown 15.3VDC
Circuit ProtectionOutput overload Beeps 3 times and LED flashesThermal alarm and shutdown > 70°CBattery low shutdown 10.5VDCHigh battery shutdown 15.3VDC
TECH TALK!
We DO NOT recommend that you use these products to operate the following: • FRIDGES • AIR COMPRESSORS • AIR CONDITIONERS
An inverter is a device which converts 12 or 24VDC into 240VAC. The 240VAC generatedis as lethal as the power in homes, and should be treated with the same respect.Inverters can be easily damaged, and connecting the input voltage terminals the wrongway around on the battery can damage the unit - be careful!!
Appliances most suitable for connection include:• most power tools • lights • most TVs • video recorders / players • most computers • fax machines • most audio equipment
Fluorescent lights can give a highly inductive load on start up which can damageinverters. Appliances not suitable include:• electric blankets • toasters • hair dryers • irons • radiators • heavy power tools (large angle grinders, circular saws etc)
Inverters will generally drive inductive loads such as electric motors, but only if thestartup current is not high. Generally high startup current situations are when the motoris permanently coupled to a load such as a refrigeration or airconditioner compressor(Imagine the compressor at rest just before top dead centre you can easily realise thestart up load on the motor!). Many other motors such as in drills, small angle grinders,buffers etc start up under virtually no load and this is usually OK for the inverterprovided the tool is within the inverter rating. It needs to be pointed out that one of themajor differences between a domestic power point and inverter is that the sourceimpedance of a power point is very low compared to the inverter. This is why invertershave trouble with appliances with high start up currents and a domestic power pointdoes not. Another thing that must be remembered is the special case of fluorescentlights with ballast chokes in them (by far the most common type).
Manufacturers of fluoro lights assume that they are just going to be installed to a normal240V 50Hz sine wave supply. They are required to supply a product that does not overlydistort the mains waveform. They generally comply with this by installing a, say, 3.3μFnon polarised capacitor accross the mains/neutral supply inside the housing of the lampfitting. This is called a power factor correction capacitor. This seems to work OK for asine wave supply from a low source impedance. When you drive such a device withmodified sine wave 240V power, different things start to happen. The power factorcorrection capacitor presents a much greater load to a modified sine wave signal(which is a complex collection of high and low frequencies) than it would if it was a sinewave. The bottom line is to reduce this capacitor to about 0.47μF or take it outcompletely. Inverters are generally OK then. It is also possible for an inverter to bedamaged by the surges in current generated when using standard flourescent starters.This can be prevented by replacing the starter with an electronic starter.
WHEN TO & WHEN NOT TO USE INVERTERS
INVERTERS - PURE SINE WAVE RANGE
We are delighted to introduce a new range of sleek, lightweightand portable pure sine wave inverters to this year’s catalogue line-up.
The two models described below are designed to handle a highpeak power and surge to power large devices that have high initialcurrent demands.
They also feature over and under voltage protection, and hightemperature protection that switches the inverter off automatically,and then switches back on again once suitable operating levelsreturn. There is a USB port with 2.1A fast charging output tocharge your Smartphone, Tablet and other USB devices.
All built within a sturdy housing, design is built to last.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
21 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
600 Watt 12VDC to 230VAC Pure Sine Wave Inverter with 20A Solar Regulator
12VDC Pure Sine Wave inverters with built-in solar charge controller. A trulyversatile inverter range that is perfect for off-grid solar power system incaravans, yachts, holiday houses, outback shed, and any standard applicationwhere inverters are used. The built-in solar charge controller means you canconnect solar panels (without regulator) directly to the inverter to rechargesuited batteries or battery banks. This is achieved by a single batteryconnection to the inverter that allows a charge and draw simultaneously orindependently. The pure sine wave AC output makes them suitable to powermost mains appliances within their continuous power output. Ranging from
600W to 1500W, each model includesimportant protections features such asreverse polarity, battery over/undervoltage, overload and over temperature. All models feature 2 x standard230VAC mains outlets, two USB ports for powering or charging USB devicesand an LCD on the unit and on the included remote control that providesimportant information such as Battery Voltage, DC Input Current, OutputPower, Battery Level and DC Charging Current.
INVERTERS - PURE SINE WAVE WITH BUILT-IN SOLAR REGULATORS
Specifications MI-5724Output power continuous 1500WOutput power Surge 3000WStandby current 750mAOutput voltage 230VACInput voltage 12VDCOutput wave form Pure sine waveEfficiency >90%Output regulation ±3%Output frequency 50Hz2 x USB ports output 5VDC, 1A + 2A Battery connection Heavy duty screw terminalsSolar charge controller load current 30A max
Protections Reverse polarity, battery over/under voltage, output short circuit, overload, over temperature
Dimensions 429(L) x 204(W) x 102(H) mmWeight 3.6kg
Specifications MI-5722Output power continuous 1000WOutput power Surge 2000WStandby current 750mAInput voltage 12VDCOutput voltage 230VACOutput wave form Pure sine waveEfficiency >90%Output regulation ±3%Output frequency 50Hz2 x USB ports output 5VDC, 1A + 2A Battery connection Heavy duty screw terminalsSolar charge controller load current 30A max
Protections Reverse polarity, battery over/under voltage, output short circuit, overload, over temperature
Dimensions 379(L) x 204(W) x 102(H) mmWeight 3.2kg
Specifications: MI-5720Output power continuous 600WOutput power Surge 1200WStandby current 750mAInput voltage 12VDCOutput voltage 230VACOutput wave form Pure sine waveEfficiency >90%Output regulation ±3%Output frequency 50Hz2 x USB ports output 5VDC, 1A + 2A Battery connection Heavy duty screw terminalsSolar charge controller load current 20A max
Protections Reverse polarity, battery over/under voltage, output short circuit, overload, over temperature
Dimensions 297(L) x 204(W) x 102(H) mmWeight 2.4kg
Rear shot
Supplied with remote
Rear shot
Supplied with remote
Rear shot
Supplied with remote
For suitable solar panels we recommend2 x ZM-9087 12V 145W panels in series
DISCOUNT TRADE CARD
If you regularly purchase electrical or electronic goods to be used for businesspurposes you may qualify for a Jaycar Electronics Trade Card which entitles you to
substantial discounts on most Jaycar products. Discounts range from 5% to 30%depending on the type and quantity of product purchased. Excludes Kits & Books.
*ABN will be required - see our website or Store Manager for further details.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
22 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
These inverters include advanced control logic which provides standardprotection (overload, high temperature, over/under input voltage, andoutput short circuit) as well as a host of additional features to provideimproved performance and reliability under adverse conditions. Thecontrol logic checks inverter and load conditions at start-up beforeapplying power. It also applies a soft start feature which near eliminatesthe risk of inverter overload when large appliances with high in-rushcurrents are used. Overload detection and prevention uses a three stagealarm which acts as a timed warning so you can decrease the loadbefore the inverter completely shuts down. High temperature protectionautomatically shuts the inverter down when it reaches a predetermined
temperature, then restarts once the temperature has dropped to a lowerlevel. A power saving mode can also be activated to minimise batterydrain when the AC output falls below a set power threshold; ideal foruse on small appliances such as entertainment equipment. When thethreshold is reached the inverter is switched to standby substantiallydecreasing the standby current draw.This range includes models suitable for a variety of mobile andpermanent power installations. Each model has been rigorously tested(and we MEAN rigorously tested!) to ensure the best performance foryour application. All models feature a standard 230VAC mains outlets aswell as a USB port for powering and charging USB devices.
INVERTERS - PURE SINE WAVE RANGE FOR TRUCK (24V) & HIGH CURRENT
360 Watt 24VDC to 230VAC Pure Sine Wave - Electrically Isolated
Specifications MI-5703Output power continuous 360WOutput power surge 720WCurrent at no load 200mACurrent in standby mode 50mAPower saving mode options OFF, <20WInput voltage 24VDCOutput wave form Pure sine waveEfficiency 84-91%Output regulation ±3%Output frequency 50HzUSB output 5VDC @ 500mADimensions 230(L) x 118(W) x 57(H)mmWeight 1.05kgInput connection Heavy duty screw terminalsRemote Control None
Circuit ProtectionOutput overload Three stage alarm and shutdownThermal alarm and shutdown >63° C ±3°Thermal shutdown restart <56° C ±3°Battery low alarm 21.2VDC ± 0.3VDCBattery low shutdown 20VDC ± 0.3VDCHigh battery alarm 30VDC ± 0.3VDCInput protection Internal 25A fuse
2000 Watt 24VDC to 230VAC Pure Sine Wave - Electrically Isolated
Circuit ProtectionOutput overload Three stage alarm and shutdownThermal alarm & shutdown >63° C ±3°Thermal shutdown restart <56° C ±3°Battery low alarm 21.2VDC ± 0.3VDCBattery low shutdown 20VDC ± 0.3VDCHigh battery alarm 30VDC ± 0.3VDCInput overload Internal 150A fuse
Specifications MI-5712Output power continuous 2000WOutput power surge 4000WCurrent - no load/standby 500mA/ 150mAPower saving mode OFF, <30W, <50W, <100WInput voltage 24VDCOutput wave form Sine waveEfficiency 84-91%Output regulation ±3%Output frequency 50HzUSB output 5VDC @ 500mADimensions 450(L) x 230(W) x 74(H)mmWeight 5.4kgInput connection Heavy duty screw terminalsRemote control Wired 5m on/off switch with status light
24V ideal for trucks
2000 Watt 12VDC to 230VAC Pure Sine Wave - Electrically Isolated Specifications MI-5710 Output power continuous 2000W Output power surge 4000W Standby current 1800mA Input voltage 12VDC Output waveform Pure Sine wave Efficiency >90% Output regulation <+/-3% Output frequency 50Hz USB output 5VDC +/-5% 500mA Dimensions 520(L) x 200(W) x 88(D)mm Weight 5.5kg Input Connection Heavy duty screw terminals
IMPORTANT NOTEDo not regard the power point of an inverter as identicalto a household power point. There are subtledifferences. Please read the notice on page 19.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
23 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Specifications AllInput voltage range 190 - 240V ACOutput voltage range 13.8V DC regulatedOutput connections 4mm Banana/Clamp TypeRecommended fuse M205 4 amp
DimensionsMP-3079: 170 x 160 x 85mmMP-3078: 170 x 190 x 85mmMP-3089: 190 x 260 x 105mm
Fixed 13.8V Switchmode
High current general workshop power supplies forequipment component testing, etc. Internal cooling fansassist cooling at higher temperatures.
• Banana socket style binding posts• LED power on indication• Rear mounted M205 fuse• Ideal for 12V amateur transceivers, linear amps and
high powered car stereo bench testing• 12, 20 and 40A models
Compact size, high current, variable output and fancooling make these the ideal power supply for yourbench. They are protected against thermal overloadand short circuit and will display a warning LED in theevent of a fault condition. Current and voltage aredisplayed on separate backlit analogue meters.
These good looking power supplies are available inthree current capacities of 5, 10 and 20 amp. They useproven technology and are designed to give long servicelife in workshop situations.
The range features short circuit protection on the outputand a fused input.
Specifications MP-3096 MP-3097 MP-3098Output voltage 13.8VDC 13.8VDC 13.8VDCRated output 5 Amps 10 Amps 20 AmpsSurge current 7 Amps 12 Amps 22 AmpsVoltage regulation <5% <5% <5%Ripple voltage 100mV 120mV 150mV
“LAB” POWER SUPPLIES
The term “Lab” power supply has become a generic term for any mains-powered unit that ischaracterised by indoor use only (i.e. no high IP rating). They provide a stable voltage andcurrent under various load conditions, and (sometimes) metering and controls on the frontpanel. They generally offer very good value for money.
Use our selection guide to help choose...
Voltage DC Current Display Output Page
MP-3079 13.8V 12A - Single 23
MP-3078 13.8V 20A - Single 23
MP-3089 13.8V 40A - Single 23
MP-3096 13.8V 5A - Single 23
MP-3097 13.8V 10A - Single 23
MP-3098 13.8V 20A - Single 23
MP-3800 0-24V 17A Analogue Meter (Backlit) Single 23
MP-3802 0-16V 30A Analogue Meter (Backlit) Single 23
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
24 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Incredibly light for outputcapacity, weighing only 3.5kg
3V to 15VDC 40 AmpRegulated Switchmode
This high powered switch mode power supply willdeliver up to 40 amps. It has a variable output voltagefrom 3 to 15VDC, or it can be fixed at 13.8VDC. The unitis suited to a variety of uses, especially DC poweredequipment operating in a test or design environmentand is ideal for car stereo work.
The unit has overload, over temperature and overvoltage protection. Output voltage and current aredisplayed on large, easily read seven segment LEDdisplays and incorporates an internal cooling fan.
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 40A MP-3090 $ 379.00 $ 339.00 $ 299.00
Specifications MP-3090Variable output 3V DC to 15VDCFixed voltage mode 13.8V DC Max. output current 40 Amps (continuous)Ripple & noise 10mVRMSLoad regulation 230mV @ 0 - 100% loadDimensions 220(W) x 110(H) x 300(L)mm
LABORATORY POWER SUPPLIES (CONTINUED)
1V to 15VDC 0 to 40 Amp Regulated Switchmode
A high powered switchmode power supply that deliversup to 40 amps. It has a variable output voltage from 1to 15VDC and variable current from 0 to 40A with a dualaction (coarse/fine) microprocessor controlled rotaryencoder tuning for smooth, precise and fast settings.Banana sockets on the front provide up to 5A outputand heavy duty binding posts on the rear for largercurrent applications. A control mode switch on the rearallows the user to select between Normal, Preset (5V,13.8 or 15VDC), Set (User-defined) modes for quickaccess to frequently used VI settings, or Remote Control.The remote control feature offers a wide range oroperation possibilities for sophisticated applications toadjust the voltage, current and on/off control (Additionalcomponents are necessary, which are explained in theuser manual). An intelligent fan control program checksthe fan at power on and adapts the right speed toensure a quiet and efficient operation, and the isolatedground construction allows parallel or series connectionof additional power supplies.
• High RFI immunity and excellent EMI• Overload, short circuit, over temperature
and tracking over voltage protected• Incredibly light, weighing only 2.6kgs.
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 40A MP-3094 $ 529.00 $ 469.00 $ 419.00
Specifications MP-3094Variable output voltage 1VDC to 15VDCVariable output current 0A to 40AMax. output current 40 Amps (continuous)Ripple & noise 5mV RMSLoad regulation 50mV @ 10 - 100% loadDimensions 200(W) x 90(H) x 215(L)mm
0 to 32VDC Dual Output, Dual TrackingThis automatic constant-voltage/constant-current transfer type power supply is effectively two0-32VDC 3 Amp power supplies in one case. The two outputs can be operated independently,connected in parallel, or series for multiple output currents and voltages. Coarse and finevoltage controls are provided on both outputs, along with current limit control. Both outputshave independent digital voltage and current meters.
• Displays are backlit and extremely easy to read.
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 3A MP-3087 $ 399.00 $ 359.00 $ 319.00
Specifications MP-3087Output voltage 2 x 0 - 32VDCOutput current 0 - 3 Amps (x 2)Ripple and noise <1mVRMSLoad regulation 10mV max.Dimensions 185(H) x 260(W) x 400(D)mmWeight 10kg approx
0 to 30VDC 0 to 5ARegulated Power supply
A must have for laboratory or home workbenches. Thisrobust DC power supply features digital control and alarge easy to read LED display. Over-current and shortcircuit protection are built-in. Voltage is adjustablefrom 0-30V and current can be adjusted from 0-5A, allthrough the large front dials. Includes a tough carryhandle making it ideal for technicians to haul aroundthe lab. Perfect for educational, industrial, orprofessional users.
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 5A MP-3840 $ 179.00 $ 160.95 $ 142.95
Specifications MP-3840Output voltage 0-30VOutput current 0-5A Ripple and noise <1.0mVRMSRipple current 3mA(ms)Dimensions 110(W) x 156(H) x 260(L)mm
Workbench sent to us by: Andrew Jaycar Store: Sunshine
A lifetime of learning about electronics, but not aboutkeeping things tidy.
For more details, visit:www.jaycar.com.au/workbench
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
25 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
CAR POWER SUPPLIES
12VDC 1.2A Car Power Adaptor Use your car's cigarette lighter socket to power or charge a variety of portableelectronic devices such as mobile phones, personal audio players, handheld videogame consoles and PDAs. Choose from 7 different DCvoltages and 6 different adaptor tips.
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 1.2A MP-3678 $ 19.95 $ 17.95 $ 15.70
Specifications MP-3678Input voltage 12VDCOutput voltage 1.5, 3, 4.5, 6, 7.5, 9 or 12VDCOutput current 1.2ACable length 1.8mDimension 99(L) x 55(W) x 45(D)mm
6A Regulated 12VDC Car/Truck Power AdaptorSupplies a regulated 12VDC output at up to 6 amps, more than enough for a portableDVD player, TV, LCD screen or any other 12 volt device. You can also use it to run a DVDplayer from your car's 12 volt supply, as many portable DVD players will only run on a regulated 12 volt supply and will self-destruct if connected to the typical 13.8 volts of a car's electrical system. Supplied with 7 DC connectors
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 6A MP-3064 $ 69.95 $ 62.95 $ 55.95
5A Regulated 12VDC Car Power AdaptorThis adaptor will power MP3 players, games, CD players,appliances or anything else that requires 5 - 12VDC at up to 5A. It's also fuse protected & includes four plugadaptors to suit most popular devices.
• Four plug adaptors • Selectable voltage: 5, 6, 9 & 12VDC• Fuse protected• Lead length: 1400mm
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 5A MP-3478 $ 39.95 $ 35.90 $ 31.90
POWER SUPPLIES - SWITCHMODE
Switchmode - Mains to Cigarette Lighter Socket For powering 12V equipment such as car coolers and camping fridges from a mains ACpower source. Supplied with a 1.5m output lead withcigarette socket output, making connection simpleand easy. Input voltage: 240VAC
12VDC 7.5A Cat. MP-3575Dimensions: 157(L) x 90(W) x 57(H)mm12VDC 12.5A Cat. MP-3573Dimensions: 200(L) x 100(W) x 65(H)mm
12VDC 8A Dimmer/Motor Speed Controller DC speed controllers are ideal for slowing downpumps and motors or dimming lights, but some useresistance circuits or rheostats wich are veryinefficient. The pulse width modulation (PWM) usedin this controller allows you to vary the output from0 to 100% while maintaining a very high efficiency.When used on motors this ensures full torque isavailable at very low speed and the motor won'tshudder at start-up. Operates on any 12VDC system andcapable of controlling devices rated at up to 8 amps.
• Internal circuitry is fully potted & the control potentiometer is splash proof makingthis suitable for marine environments and other harsh conditions.
• Dimensions: 97(L) x 46(W) x 47(H)mm
6 Plug DC to USB Lead Kit This handy DC to USB lead packallows you to power up devicesusing 5V from a USB port. Includes6 different size tips which include1.35,1.5,1.7,2.1,2.5mm DC and3.5mm Audio jack.
3A Car Power Adaptor with USB Outlet Select a DC voltage and adaptor tip combination to power or charge a widerange of consumer electronics goods such as personal audio players, digitalcameras, handheld gaming consoles, mobile phones, PDAs, PSP, etc. Manymodern devices will also charge via the USB outlet.
Ò Current Cat. Qty 1 + Qty 3 + Qty 6 + 3A MP-3671 $ 29.95 $ 26.90 $ 23.70
Specifications MP-3671Input voltage 12VDCOutput voltage 3, 4.5, 5, 6, 7.5, 9.5, 12VDCOutput current 3AUSB output 5VDC, 1APower Indicator LEDDimensions 80(L) x 76.2(W) x 33(D)mm
See our range of In-Car & Cigarette LighterChargers in the Auto & Outdoors section
12V to 5VDC Power Converter Use this wiring kit to get rid of those unsightlyand annoying power cables floating aroundyour car dash that power your GPS, Dash camor mobile device. Simply hardwire it to the12V power fuse panel in your vehicle and plugthe micro USB plug (micro USB adaptor alsoincluded) into the device you need to power. Ifyour vehicle uses blade fuses then wiring canbe made easier using our SF-5115or SF-5125 blade fuse sockets,which patch into the fuse panel.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
26 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
These units represent outstanding value for money andcarry the same warranties and factory backup as thewell-known brand-name products sold by us & others inthe trade. You can confidently design these productsinto your production, as we will be definitely stockingthese products for years to come. Indeed we will beexpanding the range over time.
Summary of features:• High efficiency and reliability • Broad input voltage tolerances• IEC Standards Compliant • Short circuit, overload/overvoltage protected• Soft-start / Low ripple DC• Multi-country Electrical Authority approvals
25 Watt - 12V & 24V• 12 and 24 volt models available• DIN rail bracket to suit
use MP-3150 • 110/240V switch• Weight: 370g
Ò Cat. Qty 1 + Qty 3 + Qty 6 +12 Volt MP-3160 $ 44.95 $ 40.45 $ 35.90 24 Volt MP-3162 $ 44.95 $ 40.45 $ 35.90
60 Watt - 12V & 24V• 12 and 24 volt models
available• DIN rail bracket to suit
use MP-3152 • Weight: 500g
Ò Cat. Qty 1 + Qty 3 + Qty 6 +12 Volt MP-3170 $ 59.95 $ 53.95 $ 47.90 24 Volt MP-3172 $ 59.95 $ 53.95 $ 47.90
40 Watt - 12V & 24V• 12 and 24 volt models available• DIN rail bracket to suit
use MP-3150 • 110/240V switch• Weight: 450g
Ò Cat. Qty 1 + Qty 3 + Qty 6 +12 Volt MP-3165 $ 54.95 $ 49.45 $ 43.90 24 Volt MP-3167 $ 54.95 $ 49.45 $ 43.90
60 Watt 5V/4A 12V/3A• Provides 5 and 12 volts at the same time.
Note: Total output must not exceed 60W• Weight: 500g• DIN rail bracket to suit use
Specifications MP-3250Output voltage 12VDCTolerance 10% +/-Ripple & noise 150mVOutput current 18AEfficiency 82%Input frequency 47-63HzCold start inrush current 36AWeight 1.1kgDimensions (LxWxH)mm 205x93x65
POWERTECH SWITCHMODE POWER SUPPLIES
DIN Rail BracketsDIN Rail brackets to suit switchmode DIN and enclosedframe power supplies.MP-3150 suits 25 & 40 wattmodels MP-3152 suits 60, 100, 120, 150 watt modelsMP-3154 Clip is required for the brackets above, which isthen attached onto the DIN rail. Note: M3 and M4 screws are required.
Ò Type Cat. Qty 1 + Qty 3 + Qty 6 + 1 DIN MP-3150 $ 5.95 $ 5.25 $ 4.75 2 DIN MP-3152 $ 6.95 $ 6.25 $ 5.50 Clip MP-3154 $ 5.95 $ 5.25 $ 4.75
Input frequency 47-63Hz 47-63HzOutput voltage 12VDC 24VDCLine regulation 1% +/- 1% +/-Ripple & noise 80mV 80mVOutput current 10A 5AEfficiency 80% 84%Cold start inrush current 40A @ 230V 40A @ 230V
Dimensions 65x125x100mm 65x125x100mmSpecifications MP-3354Input voltage 12 - 30VDCOutput voltage 12VDCMax, output current 5AContinuous output current 4AEfficiency 85%Dimensions 100(L) x 76(W) x 38(H)mm
24VDC to 12VDC 5A Converter with USB For those with a 24V vehicle such as a truck or bus, finding accessories like chargers andpower supplies that run off 24V can be near impossible. This handy little device solvesthat problem by converting 24VDC to 12VDC so that you can use normal car accessoriesdesigned for 12V vehicles. Connection couldn't be easier, with a cigarette lighter plugfor 24V input and a cigarette lighter socket for the 12V output. Maximum rated current is 5A, which is enough for most modest car chargers and power supplies As a bonus the unit also has a USB output with 1A current to charge your mobile phone or other USB device.
24VAC/DC to 12VDC 1A ConverterTrying to get power for CCTV and security cameras over a long run without losses ischallenging to say the least. Solve the problem quickly and easily by sending 24VACdown the long run, then converting it to 12VDC when you get it where you need it.
• Connection is by screw terminals.
Specifications MP-3350Input 20 - 28VAC, 16 - 30VDCOutput 12VDC regulatedOutput current 1A maxDimensions 90(L) x 25(W) x 25(H)mm
24VDC to 12VDC 3A ConverterMany trucks and boats use 24V systems. These converterswill allow you to run a reasonably sized 12V car-stereo orother devices from a 24V supply. Heatsink (notincluded) should be used for superior performance.
• Short-circuit protection• Thermal cutoutSpecifications AA-0266Input voltage 24 to 26 VDCOutput voltage 12VDCMaximum load 3ADimensions 135 x 50 x 24 mmHeatsink 50 x 100 x 30 mm (rec. size), use Cat. HH-8572 or similar
DC to DC Converter Modules Handy DC voltage converter modules that can step-up or step-down voltages so youcan power your devices where a different power source is present. This could includepowering 12VDC devices from a 6VDC motorbike battery or to run 12VDC devices froma 24VDC battery found in trucks. These units feature protection against short-circuits,overload and over-heating. They will auto-switch off in the event of overheating.Compact size and all models feature mounting holes. See our website for datasheets.
Three models to chose from:
DC TO DC STEP DOWN VOLTAGE CONVERTER MODULE
DC TO DC STEP UP VOLTAGE CONVERTER MODULE
24VDC TO 12VDC STEP DOWN VOLTAGE CONVERTER MODULE (NOT USER SELECTABLE)
Specifications AA-0236Input voltage 6-28VDCOutput voltage 3-15VDCMax output current 1.5ADimensions 60(L) x 45(W) x 20(D)mm
Specifications AA-0237Input voltage 6-14VDCOutput voltage 11-26VDCMax output current 2ADimensions 70(L) x 60(W) x 23(D)mm
Specifications AA-0238Input voltage 24VDCOutput voltage 12VDCMax output current 1.1ADimensions 70(L) x 60(W) x 23(D)mm
Specifications MP-3190 MP-3192Input voltage 85-265VAC, 120-370VDC 85-265VAC, 120-370VDCInput frequency 47-63Hz 47-63HzOutput voltage 12VDC 24VDCLine regulation 1% +/- 1% +/-Ripple & noise 200mV 480mVOutput current 3.5A 2AEfficiency 77% 80%Cold start inrush current 60A @ 230V 60A @ 230VDimensions 93x78x68mm 93x78x69mm
45 Watt Industrial DIN Rail Switchmode Power SuppliesThese compact and light weight industrial DIN railswitchmode power supplies features full temperature,voltage and current overload protection. They have abuilt-in EMI filter, a power on LED and operate from 85 ~264VAC to provide either 12 Volts DC @ 3.5A or 24 VoltsDC @2.0Amps. Input and output connections are via a7.5mm pitch terminal block.
Specifications MP-3061 MP-3063Current 10 Amp 20 AmpInput voltage 20 - 30VDC 20 - 30VDCOutput voltage 13.8VDC 13.8VDCMax, output current 10A 20AContinuous output current 7A 15AEfficiency 85% 85%Dimensions L x W x Hmm 160 x 48 x 48 210 x 90 x 50
24VDC to 12VDC ConvertersDC to DC converters are useful for running12V devices from a 24V supply in a truck orbus. These have switchmode technology forlight weight and compact design.
24VDC to 12VDC 10A ConverterDC to DC converters are useful for running 12V devices from a 24V supply in a truck orbus. These have switchmode technology forlight weight and compact design and are rated for 10A. Input and output is via cigarettelighter plug and socket.
Specifications MP-3352Input voltage 20 - 30VDCOutput voltage 13.8VDCMax, output current 10AContinuous output current 7AEfficiency 85%Dimensions 160(L) x 48(W) x 48(H)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
28 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
PLUGS SUPPLIED WITH SWITCHMODE AC ADAPTORS
The 7 plugs supplied with switchmodes are shown here, and are not interchangeablewith those on our transformer style range shown on later pages.
15 Watt - Slim High PowerRegulated output voltage, small sizeand higher power output make theseAC adaptors suitable for thousands ofdifferent applications.
• Input: 100-240VAC 50/60Hz• Fit side-by-side on a powerboard• Supplied with 7 plugs• Safety Approval no. NSW25014 • Meet MEPS requirements
5 Watt - Unregulated Ultra-SlimThese super-slimline switchmode AC adaptors give an unregulatedDC output, meaning that when loaded below their rated power,they will provide a slightly higher output voltage.
• Input: 100-240VAC, 50/60Hz• Extra small, will fit side-by-side on a powerboard• Unregulated output voltage• Direct replacement for old transformer type AC adaptors• Supplied with 7 DC plugs• Safety approval no. SAA121777EA• Meets MEPS requirements
Ò Voltage Current Approval Cat. Qty 1 + Qty 5 + Qty 10 + VDC Amps Number 9 0.55 SAA121777EA MP-3280 $ 14.95 $ 13.35 $ 11.70 12 0.4 SAA121777EA MP-3282 $ 15.95 $ 14.35 $ 12.75
Switchmode AC Adaptors - all of which meet the requirements ofthe MEPS guidelines and they all feature high levels of efficiency aswell as a low standby power consumption, on top of the regularfeatures you have come to expect from our range. The range iscompact and has increased the maximum power output of eachmodel - all at the same low price you have always paid.
Ideal for use withpower boards
They are extremely light and compact; enough to snugly and neatlyfit side by side on a powerboard - no more wasted AC outlets!
They incorporate high-efficiency circuitry, built in EMI filter, shortcircuit protection, over current protection and thermal shutdown capability.
Switchmode Plugpacks with USB OutletsThese switchmode plugpack adaptors are slim in size, lightweight, and featuremanually selectable variable voltage outputs. All are MEPS compliant and comesupplied with 7 plugs and a USB output socket. (MP-3318 does not include USB socket)
Plugs To Suit AC AdaptorsSuits all our transformer type 240VAC adaptors
• 0.7mm ID x 2.35mm OD x 10mm long - Yellow dot Cat PA-3691.• 1.75mm ID x 4.75mm OD x 10mm long - Green dot Cat PA-3692..
Ò Cat. Qty 1 + PA-3691 $ 1.50 PA-3692 $ 1.50
In-line Low Voltage SwitchSimply connect your plug pack adaptor into this in-line switchto provide quick and easy on/off control. Much easier thanunplugging the connector or reaching for the power pointwhen you want to switch your device on or off.
• 2.1mm DC plug & socket - rated at 24VDC at 2 amps.
7 Plug DC Wiring Kit - 1.8mConfigure your own plugpacks or wire to projectsto give standard DC output plugs. Includes thesame socket and 7 DC plugs as supplied with ourrange of switchmode AC plugpack adaptors.
60W - 12V, 19VDC & 45W 24VDCVersatile switchmode power supplies in a rangeof different configurations. All have high outputcurrents and are low-profile for easymounting.
• Each requires a separate IEC 240VAC lead - Cat PS-4106
• Output cable terminated to fixed 2.5mm DC plug except for MP-3243 which includes 5 output plugs
Specifications MP-3249 Voltage 90 - 264VAC Output voltage 48V @ 1.35A Power output 65W Max. Over voltage protection Shutdown latch mode Over current protection 2 step controlled current source Short circuit protection Built-in Efficiency 85% min. at full load Ripple/noise (mVpp) 2%
120W 12VDC 10A Desktop Style Switchmode Supply High current switchmode desktop power supply. Suitable for various powerrequirements, including large surveillance systems to replace a number of smaller plugpacks. DC splitter cables available separately.
• Includes IEC power lead• Output cable terminated to fixed 2.1mm DC plug
Specifications MP-3241 Input Voltage 220-240VAC Output Voltage 12VDC Output Current 10A Output Connector 2.1mm DC plug Output Cable Length 1.2m Dimensions 174(L) x 72(W) x 44(H)mm
For full range of replacementLaptop Power supplies see our computer section
DESKTOP STYLE AC ADAPTORS
These products meet the requirements of Energy Star, theEuropean Commission Code of Conduct, and of course California'slegislation, suppliers of electronic equipment requiring an externalpower supply can ship their products worldwide without needingto understand the complex new systems.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
30 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Quality fully-enclosed stepdown transformer with fold up metal carry handles, approved 3 wire power cord & US style 2 pin 110 - 115V socket.
• Electrically isolated between primary and secondary • Protective earth carried through to output • Useable with precision electric & electronic appliances. • Compact, excellent, safe & robust construction - steel case.• DO NOT compare these to cheap, non isolated units. Your life is too precious!
Includes a resettable circuit breaker instead of fuse. Now you are not tempted toreplace the fuse with a piece of coathanger wire.
1000 Watt 240V - 115V Isolated
All other details are similar to our other units.
Due to heavy weight (11kgs) please check for freight costs.Cat. MF-1086
250 Watt 240V - 115V Isolated
Cat. MF-1082
50 Watt - 240VAC to 115VACIncludes overheat protection. If the unit getstoo hot, the thermal fuse will open, then closeafter unit cools down, restoring operation.Two pin US socket on unit for 110V applianceand cord plug for 240V power.
• 50 Watts. • This is not dielectrically isolated.
Specifications MF-1080 Rating 120VA (watts) 1.0 amp Dimensions 125(W) x 74(D) x 90(H)mm Weight 2.4kgs
Specifications MF-1082 Rating 250VA (watts) 2.2 amps Dimensions 133(W) x 81(D) x 98(H)mm Weight 3.2kgs
Specifications MF-1084 Rating 500VA (watts) 4.2 amps Dimensions 158(W) x 100(D) x 120(H)mm Weight 6kgs
Specifications MF-1086 Rating 1000VA 8.6 amp Dimensions 195(L) x 120(W) x 140(H)mm Weight 11kg
240 - 115V STEPDOWN TRANSFORMERSTECH TALK!
STEPDOWN TRANSFORMERSA WORD ON ISOLATION. THIS MEANS THAT:
The primary (240V) & secondary (115V) are totally electrically isolated (Dieletric isolation).This is the safest way of making a mains voltage conversion. We recommend this type of transformer whenever the application is medical or medicallyrelated or where the secondary equipment is to be operated in or near water or highmoisture environments. Note the 240V earth is carried through to the 115V socket earth.As a further safety measure we now supply the ISOLATED units with resettable circuitbreakers.
Designed to power 12V and 24V garden lights from mains power. All output voltages are AC, not DC.
240V to 12VAC 105 Watt - IndoorIt will power 2 x 50W halogen globes or 5 x 20 watt. Idealfor 5 x 20W pathway lights, for example. Transformer mustbe used inside. • 135(L) x 83(W) x 70(H)mm • Output is via screw terminals • 4 holes for easy screw mountingCat. MP-3043
240V to 24VAC 150 Watt - IndoorAll globes must be 24V rated• Output 6.25 ampsCat. MP-3045
GARDEN LIGHTING TRANSFORMERS
0-260VAC Variable Laboratory Autotransformer (Variac) - 500VAThe variable autotransformer (Variac is the trade name of a popular brand) is one of the most useful and efficient devices ever invented for the control of AC voltage and of voltage-dependent parameters such as current, power, temperature, light intensity, motor speed etc. It enables the AC input to a mains powered appliance to be easily varied from 0 to full line voltage (or greater). Encased in heavy-duty steelhousing it also features on/off switch, output-voltagemeter, mains-supply lead and standard 3-pin poweroutput. A must for testing appliance performance under real (simulated) mains fluctuations.
• New and improved• Now supplied with slow blow fuses for extra reliablity.
Specifications MP-3080Rated power handling 500 VA (fused)Input Voltage 240 VAC @ 50HzOutput Voltage 0 ~ 260 VAC @ 50HzDimensions 165(D) x 120(W) x 160(H)mm
VARIAC
BOOKS
NOT DIELECTRICALLY ISOLATED
Teach Yourself Electricity andElectronics - Fourth Edition Comprehensive, straightforward and well-written, thisbook covers everything from atomic structure to DC &AC theory, semi-conductors, integrated circuits, digitalelectronics & communications. Each chapter has a quizat the end so you can test your knowledge. One of thebest entry-level self-teaching textbooks on electronicswe've ever seen.
• Softcover. 734 pages with illustrations• 232 x 190mm.
Ò Cat. Qty 1 + BM-7108 $ 64.95
Workbench sent to us by: Roy Jaycar Store: Midland
Work in progress always
For more details, visit:www.jaycar.com.au/workbench
3 x 18AWG (41 x 34 strands) cable rated at 250/300V @ 10 amps.
• Temperature rated at 60° C and approved to UL817, CSA C.22.3 N.42, JIS C3306,C8303 and NEMA 5-15.
• 1.8 metres longPS-4140
3 x 0.75mm2 (24 x 0.21 strands) cable ratedat 500V @ 6 amps 250V @ 10 amps.
• Temperature rated at 70°C and approved to UK spec BS 1363-84
• 2 metres longPS-4142
To suit 3 different regions/countries. We have had somany enquiries for these products that we now stockthe following range which are black in colour and areall earthed.
High Temperature IEC320 C15 SocketIntended for service in higher temperature enviroments up to 120°C at a current rating of 10 amps. Incorporates a keyway which prevents being used with standard temperature IEC320 C14 connections.
EMI Power Line Filter - 6 AmpThese Industry standard design RF/EMI filters aredesigned to reduce line - to - ground (common mode)interference. They accept a standard IEC power lineconvertor and are panel mounted. Theymeet (or exceed) internationalstandard leakage requirementsand are rated for mainsvoltages of 115 to 250V, 50,60Hz. Safety & constructionare in compliance with UL, CSA,VDE etc.
IEC320 C13 Right Angle Line Socket Right angle IEC plugs and sockets for installationswhere wall space or rack space is extremely limited.Create much neater connections to your devices. Both units feature strain relief rubber cable entries.
IEC320 C13 RIGHT ANGLE LINE SOCKET• Dimensions: 68(H) x 35(D) x
28(W)mmPP-4012
IEC320 C14 RIGHT ANGLE LINE PLUG• Dimensions: 68(H) x 35(D) x
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
32 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
MAINS HARDWARE
CIRCUIT TESTERS & BREAKERS
Double GPO with 2 x USB Charging Ports Minimise the amount of power boards, cablemess, USB power adaptors and chargersconnected around the house by fitting thesehandy GPOs instead. These devices haveeverything you expect from a standard doublepower point (GPO), but have the additional bonusof including two USB charging ports each capableof 2.1A output current. The USB ports area alsofitted with spring loaded dust covers, ensuringthat they don’t fill up with dust bunnies when not in use. Perfect for fast chargingyour Android® devices, iPad®, iPhone®, iPod®, GPS navigation devices, cameras, orother USB charging products, whilst keeping the 240VAC power point free for othermains appliances. A must have for the home office, kitchen, and bedroom.
• 2 x regular 240VAC 10A power points• 2 x 2.1A USB charge ports (compatible with Apple® devices & Tablet friendly)• No special wiring, direct replacements for standard Australian double power point• Electrical safety authority approved • Zero standby power ensures that you are energy efficient
Ò Cat. Qty 1 + Qty 10 + Qty 50 + 2 x GPO, 2 x USB PS-4067 $ 34.95 $ 31.45 $ 27.90
Non-contact AC Voltage Proximity Detector About the size of a marking pen, this non-contact tester detects AC voltages from 200 - 1000V. Featuring red and green indicators, the unit will glow green when safe,and when voltage is detected it will flash red and beep at an increasing rate as youget closer to the voltage source. It can be used for detecting live mains in outlets,power boards or insulated wiring. It also has an LED torch and a handy pocket clip. A must for every toolbox.
• Green and Red LED indicators
• Switchable audible and silent mode
• Auto Power Off • Flashlight function • CAT III rated• Includes 2 x AAA batteries• Dimensions 176(L) x 26(D)mm
Heavy Duty 15A Extension Leads Proper heavy duty mains extensions leads with 15A plugs and sockets, and a thick orange flexible cord. The 15A socket end also features an internal LED to indicate that power is present.
Double GPO with 2- Pole Switchesfor Caravans & Motorhomes By law, caravans, motorhomes and otherrecreational vehicles require a GPO with doublepole switch that disconnects both the Active andNeutral to reduce the chance of electric shock.
Weatherproof (IP55) Caravan Power Adaptor with RCDFinally, a product that legally allows you to connect your caravan/RV into a normaldomestic power outlet WITHOUT leaving a hole in yourhip pocket - no need for unsafe and illegally modifiedextension leads!! Weatherproof rated to IP55 it is safeto leave outside, and with a residual current device(RCD) safety switch, this product gives you theability to safely and legally connect your caravan15A power lead to a normal 10A power outlet.Also includes a 10A circuit breaker in case youaccidentally overload the device. A must havefor any caravan or RV. Fully certified for electricalsafety (AS/NZS 3190) and compliant to AustraliaStandards for caravan wiring (AS/NZS 3001).
Inline RCD Circuit Breaker A vital safety device for anyone that works with electric power tools. Itcan also be a lifesaver when used with electric grass cutters, electricpumps, rice cookers, water heaters, induction cookers and hair dryers.As this unit is pre-wired with an AS/NZS ratedmains plug and socket, no license is requiredto install it!
240V GPO Wall Socket with 4 x USB 3.15A Output This hardwired USB adaptor will fit into astandard GPO wall plate base and give 4 USBpower sockets with a total of 3.1 amps. Use itto power or charge pretty much anything thattakes power from a USB socket. Instructions areincluded, however, all fixed wiring productsmust be installed by a licensed electrician!
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 4 x USB PS-4071 $ 34.95 $ 31.45 $ 27.90
Power Point and Earth Leakage Tester A professional socket tester withmodern, ergonomic and durabledesign, to test the safety ofinstalled mains socket. Also checks30mA RCDs, a unique soft-touchbutton tests that an RCD in thecircuit trips within 300ms when anominal 30mA earth fault current isapplied; a further button, the earthvolts touchpad, detects raised earthvoltages above 50VAC, thusindicating potentially dangerous installations. Three vivid bicolour LEDs anda buzzer provide a quick-to-check combination of signals which indicatecorrect wiring, missing earth, live/neutral reverse, earth/live reverse, missingneutral, live faults, and those errors detected by the two pushbutton tests.
Portable RCD with 15A to 10A Mains Plug Conversion Convert your 15A power lead to fit a 10A power outlet whilst adding the additional safety of RCD earth leakageprotection. Ideal if you only have a device with a 15Amains plug, and you are located somewhere that doesnot have a 15A power outlet available. Features a 10Acircuit breaker/RCD in case you accidentally overload thedevice. Not suitable for outdoor use, unless combinedwith our HB-6178 weatherproof case.
Specifications MS-4044Voltage 240VAC, 50HzMax load 2400W 10ARated residual current 30mARCD type AC & DC pulse sensitivityDimensions 180(H) x 135(D) x 124(W)mmElectrical Safety Approval Certificate No. SAA122512EA
Specifications QP-2002Rated Voltage 240VACRated Current 10ATrip Current 30mAProtection Class IP65
SAA approved
SAA approved
SAA approved
STOP PRESS!!See page 37 for a Wall Plate Adaptor that converts asingle GPO to a double GPO with 2 x USB outlets!
See our larger size weatherproof & outdoor powerboards on page 36
Mains Power Switches & GPOsTradies pay attention!! Finally, there is a discount alternative to the big brand names!Despite being made in China, this range of general purpose outlets (GPOs) & light switchesare all made with the highest quality materials and feature an attractive finish you wouldbe happy to show inside your home. The switches are the same hardwearing long servicelife type you'll find in the big brand names, and best of all - the price is lower. The savingsreally start to add up when wiring up the garage or a whole house. They are all fullyapproved to Australia/New Zealand safety standards, so you don't have to take only ourword to ensure quality.
General Purpose Outlets - GPOsThese switches are the same hard wearing long service life type you'll find in the big brand names and best of all -the price is lower. The savings really start to add up when wiring up the garage or a whole house. They are all fullyapproved to Australia/New Zealand safety standards, so you don't have to take only our word to ensure quality.
• Safety Approval No.: ESV120046• Packaged in a handy trade-style polybag
Three different types available:PS-4040 Single 240V GPOPS-4060 Double 240V GPOPS-4046 Double 240V GPO with Extra Switch
These are usually used to give an electrically commonpoint for earth wiring but are also useful for low voltagetie points, especially on boats or RV's, Caravans etc., 6holes accept up to a 4.5mm wire bundle and the outer2 a 6.0 bundle. The Busbar has insulated standoffs ateach end which can be removed so that the assemblycan be screwed directly to a chassis. The standoffs havea conservative insulation rating of 1000V.
• All screws M4.0 Brass bar 9.0 x 6.0• Length overall including standoffs: 100mm,
150A Insulated Bus Bar This quality bus bar features a raised insulating base that isolates the bus bar from earthed or other live chassis. It features 2 x 5mm bolted terminals for connecting main power feeds, and 10 screwterminals for connecting lower current feeds of up to10A each. Total current capacity is 150A, and is suitablefor 12-32V wiring. 2 countersunk screw holes for 5mmmetric fasteners.
• Not suitable for 240V active circuit• Dimensions: 145(L) x 30(W) x 40(H)mm Ò Cat. Qty 1 + Qty 4 + Qty 10 + SZ-2012 $ 16.95 $ 15.25 $ 13.55
DO NOT USE FOR 240V
240VAC Single Architrave Light Switch Single architrave light switchsuited for door frames.
Earthed Mains Adaptor for Use inAustralia & New Zealand This universal adaptor converts 3 pinplugs from USA or UK to match 3 pinoutlets in Australian and NewZealand. Also compatible with theunearthed 2 pin Europlug commonthroughout Europe.
Australia 2 Pin to JapanSuitable for taking your 2 pinAustralia/New Zealand appliancesoverseas to plug into 2 pin un-earthed Japan/USA power sockets.
SAA approved
Australia 3 Pin to USASuitable for taking your Australia/New Zealand appliances overseas toplug into 3 pin earthed USA power sockets.
SAA approved
Australia to UK/Hong KongSuitable for taking your Australia/New Zealand appliances overseasto plug into UK/Hong Kong power sockets.
SAA approved
Australia to Europe Suitable for taking your Australia/New Zealand appliances overseasto plug into Europlug power sockets.
SAA approved
Mains Travel Adaptors With USB Charging PortSuitable for taking your Australia/New Zealandappliances on your overseas travels. Each provides a USBcharging port with 2.1A current to charge your Tablet orSmartphone, eliminating the need to carry multiplepower adaptors.
4 versions available to suit most countries.• NOTE: Does not convert voltage.
Universal Travel Adaptor With USBCharger, Overseas to Australia Suitable for plugging overseasappliances into Australia/NewZealand power sockets. Alsoprovides a USB charging portwith 2.1A current to charge yourTablet or Smartphone, eliminatingthe need to carry multiple poweradaptors.
WARNING!Note: These adaptors do not convert voltage. Item beingconnected must be suitable for 220-240VAC
TRAVEL ADAPTORS
TRAVEL ADAPTORS COMPARISON GUIDE
Use our selection guide to help choose...
WARNING!We strongly recommended that you exercise extreme caution if buying 240V mainsaccessories from so-called "$2 shops". There have been stories in the News recentlywhere people have been electrocuted from products purchased at theseestablishments. It appears that they are imported from overseas (usually China) and arenot subjected to a rigorous inspection/approval process before being offered for sale.
The 240V products offered from us are all electrically tested and approved whereappropriate.Why risk the lives of yourself and loved ones by using potentially dangerousgoods which are not that much cheaper than products from reputable suppliers?
Country Australia TO (Outbound) Inlcudes USBCharger TO (inbounds) Australian Inlcudes USB
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
35 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Outbound Mains Travel Adaptorfor South Africa and India Will let you use Australian appliancesin South Africa and India. Alsoprovides a USB charging portwith 1A current to charge yourTablet or Smartphone,eliminating the need to carrymultiple power adaptors.
Note: Does not convert voltage,suitable for 240V 50Hz mains.
Inbound Mains Travel Adaptorfor Europe and USA with USB Suitable for plugging overseasappliances from Europe, Bali, USAand Japan into Australia/NewZealand power sockets. Alsoprovides a USB charging port with1A current to charge yourTablet or Smartphone,eliminating the need to carrymultiple power adaptors.
Note: Does not convert voltage, suitable for 240V 50Hz mains.
Outbound USA Mains TravelAdaptor with 4 USB Sockets Will let you use Australianappliances in the USA andCanada. Also provides 4 USBcharging ports with total outputof 2.1A current to charge yourTablet or Smartphone.
Note: Does not convert voltage,suitable for 240V 50Hz mains.
Outbound Europe Travel MainsAdaptor with 4 USB Sockets Will let you use Australianappliances in Europe, Bali andseveral other regions. Alsoprovides 4 USB charging portswith 2.1A total output current tocharge your Tablet or Smartphone,eliminating the need to carrymultiple power adaptors.
Note: Does not convert voltage,suitable for 240V 50Hz mains.
Outbound UK and HK Mains Travel Adaptor with 4 USB Sockets Suitable for taking yourAustralia/New Zealandappliances overseas to pluginto UK/Hong Kong powersockets. Also provides 4 USBcharging ports with 3.15A totaloutput current.
Note: Does not convert voltage,suitable for 240V 50Hz mains.
USA and EuropeInbound Travel Adaptor Accepts overseas 2 and 3 pinplugs and adapts to Australiaand New Zealand. For usewith electrical appliancesfrom Europe, USA, andsome Asian and SouthAmerican countries.
India/South Africa MainsTravel Adaptor Electrical appliance adaptorsfor Australians travellingoverseas to India or SouthAfrica.Note: DOES NOT convertvoltage.
This is the main part of my man-cave work bench. Inhere I build my own custom arcade machines fromscratch, I repair computers and create lots of electronicprojects with my daughters to help them learn andgrow.
My 3yo daughter loves playing with LEDs and buttoncell batteries to make them light up. My 5yo daughterenjoys building wooden toys from the scraps of myarcade machines.
A 3D printer is something we would love to have to beable to create so much more.
For more details, visit:www.jaycar.com.au/workbench
NERD PERKS REWARDS CARD
Earn a point for every dollar spent at any Jaycar company owned store*& be rewarded with a $25 Jaycoins Card once you reach 500 points!
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
36 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
IP44 Weatherproof Outdoor Powerboard Enclosure Running 240 volt power cablesoutdoors can be quitedangerous if they are notprotected from the elements.This weather proofpowerboard box has an IP44weather resistant rating andwill considerably improve thesafety factor. (Not waterproof)
• IP44 Rating• Fits extra long powerboards
up to 420mm long• Wall mountable• Child safe with locking option• Dimensions: 450(L) x 180(W) x 125(H)mm
Mains Extension Leads - WhiteThese leads have the new “safe socket”, which has a flange around it, so kids can’t slide a knife in and hurt themselves.
• Off white colour
MAINS EXTENSION LEADS CONNECTION BOXES
Dri-Box Weatherproof Power Connections Boxes Protects mains connections from rain, dust, orgrime. Just insert a mains plug and socket intothe box, connect them, then run the cable outof the openings at each end. The box lidfeatures a rubber gasket and each openinguses a rubbery-jelly material to safely seal thecable from exposure. Ideal for protectingChristmas/other outdoor lighting cables, water features, outdoor speaker cables,outdoor heating equipment, and many other outdoor applications. Our large model iscapable of containing most 4 way powerboards. It features 5 openings, one for themains coming from the powerboard and 4 to be used as outputs from the powerboard.IP55 rated.
Ò Size Dimensions Cat. Qty 1 + Qty 4 + Qty 10 + Small 200(L) x 90(W) x 94(H)mm HB-6175 $ 24.95 $ 22.45 $ 19.95 Large 285(L) x 150(W) x 110(H)mm HB-6177 $ 34.95 $ 31.45 $ 27.95
Heavy Duty 15A Extension Leads Proper heavy duty mains extensions leads with 15A plugs and sockets, and a thick orange flexible cord. The 15A socket end also features an internal LED to indicate that power is present.
Straight IEC Female to 240V Plug• 1.8 metres long. • Earthed • SAA Approved
IEC Female to IEC Male• 1.8 metres long • SAA Approved
240V Male to 2 x IEC Female• 2.0 metres. • SAA Approved• 540mm before join,
each output 1550mm long
IEC Male to 2 x IEC FemaleGenerally used for splitting “switched” outputs - like theone on the back of many computers that is used forpowering the monitor. Now you can use this facility toturn on another device - like a printer, desklamp...anything with an IEC male.
Straight IEC Female to 240V Plug - 5mExtra long mains lead (5 metres) to allow more options with equipment placement or for eliminating an extension lead.
IEC LEADS
15A IEC C19 Female to 240V Plug • 1.8 metres long• 15A • SAA Approved
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
37 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Mains Double Adaptors• 240V Double Adaptors • Standard, right & left types
Ò Approval Number Cat. Qty 1 + Qty 4 + Qty 10 + Standard N14532 PP-4032 $ 4.95 $ 4.45 $ 3.90 Right Hand NSW22165 PP-4035 $ 4.95 $ 4.45 $ 3.90 Left Hand NSW22165 PP-4036 $ 4.95 $ 4.45 $ 3.90
Right HandStandard Left Hand
Double Adaptor with Night Light Leave a night light on for the kids without wasting apower point. When the lights go out, the light comes onso you can find your way to the little room or the kitchenfor a midnight snack and it only uses a tiny 0.2W so itwon't send the power bill through the roof. It can be leftin place and you still have use of the power outlet.
Mains Surge ProtectorMains surge protectors are a must for protecting valuableequipment against damage. Unknown to the majority ofconsumers, the voltage coming out of the power point canand will fluctuate daily, even without major occurrenceslike lightning strikes. These two mains surge protectorsalleviate the majority of problems caused by theseincreases in voltage which damage delicate and expensiveappliances connected to your power outlets.
Each model has protection across active-neutral andactive-earth and is fully approved for electrical safety.Providing adequate protection against most surges inmains voltages, they can save you many times the cost ofthese units in repairs or insurance claims.
Ò Cat. Qty 1 + Qty 4 + Qty 10 + Double Power Point MS-4015 $ 10.95 $ 9.75 $ 8.75
Specifications MS-4015Load rating 240VAC 50Hz 10AEnergy absorption 175JSurge current 6000A
Surge Protected Mains DoubleAdaptor with 2 x USB Ports Provides 2 x mains sockets and 2 x USB socketsfor recharging all manner of Smartphones andUSB powered gadgets. Features a greengrounded LED and red protected LED. Surgeprotected so you don't fry your valuablegadgets in the case of any power spikes.
PP-4037
Ò Cat. Qty 1 + Qty 4 + Qty 10 + Double + 2 x USB 1A PP-4037 $ 17.95 $ 16.15 $ 14.35 Double + 2 x USB 3.5A MS-4087 $ 29.95 $ 26.95 $ 23.70
Specifications BothVoltage 230-240VACMax current 10AMax Power 2400WMax energy 525JMax spike current 18000ANoise filter 150kHz-100MHzOutput Voltage 5VDCOutput Current 1A (PP-4037), 3.5A (MS-4087)Output Power 5WDimensions 91(W) x 72(W) x 55(D)mm
Detachable Wall Plate Double Adaptor with 2 USB Ports A detachable wall plate adaptor that can be easilyfixed to an existing power outlet without openingand rewiring which adds 2 x USB ports. The 2 xUSB outlets can charge and power your USBdevices up to 3.1A in total. Using these two USBports, you can turn any wall outlet into a mobiledevice charging station. This smart unit isembedded with surge protection, switchable lightsensor night light and emergency light. It suitswidely used wallplates such as Clipsal, HPM, etc.Perfect for the kitchen, bathroom, or garage.
• 2 x USB outlets• 2 x Mains power outlets• Emergency light in white light• Light control night light in blue light
LED Night Light with SensorNo need to trip over the cat or stub your toe when you need to get up inthe middle of the night. Keep one of these plugged in and it will give youenough light to see where you're going. Being LED, it uses very littlepower, so you can leave it on permanently. The built-in sensor turns the light off whenever the room lights are switched on.
• Ideal for kids room, hallways and closets• Rotates through 360° to light any direction• No batteries required• Durable construction• Unobtrusive size - smaller than a double adaptor• Dimensions: 50(Dia) x 50(H)mm
Mains Night Light with Torch A beautifully designed night light that plugs into a powerpoint and will automatically illuminate a dark hallway,stairway or any room when motion isdetected. It has a built-in low light sensorso that it is only activated at night orduring low light conditions. The torchsits in an induction charge base andcan be easily removed for use duringpower outages.
Specifications ST-3146Power 110-240VACBuilt-in battery 2 x 2450 3.7V 120mAh Li-ion15 x LED Night Light / 5 x LED TorchCharging time 8 hoursBurn time 15LED: >1h / 5LED: >5hSensor distance 2-3mSensor angle 60°Dimensions 170(H) x 75(D) x 54(W)mm
MS-4087
For small cupboard/wardrobe night lightssee the Auto & Outdoors section
Workbench sent to us by:Terry Jaycar Store: Tuggeranong
As I have an 'L' shaped workspacemy pic is a panorama.
My den is used for computing,assembling model RC helicopters,charging batteries and all thingselectronic. For more details, visit:www.jaycar.com.au/workbench
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
38 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Powerboards - Filter / Surge & Overload ProtectionThese powerboards offer a choice of 4 or 6 outlets, all filtered and surge protected.Guard your expensive Hi-Fi, TV, or VCR etc. against damage.
• Surge and spike protected mains outlets• 10 Amp resettable overload circuit breaker• Cable length: 1 metre• Colour: White
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 4 Way MS-4051 $ 11.95 $ 10.75 $ 9.55 6 Way MS-4055 $ 14.95 $ 13.35 $ 12.70
4 Way Powerboards - Filter / Surge & Overload ProtectionThis powerboard offers 4 outlets, all filtered and surge protected. Guard yourexpensive Hi-Fi, TV, or VCR etc. against damage.
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 4 Way White MS-4050 $ 16.95 $ 15.25 $ 13.55 4 Way Black MS-4057 $ 16.95 $ 15.25 $ 13.55
• 4 Surge and Spike protected mains outlets
• 10 amp resettable overload circuit breaker• Power on indicator in switch• Cable length: 1 metre
Specifications BothSurge Protection Metal oxide varistorsSupply Voltage 230-240VACCurrent Rating 10A maxProtection Mode Active - NeutralMax Surge Current 6000ATypical Capacitance 430pFClamping Voltage <775 @ 50AEnergy Absorption 175 joulesApprovals Number N17298
Specifications BothSurge Protection Metal Oxide VaristorsSupply Voltage 230-240VACCurrent rating 10A maxEnergy Absorption 230 Joules
4 & 6 Way PowerboardsThese powerboards will allow 4 or 6 appliances to be plugged in at once to a single power point.
• Maximum load is 2400 watts. • Includes a safety overload with reset switch. • White in colour. • Cord length 1.2 metre.• Power LED indicator
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 4 Way MS-4040 $ 9.95 $ 8.95 $ 7.95 6 Way MS-4045 $ 11.95 $ 10.75 $ 9.55
POWERBOARDS
6 Way USB Powerboard Charges up to 6 USB devices at a time and features a smart charging IC, which identifies the USB deviceconnected and delivers the most suitable current for that device. It is compatible with numerous digitaldevices such as the most popular brands of MP3/MP4 players, portable gaming devices, digital cameras,Tablets, and Smartphones, including iPad®, iPhone®, and iPod® and Samsung®.
• Mains powered• Power LED indicator
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 6 Way MS-4068 $ 39.95 $ 35.90 $ 31.90
4 or 6 way available
4 or 6 way available
Available in black or white
Specifications MS-4068Current Output 6.8A (Max)
2 x 2.4A ports, 2 x 1A ports or4 x 1.2A ports, 2 x 1A
Dimensions 190(L) x 40(W) x 32(H)mm
4 Way Mains Powerboard with 2 x USB and Surge Protection This 4 way powerboard includes 2 rapid charge USB sockets suitable forcarging most smart devices and has filters for protection of mainsproducts. Ideal for protecting your computer from spikes and surges.
• 4 surge and spike protected mains outlets• 2 rapid charge USB sockets 3.1A total• 10 amp resettable overload circuit breaker• Cable length: 1 metre
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 4 Way MS-4100 $ 39.95 $ 35.90 $ 31.90
6 Way Mains Powerboard with 2 x Telephone Surge Protection This 6 way powerboard has filters for protection of mains and telephone products: phones, modems, answering machines, cordless telephones, faxes. Ideal for protecting your computer and phone line from spikes and surges.
• 6 surge and spike protected mains outlets• Telephone / data line surge and spike protection RJ45 sockets (RJ12 reducer included)• 10 amp resettable overload circuit breaker• Cable length: 1 metre
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 6 Way MS-4102 $ 29.95 $ 26.95 $ 23.70
4 & 6 Way Powerboards - Surge/Overload ProtectedIndividually switched powerboards provide a high level of protection from overload and surge, with extra-wide spacing to take bulky mains plugpacks. Ideal for home theatre, computers, TV and video or audio systems.
• Extra-wide spacing to take mains plugpacks• Individually switched• Surge and overload protected
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 4 Way MS-4064 $ 19.95 $ 17.95 $ 15.95 6 Way MS-4066 $ 24.95 $ 22.35 $ 20.95
Specifications - Power Filter BothSurge protection Metal oxide varistorsSupply voltage 230-240VACCurrent rating 10A maxSurge Rating 375 Joule
4 or 6 way available
Specifications MS-4100Surge Protection Metal oxide varistorsSupply Voltage 240VAC 50Hz
Specifications MS-4102
Surge Protection Metal oxide varistors
Supply Voltage 240VAC 50HzCurrent Rating 10A maxProtection Mode PNMax Surge Current 6,000A
Energy Absorbtion 175 joulesResponse Time < 20 nanoseconds
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
39 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
POWERBOARDS (CONTINUED)
5 Way Remote Controlled Powerboard Powerboards often sit in hard to reach places so they're usually hard to turn off in orderto reduce wasteful power consumption from devices in standby mode. There are 4switched sockets for general electrical appliances and 1 socket designed for appliancesthat always stay on such as telephones, modems, or medical equipment. With the
remote control, devices connected to the 4 switched sockets can be switched off/onindividually or all 4 can be switched off simultaneously. LED status indicators sit aboveeach socket and the board features a manual switch in the event your remote goes walkabout. The remote is uniquely coded to avoid interference with other remotes.
Ò Cat. Qty 1 + Qty 4 + Qty 10 + 5 Way MS-6154 $ 69.95 $ 62.95 $ 55.95
6 Way Energy Saving Powerboard Energy saving made simple. This auto powerboard helps save you money by ensuring your equipmentis not left on unintentionally or in standby mode wasting energy and money. To operate, simply connectyour main device (eg. TV or PC) into the control socket, plug the pieces of equipment you wish to turnoff automatically into the 'auto' sockets and equipment you wish to leave on into the 'always on socket'(eg. DVR for scheduled recording). Once the powerboard senses that the main device has turned off orgone into stand-by the 'auto' sockets will turn off. Once the control device turns back on, so will the'auto' sockets. Features an auto power-down feature where the 'auto' sockets turn off after 60 minutes.If no IR signal is detected from the IR sensor that you place under or in front of the TV within 55minutes an LED will indicate that it will shut-down in 5 minutes time. To prevent shut down simplypress any button on your remote control (eg. volume) or press the button on top of the IR sensor.
• 1 Control socket, 4 auto on/off sockets, 1 always on socket• Automatically turns off your peripheral equipment• Power on indicator light + board activated light• LED Surge protection function indicator light• IR sensor with 5 minute power down warning light
Ò Cat. Qty 1 + 6 Way Energy Saving Powerboard with IR Sensor for AV MS-4080 $ 39.95
Specifications MS-4080Power rating 240VAC, 10AMaximum load 2400WSurge protection 700 joulesClamping Voltage 775VResponse time 1nsEMI/RF noise filtration 40dBPower & IR cord (MS-4080) lengths 1.8mDimensions 340(L) x 120(W) x 35(D)mm
Powerboard Specifications MS-6154Rated Voltage 240VAC 50HzTotal Load 10A 2400WOverload Protection 10A resettableSurge protection 30,000A 1050 JoulesStandby power consumption <0.5WCord length 900mmDimensions 387(L) x 65(W) x 30(D)mm
Remote specificationsTransmission frequency 433.92MHzIncludes 1 x CR2032 batteryDimensions 97(L) x 39(W) x 15(D)mm
10 Way Home Theatre Surge Protected Powerboard Perfect addition for your home theatre, music gear or for home office setups. Features 10surge and spike protected outputs, including 2 wide outputs for large power adaptors. Alsoincludes 2 x USB ports for charging Smartphones and Tablets. Surge protection and EMI/RFIfiltering are provided for the mains power to all your equipment and each socket isprotected three ways: through active, neutral and earth. Additional protection is provided bythe built-in circuit breaker. This powerboard also has telephone protection (1 input, twooutputs so doubles as a splitter), data protection for a network connection, satellite / cableTV video protection, and protection for the TV antenna.
• 10 surge and spike protected outputs• Separate telephone/data line and TV antenna/cable TV surge and spike protection• 10 amp resettable overload circuit breaker• Flame retardant enclosure• Two outlets spaced further apart to accept larger power adaptors• Dimensions: 360(L) x 125(W) x 32(H)mm
Leads included:• 1.8m TV coax plug to TV coax plug • 1.8m RJ45 to RJ45• 1.8m RJ45 to RJ12 • 1.8m F61 plug to F61 plug
Power Filter MS-4034Surge protection Metal oxide varistorsSupply voltage 230-240V Current rating 10A max. 2400WProtection mode A-N, N-E, E-AMax surge current 144,000ATypical capacitance 400pFClamping voltage (@50A) <775V
Energy absorption 4300JResponse time < 2 nsFiltration EMI /RFI
Telephone Line ProtectionFilter type Gas tube arrestorSurge current 1200A (1KV/µs)Impulse discharge current 10KA (8/20µs)
Capacitance <5pFClamping voltage 600VTV Surge Protection Gas tube arrestorDC Strike Voltage 230 to max. 600 voltsSurge current 4500AEnergy Dissipation 225 joulesResponse Time <10ns
2 Outlet Workstation Centre with USB 1A Socket This innovative power adaptor fits into a standard 60mm desk grommetallowing the power cord to be discreetly run through the hole withoutcluttering your desk. It features 2 surge protected mainspower sockets and 1 USB port for power. Installation takesjust seconds with no tools required.
• Max Current: 10A• Surge Protected to 175 joules• USB Socket: 5V at 1A• Power Cord Length: 900mm
4 Outlet Power Block with Securing Loops & USB The unique securing loops ensure that you donot accidentally pull the plugs out from thesockets. Simply loop the cables through thefasteners to keep them in place. Alsoincluded is a 1A USB charging socket.
• 240VAC at 10A max• USB Outlet: 5VDC at 1A• Dust cover for USB socket• Dimensions: 125(H) x 90(H) x 72(D)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
40 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
MAINS OUTLET CONTROL & PROTECTION
Wi-Fi Controlled Smart Mains Socket Have control over your electronic devices inside your home or office from anywhere!From lights to heater, from stereos to grooming devices, you can turn your pluggeddevices on or off from your Smartphone remotely. This Wi-Fi Controlled Mains PowerSocket connects to your home Wi-Fi network, and to any internet enabled Smartphone.The APP gives you control over your devices, including a timer. MS-6124contains power monitoring ability to the connected device as well asthe common features shared between the two models.
Features MS-6122• Remote control - Turn on/off your electrical
appliances from anywhere.• Countdown Timer - Never over charge your electronics again.• Anti-theft Timer - Pretend you are home and guard your house.• Schedule Timer - Perform routine operation automatically for
your home appliances.• App available for both Android® and Apple® devices
Features MS-6124• Power meter - Demonstrate power trend in different cycles.• Remote control - Turn on/off your electrical appliances from
anywhere.• Countdown Timer - Never over charge your electronics again.• Anti-theft Timer - Pretend you are home and guard your
for your home appliances.• APP available for Android® and iOS®
Ò Cat. Qty 1 + Qty 4 + Qty 10 + Wi-Fi Socket MS-6122 $ 59.95 $ 53.95 $ 47.90 Wi-Fi Socket with Power Meter MS-6124 $ 64.95 $ 58.50 $ 51.95
Specifications BothInput 230V - 10A, 50Hz Output 230V-10A maxDimensions 125(L) x 70(W) x 50(D)mm
240V Mains Wi-Fi Wireless Switch Module with APP Designed to transform your traditional one way mains power point into a modern Wi-Fiswitch so you can control connect devices via your Smartphone, from anywhere. Itfeatures a schedule timer to automatically turn devices on and off, and a countdowntimer to turn devices off after a pre-set time period. The App for this unit can be freelydownloaded from Google® Play and App. Store.
System requirements:• Wi-Fi router• iPhone®, iPad®, or iPod® (iOS® 6.0 or
Simply plug in any mains appliance rated up to 10A and use the remote to turn eachone on or off individually, or control all of them together. One of the outlets also has anLED night light that's also operated with the remote, so you can see where you're goingif you have to get up during the night for the elderly, disabled or for making sure the TVand other appliances are turned off at the mains before you go to bed.
• 433MHz• Remote battery included• 10A, 2400W rated• Remote measures: 125(W) x 45(H) x 17(D)mm
Single RCD (Safety Switch) OutletRCDs (residual current devices), also commonly calledsafety switches, are designed to cut the power in afraction of a second in the event of a fault condition,thereby preventing electrocution. The electrics in yourhouse may be too old to have RCDs installed, or youmight want to use a power tool outdoors on an outlet thatdoesn't have an RCD fitted - use this handy portable oneinstead. Buy one right now if you don't have RCDs already
Note: RCDs are not a substitute for common sense aroundmains electricity. While they will work in most situations,they may not in some cases and are not a substitute forcurrent overload devices such as fuses and circuitbreakers. Wiring, appliances, leads and power outletsmust always be maintained in a safe condition.
Specifications MS-6126Electrical rating 120V/15A/60Hz/1800WWi-Fi 2.4GHz 802.11b/g/nDimensions 53(W) x 50(L) x 16(D)mm
24 Hour Mechanical Mains TimerControl any 240V mains appliance rated up to10A. Turn the heater on before you get up inwinter, turn the lights on or off when you'reout or control a watering system. Simply pushand rotate the dial to the time you want, thenswitch it on.
• Suits any 240V 10A GPO• Size: 120(H) x 76(W) x 50(D)mm
Digital Mains Timer Switch ModulesIdeal for automating your heating & lighting or practicallyany other switching application that requires multipleunattended switching cycles. The timer has eight on/offsettings that can be programmed to function on any day,or combinations of days across the week. Each of theon/off settings can be set independently. Each On/Offsetting can be associated with a range of days from asingle day to every day, thus giving 56 possible on/offcycles per week. Two models available.
Mains Timer with LCD 2400W mains timer for automatically turningyour appliances on and off at the correct times.The digital display means more features can beadded for advanced timing as compared tomechanical versions.
• Up to 10 separate on/off programs• Minimum 1 minute interval• 12/24hr selectable• 16 combinations of day or blocks of days
available• Random function available• Ni-MH battery for >100hr program memory
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
41 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
MONITOR YOUR POWER & SAVE
Mains Power MeterThis intelligent power meter simply plugs into a normal powerpoint (GPO) and turns it into a real-time power monitoringoutlet. You can enter the local price of your electricity and themeter will tell you exactly how much the appliance is costingto run. In addition, the power meter tracks the power usedand can display the instantaneous voltage or current beingdrawn as well as the peak levels that have been drawn. Themeter has backup batteries so it will not lose the stored dataduring a blackout or moving from point to point.
• Simple to install and a valuable tool for monitoring your power consumption
Take command of your power usage and reduce your power bills with this householdpower monitor. It's common knowledge that energy costs are always rising, and thebest and cheapest way to reduce your energy costs is by reducing your energyconsumption. By using one of these fantastic power monitors, you can be informedwith live power usage information and adapt your energy usage habits to reduce yourpower bills. There is no tricky wiring involved either; a wireless transmitter is installedin your meter box with a sensor that simply clips over the main power wire (nocutting!), which then measures the current flow and sends that information wirelesslyto the indoor display. The indoor display then shows the live power consumption aswell as a whole host of other features. Each monitor works with single or 3-phase(extra sensor pack MS-6201 needed for 3-phase).
The MS-6200 power monitor is the most basic in the range, with all the power datareceived by the indoor LCD display and stored internally on that display. The indoor LCDdisplay gives you clear live power consumption, live running costs, stores your usage byday/week/month, and calculates your average daily, weekly and monthly power andrunning costs. You can program multiple tariffs as well, for those on time-of-usemetering. The kit includes weatherproof transmitter with CT sensor and indoor LCDdisplay. Transmitter and LCD display each powered by 3 x AA batteries (required).
Home Hub Online Household Power Monitor, with App This Home Hub is the ultimatesolution for the most tech savvyusers, allowing you to monitoryour power use in real timefrom anywhere with an internetconnection! All you need is yourSmartphone/Tablet/PC, aninternet connection, and youcan view your energy monitorfrom anywhere in the world. It combines all the features you would expect from ahousehold power monitor, but uses your internet enabled device to display the datarather than a separate LCD display. It still has the transmitter in the meter box like otherEfergy units, which transmits to the Engage Hub that is connected to your internetrouter, which then uploads the data to cloud server. The app/website then gives youdashboards with real time power use, historical charts, daily/weekly/monthly use andcosts, power limit warnings, and much more.
The kit includes wireless transmitter with CT sensor, Home Hub, AC power supply, andEthernet cable. Transmitter powered by 3x AA batteries (required).
The Home Hub is able of monitoring up to 5 transmitters, so you canmeasure your home energy use and also the output from your rooftop solar system, for example.
Ò Cat. Qty 1 + Qty 4 + Qty 10 + Power Monitor MS-6204 $ 129.00 $ 115.95 $ 102.95
Home Hub Solo - Hub Only If you like the idea of the online EngageHub, but also want the convenience of an"always on" LCD display in the home, youcan simply install the MS-6200 Elite PowerMonitor, and then add the MS-6205Engage Home Hub Only. The MS-6205Engage Hub will then link to thetransmitter from the MS-6200 EliteMonitor, giving you both the LCD displayand the link to your Smartphone/Tablet/PC.
Deluxe Large Screen Power Meter with 1m Extension Lead This deluxe power meter allows you to monitor theenergy consumption of an appliance with the addedconvenience of being able to read the large LCD screenvia an extension cord. It will instantly display thevoltage, wattage or cost usage of your hard to reachappliances such as fridges, heaters or dishwashers.
• Easy to read large display• Max load: 10A/2400W• Supplied with 1m extension cable• Dimensions: 160(L) x 73(W) x
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
42 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
ECLIPSE ALKALINE BATTERIES
PREMIUM ALKALINE BATTERIES
SB-2900SB-2910 SB-2912 SB-2914
Panasonic® Batteries Panasonic® is not a name that you instantly associate with highperformance batteries, but we have come to learn that in factPanasonic® has been manufacturing batteries for many many years,providing OEM manufacturing and strong research & developmentfor many of the big brands you know and recognise. But now theyhave decided to keep their latest technology for themselves, andlaunch into the market under their own brand. These new Panasonic® Evolta® batteries currently hold aninternationally recognised record for the longest lasting AA alkalinebattery - yes we know that everyone makes these sorts of claims,
but they have the test results toverify it! If you don’t believe us, test them for yourself, we are sure youwill be impressed!Having said that, the prices are quite competitive, considering theoutstanding performance of the Evolta® product. We are confidentthat with a name like Panasonic® you can be confident aboutquality! So if using brand-name batteries is important to you wewould love you to try the Panasonic® Evolta® alkaline range.
Eclipse batteries are made to the same specifications of those well known expensive brandsadvertised on TV, but at a realistic price. We are very, very proud of these products and stand behindthem unconditionally. If you try them & are disappointed with them for any reason we will give youa full refund and another set of ECLIPSE batteries to see if you can work out what went wrong!
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
43 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
N Size Extra Heavy Duty Zinc Chloride - VinnicThese batteries are superior to standard carbon-zinc cells but are muchcheaper and have a longer shelf life.
• Blister Packed
Eclipse Lantern BatteryA 6 volt heavy duty battery as used in manytorches including the very popular Dolphin.• Carbon zinc battery
Ò Type Pack Cat. Qty 1 + Qty 10 + Qty 20 + N 2 SB-2346 $ 3.45 $ 3.05 $ 2.75
6, 9, 12V Alkaline Batteries • Blister packed
Ò Type Cat. Qty 1 + Qty 10 + Qty 20 + A23 SB-2420 $ 1.95 $ 1.75 $ 1.55
Ò Type Cat. Qty 1 + Qty 10 + Qty 20 + L828 SB-2422 $ 3.20 $ 2.83 $ 2.45
Ò Type Cat. Qty 1 + Qty 10 + Qty 20 + L1325/4LR44 SB-2415 $ 3.25 $ 2.90 $ 2.60
Ò Type Cat. Qty 1 + Qty 10 + Qty 20 + L1016/11A SB-2421 $ 2.95 $ 2.60 $ 2.30
Ò Type Cat. Qty 1 + Qty 10 + Qty 20 + GP29A/L822 SB-2427 $ 3.95 $ 3.45 $ 3.15
(A) 12V CAR ALARM REMOTE CONTROL BATTERY - A23TYPE/L1028/SLR23/GP23A (HOUSE BRAND)As used in remote controls for most caralarms. Size 9.5mm dia x 27mm high. See photo “A”.
(B) 12V THIN CAR ALARM REMOTE CONTROL BATTERY - L828 TYPEAs used in new generation small sized car alarm remote controls. Size 8mm dia x 28mm high. See photo “B”.
(C) 6V ALKALINE BATTERY - L1325/4LR44 TYPEThese are the same size as A544 batteries. Used mainly in cameras. Size 13mm dia x 25mm. See photo “C”.
(D) 6V ALKALINE BATTERYNo L1016/11A. Size: 9.5mm dia x 15mm high. See photo “D”.
(E) 9V ALKALINE BATTERY - GP29A/L822 TYPEGeneral purpose remote control battery. Size: 7.7(dia) x 21.4(L)mm Capacity 18mAh. See photo “E”.
Ò Type Cat. Qty 1 + Qty 10 + Qty 20 + A23 SB-2970 $ 3.95 $ 3.55 $ 3.15
12V Panasonic AlkalineCar alarm battery.
• LRV08, A23, L1028.
Cordless Telephone Batteries – Extended RangeReplacement batteries for cordless telephones.
3.6V 600mAh Ni-MH• Nominal voltage 3.6V • Nominal capacity 600mAh• Bank of three batteries next to each other• Dimensions: 30(H) x 14(W) x 41(L)mm• Supplied with lead and two pin Mitsumi plug. • Suits Panasonic KXT3716, 3806, 3826, 4026,
4027, 4036, 4046, 4047, 4300 & 4317• Uniden CT301, XC360, XC310, XC320, XC340, XC610• Also suits various Sony & James Hardie phones.
Telephone Batteries to Suit Uniden Phones A collection of replacement batteries suitablefor Uniden cordless phones. All are heatshrink wrapped with suitable connectors soit's a simple drop in replacement.
A SHORT STORYMany of you know that I worked for Dick Smith at Dick Smith Electronics for the secondhalf of the 70's. I had a great time there and learnt a lot - much of which I applied atJaycar. But that’s another story!
Before I worked for Dick I basically worked in the industrial electronics industry, mainlyas a technical sales representative. I was lucky to have worked at the tail end of themassive post WWII manufacturing boom.
A company that I worked for at the time had a portfolio of the most interesting andtechnical products you can imagine. On one day I might be at CSIRO Radiophysics inEpping, Sydney talking to scientists about millimetre wave waveguides or ferritecirculators, or I would be at STC Liverpool in Sydney selling them premixed epoxy resinpowder, frozen at -4˚C so that it did not go off before it went into an injection mouldingmachine. This epoxy was used to encapsulate IN4000 and IN5400 series diodes to makethem almost hermetic.
As you can imagine I got to know a lot of very interesting and talented people.
Little did I know that years later I would get a call from an old chum at STC (Now ITT). Hetold me that they were basically dismantling the Liverpool factory and had come acrossabout 1/2 a million IN4004 diodes that were clearly now surplus to their needs and wouldDSE (my employer) want to buy them?
Dick and I worked very closely together at the time and he got very excited about this.As is the case with both Dick and myself's competitive nature, we jostled with the STCguy to see how cheaply we could buy them.
Suffice to say we bought them - at a price that was less than the value of the epoxy resinin each diode.
3.6V Lithium Computer BackupsThese high capacity batteries are used in manydesktop and notebook computers to retain date,time and configuration information while thecomputer is switched off. They are alsouseful where long shelf life is importantor when the battery is to be fitted intodifficult or sealed access areas. Storagelife is up to 10 years.
• 14.5mm diameter • Not rechargeable.
Ò Cat. Qty 1 + Qty 10 + Qty 20 + Half AA SB-1770 $ 11.95 $ 10.70 $ 9.50 Half AA SB-1771 $ 13.95 $ 12.35 $ 10.95 AA SB-1774 $ 16.95 $ 14.95 $ 13.35 AA SB-1775 $ 18.95 $ 16.95 $ 14.95
SB-1770 SB-1774 SB-1771 SB-1775
1.5V Lithium Long Lasting Batteries The perfect power source for high drain current draw cameras, camcorders, personalstereos, mobile phones, palm top computers and TVs.
• Up to 3 times the life of any alkaline battery.• Up to 10 times the life of ordinary carbon zinc battery • Guaranteed shelf life up to 10 years.• 1.5V, 1.4Amp hour (AA).• Blister Packed• Not rechargeable.
Eclipse Lithium 9V Battery 1200mAhAs you know, lithium batteries are essential for such things as smoke detectors, wirelessalarm systems, garage door opener remotes etc. They are a bit more expensive, butyour family's lives are worth a couple of bucks.
Available in single or twin pack:
• Not rechargeable.
Please note that the physical size of these batteries is slightly different to standard 9V batteries.
Cat. Size Capacity (mAh) Max Current (mA) Height Connect (mm)SB-1770 Half AA 900 50 25mm NippleSB-1771 Half AA 900 50 25mm Axial Lead SB-1774 AA 2000 100 50mm Nipple SB-1775 AA 2000 100 50mm Axial Lead
Cat. Type Volt CurrentSB-2400 CR123A 3V 1300mASB-2401 CR-P2 6V 1300mASB-2402 2CR5 6V 1300mASB-2404 CR2 3V 750mA
LITHIUM BATTERIES
COMPUTER BACKUP
CR123A 3V Lithium Batteries 6 Pack Contains 6 CR123A lithium camera batteries,commonly used in LED torches and cameras.
• Not rechargeable
Eclipse Plus Lithium AAA 1.5V Battery Packs This range of Lithium Iron Disulfide (LiFeS2) batteries pack 5-6times the capacity of their alkaline equivalents in high powerapplications. Using these represents a 40-60% cost savingover alkaline batteries. Refer to our website for dischargeperformance specifications with comparison to leading brandname Lithium batteries.
• Not rechargeable
Eclipse Plus Lithium AA 1.5V Battery Packs This range of Lithium Iron Disulfide (LiFeS2) batteries pack 5-6times the capacity of their alkaline equivalents in high powerapplications. Using these represents a 40-60% cost savingover alkaline batteries. Refer to our website for dischargeperformance specifications with comparison to leading brandname Lithium batteries.• Not rechargeable
Panasonic® Lithium Camera Batteries • Not rechargeable.
LITHIUM CAN BE DANGEROUSAll the batteries on this page are non-rechargeable. Do not try to recharge any of these lithium batteries.
There are basically two types of lithium batteries: rechargeable and non-rechargeable.Rechargeable batteries are usually referred to as Lithium-Ion or Lithium Polymer. TheONLY WAY to recharge such batteries is with a dedicated charger for the particularbattery size, such as CRV-3 or CR123A types. Such chargers are specifically designed tostrictly manage the special charge rate requirements for rechargeable lithium ion orlithium polymer cells.
Standard Lithium non-rechargeable batteries are not designed to be recharged - evenwith a Lithium-Ion or Lithium-Polymer charger. Indeed there is a VERY HIGH likelihoodthat the battery will violently EXPLODE if any attempt is made to charge a standardLithium battery. DO NOT try to recharge ANY lithium battery with an undedicated charger,such as lead acid or Ni-Cd charger, under any circumstances.All batteries on this page are non-rechargeable. Do not try to recharge any of theselithium batteries.
TECH TALK!!
LiFePO4 EXPLAINEDLithium iron phosphate (LiFePO4) is a technology proving to overcome the safetyconcerns that exist with Lithium ION (Li-ION) and other lithium battery technologiesbecause it is chemically more stable. In particular, LiFePO4 is able to deliver extremelyhigh surge currents without risk of the battery chemistry breaking down (and the batteryexploding), holds a charge for a very long time, and is far more stable when exposed tohigh heat and other environmental conditions.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
45 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
TYPE (CHEMISTRY)
COMMONNAME(S)
NORMALCELL VOLTS
INTERNALRESISTANCE
MAX DISCHARGE
RATEPROS & CONS TYPICAL APPLICATION
Carbon-Zinc StandardDuty 1.5 MEDIUM MEDIUM Low cost, available in various sizes; but terminal
voltage drops steadily during cell life.Torches, radios, toys, & general purpose,
electronic equipment.
Zinc Chloride Heavy Duty 1.5 LOW MEDIUM TO
HIGHLow cost, better at higher discharge rates & at lower
temperatures; terminal voltage still drops.Cassette tape players/recorders & other motor-driven items,
clocks, calculators, remote controls, multimeters, etc.
Alkaline - Zinc-Manganese Dioxide Alkaline 1.5 VERY LOW HIGH Better for high continuous or pulsed loads and at low
temperatures; but terminal voltage again drops.
Heavy duty torches, photoflash units, battery shavers,digital cameras, hand-held transceivers, portable CD
players etc.Lithium-
Manganese Dioxide Lithium 3.0 LOW MEDIUM TOHIGH
High energy density, very low self-discharge rate(excellent shelf life) good temperature tolerance.
Watches, calculators, cameras (digital & film), DMMs, and other test instruments.
Zinc-Mercuric Oxide Mecury Cel 1.35 LOW LOW High energy density (compact); very flat discharge
curve; good at higher temperatures.Calculators, pagers, hearing aids, watches,
test instruments (voltage reference).
Zinc-Silver Oxide Silver Oxide Cell 1.5 LOW LOW High energy density (very compact); very flat discharge
curve; reasonable at lower temperatures.Calculators, pagers, hearing aid, watches,
test instruments (voltage reference).
Zinc-Oxygen Zinc Air Cell 1.45 MEDIUM LOW High energy density, very lightweight; flat discharge
curve; but must have access to air. Hearing aids and pagers.
1.5V Silver Oxide BatteriesThese batteries generally have a protective layer of silicon on them. Please wipe with a cloth and avoid touching with fingers before installing them.
1.5V Alkaline Batteries
Type #Capacity Eveready Vinnic Maxell IEC Other Pk. Dia x H(mm) Cat. Qty 1 + Qty 8 + Qty 15 +357 155mAh 357 S1154E SR44W SR44 613/RW12/32/S1154S ea 11.6 x 5.4 SB-2512 $ 1.95 $ 1.75 $ 1.55 362 21mAh 362 S721E S721SW SR58 SG11/SR720/532/19/RW310 ea 7.9 x 2.1 SB-2530 $ 1.95 $ 1.75 $ 1.55 364 20mAh 364 S621E S621SW SR60 SG1/SR620/531/31/RW320 ea 6.8 x 2.1 SB-2501 $ 1.95 $ 1.75 $ 1.55 371 44mAh - - SR920SW SR69 SG6/537/30/RW315 ea 9.5 x 2.1 SB-2534 $ 1.95 $ 1.75 $ 1.55 377 27mAh - - SR626SW SR66 SG4/37 ea 6.8 x 2.6 SB-2504 $ 1.95 $ 1.75 $ 1.55 389 60mAh - - SR1130SW SR54 RW49/AG10/G10/SG10/554/390 ea 11.6 x 3.05 SB-2508 $ 1.95 $ 1.75 $ 1.55 391 40mAh - - SR1121W SR55 SG8/68/553/28/RW40 ea 11.6 x 2.1 SB-2542 $ 1.95 $ 1.75 $ 1.55 392 38mAh - - SR41W SR41 SG3/63/547/2/RW27/RW47 ea 7.9 x 3.6 SB-2502 $ 1.95 $ 1.75 $ 1.55 393 65mAh - - SR754W SR48 SG5/65/546/15/RW28/RW48 ea 7.9 x 5.4 SB-2532 $ 1.95 $ 1.75 $ 1.55 396 25mAh - - SR726W SR59 SG2/556/29/RW411 ea 7.9 x 2.6 SB-2510 $ 1.95 $ 1.75 $ 1.55 399 42mAh - - SR927W SR57 SG7/SR926/543/35/RW413 ea 9.5 x 2.7 SB-2536 $ 1.95 $ 1.75 $ 1.55
Type # Capacity Eveready Vinnic Maxell VARTA Other Pk. Dia x H(mm) Cat. Qty 1 + Qty 8 + Qty 15 +LR936 45mAh - LR45 AG9 ea 9.5 x 3.6 SB-2513 $ 1.50 $ 1.35 $ 1.20 LR43 90mAh 166 - LR43 V12GA - ea 11.6 x 4.2 SB-2514 $ 1.50 $ 1.35 $ 1.20 LR44 120mAh A76 - LR44 V13GA 357A ea 11.6 x 5.4 SB-2516 $ 1.50 $ 1.35 $ 1.20 LR44 (Panasonic) 120mAh LR44 - LR44 V13GA 357A ea 11 x 5 SB-2950 $ 3.95 $ 3.55 $ 3.15
3V Lithium Batteries • Not rechargeable.
Type # Capacity Pk. Dia x H(mm) Cat. Qty 1 + Qty 8 + Qty 15 +CR1220 30mAh ea 12 x 2.0 SB-2527 $ 2.95 $ 2.60 $ 2.30 CR1616 45mAh ea 16 x 1.5 SB-2525 $ 2.95 $ 2.60 $ 2.30 CR1620 50mAh ea 16 x 2.0 SB-2526 $ 2.95 $ 2.60 $ 2.30 CR1632 150mAh ea 16 x 3.2 SB-2529 $ 2.95 $ 2.60 $ 2.30 CR2016 60mAh ea 20 x 1.6 SB-2524 $ 2.95 $ 2.60 $ 2.30 CR2025 110mAh ea 20 x 2.5 SB-2520 $ 2.95 $ 2.60 $ 2.30 CR2032 140mAh ea 20 x 3.2 SB-2522 $ 2.95 $ 2.60 $ 2.30 CR2450 (Eclipse) 575mAh ea 25.5 x 5.0 SB-2946 $ 5.95 $ 5.25 $ 4.75 CR2430 270mAh ea 24.5 x 3.0 SB-2523 $ 2.95 $ 2.60 $ 2.30
Type # Capacity Pk. Dia x H(mm) Cat. Qty 1 + Qty 10 + Qty 20 +CR2016 90mAh ea 20 x 1.6 SB-2940 $ 4.95 $ 4.45 $ 3.90 CR2025 165mAh ea 20 x 2.5 SB-2942 $ 4.95 $ 4.45 $ 3.90 CR2032 220mAh ea 20 x 3.2 SB-2944 $ 4.95 $ 4.45 $ 3.90
Standard Button Cell HolderPCB mount holder, suits button cells, with diameter up to 20mm, which includes the 3V lithium batteries.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
46 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Size Current V Per Charging Charging Charging Terminal Cat. Qty Qty Qty Capacity Rate Slow Rate Standard Rate Fast Type No. 1 + 8 + 15 + mAh 15 Hours 5 Hours 1.5 HoursAAA 900 1.2 EA 90 270 900 Nipple SB-1723 $ 2.95 $ 2.60 $ 2.30 AAA 900 1.2 EA 90 270 900 Solder tabs SB-1724 $ 3.95 $ 3.45 $ 3.15 AA 2000 1.2 EA 200 650 2000 Nipple SB-1706 $ 4.25 $ 3.75 $ 3.30 AA 2000 1.2 EA 200 650 2000 Solder tabs SB-1708 $ 4.45 $ 3.95 $ 3.45 AA 2400 1.2 EA 240 750 2400 Solder tabs SB-1728 $ 4.95 $ 4.45 $ 3.90 AA 2500 1.2 EA 260 800 2500 Nipple SB-1744 $ 5.95 $ 5.25 $ 4.75 AAA 900 1.2 Pkt 4* 90 270 900 Nipple SB-1739 $ 11.95 $ 10.75 $ 9.55 AA 2000 1.2 Pkt 4* 200 650 2000 Nipple SB-1737 $ 15.95 $ 14.35 $ 12.70 AA 2500 1.2 Pkt 4* 260 800 2500 Nipple SB-1738 $ 19.95 $ 17.95 $ 15.95 Size Current V Per Charging Charging Charging Terminal Cat. Qty Qty Qty Capacity Rate Slow Rate Standard Rate Fast Type No. 1 + 8 + 15 + mAh 15 Hours 5 Hours 1.5 Hours4/3 A 3500 1.2 EA 350 1050 3500 Solder tabs SB-1711 $ 9.95 SUB C 3300 1.2 EA 350 670 3300 Solder tabs SB-1611 $ 8.95 $ 7.95 $ 6.95 D 5000 1.2 EA 500 1500 5000 Nipple SB-9010 $ 12.95 $ 11.35 $ 10.35 D 9000 1.2 Pkt 2* 900 3000 9000 Nipple SB-1734 $ 44.95 $ 40.45 $ 35.90 SUB C 24001 1.2 EA 240 740 2400 Solder tabs SB-1617 $ 6.95 $ 6.25 $ 5.50 9V 200 8.4 EA 20mA 60mA Clip SB-2467 $ 13.95 $ 12.55 $ 11.15 C 4500 1.2 Pkt 2* 450 1500 4500 Nipple SB-1733 $ 22.95 $ 20.65 $ 18.35 Note 1: Cat. SB-1617 high power battery with peak pulse discharge up to 30A and constant current discharge to 15A. All Sub C & D size Ni-MH batteries have new heavy duty solder tabs.
SB-1723 SB-1724
SB-1708** SB-1728**
SB-1744SB-1706**
AAA SIZE
Nickel Metal Hydride (Ni-MH) batteries offersuperior features to nickel cadmium (Ni-Cd)rechargeable batteries. These features include:
• No memory effect • Higher current capacities • High drain performance
SB-1711
SB-1611 SB-1617 SB-1733
SB-1734SB-9010 SB-2467
4/3A SIZE
SUB C SIZE
9V SIZE
C SIZE
D SIZE
*Supplied in Blister Packs
Panasonic Eneloop Ni-MH Pre-Charged Rechargeable Batteries This range of Panasonic Eneloop batteries have numerous advantages over regularrechargeables. Key characteristics include low self-discharge, they are pre-charged socan be used right out of the packet, and can be recharged up to 1800 times. After 5years of storage they will retain 70% of their capacity once fully charged. A far moreenvironmentally friendly option than churning through dozens of alkalines.
PANASONIC ENELOOP NI-MH 1.2V 2000MAH - AA 2 PACK SB-2930
PANASONIC ENELOOP NI-MH 1.2V 2000MAH - AA 4 PACK SB-2931
Panasonic XX High Capacity Eneloop Ni-MH 1.2V - 4 Packs For even more demanding applications the Panasonic XX High Capacity range areperfect. They provide a massive 2500mAH capacity (AA size), can be recharged 500times, and will retain 75% of their capacity after a year in storage. They can also beused in sub-zero temperatures (-20°C) without issue. The high capacity allows you totake up to 5x more pictures with your digital camera.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
47 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
7.2V 3300mAh Ni-MHRC BatteryHigh capacity, high current dischargeNi-MH pack for radio control cars. Fittedwith standard "Tamiya" type plug.
Ò Type Cat. Qty 1 + Qty 8 + Qty 15 + Sub C 3300mAh SB-2314 $ 49.95 $ 44.90 $ 39.90
Long Life Pre-Charged Rechargeable Batteries - 1.2VLike the Panasonic Eneloop batteries, this has all the benefitsof disposable batteries, but are rechargeable - it featuresultra-low self-discharge technology so they can be usedimmediately after purchase. It retains 85% of initial capacityafter 1 year of storage, are environmentally friendly and isideal for the most demanding of modern digital devices.
• Supplied in a protective storage case
Ò Type Cat. Qty 1 + Qty 8 + Qty 15 + AA Single - 2000mAh Solder Tags SB-1751 $ 4.95 $ 4.45 $ 3.90
High Discharge 3300mAh Ni-MH Sub C Battery Perfect replacement for Ni-Cd batteries in power tools and other battery packs.This high discharge Sub C can discharge at over 40A makingit clearly superior to the old Ni-Cd technology, effectivelymaking it obsolete. Supplied fitted with quality solder tabs to make into battery packs either as replacements for Ni-Cd batteries or for new projects.
Ò Type Cat. Qty 1 + Qty 8 + Qty 15 + Sub C 3300mAh SB-1611 $ 8.95 $ 7.95 $ 6.95
Ò Type Cat. Qty 1 + Qty 8 + Qty 15 + Sub C 1800mAh SB-2468 $ 7.95 $ 7.15 $ 6.35
Ni-Cd Rechargeable Battery Sub C
Note 1: At 20°C Note 2: Similar to batteries used in the Braun electric toothbrush (2 required).
Specifications SB-2468Size SUB CCurrent Capacity 1800mAhVoltage 1.2VCharging rate standard 180mA for 14-16 hours1
Charging rate Fast 4-5 hours1 600mATerminal type Solder tabs
LI-ION RECHARGEABLE BATTERIES
NI-CD RECHARGEABLE BATTERIES
NI-MH RECHARGEABLE BATTERIES (CONTINUED)
LIFEPO4 RECHARGEABLE BATTERIES
LiFePO4 Rechargeable Batteries Lithium iron phosphate (LiFePO4) is a more chemically stable type of lithiumrechargeable cell that is becoming increasingly popular, due to the increased safety andlonger cycle life over traditional Li-ion cells. They have a slightly lower capacity andnominal voltage than equivalent Li-ion cells, but can be charged/discharged around2000 times (versus 500-1000 for Li-ion), and can deliver higher peak currents. We now offer a couple of common sizes:
14500 3.2V 600MAH LIFEPO4• Capacity: 600mAh• Dimensions: 14(diam) x 50(L)mmSB-2305
18650 3.2V 1600MAH LIFEPO4• Capacity: 1600mAh• Dimensions: 18(diam) x 69(L)mmSB-2307
26650 3.2V 3400MAH LIFEPO4• Capacity: 3400mAh• Dimensions: 68(L) x 21(Dia.)mm
TECH TALK!Will stay charged even whenstored for long periods
14500 800MAH 3.7V SOLDER TAG• Dimension: 48(L) x 8(Dia.)mm SB-2300
Rechargeable Li-ion batteries Choose between nipple or solder tabs to makeinto battery packs for replacement or newprojects. Commonly used in LED torches.
18650 2,600MAH 3.7V NIPPLE• Dimension: 65(L) x 18(Dia.)mmSB-2308
14500 800MAH 3.7V SOLDER TAG• Dimension: 48(L) x 8(Dia.)mm SB-2301
26650 3,400MAH 3.7V NIPPLE• Dimension: 68(L) x 21(Dia.)mmSB-2315
26650 3,400MAH 3.7V SOLDER TAG• Dimension: 68(L) x 21(Dia.)mmSB-2319
18650 2,600MAH 3.7V SOLDER TAG• Dimension: 65(L) x 18(Dia.)mmSB-2313
USB Rechargeable Batteries These 1500mAh AA size batteries simply plug into any powered USBport to be recharged. They're a brilliant idea for battery operated PCinput devices such as a mouse or keyboard.
• 1.2V• USB adaptor included• Supplied as pack of 2
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
48 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
AAA & AA CHARGERS
2 Hour Fast Charger For AA/AAA Ni-MH Batteries Recharge up to four AA or AAA Ni-MH batteries. This handy charger, which utilises Delta V voltagedetection, charges batteries to their optimal level toensure long life. Charge state can be monitored onthe integrated electric blue LCD. Charge on the gowith the car cigarette lighter cord included as wellas the mains plugpack.
• Easy to read and backlit LCD• Includes bad cell detection• Charge at the home, office or on the road• Delta V detection and cut-off• 1150mA charging current for AA batteries• 600mA charging current for AAA batteries• Supplied with mains plugpack and car
charging cable• Dimensions: 105(L) x 68W) x 30(H)mm
60 Minute Fast Charger with USB Port Recharge up to 4 x AA or AAA Ni-MH batteries fast with this handy charger. Using Delta -V voltage detection, 4 individual channels and an auto cut-off safety timer. Alsofeatures LED indicators that show the charging status for eachchannel. Loaded with a USB port capable of 2.1A, great forcharging digital cameras, GPS, Smartphones, iPhones® or iPads®
and tablets. 240VAC adaptor and a 12VDC adaptor.
• Suitable for 1-4 AA or AAA batteries• Charge current 2000mA for AA, 850mA for AAA• Dimensions: 114(L) x 75(W) x 30(D)mm
Universal Ni-Cd/Ni-MH Battery ChargerWith Cut-Off An affordable universal batterycharger that will re-charge Ni-MH/Ni-Cd batteries in AA,AAA, C, D as well as 9V. It will alsoensure long battery life by cutting-offthe voltage when they are fullycharged. The unit can charge invarious configurations, for example 2 x 9V and 4 x AA batteriessimultaneously.
• Recharges: AAA, AA, C , D and 9V batteries• Cut-off function• Accepts various combinations of batteries• Dimensions: 199(L) x 100(W) x 46(H)mm Note: Batteries not included
12VDC & 240VAC Smart Battery Charger Ni-Cd & Ni-MHAccepts a combination up to 10 x AA or AAA cells and 2 x 9 volt batteries.The integrated discharger can fully flatten thebattery before charging to help minimisememory effects. Uses Delta V sensing toachieve the maximum charge. Chargingtimer protects against overcharging &individual LEDs show battery status.
• Charges up to 10 AA or AAA batteries• Mains power adaptor supplied• Dimensions: 220(W) x 40(H) x 115(D)mm
Panasonic Ni-MH Battery Charger with 4 Eneloop Batteries Charges both AA and AAA batteries and includes 4 x AA pre-charged Eneloop batteries. Eneloopbatteries are ready for action straight from the shelf asthey discharge at an extremely low rate. They can berecharged approximately 1,800 times (compared toapprox 500 times for a regular rechargeable).
• Plug-in style wall charger (240V)• Approx. 10 hour charge time• Includes 4 x AA Eneloop 2,000mAh batteries• Dimensions: 75(W) x 118(H) x 40(D)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
49 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
AAA, AA, C, D, 9V CHARGERS (CONTINUED)
Universal Programmable Balanced Battery ChargerParticularly suited to radio control hobbies, it charges, discharges and balances Li-Ion,Li-Po, Ni-Cd, Ni-MH and lead-acid batteries. Li-Po batteries are balance-charged sothere's no risk of damage or explosion from incorrect charging. The charging cycle isprogrammable and the whole process, or the charging of each individual cell can bemonitored on the LCD screen. It can be powered with a mains plugpack or directly froma 12V battery or any other DC source from 10 - 18 volts. You'll need a fairly beefy mainssupply capable of supplying about 5 amps. A variety of adaptors are included - glowplug, alligator clip, 2 and 3 pin battery packs and it also features balance chargeconnectors on the main housing.
Charging capacity:• Up to 15 Ni-Cd or Ni-MH cells• 2, 3, 4, 5 or 6 cell Li-Po packs• 2 - 20V lead-acid • Charge current: 0.1-5.0A• Discharge current: 0.1-1.0A• Current drain for balancing Li-Po: 300mAh/cell• Microprocessor controlled• Delta V charging detection• 2, 3, 4, 5 and 6 cell balanced charging outputs• Recommended mains power supply Cat. MP-3243• Dimensions: 132(L) x 82(W) x 28(H)mm
Li-ion CR123A Battery Charger CR123A batteries are commonly used in some LED torches and many cameras but thereplacements are expensive. Now there's a rechargeable option with this lithium-ionCR123A battery & matching charger. Normally, Li-ION batteries have a nominal voltageof 3.7V, which being higher than a normal CR123 battery can damage the sensitivecircuitry of LED torches and cameras - but this battery is different! The battery featuressmart circuitry inside that drops the voltage to 3.0V under load, making it perfectly safeto use with sensitive electronics that normally use a 3.0V CR123 battery. The intelligentdesign will fully recharge the included battery in about 3 hours and shows an LED charge status indicator.
• Automatic charge control• Short circuit & over voltage protection• Supplied with mains plugpack and car charging cable• Smart battery technology keeps nominal voltage to 3.0V
Replacement CR123A 650mAh battery Cat. SB-2411 sold separately
Specifications MB-3581 Battery voltage 3VDC Charge time 3 hours Charger input 12VDC Dimensions 90(L) x 40(W) x 25(H)mm
SB-2411 MB-3581
Universal Li-ion/Ni-Cd/Ni-MH Battery Charger This cleverly designed charger to charge various Li-ion battery packs, as well as AA,AAA or 9V Ni-MH and Ni-Cd rechargeable batteries. Housed with a spring loaded coverfor clamping down batteries, two Delta-V controlled single cell channel and twoadjustable contact pins which are polarity sensing for that added convenience. A USBport on the side accommodates the charging needs for your iPhone®, Smart phone orany USB power device. Topped off with an LCD for displaying the battery type, voltageand charge status. Perfect for digital camera, cordless phone and MP3 player batteries.The charger is supplied with both mains and car adaptors.
• Suitable for: 1 x 3.6V or 7.2V Li-ion battery packs1-2 x AA/AAA Ni-MH or Ni-Cd batteries1 x 9V Ni-MH
• USB output: 5VDC, 500mA• Dimensions: 120(L) x 62(W) x 35(H)mm
Note: iPhone®, charging cable and batteries not included
Universal Li-ion Cylinder Battery Charger with USB Can accommodate 1 or 2 AA Ni-Cd/Ni-MH batteries or avariety of cylinder shaped Li-ion/Li-Po batteries. It achieves thiswith an adjustable battery contact. There is also a handy USBport that outputs 2.1A so you can charge your iPad® andSmartphones with ease. Compact size for easy transportation.Includes 5V 2.1A mains adaptor.
Suitable for 18650, 14500, 18500, 17670, 17500, 16650, 22650
Dimensions 110(L) x 48(W) x 27(D)mmNote: Batteriesnot included
Universal Lithium Cylinder Battery Charger A universal smart charger with dual independent charging slots for charging Li-ion, Li-Po and LiFePO4 cylinder cells. Theadjustable battery contacts means this charger is suitable forthe plethora of available lithium cell sizes such as 14500,CR123A and 18650 to name a few. It can also charge Ni-Cd andNi-MH in AA and AAA sizes as well as 9V. It features an LCD toshow the status of capacity, voltage, time and battery condition(poor/fail). It can be powered using the supplied mains poweradaptor, 12V cigarette lighter lead, or via USB inputs.
Battery / Bulb / Fuse TesterBattery tester with fuse and bulb checker. Tests AAA, AA,C, D (1.5V) & 9V batteries on the easy-to-read, colour-coded analogue display. It checks bulbs and fuses, givinga 'good' or 'replace' indication, and will also test larger1.5V button batteries like the LR-44. There is also a handycompartment to store spare fuses, bulbs and button cells.
• Very accurate• Measures: 150mm long • Uses 9V Battery (included)
If you are a serious battery user you would be crazy not toown one of these. Kids are notorious for throwing good batteries in the bin!
All in One Battery TesterHere's a modern day battery tester to suit all yourneeds. This handy unit will test all types of batteriescurrently out there on the market including standardAA/AAA/C/D/9V batteries, button cells and lithiumbatteries such as those used in digital cameras. TheLCD indicates the level of capacity so you'll neverget caught out on a day trip with 1/2 flat batteries inyour digital camera.
• One product to test all those batteries in yourkitchen drawer before use!!
Battery Organiser with Tester Batteries are too expensive to waste and thiswell-designed organiser is an easy way to makethe most of them. Hanging on a wall or flat in adrawer it holds 8 x D, 10 x C, 25 x AA, 10 x AAAand 8 x 9V batteries and you can store buttonbatteries in the little drawer. There’s even aremovable tester so you can be sure each one isready to use.
4 x AA Battery Container PACK OF 2Handy battery containers to store your AA batteries.Perfect for every digital camera ownerwho should have a spare set ofbatteries, charged and ready to go.Each container holds up to 4 x AAbatteries and measure only 65mmwide, easily fitting in the pocket,purse or camera bag.
• One red andone bluesupplied.
Batteries not included
2 X AA SWITCHED BATTERY ENCLOSURE• Size 68(L) x 33(W) x 19(H)mm• 150mm long tinned leads• Slide on/off switch
3 X AAA BATTERY HOLDER FOR LED LIGHTS Round battery holder that holds 3 x AAAbatteries. Suits LED torches and bike lights,including ST-3465, ST-3456 and ST-3475. Have a fewhandy, loaded withbatteries (availableseparately), if you'regoing long distance.
• Dimensions: 53.5(L) x 22.3(Dia)mm (without batteries)
4 X AAA SWITCHED BATTERY ENCLOSURE • High quality ABS holder
BEST QUALITY "SAFETY" 9V BATTERY CLIPWe call these safety clips because the side of the cliptotally covers the battery terminals and sits flush on thetop of the battery. Supplied with high quality AWG24connection cable.
Battery Bank 4 x AA with USB Socket & SwitchProvides 5VDC power though the USB socket by using 4x AA batteries. The unit makes a superb back-up chargerfor any USB powered device such as an MP3 player orPDA and also features a slide on/off switch.
4 X AA WATERPROOF BATTERY ENCLOSURE Simply add your own AA batteries and you have a6V power source to power your gadgets whenmains power is not available. It is water anddustproof, so it can be used outdoors, whichcould include powering outdoor weathersensors, tank level meters, door entrybuzzers, decorative LED lighting, etc.
• High impact resistant ABS plasticenclosure with a nylon cable gland
• Rated IP68 to provide protectionagainst oil, dust and water
• Enclosure is secured by brass nutsmoulded in the interior of the basewith 4 x supplied self tapping screws
• Includes 150mm long tinned leads • Dimensions: 79(L) x 67(W) x 23(H)mm
4 X AA SWITCHED BATTERY ENCLOSURE WITH 2.1MM DC PLUG • High quality ABS holder with
on/off switch and sliding cover• Includes 150mm lead 2.1mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
52 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Solid LED Strip Lights - 12VDC An efficient, bright and affordable LED lighting solution, which is safe and easy to install. Each strip features wide angle, high brightness SMD LEDs which are powered by 12VDC. They are fixed easily using the strong 3M brand self adhesive backing tape or mounted into a range of aluminium and plastic extrusions and diffusers available separately. Each 500mm length can be snapped into individual segments and are powered by either 12VDC or 24VDC. Applications include under cabinet kitchen bench lighting, hallwayor mood lighting, marine/caravan/motorhome lighting, commercial strip lighting, retailshop fit outs, and many many more.
• Available in 8mm and 11mm widths, 12VDC
Features:• 8mm strips fitted with 3528 single chip SMD LEDs• 11mm strips fitted with 5050 tri-chip SMD LEDs• Strips can be snapped into individual segments and powered individually• Strips can be integrated with our aluminium
and plastic extrusions and diffusers
Ò Size Colour Voltage Cat. Qty 1 + Qty 10 + Qty 25 + 8mm Cool White 12V ZD-0461 $ 14.95 $ 13.35 $ 10.35 11mm Cool White 12V ZD-0552 $ 24.95 $ 22.45 $ 17.45
SOLID LED STRIP LIGHTING
Specifications ZD-0461 ZD-0552Voltage 12VDC 12VDCColour White WhiteCurrent 200mA 500mALumen output 150 390LED quantity 30 x 3528 30 x 5050No. of segments 10 10Light angle 120º 120ºDimensions 500 x 8mm 500 x 11mm
IP65 LED Lighting Module Strings - 12VDC A very flexible and weatherproof (IP65) solution for low power lighting; use forbacklighting of signs, illuminating stairwells, marine lighting, caravan lighting, etc.Each string is supplied as a 1m length of wire, with ten "modules" containing threehigh brightness SMD LEDs along the length of the string. You can cut the string tosupply power to each module separately if you wish, allowing for a whole host ofdifferent applications. Simply provide 12VDC power and you are in business.Available in standard 3528-LED or ultra-bright 5050-LED versions, in cool white orblue colours depending on the model you choose.
LED Light Strips with Switch - 12VDC A quick and easy LED strip light solution. The LED strip is pre-assembled in the channeldiffuser with an integrated switch encased in attractive anodised aluminium alloy. Theyfeature a generous beam angle with evenly distributed light thanks to the frosted whitediffuser. Great for use on window displays, restaurant foyers, showrooms, hotels, andcaravan or RV applications. Four mounting screws are included for fast and easyinstallation. Available in 48 and 84 LED strips.
Features for both• Input: 3.5 x 1.35mm DC socket centre positive• LEDs: 3528 SMD • 4 x mounting screws included
Two models available:
48 LED LIGHT STRIPST-3930
84 LED LIGHT STRIPST-3932
Suitable accessories: IN-LINE DIMMER:ST-3938 - 12VDC/24VDC LED Dimmer Switch
Workbench sent to us by: Robert Jaycar Stockist: Batteryland Bairnsdale - Bairnsdale This is part of my workshop. I am 74 years of age & retired I am very involved in theNicholson Model sailing Club and building and racing model yachts, metal casting,jewellery making, model steam engines & boats, RC equipment and glass fusing &slumping etc
I spend at least 8 hours a day on hobbies and could really do with a 36 hour day
For more details, visit:www.jaycar.com.au/workbench
Specifications ST-3930 ST-3932Power rating 12VDC 5W 12VDC 9WColour temperature 6000-6500K, Cool white 6000-6500K, Cool whiteLumens 280 520Dimensions 313(L) x 30(W) x 12(H)mm 513(L) x 30(W) x 12(H)mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
53 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
SOLID LED STRIP LIGHTING (CONTINUED)
LED Aluminium Light Strip with Switch - 240VAC A range of LED aluminium light in elegant aluminium strips. A simple and straightforward solution; each strip is terminated with a 240V plug and lead. No timeconsuming wiring and costly electricians are required. Simply plug in to the mainsoutlet and you have instant lighting solution. It has a built-in switch and is IP44 ratedmaking it ideal for kitchen, under cabinets, book cases, bathroom lighting applications.Power consumption is significantly lower than fluorescent alternatives.
• LED Light strips meet SAA Safety approvals.
24 LED ALUMINIUM LIGHT STRIP• 350 lumens• 450mm longST-3944
48 LED ALUMINIUM LIGHT STRIP• 650 lumens• 850mm longST-3946
78 LED ALUMINIUM LIGHT STRIP• 950 lumens• 1200mm longST-3948
Linkable Aluminium LED Strip Lights - 12VDC A stylish aluminium LED strip light kit. Suitable for caravan, marine, 4WD, auto anddomestic applications. Connect multiple lights together with the included connectors tomatch your desired length and application. Supplied with a 100mm DC plug with leadfor hardwiring, connecting adaptor and cable as well as a right angle adaptor. Screwmounting holes provided on the ends for easy installation in three different ways -180°, 360° and 90°.
• Available in 48 and 84 LED linkable strips
• Suitable in-line Dimmer use ST-3938• Colour: Cool white • Voltage input: 12VDC• Input: 3.5 x 1.35mm DC socket centre positive• LEDs: 3528 SMD
Specifications ST-3934 ST-3936Power rating 12VDC 5W 12VDC 9WColour temperature 6000-6500K 6000-6500KLumens 280 520Dimensions 324(L) x 30(W) x 12(H)mm 524(L) x 30(W) x 12(H)mm
LED Dimmer Switch - 12VDC Compact in-line dimmer suitable for dimmable LED lights. Rotate ON/OFF and to adjustlight level. Supplied with DC jacks for easy connection between LED lights and yourpower supply unit
• Suitable for use with our LED strip lights ST-3930, ST-3932, ST-3934 and ST-3936
Specifications ST-3938Operating voltage 12VDCOutput current (max) 2AOutput power (max) 24W/48WDimming 0 to 100%Colour WhiteDimensions 68(L) x 34(W) x 33(H)mm
FLEXIBLE LED STRIP LIGHTING
TECH TALK!
STRIP LIGHTINGOur range of LED strip lights are made using some of the most common type of SMDLEDs used in LED lighting products; the 3528 type, and the 5050/5060 type.
Their model designations actually come from their footprint dimensions:
3528 = 3.5x2.8mm, 5050 = 5.0x5.0mm, and 5060 = 5.0x6.0mm.
The 3528 type is a single LED emitter type in a very compact package, whereas the 5050and 5060 type are commonly referred to as "triple-chip" due to having three LED emittersbuilt into the one package.
The 3528 typically offers superior lumen performance per emitter and greater lightefficiency than 5050/5060, but the 5060/5060 triple-chip types are more cost effective dueto lower manufacturing costs and reduced production costs when built into a finishedproduct.
Specifications AllVoltage input 240VACIP Rating IP44Colour Temperature Cool White
Ultra Bright IP67 Waterproof LED Flexible Strip Light
A 1 metre long fully waterproof, flexible LED strip light that is perfect for any outdoorapplication needing some bright, reliable lighting. This flexible strip light uses 60 of thehighest brightness 5050-SMD type LEDs that are fully sheathed in a protective plasticcasing to protect from water, dust and damage. Features waterproof male/femaleconnections at each end to ensure that your power connection is also protected from the elements, and at the same time allows multiple strips to be daisy-chained together to create a longer length (up to 5m max).
When the absolute brightest light possible isn't what you are looking for, then thesecompetitively priced flexible LED strips are what you are looking for. These strips stilluse the same super efficient 5050 SMD LED package as our ultra bright LED strips, buteach LED has around 20-40% less light output that our ultra bright versions.Everything else is the same; there are 60 LEDs per metre, the flexible strip can be cutinto sections every third LED to create separate strips to your desired length, the stripis backed with 3M brand adhesive tape, and each section had solder pads to enableyou to wire up to your desired configuration. Sold as a full 5 metre reel in cool whiteand warm white colours, they are an excellent solution to thousands of lightingapplications such as display cabinets, under bench lighting, accent lighting,caravan/camping, 4WD, mood lighting, etc.
Two versions available.
Ò Price per Cat. Qty 1 + Qty 3 + Qty 6 + Cool White 5m Roll ZD-0575 $ 69.95 $ 62.95 $ 55.95 Warm White 5m Roll ZD-0577 $ 69.95 $ 62.95 $ 55.95
Specifications ZD-0575 ZD-0577Voltage 12VDC 12VDCColour Cool white Warm whiteCurrent per section 55mA 55mACurrent per metre 1100mA 1100mALumens per metre 970lm 950lm ZD-0575
Cigarette Power Lead to Suit ZD-0579 Cigarette lighter power lead with IP67 2.1mm DC plug.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
54 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
FLEXIBLE LED STRIP LIGHTING (CONTINUED)
RGB LED Flexible Strip Lighting Kit with Effects
An easy to setup RGB LED strip that canproduce an array of dazzling effects. Thedevice controls each bank of 3 x LED'sindividually to create effects that emulateflowing water, a shooting star, curtainsopening, a colour gradient and more. Usingthe remote control you can switch all LEDsto white, red, green, blue, yellow, purpleetc, adjust the brightness or set it up tocycle through all the different effects. Lighting applications include cinema foyers,nightclubs, casinos etc.
The kit includes a 5m reel of high brightness RGB LEDs with 3M adhesive backing, apower supply remote control, and a joiner to connect LED strips together.
Kit contains:• 5m RGB LED lighting strip• Infrared remote control• Power supply• LED strip joiner
Specifications SL-3954Input voltage 12VDC5m reel contains 150 X RGB LEDsController dimensions 94(L) x 58(W) x 25(H)mm
RELATED PRODUCTS
12V PSU
FROM
MP-3490 $ 29.95
P 28 DC PLUG
FROM
PP-0509 $ 1.95
P 225 12V BATTERY
FROM
SB-2486 $ 34.95
P 6 CABLE TIES
FROM
HP-1200 $ 1.85
P 208
Flexible LED Strip Light with Hook & Loop Backing
A simple solution for campsite lighting. Just plug it into a 12V cigarette lighter socket,flick the switch and you have over 1,000 lumens of brilliant white light to light upunder your awning, inside a tent, or anywhere else around the campsite. The 1.2m longLED strip is fitted inside a fabric strip with hook and loop backing allowing you to easilyattach it to tent poles or awning frames. Metal hooks are also fitted for alternativemounting options.
• The supply cord is 5m long with a waterproof in-line switch
• LED strip is IP67 waterproof• Includes carry bag
Supplied with carry bag
Ò Cat. Qty 1 + Qty 3 + Qty 6 + Cool White ST-3950 $ 99.95 $ 89.95 $ 79.95
Specifications ST-3950Rating IP67 WaterproofInput 12VDCInput current 1.0AColour Cool white, 5500KLumens 1200LEDs 72 x 5050SMDSwitch Waterproof in-line switchCord length 5mDimensions 1350(L) x 50(W) x 7(H)mm
Workbench sent to us by: David Jaycar Store: Modbury Laser testing colloidal silver samples from my custom designed CS generator builtfrom many Jaycar components.
There are plenty of Jaycar products on my workbench from tools, test gear, solderingiron, hot glue gun to component drawers, magnifying lamp and wire and cable.
The lasers are 2 x HeNe 633nm industrial gas tubes and 1 x 532nm green laserdiode.
For more details, visit:www.jaycar.com.au/workbench
Ultra Bright Flexible Adhesive LED Strip Lights
These flexible adhesive LED strips are made using the highest brightness 5060-SMDtype LEDs, and feature 60 of these LEDs per metre of stripping. Each strip comes as a5m length, which can be broken down into individual 5cm sections with 3x LEDs thatcan be individually soldered to apply power. We understand that not all applicationsrequire a full 5m length, so we cut them to length and sell by the 5cm section, so thatyou can get the exact length you require.The strip itself is a flexible circuit board,backed with quality 3M brand adhesive tapeto ensure a long term adhesion to yourmounting surface. Powered by 12VDC.Two types available:
Note: Compatible with our AluminiumChannel System HH-8547, HH-8548 & HH-8549
Ò Price per Cat. Qty 1 + 1 Metre 5 Metres Cool White 50mm segment ZD-0570 $ 2.95 $ 43.00 $ 145.00 Warm White 50mm segment ZD-0572 $ 2.95 $ 43.00 $ 145.00
Specifications ZD-0570 ZD-0572Voltage 12VDC 12VDCColour Cool white Warm WhiteCurrent per section 50mA 50mACurrent per metre 1000mA 1000mALumens per metre 1200 1200LEDs per section 3 x 5060 3 x 5060Sections per metre 20 20Dimension per section 50x10mm 50x10mm
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
55 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Ecolume Mains 15W Downlight Kit - 240VAC A more energy efficient solution to halogen or CFL downlights, this 100mm LEDdownlight is powered by 6 x Osram® Oslon Square EC, featuring the latest in efficientLED technology from Osram. The result is a phenomenally bright light output; evenhigher than a 55W halogen, with over 800 lumens of light produced! Besides thesignificant power savings (over 75%!) we should also highlight that being LED, the 15WEcolume downlight operates atsignificantly lower temperatures with noultraviolet and carbon emissions, and willprovide 50,000 hours plus of service life.
Supplied with a dimmable LED driver(Clipsal® trailing edge recommended) andthe adjustable gimbal housing finished inwhite colour.
Truly a high quality product with outstandingperformance, we are giving this a 3 year replacementwarranty.
LED downlights have a lot of benefits over their traditional halogencounterparts, the biggest of which are their significantly lowerpower consumption (around 70 - 90% less), longer life expectancy(50,000 vs 2,000 hours) and significantly lower heat generation.
Installation is generally easy for both new applications andretrofitting of globes.
See our website for full details and specifications.
13W LED Downlight with Remote Controlled Colour Temp & Brightness Kit - 240VAC These high lumen output, energy efficient LED Downlights are economical, environmentally friendly, and most importantly, user friendly. EachLED Downlight is rated to a low 13W but can produce an impressive output of up to 850 lumens. Each is supplied with a driver and a mainslead all already pre-terminated to each component when supplied. They are also controlled by remote, which allows you to control; Thecolour temperature from Warm White to Cool White to Daylight White, the brightness output from 100% down to 20% and to switch thepower on or off. The remote control has four channels that allows you to pair off groups, each channel can pair up to 10 downlights,allowing a maximum system of 40 downlights paired on to 1 remote. Each system can be controlled by up to 6 remotes as well.You can also add some Wi-Fi connectivity to this Remote Controlled Downlight System with the Wi-Fi Control Box (SL-2338). When paired to the Wi-Fi Control Box, you can download a free app on your iOS® or Android® Smartphone or Tablet, and have a virtual remote control on your hand held device. These 13W LED Downlights is available in three designs, a Gymbal mount with a flushed surface, a Recessed surface and a Flush surface. All models made in die-cast aluminium for added durability. Ideal for both domestic and workplace applications.
GYMBAL MOUNTED DOWNLIGHT WITH REMOTE CONTROL KIT - SL-2330Included: Downlight, Driver, Mains lead, RF Remote Control
GYMBAL MOUNT - SL-2332Includes: Downlight, Driver, Mains lead
RECESSED SURFACE - SL-2334Includes: Downlight, Driver, Mains lead
FLUSH MOUNT - SL-2336Included: Downlight, Driver, Mains lead
WI-FI CONTROL BOX - SL-2338• Power: USB, 5V• iOS® and Android® Free App available
RF REMOTE CONTROL - SL-2339• Power: 2 x AAA batteries included• Signal: 2.4GHz • Control Distance: 30m
8W Dimmable LED Downlight Kits - 240VAC A true replacement for a 50W halogendownlight. Featuring the same remotephosphor technology used in all ViribrightLED lighting products, they offer excellentlight output, efficiency, a wide beamoutput and high colour rendering for true colour illumination. Fullydimmable with traditional electronic light dimmers or our LEDdimmer PS-4084, suitable for a ceiling cut out of 75-92mmand supplied with a 2-pin mains lead. Fantastic for DIYreplacement of existing halogen downlights, or a totally newinstallation. Powered directly by 240VAC so there is no needfor external LED drivers. Fully approved for electrical safety andeven approved for the NSW 'ESS' and Victoria 'VEET' commerciallighting energy saving schemes (electricians take note!).
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
56 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
Electronic Transformers for LED LightsThese electronic transformers are designed to be used with LED lighting products thattake a 12V power source, for example our LED MR16 replacement globes, and providethe same kind of efficient power delivery and compact size as a normal electronictransformer. Electronic transformers that are intended for use with halogendownlights are not suitable for use with LED-replacement lightingproducts, since using them often causes flickering anddramatically reduces the life expectancy of the LEDlight. They deliver a constant 12VDC and featureshort circuit, over temperature, over load andspike protection. Suitable for domestic andcommercial applications, they are perfect forcombining with our LED MR16 globes toreplace those power-hungry halogendownlights.
Specifications ZD-0621Power consumption 6WLED(s) COBPower per LED 6WBrightness 530 lumensColour Warm whiteInput voltage 12VAC/DCLens angle 60°Fitting MR16Dimensions (dia x L) 50 x 45mm
MR16 6W COB LED Downlight - 12VAC/DC High quality MR16 low-voltage LED downlight globes featuring a "chip-on-board"(COB) 6W COB LED module that produces over 500 lumens of brilliant light, makingthem a true halogen replacement, providing equivalent or better light output! Built in acold forged aluminium housing, heat dissipation is far superior to most LED downlightglobes; ensuring you get the full 30,000+ hour life expectancy. If saving power andlasting a lifetime weren’t enough, they are also dimmable!
• To power use MP-3209 PWM 12VDC dimmer and a suitable 12VDC power supply
Ò Lumens Colour Cat. Qty 1 + 530 Warm White ZD-0621 $ 24.95
GU10 LED Mains Voltage Downlight Kits - 240VAC Simply cut a hole and drop them in, or replace your existing halogen downlights. Mainspowered, so no additional power supplies, transformers or ballasts required, just getan electrician to wire them straight in to 240VAC. Being LED rather than halogen, theyuse 1/10th the power, last over 50,000 hours, or over 20 years if run for 6 hours perday! The GU10 LED lamps supplied with each kitfeature three Cree® XP-G LEDs, running at 2Weach to produce a light output equivalentto a 30W halogen globe. Each assemblyincludes a junction box and spring clips tomount to any surface up to 25mm thick. White or warm white colour temperature, sold in a single kit or a pack of four.
• Cut-out: 90mm• Length: 63mm• Light output: White 450 lumens, warm white 350 lumens• Dimmable (with regular trailing or leading edge dimmers)
Ò Cat. Qty 1 + Qty 3 + Qty 6 + 3 x 2W Warm White 1 Pack ST-3897 $ 9.95 $ 7.50 $ 6.25 3 x 2W Warm White 4 Pack ST-3899 $ 36.95 $ 30.00 $ 25.00
LED DOWNLIGHT KITS - 240VAC (CONTINUED)
GU10 6W COB LED Downlights - 240VAC The latest in high performance and high efficiency LED light sources with "chip-on-board" (COB), where multiple LED emitters are built into the one module. These highquality MR16 low-voltage LED downlight globes feature a Shineon 6W COB LED modulethat produces over 500 lumens of brilliant light. With such a bright output, these globesare a TRUE halogen replacement, providing equivalent or better light output! Built in acold forged aluminium housing, heat dissipation is far superior to most LED downlightglobes; ensuring you get the full 30,000+ hour life expectancy.
If saving power and lasting a lifetime weren't enough, they are also dimmable!
• Use a standard triac dimmer (Clipsal® trailing edge recommended).
Two models available:
Ò Lumens Colour Angle Cat. Qty 1 + 550 Cool White 60° ZD-0625 $ 24.95 530 Warm White 60° ZD-0626 $ 24.95
Specifications ZD-0625 ZD-0626Power consumption 6W 6WFitting GU10 GU10Colour Cool white Warm whiteColour temp 5500K 3000KLED type 6W COB 6W COBBrightness 550 lumens 530 lumensInput voltage 240VAC 240VACLens angle 60° 60°Dimensions 50(D) x 57(H)mm 50(D) x 57(H)mm
GU10 REPLACEMENT LED LAMPS 240VAC
G4 LED REPLACEMENT LAMPS - 12VAC/DC
MR11 LED Replacement Light 15x2835 LEDs 120° - 12VAC/DC High brightness MR11 LED globes commonly used for lighting caravan and marineinteriors, some desk lamps, and also used in retail shop display cabinets. High lumenlevel, available in cool and warm white.
G4 LED Replacement Light, 120° - 12VAC/DC An easy replacement for a G4 2-pin type halogen globe that uses significantly lesspower, and lasts a much longer. Great for benchtop lighting, reading lamps, and awhole host of other applications.
G4 LED Replacement Lights, 360° - 12VAC/DC When a full 360 degree light output is requiredfrom your G4 type globe, such as a garden light orlamp, these are the LED solution to save youpower.
G4 LED Waterproof Globes - 12VDC Low wattage replacement G4 LED lampssuitable for use in recreational vehicles.Completely encapsulated in resin, making them waterproof.
240V Mains LED Light Globes A range of mains LED light globes that are a true replacement for traditional lighting, offering brilliantlumen performance with wide, evenly spread light. Unlike many other types on the market with only180° light angle, these lights have a truly even light output across a 270° output angle, making thembetter than traditional light globes in many cases.
• Available in warm white, natural white and cool white colours• Bayonet or screw cap• 5W, 8W or 10W• All models having a colour rendering index above 80• All models are also dimmable with standard leading or trailing edge light dimmers, or you can use
the Viribright dimmer switch, PS-4084. • Typical payback period is just 9-12 months - see our online calculator to see how much you can save!
SL-2211 SL-2235
18W PAR38 Outdoor LED Spotlight Globes Finally an energy efficient alternative to power hungry outdoor halogen spotlights, thatdoesn’t take several minutes to "warm up" like a compact fluoro! Using just 18W ofpower, and producing over 1,300 lumens of light, these globes are a DIRECT replacementfor the 150W halogen globes found in outdoor spotlights and driveway sensor lights.
• IP55 rated• Available in warm, natural and cool white
colour temperatures• E27 Edison screw base.
T8 LED Fluoro Replacement Tubes Power consumption is more and more a focus these days with power bills everincreasing and with traditional T8 type fluoro tubes being one of the most commonlighting sources in use, they are an easy target for reducing power bills bothdomestically and commercially. These LED T8 fluoro replacement tubes offer equivalentlight output to a typical T8 fluorescent tube, but with half the power consumption,none of the annoying flicker, and often an increase in life expectancy. The upgrade is sosimple with no rewiring required in most cases*; just remove the old fluoro tube andstarter, and replace with the Viribright LED tube and starter (fuse). These are a "singleside" powered tube that do not have a metal back, so are completely safe (unlike sometubes) and even have Australian electrical safety approval certificates.
• Available in 2 foot and 4 foot lengths, in either natural white or cool white colour.
* NOTE: Not compatible with electronic ballasts. Light fitting needs re-wiring if fittedwith an electronic ballast.
For volume enquiries, please contact our Techstore for a quotation. Wholesale enquiriesalso welcome.
2,600 Lumens 240V IP65 180 LED Light FixtureThis 240V LED light fixture is an ideal replacement for atraditional fluorescent light. It is energy efficient andproduces a very bright 2,600 lumens. It is weatherproof anddustproof with its IP65 rating so it is suitable for both indoorand outdoor applications. Comes with mounting bracket anda 1.8m length of lead with mains plug.
Freecall Order Hotline: 1800 022 888 Prices in Australian dollars
58 Back to
MenuMAIN
BATTERIES &ACCESSORIES
SOLAR
INVERTERS
LABORATORYPOWER SUPPLIES
CAR POWER SUPPLIES
OPEN FRAMESWITCHMODES
AC ADAPTORS& PLUGPACKS
MAINS POWERHARDWARE
TRAVELADAPTORS
POWER LEADS& ADAPTORS
POWERBOARDS
CONSUMERBATTERIES
LED STRIP &DOWN LIGHTING
SPECIALTYGLOBES
BATTERYCHARGERS
LED Replacement Lamp for 2D Fluoros in Caravans One of the most common lights used in caravans upuntil quite recently, is the 16W 2D fluoro. The problemwith these is not only do they draw a lot of power forthe light they produce, but they also blow veryfrequently, take a long time to "warm up", and theyaren’t very pleasant on the eye. This LED replacementlamp solves all that! The circular shape metal core PCBis backed with the same moulding as a normal 2Dfluoro, so it fits into the same light socket - all you haveto do is bypass the fluoro ballast and supply the lampwith 12VDC directly. No need to carry spare globes asthe LED lamp is impervious to vibrations, and the LEDsare rated to last over 50,000 hours.
Ò Cat. Qty 1 + Qty 5 + Qty 10 + Cool White ZD-0670 $ 29.95 $ 26.95 $ 23.70
Specifications ZD-0670Input voltage 12VDCPower 9WLumens 900Beam 180ºLED type 60x2835 SMDDimensions 150(Dia.)mm
Fluorescent Tube Adaptors T5-T8
Easily convert traditional T8 fluorescent lighting to more energy efficient T5 series tubesusing these tube adaptor sets. T5 tubes output the same light level as standard T8 tubeswhile consuming up to 40% less power. By comparison, LED replacements forfluorescent lights use similar power, and/or produce less light, and cost SEVERAL timesmore.
While many LED lighting options are available, we have specifically rejected LED fluororeplacements and chosen to sell these converters due to price, convenience and safety.Many LED tubes are known fail prematurely, with the electronics being poor quality, andthe LEDs themselves being irregular in colour. Currently there are no mandatoryelectrical safety requirements for LED fluoro tube replacements and many common LEDtube varieties pose a real electrocution hazard! By contrast T5 tubes are reliable andreadily available in a brand name at a low cost, and are very safe; with these T8-T5adaptors being approved by electrical safety standards. Lets not also forget thefrightfully high cost of LED fluoro replacement tubes!
With T8 tubes commonly found in large area lighting systems for offices, schools, smallbusinesses and warehouses the savings achieved using these adaptors adds up veryquickly.
Installation couldn't be more simple - just remove the old T8 tube and starter, replacewith the supplied starter-fuse, attach the two adaptor ends to your new T5 tube, installas per usual, and enjoy the power savings!
NOTE: Not suitable in T8 fittings with electronic ballasts.
Two models available:SL-2746 for replacing 20W 590mm (2ft) T8 tubes with 14W T5 tubesSL-2748 for replacing 40W 1200mm (4ft) T8 tubes with 28W T5 tubes
Bakelite Globe HolderHigh quality MES globe holder with a round bakelite base.
• Wires are attached to the socket by screws. • No soldering required. • Holder can easily be screwed to a base plate. • Diameter 33mm / Height 19mm.• Suits SL-2654/6• Ideal as a simple pilot lamp
50mm Halogen Downlight HolderInstall your own halogen lamps in the ceiling with this holder.Simply drill a hole and this fitting pushes in and is held withclips. The halogen globe then pushes into the holder.
• Colour is white, complete with lamp base. • For 51mm. Approx cutout is 60-65mm. • Dimensions - total width at front 75mm. Depth 55mm.
LED INFORMATIONPower supply requirements for LED lamps or lighting modules, such as our MR16 LEDdownlight replacement globes, can vary considerably and it is essential that a suitablepower supply is used. Switchmode transformers, or "electronic transformers" that aredesigned to run halogen lights, should not be used with LED lighting modules or lampsunless they are specifically certified to do so. LED lamps are compatible with all typesof magnetic (linear) transformers, but not all types of switchmode transformers. Mosthalogen lamp switchmode transformers require a minimum load to function correctly &output a high frequency pulse train based on the load requirements. As LED lamps draw a fraction of the current of an equivalent halogen lamp (typically~1/10th), this usually results in problems such as flickering, strobing, or in some cases,no light at all. It may also reduce the life expectancy of the LED lamp. It is essential themaximum input voltage of the LED lamp or module is not exceeded and the powersupply can deliver the necessary current required in a linear manner. If usingswitchmode or electronic power supplies, make sure they are designed for use withLED lamps, otherwise use a linear power supply or a DC output power supply.
2.2V 470mA • Suitable for 2 x AA batteries Cat. SL-3200 2.4V 520mA • Suitable for 2 x C batteries Cat. SL-32022.4V 700mA • Suitable for 2 x D batteries Cat. SL-32042.4V 700mA • Suitable for 3 x D batteries Cat. SL-32064.8V 750mA • Suitable for 4 x D batteries / Lantern Cat. SL-3208
Krypton globes give up to 70% more light outputcompared to standard globes.
Ò Cat. Qty 1 + Qty 10 + Qty 25 +Pkt 2 All Types $ 2.95 $ 2.60 $ 2.30
2.5V Krypton Torch Globe - MES• 300mA• Suitable for 2 x 1.5V batteries• Miniature Edison Screw
HANDLING HALOGEN GLOBESDue to the high temperature of the halogen globes theglass envelope can crack unless it is very clean. If youleave grease or fingerprints on the globe, clean the glasswith methylated spirits (preferably) before using.
Workbench sent by: Radan - Jaycar Stockist: Nowra Electronics - Nowra My workshed! Pretty much everything in it is salvaged from scrap or 2nd hand or bargain purchases. Took me a fewyears to get it this far.
For more details, visit:www.jaycar.com.au/workbench