Mail Services
Mail Services
Mail Services Three major mail services:
Simple Mail Transfer Protocol SMTP
Post Office Protocol POP3
Internet Mail Access Protocol IMAP or IMAP4
Which one to use? Outbound Mail
SMTP for outbound email Port 25 or 2525
Inbound Mail POP3 for inbound email
Port 110
IMAP for inbound email Port 143
What is SMTP? Simple Mail Transfer Protocol (SMTP) is the
standard protocol for sending emails across the Internet. SMTP uses TCP port 25 or 2525 Sometimes you may have problems sending messages
ISP may have closed port 25 To determine the SMTP server for a given domain name
MX (Mail eXchange) DNS record is used
IMAP or POP3? Both receive email Main differences between IMAP and POP3:
POP3 protocol assumes there is only one client connected to the mailbox
IMAP protocol allows simultaneous access by multiple clients IMAP is suitable if the mailbox is used by multiple
users
SMTPMaterial from:
http://en.wikipedia.org/wiki/Smtp
SMTP Simple Mail Transfer Protocol
The de facto standard for e-mail transmissions across the Internet.
Defined in RFC 821 (STD 10) amended by RFC 1123 (STD 3) chapter 5.
The protocol used today is also known as ESMTP Defined in RFC 2821.
SMTP Relatively simple text-based protocol
One or more recipients of a message are specified In most cases verified to exist
The message text is transferred Client-server protocol
The client transmits an email message to the server Either
an end-user's email client, a.k.a. MUA (Mail User Agent), - or -
a relaying server's MTA (Mail Transfer Agents) can act as an SMTP client.
SMTP An email client knows the outgoing mail SMTP server from
its configuration A relaying server typically determines which SMTP server
to connect to by looking up the MX (Mail eXchange) DNS record for each recipient's domain name The part of the email address to the right of the at (@) sign
Conformant MTAs (not all) fall back to a simple A record in the case of no MX A Record: address record
Some current mail transfer agents will also use SRV records SRV Records: SeRVice records More general form of MX, These are not widely adopted.
Relaying servers can also be configured to use a smart host
SMTP The SMTP client initiates a TCP connection
to the server's port 25 unless overridden by configuration
It is quite easy to test an SMTP server using the telnet program see following example
SMTP SMTP is a "push" protocol that does not
allow one to "pull" messages from a remote server on demand That is it sends only
To do a pull (i.e. receive) a mail client must use POP3 or IMAP
Another SMTP server can trigger a delivery in SMTP using ETRN
Outgoing mail SMTP server
An email client requires the name or the IP address of an SMTP server as part of its configuration
Server will deliver messages on behalf of the user Setting allows for various policies and network designs End users connected to the Internet can use the services of an
e-mail provider that is not necessarily the same as their connection provider
Network topology, or the location of a client within a network or outside of a network, is no longer a limiting factor for email submission or delivery
Modern SMTP servers typically use a client's credentials (authentication) rather than a client's location (IP address), to determine whether it is eligible to relay email.
Outgoing mail SMTP server
Another choice is whether to use TCP port 25 (SMTP) or port 587 (Submission), as established by RFC 2476, for relaying outbound mail to a mail server. Many servers support both.
Some servers still support port 465 for legacy secure SMTP It is preferable to use encryption on standard ports according to
RFC 2487. Some servers are setup to reject all relaying on port 25
Valid users authenticating on port 587 are allowed to relay mail to any valid address.
A server that relays all email for all destinations for all clients connecting to port 25 is known as an open relay Generally considered a bad practice worthy of blacklisting.
Sample communications
After establishing a connection between the sender (the client) and the receiver (the server), the following page shows a legal SMTP session. In the following conversation, everything sent by the
client is prefaced with C: and everything sent by the server is prefaced with S:.
On most computer systems, a connection can be established using the telnet command on the client machine, for example: telnet www.example.com 25 Opens a TCP connection from the sending machine to the MTA
listening on port 25 on host www.example.com.
Sample communicationsS: 220 www.example.com ESMTP Postfix S: 220 www.example.com ESMTP Postfix C: HELO mydomain.com C: HELO mydomain.com S: 250 Hello mydomain.com S: 250 Hello mydomain.com C: MAIL FROM:<[email protected]> C: MAIL FROM:<[email protected]> S: 250 Ok S: 250 Ok C: RCPT TO:<[email protected]> C: RCPT TO:<[email protected]> S: 250 Ok S: 250 Ok C: DATA C: DATA S: 354 End data with <CR><LF>.<CR><LF> S: 354 End data with <CR><LF>.<CR><LF> C: Subject: test message C: Subject: test message C: From: [email protected] C: From: [email protected] C: To: [email protected] C: To: [email protected] C: C: C: Hello, C: Hello, C: This is a test. C: This is a test. C: Goodbye. C: Goodbye. C: . C: . S: 250 Ok: queued as 12345 S: 250 Ok: queued as 12345 C: QUIT C: QUIT S: 221 ByeS: 221 Bye
Sample communications
Note: the data the client sends in the HELO and MAIL FROM commands can be retrieved in additional headers that the server adds to the message: Received and Return-Path respectively.
Optional: (and not shown above) nearly all clients ask the server which SMTP extensions the server supports Uses the EHLO greeting to invoke Extended SMTP
(ESMTP). These clients use HELO only if the server does not
respond to EHLO.
Sample communications
Contemporary clients will use the ESMTP extension keyword SIZE to inquire of the server the maximum message size that will be accepted.
Older clients and servers Try to transfer huge messages that will be
rejected After wasting the network resources Including a lot of connect time to dialup ISPs
paid by the minute.
Sample communications
For the edit planning of giant files or sending with older clients, users can manually determine in advance the maximum size accepted by ESMTP servers. The user telnets as above, but substitutes "EHLO mydomain.com" for the
HELO command line: S: 220-serverdomain.com ESMTP {postfix version and
date} S: 220 NO UCE. {etc., terms of service} C: EHLO mydomain.com S: 250-serverdomain.com Hello mydomain.com [127.0.0.1] S: 250-SIZE 14680064 S: 250-PIPELINING S: 250 HELP
This serverdomain.com declares that it will accept a fixed maximum message size no larger than 14,680,064 octets (8-bit bytes).
Depending on the server's actual resource usage, it may be currently unable to accept a message this large.
Sample communications
In the simplest case, an ESMTP server will declare a maximum SIZE with only the EHLO user interaction.
If no number appears after the SIZE keyword, or if the current message limit must be exactly determined: User can further interact by simulating the ESMTP header
of a message with an estimated size. See External Link RFC 1870
POP
From:
http://en.wikipedia.org/wiki/Post_Office_Protocol
POP Local e-mail clients use the Post Office Protocol
version 3 (POP3) An application-layer Internet standard protocol Retrieves e-mail from a remote server over a TCP/IP
connection Many subscribers to individual
Internet service provider e-mail accounts access their e-mail with client software that uses POP3.
POP Overview POP3 has made earlier versions of the
protocol obsolete POP (informally called POP1 and POP2) Now, the term POP almost always means POP3
in the context of e-mail protocols
POP Overview The design of POP3 and its procedures supports end-
users with intermittent connections (such as dial-up connections) Allows users to retrieve e-mail when connected View and manipulate the retrieved messages without
needing to stay connected Although most clients have an option to leave mail
on server, e-mail clients using POP3 generally: Connect Retrieve all messages Store them on the user's PC as new messages Delete them from the server Disconnect.
POP Overview In contrast, the newer, more capable
Internet Message Access Protocol (IMAP) supports both connected and disconnected modes of operation. E-mail clients using IMAP generally leave messages on
the server until the user explicitly deletes them. This and other facets of IMAP operation allow
multiple clients to access the same mailbox
POP Overview Most e-mail clients support either POP3 or IMAP to retrieve
messages Few Internet Service Providers (ISPs) support IMAP
The fundamental difference between POP3 and IMAP4: POP3 offers access to a mail drop
Mail exists on the server until it is collected by the client If the client leaves some or all messages on the server The client's message store is considered authoritative
In contrast, IMAP4 offers access to the mail store The client may store local copies of the messages These are considered to be a temporary cache The server's store is authoritative
POP Overview Clients with a leave mail on server option generally use the POP3 UIDL (Unique
IDentification Listing) command. Most POP3 commands identify specific messages by their ordinal number on the mail server. Creates a problem for a client intending to leave messages on the server Message numbers may change from one connection to the server to another For example if a mailbox contains five messages at last connect, and a different client then
deletes message #3, the next connecting user will find the last two messages' numbers decremented by one
UIDL provides a mechanism to avoid these numbering issues. Server assigns a string of characters as a permanent and unique ID for the message When a POP3-compatible e-mail client connects to the server, it can use the UIDL command
to get the current mapping from these message IDs to the ordinal message numbers The client can then use this mapping to determine which messages it has yet to download
Saves time when downloading Note: IMAP has a similar mechanism, using a 32-bit UID (Unique IDentifier) that is required to be strictly ascending.
The advantage of the numeric UID is with large mailboxes A client can request just the UIDs greater than its previously stored "highest UID"
In POP, the client must fetch the entire UIDL map
POP Overview Whether using POP3 or IMAP to retrieve messages:
E-mail clients typically use the SMTP_Submit profile of the SMTP protocol to send messages
E-mail clients are commonly categorized as either POP or IMAP clients, but in both cases the clients also use SMTP
There are extensions to POP3 that allow some clients to transmit outbound mail via POP3 Known as "XTND XMIT" extensions. The Qualcomm qpopper and CommuniGate Pro servers and Eudora clients are
examples of systems that optionally utilize the XTND XMIT methods of authenticated client-to-server e-mail transmission.
MIME serves as the standard for attachments and non-ASCII text in e-mail Although neither POP3 nor SMTP require MIME-formatted e-mail,
essentially all Internet e-mail comes MIME-formatted POP clients must also understand and use MIME IMAP, by design, assumes MIME-formatted e-mail
POP Overview POP3 originally supported only an unencrypted login mechanism
Although plain text transmission of passwords in POP3 still commonly occurs, POP3 currently supports several authentication methods to provide varying levels of protection against illegitimate access to a user's e-mail One such method, APOP, uses the MD5 hash function in an attempt to avoid
replay attacks and disclosure of the shared secret Clients implementing APOP include Mozilla Thunderbird, Opera, Eudora, KMail
and Novell Evolution POP3 clients can also support SASL authentication methods via the AUTH
extension. MIT Project Athena also produced a Kerberized version POP3 works over a TCP/IP connection using TCP on network port 110
E-mail clients can encrypt POP3 traffic using TLS or SSL A TLS or SSL connection is negotiated using the STLS command Some clients and servers, like Google Gmail, instead use the deprecated
alternate-port method, which uses TCP port 995
POP Example (APOP)S: <wait for connection on TCP port 110> C: <open connection> S: +OK POP3 server ready <[email protected]> C: APOP mrose c4c9334bac560ecc979e58001b3e22fb S: +OK mrose's maildrop has 2 messages (320 octets) C: STAT S: +OK 2 320 C: LIST S: +OK 2 messages (320 octets) S: 1 120 S: 2 200 S: . C: RETR 1 S: +OK 120 octets S: <the POP3 server sends message 1> S: . C: DELE 1 S: +OK message 1 deleted C: RETR 2 S: +OK 200 octets S: <the POP3 server sends message 2> S: . C: DELE 2 S: +OK message 2 deleted C: QUIT S: +OK dewey POP3 server signing off (maildrop empty) C: <close connection> S: <wait for next connection>
POP Example POP3 servers without the optional APOP
command expect you to log in with the USER and PASS commands:
C: USER mrose S: +OK User accepted C: PASS mrosepass S: +OK Pass accepted
IMAP
IMAP Internet Message Access Protocol
Commonly known as IMAP or IMAP4 An application layer Internet protocol
Operates on port 143 Allows a local client to access e-mail on a remote server
Previously called Internet Mail Access Protocol, Interactive Mail Access Protocol (RFC 1064), and Interim Mail Access Protocol)
Current version is IMAP version 4 revision 1 IMAP4rev1: defined by RFC 3501
IMAP4 and POP3 are the two most prevalent Internet standard protocols for e-mail retrieval
Virtually all modern e-mail clients and servers support both
IMAP IMAP supports both connected and disconnected modes of
operation. E-mail clients using IMAP generally leave messages on the
server until the user explicitly deletes them. This and other facets of IMAP operation allow multiple clients to
access the same mailbox. Most e-mail clients support either POP3 or IMAP
Fewer Internet Service Providers (ISPs) support IMAP. IMAP4 offers access to the mail store
the client may store local copies of the messages considered to be a temporary cache the server's store is authoritative.
IMAP E-mail messages are generally sent to an e-mail server
Stores received messages in the recipient's e-mail mailbox User later retrieves these messages with either a web browser or an e-mail
client that uses one of a number of e-mail retrieval protocols. Some clients and servers preferentially use vendor specific, typically
proprietary protocols, most support the Internet standard protocols SMTP for sending e-mail POP3 and IMAP4 for retrieving e-mail
Allows interoperability with other servers and clients Proprietary protocols:
Microsoft Outlook client when communicating with an Exchange server IBM Notes client when communicating with a Domino server Both products also support SMTP, POP3, and IMAP4.
Support for the Internet standard protocols Allows other e-mail clients to access these servers Allows the clients to be used with other servers E.g. Qualcomm's Eudora or Mozilla Thunderbird
IMAP E-mail clients can generally be configured to use either POP3 or IMAP4
to retrieve e-mail and in both cases use SMTP for sending. Most e-mail programs can also use Lightweight Directory Access Protocol
(LDAP) for directory services Many (if not most) subscribers to individual ISP e-mail accounts access
their e-mail with client software that uses POP3 IMAP is often used in large networks
For example, a college campus mail system. IMAP allows users to access new messages instantly on their computers
The mail is stored on the network With POP3, users either
download the e-mail to their computer access it via the web. Both methods take longer than IMAP User must either download any new mail or "refresh" the page to see the new
messages.
Advantages over POP3 Connected and disconnected modes of operation
When using POP3, clients typically connect to the e-mail server briefly, only as long as it takes to download new messages.
When using IMAP4, clients often stay connected as long as the user interface is active and download message content on demand.
For users with many or large messages, this IMAP4 usage pattern can result in faster response times.
Multiple clients simultaneously connected to the same mailbox The POP3 protocol requires the currently connected client to be the
only client connected to the mailbox. The IMAP protocol specifically allows simultaneous access by
multiple clients Provides mechanisms for clients to detect changes made to the mailbox
by other, concurrently connected, clients
Advantages over POP3 Access to MIME message parts and partial fetch
Nearly all internet e-mail is transmitted in MIME format, allowing messages to have a tree structure where the leaf nodes are any of a variety of single part content types and the non-leaf nodes are any of a variety of multipart types.
The IMAP4 protocol allows clients to separately retrieve any of the individual MIME parts and also to retrieve portions of either individual parts or the entire message.
These mechanisms allow clients to retrieve the text portion of a message without retrieving attached files or to stream content as it is being fetched.
Advantages over POP3 Message state information
flags (defined in the IMAP4 protocol clients) can keep track of message state for example whether or not the message has been read, replied to, or deleted
Flags are stored on the server Different clients accessing the same mailbox at different times can detect state changes made
by other clients POP3 provides no mechanism for clients to store such state information on the server
If a single user accesses a mailbox with two different POP3 clients State information, such as whether a message has been accessed, cannot be synchronized
between the clients The IMAP4 protocol supports both pre-defined system flags and client defined
keywords System flags indicate state information such as whether a message has been read.
Keywords, (not supported by all IMAP servers), allow messages to be given one or more tags whose meaning is up to the client
Adding user created tags to messages is an operation supported by some Webmail services, such as Gmail Generally not using IMAP.
Advantages over POP3 Multiple mailboxes on the server
IMAP4 clients can create, rename, and/or delete mailboxes (usually presented to the user as folders) on the server, and move messages between mailboxes.
Multiple mailbox support also allows servers to provide access to shared and public folders.
Server-side searches IMAP4 provides a mechanism for a client to ask the server to search for
messages meeting a variety of criteria Avoids requiring clients to download every message in the mailbox in
order to perform searches Built-in extension mechanism
IMAP4 defines an explicit mechanism by which it may be extended. Many extensions to the base protocol have been proposed and are in
common use. IMAP2bis did not have an extension mechanism POP3 now has one defined by RFC 2449.
Disadvantages of IMAP IMAP remedies many of the shortcomings of
POP Inherently introduces additional complexity
Much of this complexity (e.g., multiple clients accessing the same mailbox at the same time) is compensated for by server-side workarounds Maildir Database backends
Disadvantages of IMAP Unless the mail store and searching
algorithms on the server are carefully implemented, a client can potentially consume large amounts of server resources when searching massive mailboxes.
Disadvantages of IMAP IMAP4 clients need to explicitly request new email
message content Potentially causing additional delays on slow connections
such as those commonly used by mobile devices. A private proposal, push IMAP, would extend IMAP
to implement push e-mail by sending the entire message instead of just a notification.
However, push IMAP has not been generally accepted Current IETF work has addressed the problem in other
ways
Disadvantages of IMAP Unlike some proprietary protocols which combine sending
and retrieval operations, sending a message and saving a copy in a server-side folder with a base-level IMAP client requires transmitting the message content twice, once to SMTP for delivery and a second time to IMAP to store in a sent mail folder. Remedied by a set of extensions defined by the IETF LEMONADE
Working Group for mobile devices POP3 servers don't support server-side folders so clients have no
choice but to store sent items on the client. Many IMAP clients can be configured to store sent mail in a client-
side folder. Courier Mail Server offers a non-standard method of sending using
IMAP by copying an outgoing message to a dedicated outbox folder.
SMTP-AUTHSMTP Authentication
SMTP Authentication SMTP-AUTH
Extension of the Simple Mail Transfer Protocol (SMTP) Includes an authentication step
Client effectively logs in to the mail server during the process of sending mail
Servers which support SMTP-AUTH can usually be configured to require clients to use this extension, ensuring the true identity of the sender is known.
SMTP-AUTH is defined in RFC 2554.
SMTP Authentication SMTP-AUTH provides an access control
mechanism Can be used to allow legitimate users to relay
mail while denying relay service to unauthorized users, such as spammers
Does not guarantee the authenticity of either the SMTP envelope sender or the "From:" header. Spoofing, in which one sender masquerades as
someone else, is possible even with SMTP-AUTH.
SMTP Authentication SMTP-AUTH extension also allows one mail
server to indicate to another that the sender has been authenticated when relaying mail This requires the recipient server to trust the
sending server This aspect of SMTP-AUTH is rarely used on the
Internet.
The recipient of an e-mail message cannot tell whether the sender was authenticated Use of SMTP-AUTH is only a partial solution to spam.
SMTP Authentication
While SMTP-AUTH is generally a security improvement over unauthenticated SMTP, it can also introduce a weakness If authenticated users are allowed to submit messages
from IP addresses where unauthenticated users are not — that is, if authenticated users are allowed to relay mail — then an attacker who subverts one user's account is then able to use the authenticated server as an open mail relay. In such a configuration every user's password becomes a key to
the mail system's security. Spammers have attacked SMTP-AUTH mail servers by
bruteforcing common usernames and passwords A good password policy can effectively prevent such an
attack
Acronyms
Acronym summary ESMTP - Extended SMTP ETRN - Extended Turn IMAP - Internet Mail Access Protocol MTA- Mail Transfer Agents MUA - Mail User Agent MX - Mail eXchange POP - Post Office Protocol SMTP - Simple Mail Transfer Protocol UIDL - Unique IDentification Listing