Magic Bullet NutriBullet Power Cord Replacement Bullet NutriBullet Power Cord Replacement This guide instructs you on how to replace the power cord, which serves as a power supply
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Magic Bullet NutriBullet Power CordReplacement
This guide instructs you on how to replace the power cord, which serves as a power supply to theNutriBullet powerbase.
Since this guide replacement requires cutting wires, if you want to reassemble this device, you must firstre-solder new wires before following the steps backwards to reassemble the device.
This document was last generated on 2017-06-19 10:28:21 AM.
Step 5
After removing the gray base andsilver casing, the wires will now befree and you will have easy accessto them.
Gently pull out the two plasticcovers at the end of the wires.
Step 6
Use tape or clamps to hold the wirestogether for an easy solderingexperience.
Using a soldering iron, solder yournew wire to the red wire.