Maestro CV MODERN SINGLE GRAIN SEEDING TECHNOLOGY
Maestro CV
MODERN SINGLE GRAIN SEEDING TECHNOLOGY
Maestro CVMODERN SINGLE GRAIN SEEDING TECHNOLOGY
― Versatile single grain seeding technology for: maize, sunflowers, sugarbeet, soybeans, rape
― Simple handling of the metering device – no adjustment of the scraper required
― Solid and reliable technology – heavy parallelogram and row unit for highest strain
― Coulter pressure up to 350 kg for optimum sowing even in most difficult conditions
― Automatic, soil-dependent coulter pressure adaption AutoForce
― High hectare output due to long range for fertiliser and seed
― Compact unit with low demands on the tractor
Easily accessible Maestro single grain metering device
Different metering discs depending on the type of crop
The HORSCH Terminal shows the placement quality of each individual row on a real-time basis.
The new pneumatic singulation is absolutely precise.
Maestro CVWITH AIRVAC SYSTEM – PRECISE – VERSATILE
AirVac – the new generation of vacuum singulation
The AirVac metering device can be used universally for an exact grain singulation. Due to different metering discs, maize, sunflowers, sugarbeet, soybeans and rape can be singulated reliably.
The AirVac system is based on the principle of vacuum singulation where the seed is sucked to a perforated disc. During the metering process the accepted grains pass through a scraper that sees to it that doubles are removed. The special feature of the AirVac scraper is that the user does not have to carry out any adjustment works. The contour of the scraper has been optimised in such a way that a reliable singulation for all crops is guaranteed.
Via a fall tube the AirVac metering device leads the seed to the bottom of the furrow. A grain sensor is integrated into the fall tube to guarantee an optimum monitoring of the seeding success. The measuring technology of the sensor is able to count the grains, to determine the spacings between the grains and thus also to transmit an information to the driver with regard to double spots or gaps.
The transmitted values of the singulation accuracy are displayed clearly at the terminal of the machine and additionally increase safety while sowing.
The AirVac singulator is driven electrically as a standard and each row can be controlled individually. This technology co-operates with the well-proven functions single row switch-off, SectionControl, VariableRate and tramline control.
For VariableRate the AirVac system is designed in such a way that the seed rate can be modified for every single row. With the tramline control it is possible to individually adapt the seed rate in the row at the left and the right side of the tramline. With these advanced functions all measures to increase precising while sowing can be used to full capacity.
AirVac
― Can be used universally for different crops
― High precision for sowing speed up to 12 km/h
― Simple handling: no adjustment of the scraper required
― Electric drive as a basis for:
– SectionControl
– VariableRate
– Tramline control
Maestro CV road transport 8-row Maestro CV
Maestro CVTHE COMPACT MIDDLE CLASS
The compact Maestro CV unit that consists of a high-capacity seed wagon and a seed bar for a working width of up to 7.2 m provides high efficiency whereas the demands on the tractor are comparatively low.
To meet the requirements of the customers in an optimum was, two configurations of the seed wagon of the Maestro CV are available:
Single hopper for fertiliser
The hopper with a capacity of 3 000 liter is used for applying fertiliser via the coulters of the underground fertilisation system. In this case, the seed is supplied in the large single row boxes with a capacity of 70 liter.
Double hopper for fertiliser and seed
The new double hopper system MTS (Main Tank Supply) can store 3 000 liter of fertiliser and 800 liter of seed. By means of the MTS technology the seed is continuously transported to the individual row units and then singulated by the AirVac metering device. The huge advantage of MTS is the simple filling of the central seed hopper and the simultaneous singulation of the seed on the row with a short distance to the seed furrow.
The fertiliser hopper of both versions is equipped with the well-proven HORSCH metering technology and can reliably and precisely feed the underground fertilisation system of the Maestro.
The coulter attachment of the Maestro CV can be equipeed with 8-rows and 9-rows with a row spacing of 70 / 75 and 80 cm. When used with 12 rows the row spacings amount to 45 and 50 cm. In the future, the newly developed clamping profile will allow for an easy changeover from 12 to 8 rows.
The row body of the Maestro CV is equipped with a wide, solid parallelogram and a hydraulic cylinder to generate coulter pressure as a standard. Coulter pressures up to 350 kg per row can be adjusted manually at the terminal or fully automatically with the innovative coulter pressure regulation system HORSCH AutoForce. The weight of the seed wagon is used to generate coulter pressure over the whole width of the machine and thus, relieves the wheels of the seed wagon while sowing.
Maestro CV – in brief
― Precise and simple singulation with HORSCH AirVac
― Seed wagon with single hopper for fertiliser or double hopper with central seed tank
― MTS system in the compact middle class segment
― 8-, 9- and 12-row coulter attachment
― Row spacings between 45 and 80 cm
― Clamping profile to connect the row bodies
― Coulter pressure between 125 and 350 kg per row
– Can be adjusted comfortably at the terminal
– Or controlled automatically with HORSCH AutoForce
― Weight of the seed wagon is used to generate coulter pressure
― Underground fertilisation with SingleDisc fertiliser coulter
― Various tyre options
― Central micro-granular unit for placement in the furrow or on the row
― ISOBUS operation
AutoForceAUTOMATIC COULTER PRESSURE CONTROL
AutoForce – What do you need an automatic coulter pressure control for?
― Stony soils require more coulter pressure to place the seed at a consistent depth. If the coulter pressure is too low the coulter body would not move smoothly and the seed would germinate irregularly and with different speed.
― Lighter soils or more easily compacted soils require less coulter pressure to avoid a compaction of the soil. Too much coulter pressure compacts the soil and slows down the development of the roots although all seed was placed at the same depth.
― There rarely are fields that are regular. The coulter pressure should be adjusted for every section of the field.
― This is why HORSCH developed an automatic coulter pressure control system.
How does AutoForce work?
― There are 1, 2 or 4 sections over the whole working width of the machine.
― The system controls the pressure of the cylinders at the parallelogram and corrects the adjustments in such a way that the weight on the support wheels always remains the same. This is possible due to the design of the Maestro that allows for transferring weight to the seed bar.
― The coulter pressure then varies automatically between 125 kg and 300 kg.
WITH coulter pressure control system AutoForce WITHOUT coulter pressure control system AutoForce Closed seedbed furrow with standard rubber press wheels
Closed seedbed furrow with spike wheels
Closed seedbed furrow with finger press wheels
Press wheelsFOR A BETTER EMBEDDING OF THE GRAINS
Which press wheel is suitable for which use?
― The finger wheel is ideal for heavy soils.
― The spike wheel is ideal for lighter sites.
― The rubber closing wheels are ideal for light sandy sites.
― If the furrow wall gets compacted because of the double disc seed coulters, it is broken by the finger / spike wheel – the furrow is removed.
― Seed furrow is not opened after sowing under dry conditions, especially on heavy clayey sites
― Development of the maize root is encouraged
― There is one finger / spike wheel and one standard wheel per row to control the depth and to avoid moving the grains.
― However, the wheels are not suitable for shallow sowing.
Optimum pressure – optimum sowing depth Too much pressure –too much compaction
Too little pressure –too shallow sowing
Optimum pressure –optimum sowing depth
AutoForce pressure sensor: Weight recording is carried out via Piezo (pressure sensor) technology.
Details of the Piezo sensor
Seedbed furrow closed with standard press wheels
The standard press wheels keep up the consolidation
The spiked and the finger press wheels version breaks the consolidation that was generated by the depth control wheels.
The seed discs of the seed body open the seed furrow. Between the depth control wheels of the seed discs a little consolidation is created.
Finger wheel Spike wheel
Typ 1Typ 1 Typ 3Typ 2 Typ 3
MultiControl
When using a HORSCH Touch 800 / 1200 terminal you can also use the MultiControl function. If SectionControl is activated, MultiControl allows for switching on and off seed and fertiliser independently. If sowing is carried out in a site-specifi c way with VariableRate, MultiControl varies the quantity of fertiliser and seed independently. Without MultiControl, SectionControl allows for either switching on and off either seed or fertiliser at the right time respectively VariableRate allows for varying either seed or fertiliser.
HORSCH Intelligence
The machines of the future co-operate actively and HORSCH Intelligence allows for it. With intelligent software and electronic solutions HORSCH machines work even more effi ciently and help you to save money and nerves.
HORSCH technology is always equipped with ISOBUS standard. This does not only mean that every HORSCH machine can be controlled with any ISOBUS terminal. In addition, every HORSCH machine with a job computer can, as a standard, carry out functions like SectionControl, VariableRate or the order processing with the TaskController as soon as the necessary licences have been activated.
VariableRate
ISOBUS VariableRate allows for a site-specifi c application of seed and fertiliser. Thus, with an appropriate application card for every section within a fi eld the optimum quantity of fertiliser and seed can be applied.
Advantages of VariableRate
― Saving of seed and fertiliser as only the necessary quantity is applied
― Homogeneous emergence with an optimum number of grains/m²
― Simple and quick documentation– The different application rates are documented automatically.– Uncomplicated transmission to the acreage index
― Reduced stress for the driver– Fields are drilled or fertilised automatically with the optimum application rate
― Protection of the environment– Only the necessary amount of fertiliser is applied.
VariableRate also takes different typres of soil into consideration.
Type 1 Type 1Type 2 Type 3 Type 3
Touch 1200 Terminal
Soil quality Seed Fertilizer
high 300 kö/m2 2,8 dt/ha PK
medium high 270 kö/m2 2,5 dt/ha PK
medium low 250 kö/m2 2,3 dt/ha PK
low 220 kö/m2 2,0 dt/ha PK
Variable Rate: Seed OR Fertilizer
Variable Rate with MultiProduct: Seed AND Fertilizer
ELECTRONICS INNOVATIVE AND DIGITAL SOLUTIONS
TaskController
The ISOBUS TaskController allows for easily transferring data from the PC to the terminal. It also is possible to transfer and document seed rates, sown hectares and other data that were recorded while sowing from the terminal to the PC. This facilitates the administration of the acreage index. Orders can be created and worked off via the integrated order handling management.
Advantages of the TaskController
― Uncomplicated data exchange
― Automatic documentation
― Structured working due to data management
― Simple administration of the acreage index
― Simple accounting and proof for contract services
SectionControl
The ISOBUS SectionControl function allows for an automatic section control. The current position of the machine is deter-mined via GPS. At the fi eld boundaries, on the headlands or near obstacles, sections (individual row switch-off) or the whole working width are switched off automatically and thus overlapping is avoided.
Advantages of SectionControl
― Saving of seed and fertiliser as overlapping is reduced to a minimum.
― Constant working quality on the whole fi eld
― Productivity increase under various conditions (day and night, fog)
― Reduced stress for the driver
― Protection of the environment
WITHOUT SectionControl WITH SectionControl Variable Rate allows for applying site-specifi c quantities of fertiliser and seed by means of application maps.
VariableRateSeed OR fertiliser
VariableRate with MultiControlSeed AND fertiliser
Soil quality Seed Fertiliser
high 300 grains/m² 2.8 dt/ha PK
medium high 270 grains/m² 2.5 dt/ha PK
medium low 250 grains/m² 2.3 dt/ha PK
low 220 grains/m² 2.0 dt/ha PK
Terminals
HORSCH Terminal Touch 800 Terminal
Tyre: 710 / 50 R26.5 Tyre: 270 / 95 R36
Metering device micro-granular productOutlet micro-granular compound for slug pellets
SingleDisc fertiliser coulter Depth control wheels with scraper, adjustable press wheels and the catching roller which can be removed in extremely wet conditions.
EQUIPMENT
SectionControl Allows for an automatic switching off and on of the rows via GPS position signal. The GPS system is not part of the HORSCH Terminal.
Maestro CV
Optional trash wheels in front of the fertiliser coulters Trash wheels, floating with depth control Depth control wheel with spokes
The universal singulator does not have to be adjusted.Star seed ejection wheel Feed slide
* Weights of the machines with minimum equipment
TECHNICAL SPECIFICATIONS
HORSCH Maestro Maestro 8.X – 80 – 30” CV Maestro 9.X – 80 – 30” CV Maestro 12.45 – 50 CVTransport width (m) 3.00 3.00 3.00
Transport height (m) 3.90 3.90 3.90
Transport length (m) 6.50 6.50 6.50
Weight (kg)* 5 300 5 500 6 200
Hopper capacity seed waggon 3 000 3 000 3 000
Feed opening seed waggon (m) 1.00 x 2.40 1.00 x 2.40 1.00 x 2.40
Capacity seed container (l) 70 70 70
Number of rows 8 9 12
Coulter pressure hydr. (kg) 150 – 350 150 – 350 150 – 350
Depth control wheel Ø (cm) 40 40 40
Press wheel Ø (cm) 30 / 33 30 / 33 30 / 33
Catching roller Standard Standard Standard
Row spacing (cm, inch) 70 / 75 / 80 / 30” 70 / 75 / 80 / 30” 45 / 50
Sowing depth (cm) 1.5 – 9 1.5 – 9 1.5 – 9
Drop height seed (cm) 45 45 45
Working speed (km/h) 2 – 12 2 – 12 2 – 12
Horsepower requirement from (kW/hp) 110 / 150 118 / 160 132 / 180
Tyre size seed waggon (optional) 710 / 50 R 26.5 / Twin tyres 270 / 95 R 36 710 / 50 R 26.5 / 500 / 70 R 28.0 710 / 50 R 26.5 / Twin tyres 270 / 95 R 36
DA control devices 1 (+1 hydr. functions, +1 hydr. fan direct drive fertiliser with adjustable flow rate, +1 hydr. fan direct drive underpressure with adjustable flow rate and +1 hydr. filling auger single hopper)
Depressurized return flow (max. 5 bar) 1 (for hydr. fan direct drive fertiliser and underpressure)
Oil quantity hydr. fan underpressure (l) 30 (not with pto-shaft drive)
Oil quantity hydr. fan fertiliser (l) 28 (not with pto-shaft drive)
Current demand (A) 30 30 35
Adjustable drawbar linkage with ring hitch ball joint
Bolt Ø 32 or 42 mm Bolt Ø 32 or 42 mm Bolt Ø 32 or 42 mm
Adjustable drawbar linkage Bolt Ø 40 mm Bolt Ø 40 mm Bolt Ø 40 mm
Adjustable drawbar linkage hitch rotatable
Bolt Ø 50 mm Bolt Ø 50 mm Bolt Ø 50 mm
Ball-type linkage K 80 K 80 K 80
All
spec
ifica
tions
and
illu
stra
tions
are
app
roxi
mat
e an
d no
n-bi
ndin
g. T
echn
ical
feat
ures
and
des
ign
are
subj
ect t
o ch
ange
.EN
-90.
230.
309
(201
9.11
_ver
.01)
Your distributor:
Paper: 120 g/m2 Maxi Offset. The paper is certified according to the EU Ecolabel. This label is only granted for products and services whose environmental consequences are considerably lower than those of comparable products. For more details see www.eu-ecolabel.de. Printing ink: Printing ink QUICKFAST COFREE. Free from mineral oil and cobalt. Moreover, it is certified and recommend for printing according to the “Cradle-to-Cradle” principle (quasi “from the origin back to the origin”) – an approach that deals with the spreading of continuous and consequent recycling management. For more details see www.c2c-ev.de.
HORSCH Maschinen GmbHSitzenhof 192421 Schwandorf
Phone: +49 9431 7143-0Fax: +49 9431 7143-9200E-Mail: [email protected]