MADE TO ORDER FIBRE CABLES - City Electric Supply...Impact Punchdown Tool Terminal Block Part No. KPT4 All in one Punchdown Tool for use on KATT & Krone style jacks & patch panels,

The Power to Supply You...All Your Electrical Products

SAME DAY RANGEDATA & TELECOMS

Rack Wall Mount Data Cabinet 6RUPart No. CABRWM6RU-4-S

Fully assembled rack made from 1.0mm SPCC high quality cold roll steel with a powder coat finish, 600mm (W) x 450mm (D) x 370mm (H), includes 6-Way PDU, fixed shelf & cage nuts, designed & built to ANSI-310-D,IEC 297-2,DIN 41491/41494 standard.

24 Port Patch Panel Cat5EWith Removable ID

Part No. PP24C5E

24 Port Patch Panel with replaceable label strips, sturdy metal construction, conforms with EIA/TIA568A/B C5 standards, supplied with cage nuts, screws, washers & ties.

Cable Management BarR19 1 RU Black

Part No. PCM

Patch Cord Minder for 19 rack mount, for horizontal cable management 1RU, includes five jumper rings, black.

Cagenuts M6Black

Part No. CAGENUT-40

M6 Cage Nuts & Screws for mounting panels & equipment in 19 inch racks, black, quantity of 40 per pack.

Patch Leads Cat5E BlueCat5E Patch Leads made from 24AWG stranded bare copper wire with fully moulded strain relief boot, snagless connectors reduce accidental unplugging, RCM/A-Tick compliant, blue.

PL5EBL0.5 Patch Lead Cat5E Blue 0.5M

PL5EBL1 Patch Lead Cat5E Blue 1M

PL5EBL1.5 Patch Lead Cat5E Blue 1.5M

PL5EBL2 Patch Lead Cat5E Blue 2M

PL5EBL3 Patch Lead Cat5E Blue 3M

PL5EBL5 Patch Lead Cat5E Blue 5M

PL5EBL10 Patch Lead Cat5E Blue 10M

PL5EBL20 Patch Lead Cat5E Blue 20M

Patch Leads Cat6E BlueCat6 Patch Leads made from 24AWG stranded bare copper wire with fully moulded strain relief boot, snagless connectors reduce accidental unplugging, compliance: RCM/A-Tick (S008), TIA-568-C.2 Cat6, RoHS, blue.

PLC6BL0.5 Patch Lead Cat6 Blue 0.5M

PLC6BL1 Patch Lead Cat6 Blue 1M

PLC6BL1.5 Patch Lead Cat6 Blue 1.5M

PLC6BL2 Patch Lead Cat6 Blue 2M

PLC6BL3 Patch Lead Cat6 Blue 3M

PLC6BL5 Patch Lead Cat6 Blue 5M

PLC6BL10 Patch Lead Cat6 Blue 10M

PLC6BL20 Patch Lead Cat6 Blue 20M

24 Port Patch Panel Cat6With Removable ID

Part No. PC624P

24 Port Patch Panel with replaceable ID strips, rear cable management bar, wiring label for both 568A & 568B wiring formats, KATT style termination, includes cable ties, cage nuts, screws & washers.

MADE TO ORDERFIBRE CABLESManufactured here in Australia, our fully tested pre-terminated cables are made to your specific length, core count, colour and connector type.

All cable assemblies are performance tested to AS/NZS-3080/ISO-11801/ ANSI-568 and each cable is supplied with a test report.

CES can offer an end to end solution and a 25 year warranty with access to a full range of FOBOT’s, adaptors, patch leads and cut to length cable.

Ask your local CES store for more information.

ALWAYS IN STOCK AT YOUR LOCAL CES STOREwww.cityelectricsupply.com.au

The Power to Supply You...All Your Electrical Products

LAN Tester BNC/RJPart No. 35RJTST8

Primary use for testing continuity, shorts & open circuits, individual cables & pairs of unshielded twisted pair & shielded twisted pair cables, remote display unit allows for viewing at either end, displays pairs & crossed pairs, includes LEDs for each wire ensuring easy pin configuration.

Test PhonePart No. TP-9000

Butt Tester with 1 x 3-way socket & crocodile clips, Krone lead 2-way plug, small 6P-6P & long 6P-6P leads, DTMF keypad, last number redial (maximum of 32 digits), 10 number memory (maximum of 24 digits), 3 position volume switch.

Cat6 4 Pair Data Cable305M Box Blue305m Box of Blue Cat6 unshielded twisted pair (UTP) cable, 4 pair, PVC outer sheath.

Cat5E 4 Pair Data Cable305M Box Blue

Main Distribution Frame 20 Pair

305m Box of Blue Cat5E unshielded twisted pair (UTP) cable, 4 pair, PVC outer sheath.

Part No. MDF

20 Pair Main Distribution Frame for internal use beyond the network boundary - up to 30 pair capacity, includes 2 x DMP10 10 pair modules with room for 1 more, shallow lid does not allow overvoltage protection magazines, KATT style terminations.

Pro Cable Tie19mm x 25M Black Roll

Part No. VT19BK/25M

Pro Cable Tie 19mm x 25Mtr Black Roll, hook & loop tape to bundle unshielded twisted pair cable or bind to cable support, cut to length onsite, reusable, gives gentle cable support - does not disturb the unshielded twisted pair lay.

Final Distribution Point 20 PairPart No. FDP

20 Pair Final Distribution Point for use beyond the network boundary, up to 30 pair capacity, includes 2 x DMP10 10 pair modules with room for 1 more, shallow lid does not allow overvoltage protection magazines, KATT style terminations.

ALWAYS IN STOCK AT YOUR LOCAL CES STOREwww.cityelectricsupply.com.au

SAME DAY RANGEDATA & TELECOMS

Data Crimp ToolPart No. 06CT468-1

Data Wire StripperPart No. KDAT

Designed to crimp telecommunications approved, moisture resistant connectors, crimps grease filled UR, UY & UG connectors, uses parallel crimp action to ensure correct splicing.

Cable Tracer Tone GeneratorPart No. T180

Both a Tone Generator & Receiver supplied with crocodile clips or RJ, continuity tester, not for live circuits, suitable for data/dead electrical circuit, maximum possible detection up to 1500m from Tone Generator.

Impact Punchdown Tool Terminal Block Part No. KPT4

All in one Punchdown Tool for use on KATT & Krone style jacks & patch panels, built in scissor cuts the wire automatically, integrated hook for removing wires from insulation displacement connector, not recommended for terminating onto 110 insulation displacement connectors.

Precision K/110 Punchdown ToolPart No. KPT3

All in one Punchdown Tool for use on KATT, 110/AT&T & Krone style jacks, patch panels & 110 blocks, built in scissor cuts the wire automatically, integrated hook for removing wires from insulation displacement connector.

Telecommunications Splice CrimperPart No. TELSP2

Data Crimp Tool crimps RJ11, RJ12 & RJ45, parallel crimping action for quality crimps, built-in ratchet to ensure crimp is complete before tool releases, proven industry standard tool.

Strips the outer jacket of unshielded twisted pair & shielded twisted pair cables, strips multi strand phone/data cables from 3.2mm to 9.5mm outer diameter, strips flat cables from 2 to 10 pair, strips building wire up to 6mm2.

ALWAYS IN STOCK AT YOUR LOCAL CES STOREwww.cityelectricsupply.com.au

SAME DAY RANGEDATA & TELECOMS

RJ45 Modular Crimp PlugPart No. 0688RSL-C

RJ45 Modular Crimp Round Solid Plug for Cat5E data applications, high quality pin with 50um gold plating, low contact resistance, ACA approved, max conductor outer diameter range 1.0mm, 8 position 8 contact, quantity of 100 per pack.

RJ12 Modular Crimp PlugRJ11 Modular Crimp PlugPart No. 0664RSL-C

RJ12 Modular Crimp Round Solid Plug for voice applications, high quality pin with 50um gold plating, low contact resistance, ACA approved, 6 position 4 contact, quantity of 100 per pack.

Part No. 0644RSL-C

RJ11 Modular Crimp Round Solid Plug for voice applications, high quality pin with 50um gold plating, low contact resistance, ACA approved, 4 position 4 contact, quantity of 100 per pack.

Telecom Red URSplice Connectors

Part No. 374CUR2-C

Red Internal Contact Pins are tin plated brass & bodies are polycarbonate, certified to AS S008:2010, 3 wire filled with dimethyl silicone fluid insulation, quantity of 100 per pack.

Coupler RJ12Female To Female Adaptor

Part No. 40RJ12FF

Coupler RJ12 Female To Female Adaptor, connect multiple line cords, all RJ12 pinned one to one, beige.

Cat5E RJ45 JackKATT/110

Part No. J5E/50

Cat5E RJ45 white Jack fits directly into clipsal wall plates, KATT style termination, wiring label for both 568A & 568B wiring formats, RCM/A-Tick compliant, 8 position 8 contact, quantity of 50 per pack.

Telecom YellowUY Splice Connectors

Part No. 374CUY2-C

Yellow Internal Contact Pins are tin plated brass & bodies are polycarbonate, certified to AS S008:2010, 2 wire filled with dimethyl silicone fluid insulation, quantity of 100 per pack.

Coupler Cat6 KeystoneCat5E Keystone Coupler RJ45 Part No. CPLC6

Cat6 Coupler for use in keystone style wall plates & patch panels, quickly & easily join 2 x Cat6 patch leads, RCM/A-Tick compliant.

Part No. 42C5ECPL

Cat5E Coupler RJ45 for use in keystone style wall plates & patch panels, quickly & easily join 2 x Cat5E patch leads, RCM/A-Tick compliant, ideal for plug & play cabling applications.

The Power to Supply You...All Your Electrical Products

Jack Telco 6P4C RJ12 KeystonePart No. J6P4C/10

For use with modular telephone leads, 6 position 4 contact, A-Tick compliant, white, quantity of 10 per pack.

Wall PlatesAlso available in all of our stores is an assortment of wall plates.

1 Gang Wall Plate, White

2 Gang Wall Plate, White

3 Gang Wall Plate, White

4 Gang Wall Plate, White

Cat6 RJ45 Jack KATT/110Part No. J6/50

Cat6 RJ45 white Jack fits directly into Clipsal wall plates, KATT style termination, wiring label for both 568A & 568B wiring formats, RCM/A-Tick compliant, quantity of 50 per pack.

Cat5E RJ45 Data JackPart No. 30RJ45SMA5-WE

Modular Socket, Cat5E, RJ45, white, fits all clipsal style wall plates, flexible locking tabs for easy insertion/removal from the wall plate.

Cat6 RJ45 Data JackPart No. 30RJ45SMA6-WE

Modular Socket, Cat6, RJ45, white, fits all clipsal style wall plates, flexible locking tabs for easy insertion/removal from the wall plate.

Cat3 RJ12 Data JackPart No. 30RJ64SMT-WE

Modular Socket, Cat3 for voice & telephone, 6-way, 4 contact socket mechanism, fits into all Clipsal 30 series wall plates.

Jack Adaptor WhitePart No. 42ADCWH-X

Jack Adaptors allow the conversion of keystone jacks to flush mount to a Clipsal wall plate, white, quantity of 100 per pack.