MacBook Pro 15' Unibody Early 2011 Hard Drive/IR Sensor ... · MacBook Pro 15" Unibody Early 2011 Hard Drive/IR Sensor Cable Replacement Replace the hard drive/IR sensor cable on
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MacBook Pro 15" Unibody Early 2011 HardDrive/IR Sensor Cable Replacement
Replace the hard drive/IR sensor cable on your MacBook Pro 15" Unibody Early 2011.
Written By: Walter Galan
MacBook Pro 15" Unibody Early 2011 Hard Drive/IR Sensor Cable Replacement Draft: 2018-07-02Guide ID: 5894 -
This document was generated on 2019-09-23 08:46:38 AM (MST).
For certain repairs (e.g. hard drive), disconnecting the battery connector is not necessary but itprevents any accidental shorting of electronics on the motherboard. If you do not disconnect thebattery connector, please be careful as parts of the motherboard might be electrified.
Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.
It is useful to pry upward on both short sides of the connector to "walk" it out of its socket.
MacBook Pro 15" Unibody Early 2011 Hard Drive/IR Sensor Cable Replacement Draft: 2018-07-02Guide ID: 5894 -
This document was generated on 2019-09-23 08:46:38 AM (MST).