1. After core drilling wall place sleeve in opening and clip-fit external grille. 2. Locate position of sleeve internally and apply template of required size. 3. Cut out internal lining to required dimension. 4. Ensure ventilator body and male coupling is in alignment. 5. Apply bonding compound to aperture surround. 6. Position ventilator in aperture 7. Drive home the ventilator. 8. Make good the surround. 9. Remove protective strip after decoration is complete. MA3051: 80mm (INTERNAL) MA3051 Acoustic Wall Ventilator Installation Instructions Zehnder Group UK Limited, Watchmoor Point, Camberley, Surrey, GU15 3AD . Tel:+44 (0) 1276 408404 - Web:www.greenwood.co.uk - Email:[email protected] MA3051: 109mm (EXTERNAL) 11767_GW_MA3051_Acoustic_Wall_Vent_instructions_v2.indd 1 06/08/2009 12:44
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1. After core drilling wall place sleeve in opening and clip-fit external grille.
2. Locate position of sleeve internally and apply template of required size.
3. Cut out internal lining to required dimension.
4. Ensure ventilator body and male coupling is in alignment.
5. Apply bonding compound to aperture surround.
6. Position ventilator in aperture 7. Drive home the ventilator. 8. Make good the surround. 9. Remove protective strip after decoration is complete.
MA3051: 80mm (INTERNAL)
MA3051 Acoustic Wall Ventilator Installation Instructions
Zehnder Group UK Limited, Watchmoor Point, Camberley, Surrey, GU15 3AD.
Tel:+44 (0) 1276 408404 - Web:www.greenwood.co.uk - Email:[email protected]
MA3051: 109mm (EXTERNAL)
11767_GW_MA3051_Acoustic_Wall_Vent_instructions_v2.indd 1 06/08/2009 12:44
Related Documents
