M120 Desiccant Dehumidifier Product Description The M120 desiccant dehumidifier is designed to efficiently dehumidify air . Its very compact construction incorporates sections held together by four bolts. The sections contain fans that are driven by a common motor, a direct gear driven desiccant rotor, and a reactivation airflow heater. The two end casings contain distribution chambers with isolated sections that provide a precise balance for dehumidification and reactivation airflows. Its rugged casing is constructed from corrosion resistant die cast aluminium. The electrical control system conforms to EN 60204 (IEC204) standards and the electrical components are assembled in the front compartment. The M120 dehumidifier conforms to both harmonised European Standards and to CE marking specifications. Munters Rotor Technology The desiccant rotor is manufactured from a corrugated composite material that is highly effective at attracting and holding water vapour. Every Munters dehumidifier applies a unique rotor technology. Airflows, air conditions, rotor sections, and rotor rotation speeds are optimised for specific applications. An innovative control system maximises the units energy efficiency. A characteristic of the M120 rotor technology is an efficient air distribution chamber which divides the sectors and balances the dehumidification and reactivation airflows. PRODUCT INFORMATION M120 Features - High dehumidification capacity down to -20°C. - Robust design. - Shock and vibration proof. - Humidity plug with low voltage. - Requires minimal floor area.
2
Embed
M120 Desiccant Dehumidifier - Munters · PDF fileM120 Desiccant Dehumidifier Product Description The M120 desiccant dehumidifier is designed to efficiently dehumidify air . Its very
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
M120
Desiccant Dehumidifier
Product Description
The M120 desiccant dehumidifier is designed to efficientlydehumidify air . Its very compact construction incorporatessections held together by four bolts. The sections contain fans thatare driven by a common motor, a direct gear driven desiccantrotor, and a reactivation airflow heater. The two end casingscontain distribution chambers with isolated sections that provide aprecise balance for dehumidification and reactivation airflows. Itsrugged casing is constructed from corrosion resistant die castaluminium. The electrical control system conforms to EN 60204(IEC204) standards and the electrical components are assembled inthe front compartment. The M120 dehumidifier conforms to bothharmonised European Standards and to CE marking specifications.
Munters Rotor Technology
The desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency. Acharacteristic of the M120 rotor technology is an efficient airdistribution chamber which divides the sectors and balances thedehumidification and reactivation airflows.
PRODUCT INFORMATION
M120
Features
- High dehumidification capacitydown to -20°C.
- Robust design.
- Shock and vibration proof.
- Humidity plug with low voltage.
- Requires minimal floor area.
Model M120Diagram measurements are for referenceonly.
Scaled and dimensioned AutoCADdrawings are available in Munters’DryCap program.
B A
DE
D
E
C
Width (A) 425 mm
Depth (B) 481 mm
Height (C) 425 mm
Diam. (D) 100 mm
Diam. (E) 80 mm
Weight 26 kg
Technical Specification
Process airFreeblowing at 50Hz (m³/h) 180Freeblowing at 60Hz (m³/h) 210Rated airflow (m³/h) 120Available static pressure 50Hz (Pa) 200Available static pressure 60Hz (Pa) 360