8/4/2019 M Catalogue 2008
1/9
Elec t romotor
M Ser ies Three Phase Cast I ron Mot ors
Efficiency 2 three phase asynchronous motors
Cast Iron Construction
Available frame sizes 80 -355 IEC
8/4/2019 M Catalogue 2008
2/9
Frame Size
- speedDriving End Non-driving End
Oil Seals
Drive End Non Drive End
71 6202 ZZ 15x30x4
80 6204 ZZ 20x35x4
90 6205 ZZ 25x40x 4
100 6206 ZZ 30x47x4.5
112 6206 ZZ 35x52x4.5132 6208 ZZ 40x57x4.5
160 6309 ZZ 45x62x4.5
180 6311 C3 55x72x8
200 6312 C3 60x80x8
225 6313 C3 6312 C3 65x90x10 60x80x8
250 6314 C3 6313 C3 70x95x10 65x90x10
280 -2 6314 C3 70x95x10
280 -4,6,8 6317 C3 6314 C3 85x110x12 70x95x10
315 -2 6317 C3 85x110x12
315 -4,6,8 NU319 6319 C3 95x120x12355 -2 6319 C3 95x120x12
355 -4,6,8 NU322 6322 C3 110x140x12
IEC Frame size 63-355Power 0.12kW 315kWSynchronous speed 3000, 1500, 1000 and 750 rpmVoltage 230/400 or 400/690Frequency 50/60Hz
Protection Class IP55Insulation class FAmbient Temperature -15C - +40CAltitude above sea level 1000m
See Table 1 for the mounting arrangementsSee Table 2 for Bearing and Oil Seal detailsSee Table 3 & 4 for Technical DataSee Table 5-8 for Dimensions
M Three phase motors Cast Iron
Table 2
Table 1
1
8/4/2019 M Catalogue 2008
3/9
Type
Rated
output
(KW)
At full loadNom
Torque
(Nm)
Start
Curr
Is/In
Tstart
/Tn
Tmax
/Tn
Net
Weight
(kg)
Noise
level
dB(A) @
Full Load
Speed
(r/min)
Current
400v
(A)
Eff.
(%)
Power
factor
Cos
2-pole speed 3000 r/min 50Hz
63K 0.18 2730 0.5 65 0.80 0.5 5.5 2.2 2.2 5 63
63G 0.25 2800 0.7 68 0.81 0.7 5.5 2.2 2.2 5.4 63
71K 0.37 2760 1.0 70 0.81 1.3 6.1 2.2 2.2 7.8 66
71G 0.55 2800 1.4 73 0.82 1.9 6.1 2.2 2.3 10 66
80K 0.75 2830 1.8 75 0.83 2.5 6.1 2.2 2.3 16 69
80G 1.1 2830 2.5 77 0.84 3.7 7.0 2.2 2.3 17 69
90S 1.5 2840 3.3 79 0.84 5.0 7.0 2.2 2.3 22 74
90L 2.2 2840 4.6 81 0.85 7.4 7.0 2.2 2.3 25 74
100L 3 2860 6.0 83 0.87 10 7.5 2.2 2.3 33 78
112M 4 2880 7.7 85 0.88 13 7.5 2.2 2.3 45 79
132S 5.5 2900 10.5 86 0.88 18 7.5 2.2 2.3 64 82
132SX 7.5 2900 14.1 87 0.88 25 7.5 2.2 2.3 70 82
160M 11 2930 20.3 88 0.89 36 7.5 2.2 2.3 117 88160MX 15 2930 27.3 89 0.89 49 7.5 2.2 2.3 125 88
160L 18.5 2930 33.0 90 0.90 60 7.5 2.2 2.3 147 88
180M 22 2940 39.2 90 0.90 71 7.5 2.0 2.3 180 91
200L 30 2950 52.8 91.2 0.90 97 7.5 2.0 2.3 240 94
200LX 37 2950 64.5 92 0.90 120 7.5 2.0 2.3 255 94
225M 45 2970 78.2 92.3 0.90 145 7.5 2.0 2.3 309 94
250M 55 2970 95.4 92.5 0.90 177 7.5 2.0 2.3 403 95
280S 75 2970 129.3 93 0.90 241 7.5 2.0 2.3 544 96
280M 90 2970 152.2 93.8 0.91 289 7.5 2.0 2.3 620 96
315S 110 2980 185.6 94 0.91 353 7.1 1.8 2.2 980 98
315M 132 2980 221.6 94.5 0.91 423 7.1 1.8 2.2 1080 98
315L 160 2980 265.4 94.6 0.92 513 7.1 1.8 2.2 1160 101
315LX 200 2980 331.0 94.8 0.92 641 7.1 1.8 2.2 1190 101355M 250 2980 411.6 95.3 0.92 801 7.1 1.6 2.2 1760 105
355L 315 2980 517.0 95.6 0.92 1,009 7.1 1.6 2.2 1850 105
63G 0.18 1320 0.6 60 0.73 1.3 4.4 2.1 2.2 5.5 57
71K 0.25 1350 0.8 65 0.74 1.8 5.2 2.1 2.2 7 60
71G 0.37 1340 1.1 67 0.75 2.7 5.2 2.1 2.2 7.5 60
80K 0.55 1390 1.5 71 0.75 3.8 5.2 2.4 2.3 17 63
80G 0.75 1390 2.0 73 0.76 5.2 6.0 2.3 2.3 18 63
90S 1.1 1390 2.8 75 0.77 7.6 6.0 2.3 2.3 22 66
90L 1.5 1390 3.5 78 0.79 10 6.0 2.3 2.3 27 66
100L 2.2 1410 4.9 80 0.81 15 6.0 2.3 2.3 34 69
100LX 3 1410 6.5 82 0.82 20 7.0 2.3 2.3 38 69
112M 4 1440 8.4 84 0.82 27 7.0 2.3 2.3 43 70132S 5.5 1440 11.3 85 0.83 36 7.0 2.3 2.3 68 76132M 7.5 1440 14.8 87 0.84 50 7.0 2.3 2.3 81 76
160M 11 1460 21.5 88 0.84 72 7.0 2.2 2.3 123 80
160L 15 1460 30.1 89 0.85 96 7.5 2.2 2.3 144 79
180M 18.5 1470 34.3 90.5 0.86 121 7.5 2.2 2.3 182 80
180L 22 1470 40.6 91 0.86 143 7.5 2.2 2.3 190 80
200L 30 1470 54.7 92 0.86 194 7.2 2.2 2.3 270 83
225S 37 1480 66.4 92.5 0.87 239 7.2 2.2 2.3 284 85
225M 45 1480 80.5 92.8 0.87 290 7.2 2.2 2.3 320 84
250M 55 1480 98.1 93 0.87 355 7.2 2.2 2.3 427 86
280S 75 1480 132.7 93.8 0.87 484 7.2 2.2 2.3 562 89
280M 90 1480 158.5 94.2 0.87 581 7.2 2.2 2.3 667 89
315S 110 1490 191.0 94.5 0.88 705 6.9 2.1 2.2 1000 96
315M 132 1490 228.4 94.8 0.88 846 6.9 2.1 2.2 1100 96315L 160 1490 273.4 94.9 0.89 1026 6.9 2.1 2.2 1160 100
315LX 200 1490 334.4 95 0.89 1282 6.9 2.1 2.2 1270 100
355M 250 1490 420.7 95.3 0.90 1602 6.9 2.1 2.2 1700 104
355L 315 1490 528.4 95.6 0.90 2019 6.9 2.1 2.2 1850 104
Table 3
2
8/4/2019 M Catalogue 2008
4/9
Type
Rated
output
(KW)
At full loadNom
Torque
(Nm)
Start
Curr
Is/In
Tstart
/Tn
Tmax
/Tn
Net
weight
(kg)
Noise
level
dB(A) @
Full Load
Speed
(r/min)
Current
(A)
Eff.
(%)
Power
factor
cos
6-pole speed 1000 r/min 50Hz
71K 0.18 870 0.7 56 0.66 2.0 4.0 1.9 2.0 7 59
71G 0.25 870 0.9 59 0.68 2.8 4.0 1.9 2.0 8 59
80K 0.37 890 1.3 62 0.70 4.0 4.7 1.9 2.0 17 61
80G 0.55 890 1.7 65 0.72 5.9 4.7 1.9 2.1 19 62
90S 0.75 910 2.2 69 0.72 7.9 5.5 2.0 2.1 23 64
90L 1.1 910 3.0 72 0.73 11.5 5.5 2.0 2.1 25 65
100L 1.5 920 3.8 76 0.75 15.6 5.5 2.0 2.1 33 68
112M 2.2 940 5.3 79 0.76 22.5 6.5 2.0 2.1 45 72
132S 3 960 7.0 81 0.76 30 6.5 2.1 2.1 63 76
132M 4 960 9.3 82 0.76 40 6.5 2.1 2.1 73 76
132MX 5.5 960 12.3 84 0.77 55 6.5 2.1 2.1 84 76
160M 7.5 970 16.4 86 0.77 74 6.5 2.0 2.1 119 80
160L 11 970 23.3 87.5 0.78 108 6.5 2.0 2.1 147 80
180L 15 970 30.0 89.0 0.81 148 7.0 2.0 2.1 195 79
200L 18.5 970 36.6 90.0 0.81 182 7.0 2.1 2.1 220 82
200LX 22 970 42.5 90.0 0.83 217 7.0 2.1 2.1 250 82
225M 30 980 56.3 91.5 0.84 292 7.0 2.0 2.1 292 82
250M 37 980 67.5 92 0.86 361 7.0 2.1 2.1 408 84
280S 45 980 81.7 92.5 0.86 439 7.0 2.1 2.0 536 85
280M 55 980 99.5 92.8 0.86 536 7.0 2.1 2.0 595 85
315S 75 990 134.6 93.5 0.86 723 7.0 2.0 2.0 990 90
315M 90 990 161.1 93.8 0.86 868 7.0 2.0 2.0 1080 90
315L 110 990 196.1 94.0 0.86 1061 6.7 2.0 2.0 1150 90
315LX 132 990 232.5 94.2 0.87 1273 6.7 2.0 2.0 1210 89
355M 160 990 227.7 94.5 0.88 1543 6.7 1.9 2.0 1600 96
355MX 200 990 346.4 94.7 0.86 1929 6.7 1.9 2.0 1700 96
355L 250 990 432.1 94.9 0.86 2412 6.7 1.9 2.0 1800 96
8-pole speed 750 r/min 50Hz
80K 0.18 630 0.9 51.0 0.61 2.7 3.3 1.8 1.9 17 60
80G 0.25 640 1.1 54.0 0.61 3.7 3.3 1.8 1.9 19 60
90S 0.37 660 1.4 62.0 0.61 5.4 4.0 1.8 1.9 23 64
90L 0.55 660 2.1 63.0 0.61 8.0 4.0 1.8 2.0 25 64
100L 0.75 690 2.3 71.0 0.67 10.4 4.0 1.8 2.0 33 67
100LX 1.1 690 3.2 73.0 0.69 15.2 5.0 1.8 2.0 38 67
112M 1.5 680 4.2 75.0 0.69 21.1 5.0 1.8 2.0 50 69
132S 2.2 710 5.8 78.0 0.71 30 6.0 1.8 2.0 63 72
132M 3 710 7.5 79.0 0.73 40 6.0 1.8 2.0 79 72
160M 4 720 9.8 81.0 0.73 53 6.0 1.9 2.0 118 76
160MX 5.5 720 12.9 83.0 0.74 73 6.0 2.0 2.0 119 76
160L 7.5 720 16.9 85.5 0.75 99 6.0 2.0 2.0 145 78
180L 11 730 23.9 87.5 0.76 144 6.6 2.0 2.0 184 78
200L 15 730 32.4 88.0 0.76 196 6.6 2.0 2.0 250 80
225S 18.5 730 39.1 90.0 0.76 242 6.6 1.9 2.0 266 80
225M 22 740 45.0 90.5 0.78 284 6.6 1.9 2.0 292 80
250M 30 740 63.4 91.0 0.79 387 6.6 1.9 2.0 405 82
280S 37 740 73.9 91.5 0.79 478 6.6 1.9 2.0 520 83
280M 45 740 89.4 92.0 0.79 581 6.6 1.9 2.0 592 82
315S 55 740 105.6 92.8 0.81 710 6.6 1.8 2.0 1000 88
315M 75 740 143.7 93.0 0.81 968 6.6 1.8 2.0 1100 88
315L 90 740 168.9 93.8 0.82 1161 6.6 1.8 2.0 1160 88
315LX 110 740 206.0 94.0 0.82 1420 6.4 1.8 2.0 1230 88
355M 132 740 248.0 93.7 0.82 1704 6.4 1.8 2.0 1600 95
355MX 160 740 299.0 94.2 0.82 2065 6.4 1.8 2.0 1700 95
355L 200 740 368.1 94.5 0.83 2581 6.4 1.8 2.0 1800 95
Table 4
3
8/4/2019 M Catalogue 2008
5/9
Size PolesCable
Glands
Mounting Dimensions (mm) Frame Dimensions
A B C D DH E F G H K AB AC HD L63 2,4
M20x1
10 80 40 11 +0.008
-0.000
M4 23 4 8.5 637
135 130 180 230
71 2,4,6 112 90 45 14 M5 30 5 11 71 150 145 195 255
80
2,4,6,8
125 100 50 19
+0.009
-0.004
M6 40 6 15.5 80
10165 175 220
295
90S
M25x1
140100
56 24 M8 50
8
20 90320
90L 125 180 195 250 345
100L 160 140 6328 M10 60 24
100
12
205 215 270 385
112M 190 140 70 112 230 240 300 400
132SM25x2 216
14089 38
+0.018
+0.002
M12 80 10 33 132 270 275 345470
132M 178 510
160M
M32x1254
210
108 42M16
110
12
37 16015
320 330 420
615
160L 254 670
180M279
241121 48 14 42.5 180 355 380 455
700
180L 279 740
200L M40x2 318 305 133 55
+0.030+0.011
M20
16 49 200
19
395 420 505 770
225S 4,8
M50x2
356
286
149
60 140 18 53
225 435 470 560
815
225M2
31155 110 16 49 820
4,6,860
140
18
53845
250M2
406 349 168 250
24
490 510 615 9104,6,8
65 58
280S2
457
368
190 280 550 580 680
9854,6,8 75 20 67.5
280M2
41965 18 58
10354,6,8 75 20 67.5
315S2
M63x2
508
406
216
65 18 58
315
28
635 645 845
1185
4,6,8,10 80 170 22 71 1215
315M2
45765 140 18 58 1295
4,6,8,10 80 170 22 71 1325
315L2
50865 140 18 58 1295
4,6,8,10 80 170 22 71 1325
355M
2
610
560
254
75 140 20 67.5
355 730 710
101
0
1500
4,6,8,10 95+0.035
+0.013170 25 86 1530
355L
2
630
75 +0.030+0.011
140 20 67.5 1500
4,6,8,10 95+0.035
+0.013M24 170 25 86 1530
Table 5
4
8/4/2019 M Catalogue 2008
6/9
Size PolesCable
Gland
Mounting Dimensions (mm) Frame Dimensions
A B C D E F G H K M N P S T AB AC HD L63 2,4
M20x1
10 80 40 11 +0.008
-0.000
23 4 8.5 637
115 95 14010x4
3 135 130 180 230
71 2,4,6 112 90 45 14 30 5 11 71 130 110 160
3.5
150 145 195 255
80
2,4,6,8
125 100 50 19
+0.009
-0.004
40 6 15.5 80
10165 130 200 12x4165 175 220
295
90S
M25x1
140100
56 24 50
8
20 90320
90L 125 180 195 250 345
100L 160 140 6328 60 24
100
12
215 180 250
15x44
205 215 270 385
112M 190 140 70 112 230 240 300 400
132S M25x2 216 140 89 38
+0.018
+0.002
80 10 33 132 265 230 300 270 275 345 470132M 178 510
160M
M32x2
254210
108 42
110
1237 160
15300 250 35019x4
5
320 330 420615
160L 254 670
180M279
241121 48 14 42.5 180 355 380 455
700
180L 279 740
200L M40x2 318 305 133 55
+0.030
+0.011
16 49 200
19
350 300 400 395 420 505 770
225S 4,8
M50x2
356
286
149
60 140 18 53
225 400 350 450
19x8
435 470 560
815
225M2
31155 110 16 49 820
4,6,860
140
18
53845
250M2
406 349 168 250
24500 450 550
490 510 615 9104,6,8
65 58
280S 2
457
368
190 280 550 580 680
9854,6,8 75 20 67.5
280M2
41965 18 58
10354,6,8 75 20 67.5
315S2
M63x2
508
406
216
65 18 58
315
28
600 550 660
24x8 6
635 645 845
1185
4,6,8,10 80 170 22 71 1215
315M2
45765 140 18 58 1295
4,6,8,10 80 170 22 71 1325
315L2
50865 140 18 58 1295
4,6,8,10 80 170 22 71 1325
355M
2
610
560
254
75 140 20 67.5
355 740 680 800 730 710 1010
1500
4,6,8,10 95+0.035
+0.013170 25 86 1530
355L
2
630
75+0.030
+0.011140 20 67.5 1500
4,6,8,10 95+0.035
+0.013170 25 86 1530
Table 6
5
B5 flange frame size
63-200
B5 flange frame size
200-355
8/4/2019 M Catalogue 2008
7/9
Size Poles CableGland
Mounting Dimensions (mm) Frame DimensionsD E F G M N P S T AC HD L
63 2,4
M20x1
11 +0.008
-0.000
23 4 8.5 115 95 14010x4
3 130 140 230
71 2,4,6 14 30 5 11 130 110 160
3.5
145 160 255
80
2,4,6,8
19
+0.009
-0.004
40 6 15.5
165 130 200 12x4175 245
295
90S
M25x1
24 50
8
20320
90L 195 255 345
100L28 60 24 215 180 250
15x44
215 305 385
112M 240 315 400
132SM25x2 38
+0.018
+0.002
80 10 33 265 230 300 275 360470
132M 510
160M
M32x2
42
110
1237
300 250 35019x4
5
330 430615
160L 670
180M48 14 42.5 380 455
700
180L 740
200L M40x2 55
+0.030
+0.011
16 49 350 300 400 420 505 770
225S 4,8
M50x2
60 140 18 53
400 350 450
19x8
470 560
815
225M2 55 110 16 49 820
4,6,860
140
18
53845
250M2
500 450 550
510 645 9104,6,8
65 58
280S2
580 6859854,6,8 75 20 67.5
280M2 65 18 58
10354,6,8 75 20 67.5
Table 7
6
B5 Flange
Frame size
63-200
B5 Flange
Frame size
225-355
8/4/2019 M Catalogue 2008
8/9
Size Poles CableGland
Mounting Dimensions Frame Dimensions
D E F G M N P S T AC HD L
180M
2,4,6,8M32x2 48
+0.018
+0.002 11014
42.
5300 250 350
19x4
5
380 455760
180L 800
200L M40x2 55
+0.030+0.011
16 49 350 300 400 420 505 840
225S 4,8
M50x2
60 140 18 53
400 350 450
19x8
470 560
905
225M2 55 110 16 49 910
4,6,860
140
18
53935
250M2
500 450 550
510 645 10154,6,8
65 58
280S2
580 685
11104,6,8 75 20 67.5
280M2 65 18 58
11504,6,8 75 20 67.5
315S2
M63X2
65 18 58
600 550 660
24x8 6
645 860
1280
4,6,8 80 170 22 71 1510
315M2 65 140 18 58 1310
4,6,8,10 80 170 22 71 1430
315L2 65 140 18 58 1310
4,6,8,10 80 170 22 71 1430
355M
2 75 140 20 67.5
740 680 800 710 1055
1640
4,6,8,10 95+0.035
+0.013170 25 86 1670
355L
2 75 +0.030+0.011
140 20 67.5 1640
4,6,8,10 95+0.035
+0.013170 25 86 1670
Table 8
7
225-355
63-200
8/4/2019 M Catalogue 2008
9/9
Unit 2, Crossley Mills, New Mill Road, Honley, Holmfirth, HD9 6QB, EnglandTel: +44(0)1484 660 222 Fax: +44(0)1484 660 333Web-site: www.kenworthproducts.co.uke-mail: [email protected] (Northern) Office
Motors
Unit 16, Anson Road, Martlesham Heath, Suffolk, IP5 3RG, EnglandTel: +44(0)1473 636 102 Fax: +44(0)1473 333 277Web-site: www.kenworthproducts.co.uke-mail: [email protected] Office
Kenwor thProducts
Universal
Also available from Kenworth Products Ltd
From stock
110v and 230v single phase motors
Progressive (high output) motors
ATEX approved EExd Flameproof motors
DC & AC Brake motors.
Forced Ventilation Fans
Slide Rails and Bases
Full range of spares off the shelf.
D.O.L Starters
Available to order:-
2 Speed motors with one and two windings
B56 fractional frame motors (2/3 days)
High Efficiency three phase motors EFF1
ATEX approved EExe Increased Safety motors
Slip ring and CSA approved NEMA frame motors.
Marine motors
Medium and High Voltage MotorsStar Delta Starters
All motors are subject to a documented test and serialisation procedure before leaving our
factory in Huddersfield.
Optional extras are not a problem including forced ventilation kits,thermistors, anti-condensation heaters, increased IP rating etc, etc.
Lead times for non-stock or special Motors approximately half of the
time of our competitors, ideal for O.E.Ms.
Motors can be supplied up to 3150 kW, with voltages up to 6600v.
http://www.kenworthproducts.co.uk/mailto:[email protected]://www.kenworthproducts.co.uk/mailto:[email protected]:[email protected]://www.kenworthproducts.co.uk/mailto:[email protected]://www.kenworthproducts.co.uk/