LVS-9570 Information Book - mctram.commctram.com/wp-content/uploads/2018/07/lvs_9570_overview_book.pdf · LVS-9570 Information Book . 4. of . 12. Features. The LVS-9570 is a 1D and

LVS® 9570 Information Book

P/N 83-9310004-02 Rev A

LVS-9570 Information Book 2 of 12

Table of ContentsFeatures...................................................................................................................................4

Engineering Specifications.......................................................................................................6

Configurations..........................................................................................................................7

Supported Symbologies...........................................................................................................8

Supported Standards...............................................................................................................8

Software Overview...................................................................................................................8

Terms and Conditions...............................................................................................................9


LVS-95XX Series Barcode Quality Station Operations Manual

LVS-95XX Series Barcode Quality Station 49fo2egaPhsilgnE-launaMsnoitarepO

Copyright ©2016 Microscan Systems, Inc. Tel: +1.425.226.5700 / 800.762.1149 Fax: +1.425.226.8250

All rights reserved. The information contained herein is proprietary and is provided solely for the purpose of allowing customersto operate and/or service Microscan manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Microscan.

Throughout this manual, trademarked names might be used. We state herein that we are using the names to the benefit of the trademark owner, with no intention of infringement.

GS1 Solution Partner

Disclaimer The information and specifications described in this manual are subject to change without notice.

Latest Manual Version For the latest version of this manual, see the Download Center on our web site at: www.microscan.com.

Technical Support For technical support, e-mail: [email protected].

Warranty For current warranty information, see: www.microscan.com/warranty.

Microscan Systems, Inc.

United States Corporate Headquarters +1.425.226.5700 / 800.762.1149

United States Northeast Technology Center +1.603.598.8400 / 800.468.9503

European Headquarters +31.172.423360

Asia Pacific Headquarters +65.6846.1214

http://www.microscan.com/en-us/home.aspx

http://www.microscan.com/en-us/serviceandsupport/productwarranty.aspx

mailto:[email protected]


FeaturesThe LVS-9570 is a 1D and 2D handheld bar code verifier designed for offline verification of bar codes to ISO/IEC standards. The LVS-9570 is unique in the world of ISO verification due to its ease of use and ability to verify linear (1D) and two-dimensional (2D) codes using a lightweight, handheld verifier; autodiscriminate the symbology, narrow bar width and aperature to be used to evaluate the code; and highlight trouble spots in the code. Additional outstanding features include:

InspectionInspects all nine of the ISO (ANSI) parameters, plus added features of determining blemishes, opacity, and human readable validation. The LVS-9570 also verifies 2D codes and reports all parameters as specified in the applicable symbology specification.

Detailed AnalysisAnalysis is color coded to show exactly where the problem is located within the bar code, and sections of the bar code can be analyzed to determine how to solve the problem. Reference to an online Help screen aids in the analysis.

Advanced TechnologySensor technology allows more detailed analysis of the bar code, and makes reading of small and truncated codes possible, accurate and easy.

Numerous Verification OptionsMultiple codes, including any combination of Linear, Matrix (such as Data Matrix, QR Code and Aztec Code) and Stacked Linear (such as PDF 417, Micro PDF and Composite Codes) can be verified on one label within the field of view.

ISO GradingISO grades bar codes on various label sizes.

AccurateThe LVS-9570 is the most accurate handheld verifier on the market today with the highest degree of accuracy and repeatability.

ReliableThe LVS-9570 is the most reliable handheld verifier on the market.


EAN/UPC NIST Traceable Calibrated Conformance Standard Test CardThe LVS-9570 is supplied with a NIST traceable calibrated conformance standard test card provided by GS1 to ensure that the system is always within a known calibration standard.

21 CFR Part 11 compliant-ready


Engineering SpecificationsPhysical Properties

Scanner• 400 DPI• Floating Sensor Head

Overall Scanning Width• 5.4 inches (137.16 mm) (picket fence format)• 12.0 inches (305 mm) (ladder format)

Minimum X-Dimension• 1D (Narrow Bar Width)8.8 mils (0.0088”) (0.223 mm)• 2D (Cell Size)12.5 mils (0.0125”) (0.317 mm)

Verification• 1D and 2D codes that comply with ISO/IEC standards and GS1 General Specifications

Minimum PC Requirements (PC supplied by customer)

• Windows® 7 Professional, Windows® 8.1 Professional,and Windows® XP Professional Windows® Vista is not supported• Intel® Core™ 2 Duo or equivalent (Intel® Core™ 2 Quad is preferred)• 2 GB RAM (4 GB is preferred)• 800 x 600 Resolution• One available USB 2.0 port

2.13 inches 54.10 mm 4 inches 101.6 mm

3.94 inches 100.08 mm

6.56 inches 166.62 mm

2.3 pounds 1.04 kg

Height

• Verifier height

• Total height

including handle

Length

Width

Weight

Light Source• Red Light• 660 nm

Inputs / Outputs• USB 2.0 port

Operating Temperature• 10º C (50º F) to 30º C (86º F)

Storage Temperature• 0º C (32º F) to 40º C (104º F)

Relative Humidity• 20% to 70% (no watercondensation allowed)

Calibration• EAN/UPC Calibrated ConformanceTest Card (LVS® part # CAL002)

21 CFR Part 11 Compliant-Ready

The LVS-9570 uses a 400 dpi scanner to verify 1D and 2D codes that comply with ISO/IEC standards and GS1 General Specifications.

ITEMS INCLUDED WITH PURCHASE• LVS-9570 Handheld Barcode Verifier• USB Cable• EAN/UPC NIST traceable Calibrated Conformance Test Card (test card) used for

calibrating the INTEGRA 9570. The test card is provided by GS1 to ensure the LVS-9570 is always within a known calibration standard.

• Installation CD (includes LVS-9570 software and “LVS-9570 Series Bar Code QualityStation Operations Manual”)

• LVS-9570 Series Software Installation Guide• “LVS-9570 Operating Instructions” manual• Flash Drive (contains LVS-9570 demonstration video)

Note: The LVS-9570 connects to a customer-supplied computer. See “Engineering Specifications” section for minimum computer requirements.

INSTALLATIONInstallation of the LVS-9570 consists of two easy steps:

1. Install the LVS-9570 software (located on the Installation CD) on a customer-suppliedcomputer. Onscreen instructions guide you through each step of the installation process.

2. Connect the USB cable from the computer’s USB port to the LVS-9570’s USB port.An onscreen instructional Wizard is provided, along with an “LVS-9570 Series SoftwareInstallation Guide,” ensuring the installation process is as simple as possible.


Configurations

Minimum X Dimension (Nominal):

Field of View (Approximate):

Calibration Card:

INTEGRA 9570 Part Number:

1D (Narrow Bar Width): 8.8 mils (0.0088 inches) (0.223 mm)2D (Cell Size): 12.5 mils (0.0125 inches) (0.317 mm)

5.4 inches (138 mm)

EAN/UPC (Part Number: CAL002)

9570-C-5-0

Below are just a few of the symbologies supported by the LVS-9570.Contact Microscan® for a full list of supported symbologies.

Aztec CodeComposite Code CC-AComposite Code CC-BComposite Code CC-CCodabarCode 128Code 39Code 93DataBar expandedDataBar limitedDataBar stackedDataBar-14EAN/JAN-13EAN/JAN-8ECC-200 (Data Matrix)GS1-128

The LVS-9570 supports the following standards:

APPLICATION STANDARDS:Below are just a few Application Standards supported by the LVS-9570:

AIAG/DAMA/JAPIA/OdetteALDIAS9132-A /AIM DPM Cat 0DHLGS1 General SpecificationsIFAHItalian PharmacodeJapan CodabarLaetus Miniature PharmacodeLaetus PharmacodeLaetus Standard

Hanxin CodeInterleaved 2 of 5 (ITF)ITF-14Japan PostMaxiCodeMicro QR CodeMicroPDF417MSI PlesseyPDF417Pharmacode - ItalianPharmacode - LaetusQR CodeUPC-AUPC-EUSPS Intelligent Mail Barcode (also referred to as 4-State Barcode)

MIL-STD-130MPZN (big, normal, small)

ISO CONFORMANCE STANDARDS:ISO/IEC 15415:2004(E)ISO/IEC 15416:2000(E)ISO/IEC 15426-1:2000(E)ISO/IEC 15426-2:2004(E)All supported ISO/IEC symbology specifications


Supported Symbologies

Supported Standards

The LVS-9570 software is comprised of tabs located across the top of the screen, each designed to perform a specific function. Refer to the following sections for more information on each tab.

WELCOME TABThe Welcome tab is the first tab to appear when logging onto the LVS-9570. This tab provides the version number and allows the user to select the desired software language. The LVS-9570 currently supports 11 languages.

SETUP TABThe Setup tab is where system settings are defined, such as:

• The preferred method of grading bar codes (automatic, manual or auto-sector)• Single or Multi-bar code Verification• Application Standards• Camera options• Operator names and passwords• Local time of day, date, Greenwich Mean Time (GMT), and time zone• Product Information (used for EAN-8, EAN-13, UPC-A, and UPC-E Symbologies)• Distributor Information


Software Overview

Tabs

CALIBRATION TABThe Calibration tab is where calibration of the system occurs. An EAN/UPC NIST traceable Calibrated Conformance Test Card (test card) used for calibrating the LVS-9570. The test card is provided by GS1 to ensure the LVS-9570 is calibrated according to ISO/IEC 15416:2000(E) and is traceable to NIST standards.

GRADING TABThe Grading tab performs the following functions:

• Indicates the overall grade of the bar code.• Single or Multi-bar code Verification• Allows you to select one of two ways to verify a bar code: Full or Pass/Fail.

• The “Full” option analyzes a bar code in detail and displays the ISO parameters.• The “Pass/Fail” option should be selected if you are not interested in the detailedanalysis of the bar code and are more interested in whether the bar code meetsyour company’s minimum ISO grade requirements.

• Viewing options such as:

• Verify the following types of codes: linear codes, two-dimensional matrix codesand two-dimensional multi-row codes.

• View all of the measured parameters individually, which are used to determine whya bar code has a certain grade. There are numerous parameters listed, dependingon the symbology.• Checks for Opacity and Blemishes.• Height and Width measurements of the bar code. • Color Code legend which reports ISO/IEC grades by color code.


OPTION DESCRIPTION

Contrast Contrast of each scan line on the bar code.

Modulation Allows you to view a modulation error.

Decodability Indicates the measurement of the deviation of the width of bars and spaces when compared to their ideal widths.

Defects Indicates elements on the correct side of the global threshold but have deviation in reflectance.

OCR Verifies the human readable portion of a bar code.

Zoom Allows you to view small labels

ZOOM TABThe Zoom tab allows you to further evaluate the quality of bar codes by magnifying the bar code image up to four times. You can change the position of magnification by clicking on a different position on the image, and you can also change the horizontal and vertical position of the image.

SRP VIEW TABThe SRP (Scan Reflectance Profile) tab allows you to further evaluate a bar code error by selecting what type of error will be super-imposed onto the SRP graph. Options include:

• Element Reflectance• Modulation• Decodability (width of each element)

STRUCTURE TABMany organizations throughout the world create bar code labels according to a set of rules used to standardize how bar code data is to be structured in order to easily transfer trade-related information between two parties. For the most part, these rules were created and governed by an international group called ISO/IEC. The Structure tab shows the data structure analysis of all bar code symbologies.

ARCHIVE TABThe LVS-9570 constantly monitors the bar code image and determines if it is different from the last bar code image collected. If the image is different, the software stores the new report and marks it with a file number along with a new date/time stamp. The Archive Tab allows you to access these various reports and files, which are stored in an SQL-compatible database. Archive options include:

• Import Image from File• Export Image to File• Recent Reports (last 30 days)• Delete Prior to Specific Date• Software Version History Files• Audit Trail Report


• Defects (inflection to element reflectance)• Full Screen Waveform• Traditional Bar Growth and Shrinkage

• Calibration Report (History)• Reference Report• Export reference data• Change SQL connection• Create Backup database• Browse Backup database


SAFETY CERTIFICATIONS DESIGNED FORFCC, CE, UL (Pending)

ROHS COMPLIANT

QMS CERTIFICATION www.microscan.com/quality©2016 Microscan Systems, Inc.

Warranty – For current warranty information about this product, please visit www.microscan.com/warranty.

ISO 9001 Registered

www.microscan.com

LVS-9570 Information Book - mctram.commctram.com/wp-content/uploads/2018/07/lvs_9570_overview_book.pdf · LVS-9570 Information Book . 4. of . 12. Features. The LVS-9570 is a 1D and

Documents