AUTOMOTIVE PB175 LUXEON Altilon SMD Product Brief ©2017 Lumileds Holding B.V. All rights reserved. LUXEON Altilon SMD Automotive forward lighting source LUXEON Altilon SMD is specifically designed and tested to meet and exceed expectations for reliability, performance, and lifetime in automotive forward lighting applications. It is designed to be assembled with industry standard soldering reflow lines simplifying system integration and lowering assembly costs. LUXEON Altilon SMD provides industry-best thermal performance in LED forward lighting applications, meeting both SAE and ECE color specifications with finer granularity than existing systems. PPAP documentation is available upon request. All LUXEON Altilon SMD LEDs are IEC-60810 qualified. FEATURES AND BENEFITS PRIMARY APPLICATIONS Higher drive current capability for increased flux performance Adaptive Lighting Low thermal resistance and power consumption results in simplified thermal management and system cost – AFS High flux output provides flexibility in styling and optical design Daytime Running Lights Surface mount device to reduce overall costs Front Fog Headlight – Low Beam – High Beam – Static Bending Lights
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AUTOMOTIVE
PB175 LUXEON Altilon SMD Product Brief ©2017 Lumileds Holding B.V. All rights reserved.
LUXEON Altilon SMDAutomotive forward lighting source
LUXEON Altilon SMD is specifically designed and tested to meet
and exceed expectations for reliability, performance, and lifetime in
automotive forward lighting applications. It is designed to be assembled
with industry standard soldering reflow lines simplifying system
integration and lowering assembly costs. LUXEON Altilon SMD provides
industry-best thermal performance in LED forward lighting applications,
meeting both SAE and ECE color specifications with finer granularity than
existing systems. PPAP documentation is available upon request. All
LUXEON Altilon SMD LEDs are IEC-60810 qualified.
FEATURES AND BENEFITS PRIMARY APPLICATIONS
Higher drive current capability for increased flux performance Adaptive Lighting
Low thermal resistance and power consumption results in simplified thermal management and system cost – AFS
High flux output provides flexibility in styling and optical design Daytime Running Lights
Surface mount device to reduce overall costs Front Fog
Headlight
– Low Beam
– High Beam
– Static Bending Lights
©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries.
lumileds.com
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.
PB175 LUXEON Altilon SMDProduct Brief 20170123
LUXEON Altilon SMD Absolute Ratings.
PARAMETERPERFORMANCE
1x2 1x3 1x4 1x5
Minimum DC Forward Current 100mA
Maximum DC Forward Current 1500mA
Operating Case Temperature at 700mA [1, 2] -40°C to 130°C
Maximum Junction Temperature [1, 2] 150°C
Operating Case Temperature at Maximum Current -40°C to 125°C
Maximum Junction Temperature for Short Time Applications [3] 175°C
Maximum Vf at 1500mA & -40°C [1, 2] 7.8 11.6 15.4 19.3
Minimum Vf at 1500mA & 150°C 5.5 8.1 11.0 13.6
LED Storage Temperature -40°C to 130°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reflow Cycles 2
ESD Sensitivity [4] 8kV HBM, 2kV CDM, 400V MM
Reverse Voltage (Vreverse) LUXEON Altilon SMD LEDs are not designed to be driven in reverse biasNotes for Table 3:1. Proper current derating must be observed to maintain junction temperature below the maximum, so that the LED is maintained below the maximum rated operating case temperature.
LUXEON Altilon SMD LEDs driven at or above the maximum rated operating case temperature may have shorter lifetime.2. Please consult with Lumileds for more information on maximum time durations and forward currents for these temperatures. 3. Short time operations of less than 200hrs.4. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101).
Notes:1. Drawings are not scale.2. All dimensions are in millimeters.
Mechanical dimensions for LUXEON Altilon SMD 1x2. Mechanical dimensions for LUXEON Altilon SMD 1x3.
Mechanical dimensions for LUXEON Altilon SMD 1x4. Mechanical dimensions for LUXEON Altilon SMD 1x5.
1.06
1.06
2.70 ±0.075*
3.00 ±0.075*
2.21
0.88
CL
2X LIGHT EMITTER
ANGULARITY TOLERANCE2.5 at 2 PLACES
0.84 ±0.075* 0.13 0.13
R0.25 (8x) 0.45 1.00 (2x)
1.05 (2x)
0.50
1.20 (2x) R0.13 (8x)
0.35 1.05 (2x)
LASER MARK0.3x1.1
CATHODE
ANODE
0.84 ±0.075* 0.42
0.13 0.50 1.83 (2x)
1.20 (2x)
0.50
1.05 (2x)
1.76 (2x) 0.65 R0.25 (8x)
R0.13 (8x)
LASER MARK0.3x1.1
CATHODE
ANODE 3.00 ±0.075*
4.51
1.06
1.06
5.00 ±0.075*
0.88
CL
4X LIGHT EMITTER
ANGULARITY TOLERANCE2.5 at 4 PLACES
0.88
B
CL
3X LIGHT EMITTER
ANGULARITY TOLERANCE2.5 at 3 PLACES
3.00 ±0.075*
3.85 ±0.075*
1.06
1.06
3.36
0.84 ±0.075*
CATHODELASER MARK0.3x1.1
ANODE
R0.13 (8x)
0.12
1.20 (2x)
1.63 (2x)
1.05 (2x)
0.55 1.53 (2x)
0.13 0.35
0.50
R0.25 (8x)
0.84 ±0.075* 0.58
0.13
0.50 2.25 (2x)
1.20 (2x)
0.50
1.05 (2x)
0.75 2.13 (2x) R0.25 (8x)
R0.13 (8x)
LASER MARK0.3x1.1
CATHODE
ANODE
5.66
1.06
1.06
6.15 ±0.075*
3.00 ±0.075*
0.88
CL
5X LIGHT EMITTER
ANGULARITY TOLERANCE2.5 at 5 PLACES
Related Documents
