-
Table of Contents
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
1
Revision 1/2003
Lubchem Products Catalog
Valve Lube Sealants .....................................
2Premium Lubricants ................................... 13Valve
Capacity Chart .................................. 17Valve
Maintenance Equipment ................... 19Valve Lubrication
Fittings............................ 27
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
2
Everlast 1Multi-Purpose Lubricant
Everlast 1 is a biodegradable syntheticlubricant for use in
valves carryingaliphatic hydrocarbon liquids and gassesincluding,
kerosene, fuel oils, crudedistillates; sweet or sour, water,
conden-sate, dilute acids and caustics. It iswaterproof and has
excellent resistanceto oxidation and high metal adhesion.Everlast 1
should be used as a hydrocar-bon resistant ball and gate valve
lubricant.Everlast 1 is approved by most major
valvemanufacturers.
ApplicationsFor use in plug, gate and ball valves.Suitable for
use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water resistant Fully additive treated 100% synthetic
High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220-300 Dropping Point, F (D-566)
None Oil Separation, % wt. loss (D-1742)
5 max Oxidation Stability (D-942)
10 max Rust Preventative Test (D-1743)
Pass Temperature Range
-40 to 400F, -40 to 204C Color
Brown Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product CodeEV1
Everlast 1 Winter GradeLow Temp Multi-Purpose
Everlast 1 Winter Grade is a low tempsynthetic lubricant for use
in valvescarrying aliphatic hydrocarbon liquids andgasses
including, kerosene, fuel oils,crude distillates sweet or sour,
water,condensate, LPG systems, dilute acidsand caustics. It is
waterproof, and hasexcellent resistance to oxidation.
ApplicationsDesigned for low torque valve operation incold
environments.For use in gate, plug and ball valves.Suitable for use
in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water resistant Fully additive treated High metal
adhesion Excellent corrosion resistance Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventive Test (D-1743)
pass Temperature Range
Winter Grade -40 to 620oFArctic Grade -70 to 620oF
ColorBrown
Type OilSynthetic
Corrosion InhibitorImidazoline Derivative
EP AdditiveDiester type
Product CodesArctic Grade - EV1AGWinter Grade - EV1WG
Everlast 3High Temp / High Pressure
Everlast 3 is a synthetic lubricant for high-temperature
applications in hydrocarbonservice. Everlast 3 is chemically
resistantto aliphatic liquids and gasses includinggasoline and
kerosene, fuel and lubricatingoils, natural gas and brine water.
Everlast3 is effective at temperatures to 500F andis fortified with
antirust, anti-wear, andcorrosion inhibitors. The unique
additivepackage in Everlast 3 bonds to metalsurfaces reducing the
damaging effects ofcorrosion and scale deposition on criticalvalve
components.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated
High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max Oxidation Stability (D-942)
10 max. Rust Preventative Test (D-1743)
Pass Temperature Range
-10 to 550F Color
Tan Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product CodeEV3
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
3
Everlast 3 WG / AGLow Temp / High Pressure
Everlast 3 is a premium lubricant for high-pressure applications
in low temperaturehydrocarbon service. Everlast 3 isavailable in
both arctic & winter grades. Itis resistant to aliphatic
liquids and gassesincluding gasoline and kerosene, fuel
andlubricating oils, natural gas and brinewater. Everlast 3 AG is
effective totemperatures to -70F and is fortified withantirust,
anti-wear, and corrosion inhibi-tors. The unique additive package
inEverlast 3 bonds to metal surfacesreducing the damaging effects
of corro-sion and scale deposition on critical valvecomponents.
ApplicationsValves in Arctic ClimatesFor use in plug, gate and
ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in
oxygen service
Features 100% synthetic Water resistant Fully additive treated
High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventive Test (D-1743)
Pass Low Temperature Torque (D-1478)
@ -75F (-60C)start 5200 gm-cm10 minutes 3965 gm-cm60 minutes
4225 gm-cm
Temperature RangeWinter Grade -40 to 620oF
Arctic Grade -70 to 620oF Color
GrayProduct CodeArctic Grade - EV3AGWinter Grade - EV3WG
Everlast 4BGate Valve Lubricant Sealant
EVERLAST 4B is a high performancesynthetic valve Lubricant and
sealant forgate valves. The advanced polymers andextreme pressure
additives used in thisproduct make it an excellent choice for usein
high-pressure valves carrying naturalgas, crude oil, condensate and
ethylene.Everlast 4B contains unique solid lubricantadditives that
prevent metal to metalcontact under extreme conditions ofpressure
and temperature.
PerformanceEverlast 4B is a specialized lubricant forclose
tolerance valves and will provideoutstanding lubricity and high
adhesion topolished metal surfaces. This greaseprovides corrosion
protection and iswater-resistant.
Physical Properties Color
Black Temperature Range
-20 F to 450oF Penetration, 25 Deg. C, WKD, 60 STR.150 - 165
Drop Point, Deg. C
None Oxidation Stability, (D-942),
10 max.
Product CodeEV4B
Everlast 4Hydrocarbon Resistant
Everlast 4 is a biodegradable syntheticlubricant formulated for
high chemical andmechanical stability to general hydrocar-bon
service. The synthetic polymer oilsused in Everlast 4 make this an
excellentall purpose plug valve lubricant andsealant for the
oilfield and petrochemicalindustries. Everlast 4 is a blend
ofsynthetic oils for use in valves carrying,LPG, LNG, aliphatic
hydrocarbon liquidsand gasses including, kerosene, fuel oils,crude
distillates; sweet or sour, water,condensate, dilute acids and
caustics. It iswaterproof and has excellent resistanceto oxidation
and high metal adhesion.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon liquids andgassesDO NOT use in oxygen
service
Features 100% synthetic Water resistant Fully additive treated
High metal adhesion Inhibited for H2S
Physical Properties Consistency, Cone Penetration (D-217) 150 to
200 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventative Test (D-1743)
Pass Temperature Range
-40 to 500F Color
Brown Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative
Product CodeEV4
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
4
Everlast 116Multi-Purpose Valve Lubri-cant
Everlast 116 is a high performancemultipurpose, synthetic valve
lubricant andsealant for gate, ball, and plug valves. It
isinsoluble in water, hexane, propyleneglycol. The advanced
polymers used inthis formulation make it an excellent choicefor
valves carrying natural gas, crude oil,condensate and ethylene.
Everlast 116 is aspecialized lubricant for close tolerancevalves
and will provide outstandinglubricity and high adhesion to
polishedmetal surfaces. This grease providescorrosion protection
against CO2 and H2Sand is water-resistant.
ApplicationsFor use in gate valves and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features Fully additive treated 100 % synthetic High metal
adhesion Inhibited for H2S and CO2
Physical Properties Color
White Freeze Point
-50C Temperature Range
-40 to 400F Penetration, 25C, wkd, 60 strokes
230 to 240 Drop Point, C
None Oxidation Stability, (D-942)
10 max. Specific Gravity @25C
1.08
Product Code116
Everlast 117EP Valve Lubricant
Everlast 117 is an extreme pressuresynthetic valve lubricant and
sealant forgate, ball, and plug valves. Everlast 117 isdesigned for
use in close tolerance valvesand will provide outstanding lubricity
andreduced operating torque. Extensivelaboratory evaluation has
shown Everlast117 to reduce operating torque by up to50%. The
additive package in this productprovides excellent antioxidant,
extremepressure and anti-wear properties andshould be used where
extreme pressuresprevail.
ApplicationsFor use in gate valves, plug and ballvalves.Suitable
for use in hydrocarbon gasses,water, CO2 and H2SDO NOT use in
oxygen service
Features Fully additive treated 100 % synthetic High metal
adhesion Inhibited for H2S and CO2
Physical Properties Color
Yellow to Brown Temperature Range
-50 to 450F Penetration, 25C, wkd, 60 strokes
170 to 180 Drop Point, C
None Oxidation Stability, (D-942)
10 max. Specific Gravity @25C
.98
Product Code117
Everlast 118High Temp Valve Lubricant
Everlast 118 is a high temperature,synthetic valve lubricant and
sealant forgate, ball, and plug valves. This product isthermally
stable to 600oF. It is a hydrocar-bon resistant lubricant for use
in methane,ethylene, propane, crude oil and diesel.This grease
provides corrosion protectionagainst CO2 and H2S and is
water-resistant.
ApplicationsFor use in high temperature gate valvesand ball
valvesSuitable for use in hydrocarbon gasses.DO NOT use in oxygen
service
Features Fully additive treated 100 % synthetic High metal
adhesion Inhibited for H2S and CO2
Physical Properties Color
Dark Grey to Black Temperature Range
-40 to 600F Penetration, 25C, wkd, 60 strokes
220 to 230 Drop Point, C
None Oxidation Stability, (D-942)
10 max. Specific Gravity @25C
1.02
Product Code118
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
5
Everlast 146Hydrocarbon Resistant
Everlast 146 is a synthetic lubricantformulated for high
chemical and mechani-cal stability to general hydrocarbonservice.
The synthetic polymer oils used inEverlast 146 make this an
excellent allpurpose gate valve lubricant and sealantfor the
oilfield. Everlast 146 is a blend ofsynthetic oils for use in
valves carrying,LPG, LNG, aliphatic hydrocarbon liquidsand gasses
including, kerosene, fuel oils,crude distillates; sweet or sour,
water,condensate, dilute acids and caustics. It iswaterproof and
has excellent resistanceto oxidation and high metal adhesion.
ApplicationsFor use in gate valvesSuitable for use in
hydrocarbon liquids andgassesDO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated
High metal adhesion Inhibited for H2S
Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventative Test (D-1743)
Pass Temperature Range
-40 to 500F Color
Brown Type Oil
Synthetic Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product Code146
Everlast 620For High Pressure PlugValves
Everlast 620 is a high performance,synthetic valve Lubricant and
sealant forball, plug and gate valves. The advancedpolymers and
extreme pressure additivesused in this product make it an
excellentchoice for use in high-pressure valvescarrying natural
gas, crude oil, condensateand ethylene. Everlast 620 contains
uniquesolid lubricant additives that prevent metalto metal contact
under extreme conditionsof pressure and temperature. This
producthas been tested and found to preventgalling at pressures to
20,000 psi.
PerformanceEverlast 620 is a specialized lubricant forclose
tolerance valves and will provideoutstanding lubricity and high
adhesion topolished metal surfaces. This greaseprovides corrosion
protection and iswater-resistant.
Typical Properties Appearance
White Temperature Range
-20 to 450oF Penetration, 25 Deg. C, WKD, 60 STR.150 - 165 Drop
Point, Deg. C
None Oxidation Stability (D942),
10 max.
Product Code620
Everlast 1000High Temperature ValveLube
Premium synthetic oils and inorganicthickeners make Everlast
1000 a hightemperature, non-melting lubricant/sealantfor valves in
geothermal, petroleumrefineries and natural gas plants. This
hightemperature lubricant/sealant is formulatedfor resistance to
aliphatic hydrocarbons,including gasoline, kerosene,
propane,butane, natural gas, steam, hot oil, diluteacids and
caustic solutions. Everlast 1000is an excellent moly/graphite type
anti-seize compound and should be used toprotect threaded
connections from galling,and wear. Everlast 1000 converts to a
dryfilm lubricant at elevated temperatures andwill not harden.
Features Non melting Converts to a solid film lubricant Contains
molybdenum disulfide (moly)
Physical Properties Consistency, Cone Penetration (D-217)
200 to 230 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max Flash Point COC, C (F),
243 (470) Fire Point COC, C (F)
307 (585) Density, lb./gal
7.85 Evaporation Loss 10 hours at 210F
(D-972) 0.10 Temperature Range
-20 to 1000F
Product CodeEVK
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
6
Everlast 50-400 High ViscPlug Valve H2S - CO250-400 is a high
viscosity valve lubricantsealant that meets Mil-G-6032 GreasePlug
Valve, Gasoline & Oil Resistant. 50-400 is designed for use in
plug valves as alubricant sealant. 50-400 is resistant toorganic
acids, caustic solutions and isinhibited for use in H2S and CO2.
Thisproduct has excellent dual resistance towater and aliphatic
hydrocarbons such asgasoline, jet fuel, lubricating oils,
organiccondensates and mixtures of theseproducts. 50-400 can be
used in a widevariety of applications from the wellheadto product
pipelines.
ApplicationsFor use in plug valvesSuitable for use in
hydrocarbon gasses.DO NOT use in oxygen service.
Features Water insoluble and washout resistant Fully additive
treated 100 % synthetic High metal adhesion Inhibited for H2S and
CO2
Physical Properties Consistency, Cone Penetration (D-217)
250 - 265 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 Max Oxidation Stability, (D-942)
10 Max Rust Preventive Test (D-1743)
Pass Temperature Range
-15 to 400F Corrosive Inhibitor
Imidazoline Derivative EP Additive
DiesterType
Product Code50400HV
Everlast WRSevere Corrosive Service
Lubricant for use in valves carrying CO2,H2S, NGL, methanol,
crude oil, producedwaters, strong acids, natural gas, andfuels,
where extreme temperature swingsmay occur. Everlast WR is highly
chemicalresistant, has a wide temperature rangeand is fortified
with antirust, anti-wear,and corrosion inhibitors. The
uniqueadditive package in Everlast WR bonds tometal surfaces
reducing wear and thedamaging effects of corrosion due toorganic
acid attack.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Fully additive treated
High metal adhesion Inhibited for H2S and CO2
Physical Properties Color
Black Cone Penetration
250 to 270 Dropping Point, 5 (ASTM D-566)
None Water Washout ASTM D-1264) 1hr @105F - 0.1% Rust
Preventative Test (ASTM D-1743)Pass Film Stability and Steel
Corrosion,
Mil-G-27617D 168 @ 212FNo resinous deposit or corrosion
Temperature Range-70 to 600F
Type OilSynthetic
Product CodeEVWR
Everlast 50-300Low Temperature H2S /CO2Everlast 50-300 is a
synthetic valvelubricant/sealant formulated for use inhighly
corrosive, low temperature ser-vices. 50-300 should be used in
plugvalves and ball valves handling drygasses including natural
gas, manufac-tured gas and LP gasses, carbon dioxide,sour crude and
gas, salt water, hydrocar-bons, acids or caustic solutions.
50-300is a tenacious filmer to metal surfaces andwill protect valve
parts from the corrosiveeffects of oil and gas production
andprocessing. 50-300 is excellent body fillerin gate valves where
hydrocarbonresistance is important and corrosionprotection is
critical.
ApplicationsFor use in plug, ball and gate valves in
lowtemperature environments.Suitable for use in hydrocarbon
gasses.DO NOT use in oxygen service.
Features Outstanding low temp performance Water insoluble and
washout resistant Fully additive treated 100 % synthetic High metal
adhesion Excellent corrosion resistance
Physical Properties Consistency, Cone Penetration (D-217)
220 to 260 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss, (D-1742)
5 max Oxidation Stability, (D-942)
10 max Rust Prevention, (D-1743)
Pass Temperature Range
-50 to 300F Color
Dark Gray Corrosion Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product Code50300
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
7
Everlast 50-400H2S & CO2 Ball & Gate Valve
50-400 is a dual-purpose valve lubricant/sealant that meets
Mil-G-6032 GreasePlug Valve, Gasoline & Oil Resistant. 50-400
is designed for use in plug valves as asealant and in ball and gate
valves as alubricant. 50-400 is resistant to organicacids, caustic
solutions and is inhibited foruse in H2S and/or CO2. This product
hasexcellent dual resistance to water andpetroleum products such as
gasoline, jetfuel, lubricating oils and mixtures of theseproducts.
50-400 can be used in a widevariety of applications from the
wellheadto product pipelines.
ApplicationsFor use in plug, ball and gate valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service.
Features Water insoluble and washout resistant Fully additive
treated 100 % synthetic High metal adhesion Excellent corrosion
resistance Inhibited for H2S and CO2
Physical Properties Consistency, Cone Penetration (D-217)
250 - 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 Max Oxidation Stability, (D-942)
2 @ 100 hours Rust Preventive Test (D-1743)
Pass Temperature Range
-40 to 400F Corrosive Inhibitor
Imidazoline Derivative EP Additive
Diester Type
Product Code50400
102 Special Peanut ButterType - Standard & Creamy
Recommended for properly sealing WKMtype gate valves handling
water, gas andcondensate, oil petroleum products suchas gasoline,
butane, hydrocarbon vapors,ammonia, glycerin, solvents and sour
gas.102 Special is available in creamy andstandard grades.
Physical Properties Appearance
Light brown with a characteristic odor Density
9.35 9.55 lb. / gal. Oil Separation
will not occur Corrosion Inhibitor
Imidazoline EP Additive
Diester type Temperature Range
-30 to + 250F
Availability102 Special is available in creamy andstandard
grades please specify yourchoice when ordering.
Product CodeStandard Grade - SVDCreamy Grade - SVC
196 Sealant - For McEvoyValves Regular Grade
196 Special should be used in bothreservoirs in McEvoy gate
valves to insuresealing, dependability and easy
operation.Recommended for properly sealing valvesthat handle gas
and condensate, oils,butane, gasoline, ammonia, glycerin andsour
gas. Use Lubchem 196 Sealant forleak proof trouble free service in
McEvoy,WKM and other gate valves. Recom-mended temperature range
-30F to +250F
Physical Properties Appearance
Tan with a characteristic odor Density
9.35 9.55 lb. / gal. Oil Separation
Will not occur Corrosion Inhibitor
Imidazoline EP Additive
Diester type
Product CodeM196
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
8
Formasil HD - Valve Sealant
Synthetic sealant for use in valvescarrying natural gas, crude
oil sweet orsour, water, condensate, dilute acids andcaustics. It
is waterproof and hasexcellent resistance to oxidation and
highmetal adhesion. Formasil HD should beused as a hydrocarbon
resistant ball andgate valve sealant or as a plug
valvelubricant/sealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion
Inhibited for H2S Temperature Range -40 to 400F
Product CodeFHD
Formasil H2O - Valve Sealant
For high-pressure gate valve applicationsin hydrocarbon service.
Formasil H2O ischemically resistant to aliphatic liquids andgasses
including gasoline and kerosene,fuel and lubricating oils, natural
gas andbrine water. Formasil H2O is effective attemperatures to
400F and is fortified withantirust, anti-wear, and corrosion
inhibi-tors.
ApplicationsFor use in plug, gate and ball valvesDrilling choke
manifoldsHigh Pressure Gate ValvesSuitable for use in hydrocarbon
gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Inhibited for H2S
Excellent sealing capabilities Temperature Range 0 to 400 F
Product CodeFH2O
Formasil WR - Valve Sealant
For use in valves carrying hot air, steam,CO2, H2S, NGL,
methanol, crude oil,produced waters, strong acids, naturalgas, and
fuels, where extreme tempera-ture swings may occur. Formasil WR
ishighly chemical resistant, has a widetemperature range and is
fortified withantirust, anti-wear, and corrosion inhibi-tors.
ApplicationsValves in Arctic ClimatesFor use in plug, gate and
ball valvesSuitable for use in hydrocarbon gasses.DO NOT use in
oxygen service
Features 100% synthetic Water resistant High metal adhesion
Inhibited for H2S Temperature Range -55 to 450F
Product CodeFWR
Formasil RG - Valve Sealant
Formasil RG is a general purpose syntheticsealant for use in
valves carrying naturalgas, crude oil sweet or sour,
water,condensate, dilute acids and caustics. Itis waterproof and
has excellent resis-tance to oxidation and high metal
adhesion.Formasil RG should be used as a hydro-carbon resistant
ball and gate valvesealant or as a plug valve
lubricant/sealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion
Inhibited for H2S Temperature Range -40 to 400F
Product CodeFRG
Formasil RS - Valve Sealant
Synthetic sealant for use in valvescarrying natural gas, crude
oil sweet orsour, and water. It is waterproof and hasexcellent
resistance to oxidation and highmetal adhesion. Formasil RS should
beused as an emergency sealant in ball andgate valves or as a plug
valve lubricantsealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant High metal adhesion
Excellent corrosion resistance Inhibited for H2S Temperature Range
0 to 400F
Product CodeFRS
Formasil RS Winter GradeSealant
Formasil RS Arctic is a low temperature,synthetic sealant for
use in valvescarrying natural gas, crude oil sweet orsour, and
water. It is waterproof and hasexcellent resistance to oxidation
and highmetal adhesion. Formasil RS Arctic shouldbe used as an
emergency sealant in balland gate valves or as a plug
valvelubricant/sealant.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.DO NOT use in oxygen service
Features 100% synthetic Water resistant Inhibited for H2S
Temperature Range -40 to 400F
Product CodeARS
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
9
TFE SealValve Stem Packing
A pumpable packing and sealant containinghigh temperature
proprietary fillers in ablend of synthetic oils. Recommended foruse
in high temperature hydrocarbonservice, steam, and hot oil
services. TFESeal #1 contains fine to medium size fillerparticles.
TFE Seal #2 contains medium tolarge filler particles.
Principle Service High chemical and mechanical stability Good
lubricity High temperature fillers EP Additives Oxidation and
corrosion inhibitors
ApplicationPumpable with high pressure grease gun.Do not use in
oxygen service.Temperature Range 0 to 250FColor - Brown
Product Codes1900
Formasil CO2 - Winter Grade
Synthetic valve sealants formulated foruse in highly corrosive,
low temperatureservices. This product should be used toseal leaking
plug valves and ball valveshandling carbon dioxide, sour crude
andgas, salt water, hydrocarbons, acids orcaustic solutions.
ApplicationsFor use in plug, ball and gate valves in
lowtemperature environments.Suitable for use in hydrocarbon
gasses.DO NOT use in oxygen service.
Features Outstanding low temp performance 100% synthetic High
metal adhesion Excellent sealing capabilities Inhibited for H2S
Temperature Range -40 to 500F
Product CodeFSCW
Formasil CO2- Sealant
Valve lubricant/sealant that meets Mil-G-6032 Grease Plug Valve,
Gasoline & OilResistant. Formasil CO2 is designed foruse in
gate valves as a lubricant/sealantand in ball and plug valves as a
sealant.Formasil CO2 is resistant to acids, causticsolutions and is
inhibited for use in H2Sand/or CO2. This product has excellentdual
resistance to water and petroleumproducts such as gasoline, jet
fuel,lubricating oils and mixtures of theseproducts. Formasil CO2
can be used in awide variety of applications from thewellhead to
pipelines.
Features Water insoluble and washout resistant 100% synthetic
Inhibited for H2S and CO2 Temperature Range 15 to 400 F
Product CodeFCO2
Lunaseal 1Valve Stem Packing
Lunaseal is a unique pumpable packingand sealant compound
containing millionsof micron size fillers and graphite
fibers.Lunaseal packing is formulated forhydrocarbon service in low
temperatureapplications and is resistant to acid andcaustic
solutions, steam and mostchemicals.
ApplicationPumpable with high pressure (10,000 PSI)grease gun.Do
not use in oxygen service.Temperature Range -65 + 500FColor - Gray
to Black
Product Code1300
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
10
Lubchem V-CleanLiquid Valve Cleaner
Lubchem V-Clean is a complex blend ofsurfactants, dispersants
and wettingagents designed to thoroughly cleanclogged sealant
pathways in ball, plug andgate valves. V-Clean will lift deposits
ofoils, greases (hydrocarbon & synthetic),salts, asphaltines,
paraffin, and other soliddebris (including corrosion products)
fromthe surface of the metal. V-Clean willdisplace water and hold
the debris insuspension allowing it to be flushed fromthe system
using a Lubchem V-Clean FlushPump or other suitable pumping
equipment.
Application GuidelinesV-Clean should be used as supplied,
nodilution is necessary. V-Clean should bepumped into the valve at
a rate sufficientto force the liquid into contact with theentire
surfaces to be cleaned. The volumeof V-Clean required per cleaning
job variesdepending upon valve condition and size.However, to
estimate chemical require-ments use approximately 1 quart of
V-Clean per 4 inches of the diameter of thevalve for plug valves /
per seat for ballvalves. For gate valves use a sufficientquantity
to fill the valve body and flush theseats when possible. The
reaction timefor deposit removal varies by deposit, as ageneral
rule allow the product about 15minutes to dissolve the deposit,
repeat theprocedure until the desired performance isobtained.
Typical Properties:Color/Odor ................. Amber Liquid /
MildFlash Point, F .................................... >200pH
..........................................................
12Solubility:Water ............................................
SolubleOil ............................................
Dispersible
V-Clean is available in:Part Number
............................. PackagingVC21 ......................
6/1gal. plastic bottlesVC29 ................. 5 gal. pail w/ pour
spout
Valve SaverValve Cleaner
Valve Saver is a combination valve cleanerand penetrating
lubricant engineered tofree up and clean out difficult or
impos-sible to operate lubricated valves.Lubchems Valve Saver
penetrates andcleans residual gum, lacquer, hardenedsealants and
lubricants. Valve Saver alsopenetrates and loosens rust and
corrosiondeposits extending the life and perfor-mance of all types
of lubricated valves.When used regularly it will preventadditional
build up.
Features Compatible with all valve lubricants Cuts residual gum
and lacquer deposits Removes rust and corrosion Do not use in
oxygen service Temperature Range -40 to 400oF
Application ProcedureApply Lubchem Valve Saver with
conven-tional lubricating equipment. Turn valveslowly and repeat
the process until valveopens freely. After the valve is
operable,lubricate with one of Lubchems highquality valve
lubricants.
Product CodeVSB
Valve Saver AWValve Cleaner / lubricant
Valve Saver AW is a combination valvecleaner and lubricant
designed to lubricateand clean deposits common to valves inpipeline
& production valves. Valve SaverAW can be used as a valve
cleaner andas a lubricant. Valve Saver AW consists ofa premium
quality Anhydrous Calcium basegrease, blended with a proprietary
additivepackage that includes a dispersant /surfactant. This unique
compound willlubricate the valves internal componentsand, at the
same time, emulsify a variety oforganic and organometallic
compoundscommon to pipeline operations. Whenused regularly it will
prevent additionalbuild up of pipeline contaminants. Theanhydrous
calcium base grease providesgood lubrication qualities over a
widetemperature range of -65 to 250oF.
Valve Saver AW is compatablewith the following
elastomers:Polytetrafluoroethylene, Teflon,Perfluoroelastomer,
Kalrez, Chemraz, TFE-PVDF-Terpolymer rubber, Viton,
Fluorel,Chlorinated Butyl Rubber & ButadieneRubber, Butyl
Rubber, Ethylene PropyleneRubber, Ethylene Propylene Diene
Rubber,Vistalon, Nordel, Nitrile Rubber, Hycar,Buna-N, Natural
Rubber, Butadiene Rubber,Isoprene Rubber, Epichlorohydrin
copoly-mer rubber, Epichlorohydrin terpolymerrubber, Polysulfide
rubberChlorosulfonated Polyethylene rubber
Features Compatible with all valve lubricants Cuts gum and
lacquer deposits Penetrates rust and corrosion Do not use in oxygen
service Temperature Range -40 to 400oF
Product CodeVSAW
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
11
Anti-Seize 2200Stem & Thread Compound
Anti-Seize 2200 is a special blend ofgraphite and micro-size
aluminum flakeparticles homogenized into a highlyviscous carrier
which volatilizes at hightemperatures. It is non-melting
andprovides superior protection againstgalling, corrosion and heat
freeze. Anti-Seize 2200 prevents metal to metal contactunder severe
variations of temperature,cyclic loading and pressure. It
withstandshigher temperatures than copper basedcompounds and will
not drip or run. It willprovide clean break-outs from high
torqueand is very economical to use.
Features Temperature range
-65 to 2200oF-54 to 1204oC
Anti-Seize 2200 is available in:Part No.
.................................. Container13111 ................
24-8 oz. brush top cans13117 ............. 12-16 oz. brush top
cans13123 ....................................... 10 lb. pail13135
........................... 5 gal. / 40 lb. pail
MOLY-VAPDry Moly Thread Compound
Moly-Vap is a dry film lubricant containingMolybdenum Disulfide
which will withstandbroad temperature and pressure limits. Drymoly
film has a low coefficient of frictionand provides excellent
lubricating proper-ties without the attraction of dust and
dirtwhere oils and greases would beunsuitable. The carrier solvent
in thisformulation drys quickly bonding thetenacious solid Moly-Vap
coating toferrous and nonferrous metals. Moly-Vapresists water,
oils, alkali and most acids. Itcontains corrosions inhibitors and
willprevent corrosion to parts during extendedstorage periods.
FeaturesMoly-Vap prevents friction, fretting, wear,sticking,
galling, seizing, binding andchattering.
Moly-Vap is available in thesesizes:Part No.
................................... Container15112 ....... 12 oz.
aerosol / 12 per case15119 .............. 4 - 1 gal. Cans per
case15145 ..................................... 5 gal. Can
-
Ordering Information
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
12
Lubchem valve lube sealants are available inindustry standard
stick and bulk packagingas follows:
102 Sealant & 196 Sealant - are available in bulk
packagingonly.Everlast Products - are available in both stick and
bulk packag-ing.Formasil Products - are available in bulk packaging
only.
Ordering InstructionsProduct Selection & Part Number
Identification:
Lubchem valve lube sealants are identified by individual
productcodes. The product code for each product is listed in
thiscatalog at the bottom of the each products description. Whenyou
have selected a product make note of the product code.
Lube Sealant Packaging Selection:
Now that you have selected a product, select the packagingoption
from the tables below and add the package code to theend of the
product code. For example, Everlast 4 packaged inone 40 pound pail
would be part number EV440.
Package Sticks per Code inches mm inches mm Box / Carton
A 1/ 4 6.35 1 1/ 2 38.1 48B 3/ 8 9.53 1 1/ 2 38.1 24C 7/ 16
11.11 2 1/ 8 53.98 24D 1/ 2 12.7 2 5/ 8 66.68 24G 5/ 8 15.88 3 1/ 2
88.9 24J 1 3/ 8 34.93 8 1/ 2 215.9 16K 1 1/ 2 38.1 10 1/ 2 266.7
12
Diameter LengthStick Size
Stick Lube Sealant Packaging OptionsPackage Container
Recommended
Code Size PumpC10 16 ea. 10oz. Cartridges 1000 Lube PumpC14 10
ea. 14oz Cartridges 1200 or 1500 Lube Pump10 10 lb. Pail Force Flow
100 or 5040 40 lb. Pail FF100, 35-50 or 45-100120 120 lb. Drum
C-1207786 Drum Pump130 130 lb. Drum C-1207786 Drum Pump420 55 Gal.
420 lb. Drum C-55-7786 Drum Pump510 55 Gal. 510 lb. Drum C-55-7786
Drum Pump
Bulk Lube Sealant Packaging Options
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
13
Longlife 1600 AArctic Grade Lubricant
Suitable for use as a low temp gate valvebody filler or as a
ball valve lubricant.Longlife 1600 is a low temperaturemultipurpose
water insoluble grease thatwill provide low torque operation in
verycold operating environments. It containsa proprietary
anti-galling additive andcorrosion inhibitor designed to
protectseat rings, springs and sealing surfacesfrom the corrosive
effects of oil and gasproduction and processing.
ApplicationsFor use in ball and gate valves in lowtemperature
environments.Suitable for use in hydrocarbon gasses.DO NOT use in
oxygen service.
Features Outstanding low temp performance. Water insoluble and
washout resistant. Fully additive treated. Premium quality lithium
12-hydroxy
stearate grease. Superior protection to lubricate a wide
variety of heavy-duty equipment. Low Staining
Physical Properties NLGI No.2 Thickener Anhydrous Calcium
Temperature Range
-75 F to 350 F Color/Texture
Gray/Smooth Adhesive Rust Prevention, D-1743, rating
Pass Worked 60 Penetration, D-217
265-295 Dropping Point, D-566 F
365 Oil Separation, D-1742,
% loss 5 Timken OK Load, D-2509, lb
45 Four-Ball Wear, D-2266, mm
0.56 Four-Ball EP Weld Point, D-2596,
kgf, 315
Product CodeBPA
Longlife 1600Multi-Purpose Lubricant
Premium 12-hydroxy stearate com-pounded with a premium additive
systemmakes this an excellent multipurposegrease with a broad
temperature range.This product is water insoluble, washoutresistant
and fully additive treated withcorrosion inhibitors, extreme
pressureadditives and oxidation inhibitor addi-tives. It is an
excellent choice wherewater resistance and a light valve greaseis
recommended.
ApplicationsFor use in Ball Valves & Gate Valves asa body
filler.Protects seat rings and springs.Suitable for use in water
and naturalgas services.DO NOT use in oxygen service.
Features Water insoluble and washout resis-tant. Fully additive
treated. Premium quality lithium 12-hydroxy
stearate multipurpose grease. Superior protection to lubricate a
wide
variety of heavy-duty equipment.
Physical Properties NLGI No.2 Temperature Range
5 to 350 F Color/Texture
Tan/Smooth Worked 60 Penetration, D-217
265-295 Timken OK Load, D-2509, lb.
45 Four-Ball Wear, D-2266, mm
0.40 Four-Ball Weld Point, D-2596, kgf
250
Product CodeLL16
Longlife 1603 - Multi-PurposeLubricant
Longlife 1603 is an economical multipur-pose grease especially
suited for normaloperating temperatures and othernoncritical
service applications. 1603 isan excellent corrosion inhibiting
greaseand recommended for applicationsrequiring frequent
re-greasing due tocontaminating environments. Thisproduct is water
insoluble, washoutresistant and fully additive treated
withcorrosion inhibitors, extreme pressureadditives and oxidation
inhibitor addi-tives. It is an excellent choice where aneconomical
valve grease is recom-mended.
ApplicationsFor use in Ball Valves & Gate Valves asa body
fillerProtects seat rings and springsSuitable for use in water and
cleannatural gas servicesDO NOT use in oxygen service.
Features Water resistant Fully additive treated Multipurpose
grease
Physical Properties NLGI No.2 Temperature Range
0 to 265 F Color/Texture
Dark Brown Worked 60 Penetration, D-217
265-295 Dropping Point, D-566 F, (C)
375 (191) Texture
Smooth, medium fiber
Product CodeLL1603
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
14
LZ-11Silicone Lubricant
LZ-11 is a highly purified siliconelubricant that resists
deterioration bychlorides, solvents, acids, low-pressuresteam, and
condensate. LZ-11 isdesigned for use on plug valves, gatevalves
butterfly valves, swivel joints,mechanical seals and packing,
andflexible ball joints exposed to harshchemical environments. It
is also anexcellent lubricant for rubber and plastico-rings,
sealing vacuum and pressuresystems.
ApplicationsFor use in plug, gate and ball valvesSuitable for
use in hydrocarbon gasses.Mechanical seals and packingFlexible ball
jointsO-rings and seals
Physical Properties Consistency, Cone Penetration (D-217)
220 to 300 Dropping Point, F (D-566)
None Oil Separation, % wt. Loss (D-1742)
5 max. Oxidation Stability (D-942)
10 max. Rust Preventive Test (D-1743) rating
Pass Low Temperature Torque (D-1478)
@ -75F (-60C)start 5200 gm-cm10 minutes 3965 gm-cm60 minutes
4225 gm-cm
Flash Point610F
Temperature Range-40 to 400F
ColorClear White
Type OilSilicone
Product CodeLZ11
Longlife Moly LTHeavy Duty Moly Lubricant
Longlife Moly LT - EP Grease is a fullyadditive-treated,
multipurpose greasethat is water insoluble and treated forextra
protection. It contains antirust, anti-wear, extreme pressure, and
antioxidantadditives. It is a good quality molybde-num disulfide
compounded low tempera-ture grease, also treated with
solublechemical additives to prevent wear,especially under very
highly loadedconditions. Use Longlife Moly LT in lowtemperature
applications where mediumto severe conditions prevail.
FeaturesWater insoluble and washout resistantFully additive
treatedExcellent low temperature performance
Physical Properties NLGI No.2 Thickener
Anhydrous Calcium Texture
Smooth, but slight fiber Color, Observed
Gray Worked 60 Penetration, D-217
265-295 Dropping Point, D-566, F. (C.)
285 (140) Wheel Bearing Leakage, D-1263, rating
Pass Oil Separation, D-1742,
% loss 5 Timken OK Load, D-2509, lb.
45 Rust Prevention, D-1743, rating
Pass Oxidation Stability, (D-942) psi drop
4.0 at 100 hr. Approximate Temperature Range,
-65oF to 280oF
Product CodeLMLT
Longlife MolyHeavy Duty Moly Lubricant
Longlife Moly - 3% Moly-Lithium. EPGrease is a fully
additive-treated,multipurpose grease is water insolubleand is
treated for extra protection. Itcontains antirust anti-wear,
extremepressure, and antioxidant additives. It isa good quality
molybdenum disulfidecompounded multipurpose grease, alsotreated
with soluble chemical additives toprevent wear, especially under
veryhighly loaded conditions. Use LonglifeMoly in general purpose
applicationswhere medium to severe conditionsprevail. Meets
Caterpillar requirementsfor 3% molybdenum disulfide, lithiumsoap
grease.
FeaturesWater insoluble.Fully additive treated.Meets Caterpillar
requirements for 3%molybdenum disulfide, lithium soapgrease.
Physical Properties NLGI No.2 Thickener
Lithium Stearate Texture
Smooth, but slight fiber Fillers
3% Molybdenum disulfide Color, Observed
Grey Worked 60 Penetration, D-217
265-295 Dropping Point, D-566, F. (C.)
340 (171) Wheel Bearing Leakage, D-1263,
Pass Oil Separation, D-1742,
% loss 3.8 Rust Prevention, D-1743, rating
Pass Oxidation Stability, (D-942) psi drop
5.0 at 100 hr. Temperature Range
-5oF to 280oF
Product CodeLLM
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
15
Longlife SRL-50Sucker Rod Lubricant
Longlife SRL-50 is engineered to protectthe threads of sucker
rod connectionsunder severe operating conditions ofhigh cyclic
loading. SRL-50 is a hightemperature, lithium complex EP greasewith
excellent low temperature proper-ties. SRL-50 is a unique blend
ofpetroleum base oils and synthetic fluidsproviding excellent
resistance to oxida-tion at elevated temperatures withexceptional
performance under extremelow temperature conditions. SRL-50contains
EP/antiwear additives, rust andoxidation inhibitors that provide
superiorprotection form thread galling in suckerrod
connections.
Application:Clean the connection prior to make up.Apply a thin
coat of SRL-50 to thethread. CAUTION: Do not lubricate thepin
shoulder face or the couplingshoulder face or a loss of tightness
canoccur resulting in a connection failure.
Physical Properties: NLGI
No.2 Color/Texture
Blue/Smooth Unworked Penetration, D-217
265-295 Worked 60 Penetration, D-217
265-295 Oxidation Stability, (D-942) psi drop
2.5 @ 100 hr. Oil Separation, D-1742, % loss
1.0 Timken OK Load, D-2509, lb.
70 Four-Ball Wear, D-2266, mm
0.45 Four-Ball Weld Point, D-2596, kgf
315 Dropping Point, (D-2265), F, (C)
550 (288) Temperature Range, F, (C)
-65oF to 356oF, (-54 to 180)
Product CodeSRL50
Longlife 1200Synthetic Hydrocarbon Grease
Longlife 1200 is a multipurpose syntheticgrease developed for
high speed turbineengine bearings and conforms to Mil-G-81322E. It
has excellent long life andantirust properties for service
tempera-tures ranging from -80oF to 400oF. It canbe operated to
600oF, depending uponspeed and load, environmental factors,and
relubrication frequency.
Application:Longlife 1200 is highly recommended foruse in a wide
range of industrial equip-ment. Use on sheathed cables,
O-rings,seals, gears, ball, roller, and plainspherical bearings. It
is especiallysuitable for use in plastic and/or metalgearboxes
where service temperaturerange and minimal evaporative lossesare
critical.
Physical Properties: NLGI:
No.2 Color/Texture:
Tan/Smooth Unworked Penetration, D-1403:
270 Worked 60 Penetration, D-1403:
285 Worked Stability, FED-STD-791,
Method 313 @ 100,000 strokes:310
Oxidation Stability, (D-942) psi drop:100 hr. @ 212oF, -2.5
psi500 hr. @ 212oF, -9.0 psi
Oil Separation, FED-STD-791,Method 321:30 hr.@ 212oF, 0.80%30
hr.@ 350oF, 3.50%
Dropping Point, (D-2265), F, (C)550 (288)
Evaporation, D-2595:22 hr. @ 210oF, 0.50%22 hr. @ 350oF,
5.40%
Dirt Count, FED-STD-791, Method3005:10-75 microns, 65/ccover 75
microns, 0/cc
Rubber Swell, FED-STD-791, Method3603, L stock 168 hrs. @
158oF:4.0%
Rust Preventive Properties D-1743, 48hrs. @ 125oF:1
Longlife 1200 (cont.)
Load Wear Index, ASTM D-2596,@ 77oF: 48.0Last Non-seizure, (Load
/ Wear Scar):100kg/0.454 mm7Last Seizure (Load / Wear
Scar):126kg/2.590 mmWeld Point (Load):250 kg
Steel-on-Steel Wear, ASTM D-2266,(52100 steel),1200 rpm, 40 kg,
2 hrs. @ 167oF:0.7 mm1200 RPM, 40 kg, 2 hrs. @ 350oF:0.8 mm
Coefficient of Friction, 1200 RPM, 90oF,15 kg load:0.09
Gear Wear, FED-STD-791, Method 335,1000 cycles:5 lb load, 0.68
mg10 Lb load, 1.60 mg
High Temp. Performance,ASTM D-3336:300o F, 10,000 rpm, 50 lb,
2,500 hrs +350o F, 10,000 rpm, 50 lb, 525 hrs350o F, 10,000 rpm, 5
lb, 1,000 hrs +400o F, 10,000 rpm, 50 lb, 264 hrs
Low Temperature Torque,ASTM D-1478:@ -65oF, starting, 1,534
g-cmrunning, 649 g-cm
Corrosion on Copper:24 hrs @ 212oF, 1a no stain
Product CodeLL1200
-
Lubchem Premium Lubricants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
16
Ordering InstructionsProduct Selection & Part
NumberIdentification:
Lubchem premium lubricants areidentified by individual product
codes.The product code for each product islisted in this catalog at
the bottom of theeach products description. When youhave selected a
product make note ofthe product code.
Lubricant Packaging Selection:
Now that you have selected a product,select the packaging option
from thetables below and add the package codeto the end of the
product code. Forexample SRL-50 packaged in one 40pound pail would
be part numberSRL5040.
Package Code ContainerA 12 ea. 14 oz. Aerosol Cans
C10 16 ea. 10oz. CartridgesC14 10 ea. 14oz Cartridges10 10 lb.
Pail104 4 ea. 10 lb. Pails40 40 lb. Pail120 120 lb. Drum420 55 Gal.
420 lb. Drum
Lubricant Packaging Options
Longlife 1607High-Temp Multi-Purpose
Longlife 1607 is a multi-purpose syntheticgrease combined with a
dropping point of550oF for application over a wide tempera-ture
range. Longlife 1607 grease exhibitsa Tmiken OK Load in excess of
80 poundsand excellent Four-Ball Wear and EPperformance. This
product will providesuperior protection to lubricate a widevariety
of automotive, trucking, mining,construction and industrial
equipment withexcellent performance in severe applica-tions and
unequaled shock load protection.
Application:Longlife 1607 is highly recommended fordisk brake
wheel bearings, fan hubs,backhoe hinge pins, oven conveyorbearings
and other heavily loaded and/orhigh speed industrial
application.
Physical Properties: NLGI:
No.2 Color/Stringy:
Red/Smooth Worked 60 Penetration, (D-217):
265-295 Oxidation Stability, (D-942) psi drop:
2 psi @ 100 hours Oil Separation, (D-1742):
% loss - less than 1 Dropping Point, (D-2265), F, (C):
550 (288) Rust Preventive Properties (D-1743):
Pass Copper Corrosion, (D-4048), rating:
Pass Timken OK Load, (D-2509):
80 lb. Four-Ball Wear, (D-2266), mm:
0.45 Four-Ball Weld Point, (D-2596), kgf:
315 Four-Ball Load Wear Index, (D-2596) kgf
50 Four-Ball Last Nonseizure, (D-2596) kgf
80 Temperature Range, F (C)
-10 to 325 (-23 to 163)
Product CodeLL1607
-
Valve Capacity Chart
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
17
The capacities listed in this chart are based upon the valve
manufacturers recommendation for thequantity of sealant required
per seat. For more information please consult the valve
manufacturersmaintenance manual or your local Lubchem
representative.
Size Grove Nordstrom KF Series FA KF Series T
1/23/41
1 1/223468
101214161820222426283032343638404248
----2234569
101118202223262730-
3342-
6567102
-------33444558
101012131414151616181822
1/21/211345911141732405672808896-
112-------
----1112457----------------
---112227
10182134--------------
Cameron
Inside Diameter Ounce Per Foot1/4" 0.53/8" 1.31/2" 2.03/4"
4.0
Riser Extension Capacitys
Valve LubricationFitting Thread
Gauge
1
3/4
1/2
3/8
1/4
1/8
-
Lubchem Valve Lube Sealants
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
Product Description Product Description Product Description
18
-
Air Operated Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
19
V-CLEAN FLUSH PUMPThe only way to clean a valve!The V-Clean
flush pump is designed to provide the pressureand volume needed to
properly flush the sealant and lubri-cant passages of any
lubricated valve, regardless of size oroperating pressure, and is
available in the following configu-rations.
DELIVERY HOSE SOLD SEPERATELY
Features Pumps in both directions with four acting check valves.
Easily removable air valves. 2.5 stroke for longer pump life.
Faster than hand operated flush pumps. Efficient yet simple design
for hassle free maintenance Can not stall. Special coating to
prevent oxidation of aluminum parts and
galling of stainless parts. All wetted parts are 316SS
.ONTRAPERUSSERP
GNITAR)MPG(YREVILED
K2CV ISP0002 2
K3CV ISP0003 52.1
K5CV ISP0005 96.
K8CV ISP0008 4.
K01CV ISP000,01 32.
K02CV ISP000,02 11.
-
Air
Ope
rate
d Lu
bric
atio
n Eq
uipm
ent
PO
Box
262
6, 2
3609
W. H
ardy
Rd.
, Spr
ing,
Tex
as 7
7383
, Ord
er 8
00-9
29-0
244,
Fax
281
-288
-084
9
For a
dditi
onal
info
rmat
ion
or a
ssis
tanc
e pl
ease
con
tact
you
r loc
al L
ubch
em re
pres
enta
tive.
20
V-CLEAN FLUSH PUMP.ONMETI .YTQ .ONTRAP NOITPIRCSED LAIRETAM
1 1 47857AY KNAT SS613
2 1 27857AY TEKSAGPMUP KROC
3 1 07857AY .YSSAPMUPNAELC-V MUNIMUMA
4 2 37857AY TEKCARBPMUP SS613
5 1 00801PM REHTAERBRETLIF LEETS
6 1 00001PM EGAUGLEVELTHGIS MUNIMULA
7 1 01645ND EVLAVLLABTPN"2/1 SSARB
8 1 599800F RENIARTSNOITCUS03-2/1-3P LEETS
9 1 196031F ELPPINCNIZ5.4XPM8-RTS-S LEETS
01 1 576131F DAEHQSPM8-S-ULP-S SS613
11 41 49906HY 613-HH-00.1-X-CNU-61-573. SS613
21 3 17806HY 613-HH-52.-X-CNU-42-01 SS613
31 21 29906HY 613-HH-5.-X-CNU-61-573. SS613
41 1 987331F SM6-PF8-RTS-S SS613
51 62 64286HY REHSAW-KL-613-573. SS613
61 41 09176HY TUN-613-GR-CNU-61-573. SS613
71 1 510021F RELPUOC-PF8-RTS-D SS613
81 1 57857AY TEKSAGDILKNAT KROC
-
Air Operated Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
21
Twin Pneumatic Cylinders Dimensions: 22x22x33 inches Approximate
Wt: 50 lbs. For use with 5 qt. / 10 lb. pail. Delivery 1/4 ounce
per stroke Maximum air inlet 100 psi
Force Flow 50
Force Flow 100
Lubchem Force Flow Lube PumpsLubchem Force Flow grease pumps are
reliable, heavy duty air operated pumps. Each pump is equipped
with100:1 ratio air motor that is capable of 10,000 psi discharge
pressures. Discharge pressure may be adjusted byregulating the
inlet air pressure to the pump through the air inlet regulator.
Force Flow pumps are equipped with twin cylinders that provide
continuous contact between the follower plate andthe sealant
providing a continuous prime to the pump. The positive pressure
applied by the pressure primingsystem prevents pump cavitation and
makes it possible to pump highly viscous sealants at low
temperatures.
Force Flow 100 Features Total Force Flow weight = 100 lb. High
volume delivery is 1/2 ounce per stroke. Five inch air motor, 100:1
ratio. For use with 40 lb. and 5 qt. cans. Moisture trap & air
inlet regulator included. Durable light weight design. Air inlet
gauge and discharge pressure gauge included. Permanently lubricated
pneumatic rams. Pumps 5 lb. per minute of NLGI # 2 grease.
Adjustable discharge pressure up to 10,000 psi. Maximum air inlet
pressure 100 psi. 10 discharge hose included.
100:1 Ratio Air Motor Twin Pneumatic Cylinders Bucket Blow Off
Filter / Regulator Follower Plate 10 Ft. Discharge Hose Control
Valve 15,000 psi gauge Giant Button Head Coupler Portability
Kit
Force Flow 50 Features
-
Air Operated Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
22
Model 35-50 Bucket Pump50:1 Air Motor & Pump TubeDischarge
Pressure 5,000 psiFollower PlateBucket Cover & Handle Assy.10
Discharge Hose IDControl ValveGauge Tee15k GaugeWhip HoseStraight
SwivelGiant Button Head Coupler NPTF
Model 45-100 Bucket Pump100:1 Air Motor & Pump TubeDischarge
Pressure 10,000 psiFollower PlateBucket Mount Cover & Handle
Assembly10 Discharge HoseControl ValveGauge Tee15k GaugeWhip
HoseStraight SwivelGiant Button Head Coupler
Lubchem Bucket PumpsThe Lubchem Model 35-50 & 45-100 bucket
pumps are economical air operated grease pumps designed to pumpbulk
lubricants. The units are set up for 5 gallon containers and are
equipped with follower plate, 10 dischargehose, control valve,
straight swivel, 15,000 psi liquid filled gauge and a giant button
head coupler.
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
23
Lubchem 1200 & 1500 Lube Pumps
The Lubchem 1200 &1500 Hand Guns apply up to 10,000 psi and
15,000 psi respectively, of dischargepressure with a minimum amount
of applied force by the user. The guns are set up for lubricating
both ballvalves and plug valves. The pumps are heavy duty, lever
operated and are primed by tightening the T screwhandle. Both pumps
accepts industry standard K size lube sealant grease sticks. The
outlet thread is 1/4NPTF. Both pumps come equipped from Lubchem
with hose assembly 967801 as seen below, additionalhose assemblies
and options are available on request. To order the model 1500 use
part number 908601,for model 1200 use part number 901601.
Caution:The model 1200 gun is not equipped with an internalball
check in the head assembly and line pressure maybleed back into the
barrel. Before removing the giantbutton head coupler, raise the
plunger handle and turnthe primer screw counter clockwise to
relieve pressure.
The model 1500 comes equipped with an internalcheck and pressure
release.
I t e m D e s c ript io n It e m D e s c rip t io n
1 Head 16 P lunger Handle2 P ipe P lug 17 P lunger3 Nut 18 P ack
ing Nut4 P rim er P lug 19 P ack ing 5 Washer 20 Head Gasket6 P
rimer Spring 21 Co upler Cap7 Screw 22 Co upler Seal8 Nut 23 Co
upler Spring9 B arrel 24 O-ring10 Co llar 25 Co upler P is to n11
Screw Handle 26 Co upler B o dy12 Link 27 Co upler A ssembly13 Stud
28 Co upler A dapter14 Lo ck Washer 29 Ho se 15 P lunger Stud
Hose Assembly 967801
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
24
Hose Assemblies
GAGES
SWIVELS STRAP
OTHER GAGES ARE AVAILABLE OTHER SIZES AVAILABLE
GAGE TEES SHUT OFF/RELIEF VALVE
965701- 12 " overall length hose with giant button head
coupler(907601) and swivel (984701). 1/4" NPT male inlet x giant
button head coupler outlet.
906601- 18 " overall length hose with giant button head
coupler(905801) gage tee (944801)gage (937801), "Z"swivel (944701),
swivel (914601), shut off relief valve(909901). 1/4" NPT male inlet
x giant button head coupler outlet.
905701- 12 " overall length hose with giant button head
coupler(903601). 1/4" NPT male inlet x giant button head coupler
outlet.
967801- 18 " overall length hose with giant button head
coupler(905801) gage tee (973601), gage (937801), swivel (914601).
1/4" NPT male inlet x giant button head coupler outlet.
957701- Screw Connection Hose Assembly for lubricatingvent cap
fittings. 18" overall length hose with screw connection coupler.
1/4" NPT male inlet x 1-14" femaleoutlet.
Hose Assembly Rating- Working Pressure 10,000 psi, Burst
Pressure 23,000 psi. Warning: Hoses are for use with handoperated
grease guns only. Inquire regarding additional warnings. Consult
Rubber Manufacturers Association Handbookfor proper operating
procedure.
The bottom connectionis 1/4" NPT male.
- 15,000 psi 2 1/2" face
- 20,000 psi
937801
999501
ADVANTAGES Easy handling of operational grease gun is assured.
Hose damage is reduced. Pressurized hoses will not twist.
- 1/4" NPT male x 1/2"-27 male- 1/4" NPT male x 1/2"-27 male-
1/4" NPT male x 1/2"-27 male- 1/8" NPT male x 7/16"-27 male
944701924601914601984701
- "Z"944701
- 90924601
- Straight914601 - Straight984701
Weight - 3 3/4 oz. Lightweight and strong, includes shoulder
pad, hooks, rings, link. Adjustable and extends to 46".
- For Screw Prime Gun- For Hydraulic Grease Gun
961601944601
By using Lubchem gagetee, adapter is not required. 1/4" NPT male
x 1/4"NPT female. (Special order teesavailable).
OTHER HOSE LENGTHS, END COMBINATIONS AND ASSEMBLIES ARE
AVAILABLE
905601- 10" overall length swivel hose with giant buttonhead
coupler (903601), gage tee (973601), gage (937801)1/4" NPT male
inlet x 1-14" female outlet.
973601944801902601
- 1 1/4" hex- 7/8" hex- 1 1/4" hex
(includes check valve)
909901- 1/4" NPT male x 1/4" NPTfemale.
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
25
Lubricant Stick Size - JGrease Delivery - 1 ounce per 40
strokesSold With Hose Assembly - 967801
Pressure Rating - 10,000 psi15,000 psi gauge includedTotal
weight - 13 lbs.
Lubchem Model 1000 Hydraulic Hand Pump
Description:The Lubchem 1000 Hydraulic Hand Pump (part # 900011)
exerts a maximum pressure of 10,000 psi. It is a durableself
priming pump that is easy to operate. This unit is equipped with a
bypass valve that allows the user to relieveinternal pressure at
any time by turning the bypass valve counter clockwise one
revolution.As an added safety feature the Lubchem model 1000 is
equipped with an internal hydraulic relief valve. This
featureprovides maximum safety for the user by preventing over
pressurization of the hydraulic system.
Features:Handle Latch Assembly- Prevents damage due to over
extension of the piston.Graduated Handle - One ounce marked handle
to eliminate waste and provide greater accuracy during
injec-tion.
Warning - Use only UCON-500 hydraulic fluid or equal in this
pump.
Repair and Exchange:Lubchem offers reconditioning and repair of
all types of hydraulic hand guns. Simply send the gun to us and we
willpromptly fax an estimate for the repair charges at no charge to
you. The guns are normally returned within oneweek of your approval
for the repairs.
Replacement parts and repair kits are available upon
request.
Hose Assembly 967801
-
Valve Lubrication Equipment
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
26
I t em Part N u m b er Descri p t i o n I t em P art N u m b er
Descri p t i o n1 908701 B ody Assem bly 27 918701 L i n k A ssem b
ly2 928701 B ody 28 977701 L i n k3 * 948701 Cy l i n de r 29
979701 St r i ppe r Bo l t4 * 924801 O - Ri n g 30 987701 Lock Nu
t5 * 988701 O - Ri n g 31 903801 La t ch Assem b ly6 * 962601 O -
Ri n g 32 953801 St em & Kn ob Assem b ly7 * 911801 O - Ri n g
33 933801 La t ch Screw8 * 958701 Plun ge r 34 973801 I n t e rn a
l La t ch Sp r i n g9 * 970801 O - Ri n g 35 993801 Re t a i n e r
Ri n g1 0 * 950801 I n t e rn a l Re l i e f Va lv e 36 913801 La t
ch A r m1 1 * 956801 Fi l t e r A ssem b ly 37 923801 La t ch Sleev
e12 909701 Ch eck Va lv e Assem b ly 38 983801 Cap Scr ew13 998701
Ch eck Va lv e Screw 39 901801 Pi st on A ssem b ly14 919701 Wash
er 4 0 * 912801 Lea t h e r Cup15 939701 Fi l t e r Screen 41
951801 Pi st on 16 929701 Spr i n g 4 2 * 981801 O - Ri n g17
918601 B a l l 43 991801 Wash er Nu t1 8 * 984001 O - Ri n g 4 4 *
971801 Wash er 19 959701 B y -pass Va lv e 45 961801 Cap Screw20
979701 St em Re t a i n e r 46 921801 Grease Ba r re l21 989701 Cap
Screw 47 931801 Grease Ba r re l Cap22 932801 Flu i d Bag B ar re l
Cap 48 967701 H an d le23 922801 Flu i d Bag B ar re l 49 934801 La
t ch Sp r i n g Ex t ern a l24 902801 Flu i d Bag B leede r Assem b
ly 50 980801 Fi l t e r Screen25 982801 Flu i d Bag Sea l Ri n g *
904801 Repa i r K i t26 927701 Fu lcrum A ssem b ly
For additional information pertaining to trouble shooting and
repair procedures pleaserefer to the Lubchem Model 1000 Maintenance
& Repair manual.
Lubchem Model 1000 Hydraulic Hand Gun
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
27
ThreadSize Material Heat Treatment Plating Ball
Spring Part Number
1" NPT
1" NPT
3/4" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/4" NPT
1/4" NPT
1/4" NPT
1/4" NPT
3/8" NPT
3/8" NPT
3/8" NPT
1215 Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
1215
1215
316SS
4140
410SS
1215
316SS
4140
1215
316SS
4140
410SS
Annealed (NACE)
Annealed (NACE)
Annealed (NACE) BGF14-BH-2
BGF38-BH-2
BGF12-BH-3
BGF34-BH
BGF1-BH-2
BGF1-BH
Annealed (NACE)
Rc22 max. (NACE)
Rc22 max. (NACE) BGF14-BH-4
BGF14-BH
BGF38-BH
BGF12-BH-2
Rc22 max. (NACE) BGF12-BH-3
BGF38-BH-3
BGF12-BH4
BGF12-BH
Rc22 max. (NACE)
Rc22 max. (NACE)
CA
CA
CA
CA
CA
K-Monel
K-Monel
K-Monel
K-Monel
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
K-Monel
302SS
302SS
302SS
302SS
302SS
K-Monel
K-Monel
K-Monel
K-Monel
1 5/8"
SPRING
1/4" BALL
1"HEX
1 1/4" HEX
VENTED CAP
1" - 14 UNS
1 5/8"
SPRING
1/4" BALL
1"HEX
1 1/4" HEX
VENTED CAP
1" - 14 UNS
ACCEPTS BUTTON HEADOR SCREW -ON TYPE
GREASE GUN COUPLER
ThreadSize Material Heat Treatment Plating Ball
Spring Part Number
1" NPT
1" NPT
3/4" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/4" NPT
1/4" NPT
1/4" NPT
1/4" NPT
3/8" NPT
3/8" NPT
3/8" NPT
1215 Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
1215
1215
316SS
4140
410SS
1215
316SS
4140
1215
316SS
4140
410SS
Annealed (NACE)
Annealed (NACE)
Annealed (NACE) BGF14-2
BGF38-2
BGF12-3
BGF34
BGF1-2
BGF1
Annealed (NACE)
Rc22 max. (NACE)
Rc22 max. (NACE) BGF14-4
BGF14
BGF38
BGF12-2
Rc22 max. (NACE) BGF12-3
BGF38-3
BGF12-4
BGF12
Rc22 max. (NACE)
Rc22 max. (NACE)
CA
CA
CA
CA
CA
K-Monel
K-Monel
K-Monel
K-Monel
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
Inconel600
K-Monel
302SS
302SS
302SS
302SS
302SS
K-Monel
K-Monel
K-Monel
K-Monel
* Zinc w/DC - Zinc with dichromate *CA - AISI 52100 chrome
alloyOther materials & plating available upon request
VENTED CAP BODY GREASE FITTING
VENTED CAP BODY GREASE FITTING w/ GIANT BUTTON HEAD
For Service to 10,000 psi
For Service to 10,000 psi
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
28
ThreadSize Material Ball Spring
HexSize Part Number
1" NPT
3/4" NPT
1/2" NPT
1/2" NPT
3/8" NPT
3/8" NPT
1/4" NPT
1/4" NPT
1/2" NPT
1215
316SS
1215
1215
316SS
1215
1215
1215
316SS
GBH12-20
GBH38-2
GBH12
GBH34
GBH1
GBH14-2
GBH38
GBH14
GBH12-2
CA
CA
CA
CA
CA
CA
Inconel600
Inconel600
Inconel600
302SS
302SS
302SS
302SS
302SS
302SS
K-Monel
K-Monel
K-Monel
1 5/16"
1 1/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
ThreadSize Material Ball Spring
HexSize Part Number
1/2" NPT
3/8" NPT
1/4" NPT
1/8" NPT
3/8" NPT
1215
1215
1215
1215
1215
GBH14-S
GBH38-S
GBH12-S
GBH38-16
GBH18-S
CA
CA
CA
CA
CA
302SS
302SS
302SS
302SS
302SS
7/8"
7/8"
7/8"
7/8"
7/8"
ThreadSize Material Ball Spring
HexSize Part Number
1/2" NPSM
3/8" NPSM
1/4" NPSM
3/4" NC
5/8" NC
3/4"NF
1/2" NC
1215
1215
1215
1215
1215
1215
1215
CLF14-S
CLF38-S
CLF12-S
CLF34-16-S
CLF12-13-S
CLF34-10-S
CLF58-11-S
CA
CA
CA
CA
CA
CA
CA
302SS
302SS
302SS
302SS
302SS
302SS
302SS
2 7/16"
3 3/4"
3 1/8"
2 7/8"
3 7/16"
3 1/8"
2 3/16
ThreadSize Material Ball Spring
HexSize Part Number
3/4" NPSM
1/2" NPSM
3/8" NPSM
1/4" NPSM
1215
1215
1215
1215
CLF38
CLF12
CLF34
CLF14
CA
CA
CA
CA
302SS
302SS
302SS
302SS
3 7/16"
4 3/4"
2 7/16"
3 3/4"
GIANT BUTTON FITTINGS (GBH)
COMBINATION LUBE/INJECTOR (GHB)
Double Ball Check
Single Ball Check
For Service to 10,000 psi
For Service to 10,000 psi
DOUBLE BALL CHECKSINGLE BALL CHECK
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
29
SAFE SEAL (Giant Button Head)
*316SS Material-Annealed Rc 22 max. (Nace)*CA-Aisi 52100 chrome
alloy *Zinc with dichromateOther configuration, materials &
plating available upon request.
ThreadSize Material Plating Ball Spring Part Number
1/2" NPT
1/2" NPT
3/8" NPT
3/8" NPT
1/4" NPT
1/4" NPT
1215 Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
316SS
1215
1215
316SS LS10N2C0
LS10N310
LS10N4C0
LS10N410
LS10N210
LS10N3C0
CA
CA
CA
K-MonelInconel
600
Inconel600
Inconel600
302SS
302SS
302SS
K-Monel
K-Monel
Double Check - 2 Piece Metal To Metal Seal with Floating Cone to
Prevent Seat GallingFor Service to 10,000 psi
"FREE FLOW" BODY GREASE FITTING
OPEN VALVE
LUBRICANT FLOW
CLOSED VALVE
Even the heaviest of lubricants that can be pumped or sealants
that can be compressed (extruded) through apacking fitting, will
flow freely through fittingsincorporated with the "FREE FLOW"
concept.
Other FeaturesCan Be Used With a Ball Soft Seat
Increased Fitting Function in Extreme Cold Enviroments.
Protects Spring From Damage - Permits a more effectiveusage of
Low Hardness Corrosion Resistant Spring WireMaterials.
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
30
ThreadSize Material Heat Treatment Plating Ball Part Number
1/2" NPT
3/8" NPT
1/2" NPT
3/8" NPT
1/2" NPT
1/4" NPT
1/4" NPT
3/8" NPT
1/4" NPT
3/4-10 TPI
5/8-11TPI
1215
316SS
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
316SS
4140
4140
1215
4140
1215
316SS
1215
1215
Annealed (NACE)
Annealed (NACE)
Annealed (NACE)
Rc 22 max. (NACE)
Rc 22 max. (NACE)
Rc 22 max. (NACE)
PIF12-3
PIF14
PIF14-3
PIF12-2
PIF38-3
PIF12
PIF38-2
PIF38
PIF14-2
PIF34-10
PIF58-11
302SS
302SS
302SS
302SS
302SS
302SS
K-Monel
302SS
302SS
K-Monel
K-Monel
*Zinc w/DC - Zinc with Dichromate *CA - AISI 52100 chrome
alloyOther configurations, materials & plating available upon
request
PACKING INJECTION FITTING
BODY VENT (BLEEDER) FITTINGS
(Bonnett or Plastic Injection Fitting)FOR SERVICE TO 10,000
psi
FOR SERVICE TO 10,000 psi
ThreadSize Material
HexSizel OAL Heat Treatment Plating Ball Part Number
1 1/2" NPT 2" 2 5/8"
3/4" NPT
1 1/4" NPT
1/2" NPT
1" NPT
1/2" NPT
3/8" NPT
1" NPT
1/2" NPT
3/8" NPT
1/4" NPT
1/4" NPT
1215
1215
1215
316SS
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
Zinc W/DC
1215
4140
1215
316SS
316SS
316SS
1215
1215
Annealed (NACE)
Annealed (NACE)
Annealed (NACE)
Annealed (NACE)
Rc 22 max. (NACE)
BV1
BV12-2
BV38
BV114
BV12
BV112
BV34
BV1-2
BV12-3
BV38-2
BV14
BV14-2
440SS
440SS
440SS
440SS
440SS
440SS
440SS
440SS
TC
TC
TC
TC
*Zinc w/DC - Zinc with Dichromate *CA - AISI 52100 chrome
alloyOther configurations, materials & plating available upon
request
1 3/4"
1 5/16"
1 5/16"
1 1/8"
7/8"
7/8"
7/8"
7/8"
7/8'
7/8"
7/8"
2 1/2"
2 7/16"
2 7/16"
1 3/4"
1 5/8"
1 5/8"
1 5/8"
1 5/8'
1 5/8"
1 5/8"
1 5/8"
OAL
3/4" Hex Head Stem
Hex Body
Venting Port
Sealant Ball
1/4" Thru 1 1/2" NPT
Stop PinPrevents Stem
Disengagement
Roll PinRetainer
1/4" Diameter Ball
7/8" Hex
Saftey Vent
3/4" Hex HeadStinger
OAL
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
31
Combination Lube Adapter
SafetyVentHole
When was the last time you traveled a great distance to service
a valve only to find that the fittingon the valve was not a
standard type? The Lubchem Valve Adapter Kit contains 12 adapter
fittingsthat will provide the flexibility you need to service a
wide variety of standard and non-standardvalve fittings. The kit
also includes fittings to contain leaks on damaged fittings.
Convert short WKM style screw on vent cap fittings 3/4" to
standard giant button head. Convert regular WKM style screw on vent
cap fitting 1" to standard giant button head.Convert McEvoy and
7/8" style screw on vent cap fittings to standard giant button
head. Convert small Cameron 3/4" style screw on vent cap fitting to
standard giant button head. Convert packing injector fitting to
standard giant button head.
The following parts are included in our kit.
Combination Lube adapters included are:
Leak Lock Fittings:
Giant Button Head Leak Lock fitting for leaking or damaged
standard button head. Giant Button Head Fitting for leaking or
damaged standard button head. Giant Button Head Leak Lock fitting
for damaged or leaking oversized giant button head fittings.
Standard Giant Button Head fitting with adapter to convert Cameron
3/4" vent cap fitting to standard giant button head.
Standard Leak Lock Fitting
SealingGasket
ButtonHead Fitting
Lubchem Valve Lube Adapter KitPart # VAK10
-
Valve Lubrication Fittings
PO Box 2626, 23609 W. Hardy Rd., Spring, Texas 77383, Order
800-929-0244, Fax 281-288-0849
For additional information or assistance please contact your
local Lubchem representative.
32
Pressure Relief Tool for Packing Injection Fittings
Pressure Relief Tool
Pressure Relief Tools:
Pressure relief tool for packing injector fittings. Pressure
relief tool for WKM style vent cap fitting Body vent bleeder
fitting.
Lubchem Valve Lube Adapter KitPart # VAK10