Top Banner
35

LTE-EPC Overview

Sep 29, 2015

Download

Documents

borkan

PGW, SGW, MME, S5/S8, E-RAB
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • Scalability of bandwidth

    Urban areas:

    Most likely LTE will be deployed.

    Stepwise deployment in UMTS 2.1 bands will be possible at a later stage.

    Rural areas:

    Option 1: deploy UMTS in 900 MHz band.

    Advantage: rollout can start now

    Disadvantage: a block of 5 MHz need to be taken out of the GSM band. Not a lot of operators can afford to take out this much of spectrum due to heavy usage in this band

    Option 2: Introduce LTE in 900 MHz band

    Advantage: reuse of GSM 900 Sites.

    step by step introduction of LTE with smaller granularity (1.4 / 3 / 5 /MHz).

  • Cost per MByte decreases with introduction of new technologies.

    From HSPA > LTE cost per MByte will reduce with more than 70%

    Why?

    -Increased spectral efficiency > bits per Hz per cell for LTE (2X2 MIMO) ~ 1.7

    -Flat architecture.

    -Reuse of spectrum > Refarming of existing 900 MHz band in rural areas possible. For urban larger bandwidth expected in 2.6 GHz

  • SAE: System Architecture Evolution

    SAE GW: Serving Gateway +PDN Gateway

  • UDP: User Datagram Protocol ( L4 Transport Layer)

  • SCTP: Stream Control Transmission Protocol. For IP signalling

    GTP: GPRS Tunnelling Protocol ( same as for UMTS Rel 99): user plane traffic