This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1LTE Cell Planning
LTE RNP 2010-06
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
The general process includes information collection, pre-planning,
detailed planning, and cell planning. In the cell planning, main
concerns are frequency planning, cell ID planning, TA planning, PCI
planning, neighboring cell planning, X2 interface planning, and
PRACH planning.
Detailed Planning
Cell Planning
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Why and when perform frequency planning?
When the LTE system works on the same frequency band, serious
interference occurs between the UEs on the edge of a cell because
they are close to each other and use the same resources. In this
case, the performance of the UEs deteriorates. The inter-cell
interference coordination (ICIC) technology can be used to change
interference distribution, thus improving the throughput of the UEs
on the edge of a cell.
When static DL ICIC is used, the entire bandwidth is divided into
three parts, each of which serves as the edge band of a cell for
reuse. In this case, network planning engineers need to perform
frequency planning.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Notes for Frequency Planning
In actual applications, the network structure is quite complex,
therefore 1x3 frequency reuse can mitigate interference only to a
certain extent.
For segmental expansion, frequent planning adjustments need to be
performed. In this case, network performance may deteriorate.
In scenarios where indoor coverage and outdoor coverage require
coordination, frequency reuse cannot be ensured.
If the DL ICIC function is required, dynamic ICIC is
recommended.
114.unknown
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Cell ID Planning
Different from a WCDMA cell ID, LTE cell ID consists of 20-bit eNB
ID and 8-bit cell ID, which ensures that the LTE cell ID is unique
in the entire network. If the PLMN (MCC + MNC) is used, the LTE
cell ID is unique worldwide. The WCDMA cell ID is unique on each
RNC, the GSM and CDMA cell ID also is similar to the WCDMA cell
ID.
The eNB involves the local cell ID, sector ID, and cell ID. It is
advised to plan the three IDs starting from 0, which ensures that
they are consistent.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Considerations for Actual Planning
In practice, customers may provide numbering rules for different
areas and cities. If customers have no additional requirements, the
IDs planned must be different in principle.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
TA Planning
TA Concept
Similar to the location area and routing area in 2G/3G networks,
the tracking area (TA) is used for paging. TA planning aims to
reduce location update signaling caused by location changes in the
LTE system.
TAI list
A list of TAIs that identify the tracking areas that the UE can
enter without performing a tracking area updating procedure. The
TAIs in a TAI list assigned by an MME to a UE pertain to the same
MME area. Additionally, the TAIs in a TAI list assigned by an MME
to a CS fallback capable UE pertain to the same location area. In
this case, the defining of the relationship between the tracking
area(s) and the location area(s) is operator specific.
In LTE system, if an UE changes the TAs in the TAI list, TA update
won’t be triggered.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
TA Planning Principles
A TA should be medium. The limitations by the EPC must be
considered. (Currently, each TA supports a maximum of 30 eNBs in
the EPC. The number may be adjusted later.)
When the suburban area and urban area are covered discontinuously,
an independent TA is used for the suburban area.
A TA should be planned for a continuous geographical area to
prevent segmental networking of eNBs in each TA.
The paging area cannot be located in different MMEs.
The mountain or river in the planned area can be used as the border
of a TA to reduce the overlapping depth of different cells in two
TAs. In this way, fewer location updates are performed on the edge
of a TA.
The LAC planning in the existing 2G/3G networks can serve as a
reference for planning TAs.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
PCI Planning
In LTE system, the physical cell identifier (PCI) is used to
differentiate radio signals of different cells. That is, the PCI is
unique in the coverage of cells. Cell IDs are grouped in the cell
search procedure. The ID of a cell group is determined through the
SSCH, and then a specific cell ID is determined through the
PSCH.
The function of PCIs in the LTE system is similar to that of
scrambling codes in the WCDMA system. PCI planning also aims to
ensure the reuse distance.
Differences between a scrambling code and a PCI: The scrambling
code ranges from 0 to 511 whereas the PCI ranges from 0 to 503. In
addition, the protocols do not have specific requirements for
scrambling code planning. Therefore, only the reuse distance needs
to be ensured in scrambling code planning. For PCI planning,
however, 3GPP protocols require that the value of PCI/3 should be
0, 1, or 2 in each eNB.
The SCP can be used for PCI planning. The prototype version is
available for the tool specific to PCI planning but the tool needs
evaluation.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
PCIs need to be reserved for indoor coverage.
For multiple cities, PCIs need to be reserved for border
coverage.
For a high site that may lead to cross-cell coverage, a large reuse
distance needs to be set independently.
115.unknown
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Neighboring Cell Planning
The method of planning LTE neighboring cells is similar to that of
planning GSM/WCDMA/CDMA. Currently, the planning method and tool
for LTE neighboring cells are available.
The actual configuration is different. There is no BSC in the LTE
system. When an eNB cell is configured as neighboring cells of
other eNBs, external cells must be added first, which is similar to
the scenario where inter-BSC neighboring cells are configured on
the BSC. That is, neighboring cells can be configured only after
the corresponding cell information is added.
Currently, neighboring cells are configured on the eNB based on the
local cell ID instead of the cell ID used in previous systems.
Therefore, the local cell ID and cell ID should be
consistent.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
ANR and Neighboring Cell Planning
Automatic Neighbor Relation (ANR) can automatically add and
maintain neighbor relations. The initial network construction,
however, should not fully depend on ANR for the following
considerations: a. ANR is closely related to traffic in the entire
network; b. ANR is based on UE measurements but the delay is
introduced in the measurements.
After initial neighbor relations configured and the number of UEs
increasing, some neighboring relations may be missing. In this
case, ANR can be used to detect missing neighboring cells and add
neighbor relations, thus network performance improved.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
X2 Interface Planning
X2 interface planning is based on neighbor relations, that is,
neighboring cells belonging to different eNBs need to be obtained.
In eRAN1.0, each eNB can be configured with a maximum of 16 X2
interfaces. If there are more than 16 X2 interfaces, the redundant
X2 interfaces with the remotest distance can be deleted. In eRAN1.1
and eRAN2.0, each eNB can support 32 X2 interfaces.
The later version of the ANR can automatically maintain X2
interfaces to solve the problems with missing X2 interfaces or
configuration errors.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Content
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
What is the logical root sequence index?
The random access preambles are generated from Zadoff-Chu sequences
with zero correlation zone.
There are 64 available preamble sequences in each cell. The 64
preamble sequences are first generated from a root Zadoff-Chu
sequence using cyclic shift. If less than 64 preamble sequences are
generated, the remaining are generated from the root Zadoff-Chu
sequence corresponding to the
logical index.
the logical root sequence index, which is sent
to the UE through the SIB2.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Zadoff-Chu sequence
A Zadoff-Chu sequence has good self-correlation and
cross-correlation and is defined as follows:
indicates the length of the Zadoff-Chu sequence, and u indicates
the physical root sequence index. The relation between the logical
root sequence index and physical root sequence index is defined in
protocols.
The preamble sequences are generated from the root Zadoff-Chu
sequence through the following cyclic shift.
The cyclic shift value is defined as follows:
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Causes for Planning the Root Sequence Index
There are 64 preamble sequences in each cell. The preamble sequence
is selected randomly or assigned by the eNB. To reduce interference
of preamble sequences between neighboring cells, the root
Zadoff-Chu sequence index need to be planned properly.
The planning aims to assign the root Zadoff-Chu sequence index for
cells to ensure that different preamble sequences are generated for
neighboring cells through the index. In this way, interference of
preamble sequences between neighboring cells can be reduced.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
Preamble format
Preamble Format
The unit of r is km. The unit of is sec. The value of is subject to
the cell radius and maximum delay extension.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt :
R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular :
Arial :18-20pt (2-5):18pt : :
13
.
How to Plan (Take a Low Speed Cell as an Example)
Step 1: The Ncs value is determined by the cell radius. If the cell
radius is 10 km, the Ncs value is 76.
Step 2: The value of 839/76 is rounded down to 11, that is, each
index can generate 11 preamble sequences. In this case, six root
sequence indexes are required to generate 64 preamble
sequences.
Step 3: The number of available root sequence indexes is 139 (0, 6,
12…828).
Step 4: The available root sequence indexes are assigned to cells.
The assignment principles are similar to those for PCIs.
The planning method of a high speed cell is similar to that of a
low speed cell. The algorithm for determining available root
sequence indexes, however, is more complex.
Thank you