LSU 06/04/2007Electronics 61 Data Acquisition Electronics Unit – Lecture 6 Sensors and Transducers Signal conditioning Data sampling and recording.

LSU 06/04/2007 Electronics 6 1

Data Acquisition Electronics Unit – Lecture 6

Sensors and Transducers

Signal conditioning

Data sampling and recording

LSU 06/04/2007 Electronics 6 2

Data Acquisition

SENSOR TRANSDUCERSIGNAL

CONDITIONING

ANALOG-TO-DIGITALCONVERSION

DATA COLLECTIONAND STORAGE

READOUTAND/OR DISPLAY

LSU 06/04/2007 Electronics 6 3

Sensors and TransducersSensor – responds to a physical variable

Transducer – converts a sensor response to an electrical signal

Often the sensor and transducer are integrated into a single unit – example, the thermistor converts temperature into resistance.

LSU 06/04/2007 Electronics 6 4

Some Physical Variables(possible sensor inputs)

Temperature Pressure ForceHumidity Light Intensity PositionRadioactivity Acceleration AttitudeMagnetic field strengthElectric field strengthChemical composition

LSU 06/04/2007 Electronics 6 5

Some Electrical Signals(possible transducer outputs)

Resistance

Voltage

Current

Pulse frequency

Pulse width

LSU 06/04/2007 Electronics 6 6

Temperature MeasurementConvert temperature to resistance? Use…

Thermistor, RTD (resistance temperature device)

Thermistor has negative TC, RTD has positive TC

Convert temperature to voltage? Use…

Thermocouple (Seebeck effect)

Convert temperature to current? Use …

Semiconductor junction devices

LSU 06/04/2007 Electronics 6 7

Magnetic Field Measurement

Hall Effect devices – for higher field strengths

from a few tens to a few hundreds of gauss

Magnetoresistive devices – for lower field strengthscan sense small fractions of a gauss

(used in electronic compasses)

LSU 06/04/2007 Electronics 6 8

Light MeasurementsIncludes Visible, Infrared, and Ultraviolet

Photoresistor – resistance decreases with light intensity

Photodiode – reverse current increases with intensity

Phototransistor – an “amplified” photodiode

Photomultiplier tube – most sensitive of allRequires high voltage supply

LSU 06/04/2007 Electronics 6 9

Pressure MeasurementsSolid state pressure transducers

Can sense gauge or absolute pressure

Output is usually a voltage signal

Usually a hybrid electromechanical device

Temperature compensation is essential

LSU 06/04/2007 Electronics 6 10

Signal Conditioning

Filtering to reduce noise or interference

Amplification or Attenuation

Level shifting

Span and Base adjustment

Impedance transformation

LSU 06/04/2007 Electronics 6 11

Span and BaseApplies to both the physical variable and the electrical signal

Example:Temperature sensor: -20 to +150 degrees Celsius

BASE = -20 degrees, SPAN = 170 degrees

Transducer output: 4 mA to 20 mA of electric currentBASE = 4 mA, SPAN = 16 mA

So 11.6 mA corresponds to 60.8 degrees (work it out!)

LSU 06/04/2007 Electronics 6 12

Analog to Digital Conversion

Changes a continuous electrical signal into a discrete numerical value, represented by a binary number.

Will be the topic of a separate presentation later on the course.

LSU 06/04/2007 Electronics 6 13

Data Collection – Sampling Rate

The Nyquist RateA signal must be sampled at a rate at least twice that of the highest frequency component that must be reproduced.

Example – Hi-Fi sound (20-20,000 Hz) is generally sampled at about 44 kHz.

LSU 06/04/2007 Electronics 6 14

BalloonSat as a Data Acquisition System

•BASIC Stamp BS2P24

•24LCxx EEPROM

•Real Time Clock

•4 channel A/D converter

•Voltage reference for ADC

•Temperature sensor

•4 LED indicators

LSU 06/04/2007 Electronics 6 15

HOBO® Data Logger

Combines sensors, transducers, signal conditioning, A/D conversion, storage, and readout into a compact, battery powered unit.

LSU 06/04/2007 Electronics 6 16

Further Reference

See: Input/Data Acquisition System Design for Human Computer Interfacing

By William Putnam and R. Benjamin Knapp

Included as an HTML document in the References folder of the Electronics Unit

LSU 06/04/2007 Electronics 6 17

Activity

Use the HOBO® data Logger and BoxCar® support software to collect temperature data.