Installation Instructions
Low-profile Connector KitsCatalog Numbers 2090-K6CK-D15F,
2090-K6CK-D15M, 2090-K6CK-D15MF, 2090-K6CK-D26M
About the Low-profile Connector Kits
Install the Low-profile Connector Kit
Refer to your drive user manual for additonal information on
installing the connector kit.
Connector Kit Cat. No. Application Description
2090-K6CK-D15F 15-pin, female, D-sub connector for auxiliary
feedback.
2090-K6CK-D15M 15-pin, male, D-sub connector for motor
feedback.
2090-K6CK-D15MF 15-pin, male, D-sub connector for motor feedback
with filter for thermal switch circuit.
2090-K6CK-D26M 26-pin, male, D-sub connector for user I/O.
Attribute2090-K6CK-D15F, 2090-K6CK-D15M, 2090-K6CK-D15MF,
2090-K6CK-D26M
Cable diameter 410 mm (0.160.39 in.)
Recommended torque Mounting screw Terminal screws Clamp and
cover screws
0.4 Nm (3.5 lbin) 0.2 Nm (2.1 lbin) 0.4 Nm (3.5 lbin)
Screw terminal wire size 0.061.31 mm2 (3016 AWG)
Recommended wire strip length 5 mm (0.2 in.) single
conductor
Catalog Number 2090-K6CK-D26M
Refer to your drive user manual for information on wiring the
connector kit.
Pin 1
Pin 18
Pin 9
Pin 19
Pin 10
Pin 26
Tie Wrap Slots
Exposed Braid Under Clamp Turn clamp over to hold small wires
secure.
Mounting Screws
Three-conductor I/O Cables (2) Discrete I/O Wire
Shrink-wrapped Insulation
26-Pin (male)User I/O (IOD) Connector
Follow these steps to form a compact connection.1. Push the
insulation
down-and-over itself.2. Move the insulation so it butts
against the outside wall of cover.3. Tape or shrink-wrap the end
of the
insulation to the cable.
Rockwell Automation Publication 2094-IN007D-EN-P - August 2010
PN-78141Supersedes Publication 2094-IN007C-EN-P - July 2004
Copyright 2010 Rockwell Automation, Inc. All rights reserved.
Printed in the U.S.A.
Allen-Bradley, Rockwell Automation, and Rockwell Software are
trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of
their respective companies.
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6
34752 erenky, stanbul, Tel: +90 (216) 5698400
Low-profile Connector KitsAbout the Low-profile Connector
KitsInstall the Low-profile Connector KitConnector DataCatalog
Numbers 2090-K6CK-D15F, 2090-K6CK-D15MCatalog Number
2090-K6CK-D15MFCatalog Number 2090-K6CK-D26M
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/CropGrayImages true /GrayImageMinResolution 300
/GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true
/GrayImageDownsampleType /Average /GrayImageResolution 300
/GrayImageDepth 8 /GrayImageMinDownsampleDepth 2
/GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true
/GrayImageFilter /FlateEncode /AutoFilterGrayImages false
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/CropMonoImages true /MonoImageMinResolution 1200
/MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true
/MonoImageDownsampleType /Average /MonoImageResolution 1200
/MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000
/EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode
/MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None
] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false
/PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000
0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true
/PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier ()
/PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped
/False
/Description > /Namespace [ (Adobe) (Common) (1.0) ]
/OtherNamespaces [ > /FormElements false /GenerateStructure true
/IncludeBookmarks false /IncludeHyperlinks false
/IncludeInteractive false /IncludeLayers false /IncludeProfiles
true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe)
(CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA
/PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged
/UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false
>> ]>> setdistillerparams> setpagedevice
Print Spec Sheet
JIT Printing SpecificationsRA-QR005G-EN-P - 3/29/2010
Printing SpecificationYOUR DATA HEREInstructionsNO
(required) Category:D5Select Print Category A,B,C or D from
category list, on "Introduction_Catagory Types" tab11 x 17LOOSE
-Loose LeafYESPre-sale / MarketingTOP
(required) Finished Trim Size Width:5.5 x 8.5 (half-size)8.5 x
11PERFECT - Perfect BoundA1LEFT
(required) Publication Number :2094-IN007D-EN-PSample:
2030-SP001B-EN-P3 x 5SADDLE - Saddle StitchA2RIGHTCORNER
Use Legacy NumberNOYES or NO18 x 24 PosterPLASTCOIL - Plastic
Coil (Coil Bound)A4BOTTOMSIDE
Legacy Number if applicable:Sample Legacy Number: 0160-5.3324 x
36 PosterSTAPLED1 -1 positionA3
Publication Title:Low-profile Connector Kits Installation
InstructionsSample: ElectroGuard Selling Brief80 character limit -
must match DocMan Title36 x 24 PosterSTAPLED1B - bottom 1
positionA5
(required) Business Group:Marketing CommercialAs entered in
DocMan4 x 6STAPLED2 - 2 positionsA6
(required) Cost Center:19041As entered in DocMan - enter number
only, no description. Example - 19021CMKMKE CM Integrated Arch -
19021CMKMKE Market Access Program - 191054.75 x 7 (slightly smaller
half-size)THERMAL - Thermal bound (Tape bound)A7
Binding/Stitching:LOOSE -Loose LeafReview key on
right...Saddle-Stitch Items All page quantities must be divisible
by 4.Note: Stitching is implied for Saddle-Stitch - no need to
specify in Stitching Location.80 pgs max. on 20# (text and cover)76
pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24# (text and
cover)
Perfect Bound Items940 pgs max. w/cover (90# index unless
indicated otherwise)70 pgs. min. for spine without words200 pgs
min. for spine with words
Plastcoil Bound Items530 pgs max. of 20# (if adding cover deduct
equivalent number of pages to equal cover thickness) (90# index
unless indicated otherwise)
Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover
(90# index unless indicated otherwise)4.75 x 7.75THERMALO - Thermal
Bound (Tape bound - offline)A8
(required) Page Count of Publication:4Total page count including
cover5.5 x 8.5 (half-size)A9
Paper Stock Color:White is assumed. For color options contact
your vendor.6 x 4Post Sale / Technical Communication
Number of Tabs Needed:5 tab in stock at RR Donnelley7.385 x 9
(RSI Std)B1
Stitching Location:Blank, Corner or Side8.25 x 10.875B2
Drill Hole YES/NONOAll drilled publications use the 5-hole
standard, 5/16 inch-size hole and a minimum of inch from the inner
page border.8.25 x 11 (RA product profile std)B3None
Glue Location on Pad:Glue location on pads8.375 x 10.875B4Half
or V or Single Fold
Number of Pages per Pad:Average sheets of paper.. 25, 50 75,100
Max9 x 12 (Folder)B5C or Tri-Fold
Ink ColorBLACKOne color assumes BLACK / 4 color assume CMYK /
Indicate PMS number hereA4 (8 x 11 ) (210 x 297
mm)CatalogsDbleParll
Used in Manufacturing:YESA5 (5.83 x 8.26) (148 x 210
mm)C1Sample
Fold:Half or V or Single FoldReview key on right...Short (must
specify dimensions between folds in Comments)
Comments:C2Z or Accordian Fold
Part Number:PN-78541JIT / PODMicrofold or French Fold -
designate no. of folds in Comments - intended for single sheet only
to be put in box for manufacturing
D1Double Gate
D2
FoldsHalf, V, Single C or Tri
Dble Parll
Z or Accordian Microfold or French
Double Gate
Short FoldD3
D4
D5
D6
D7
D8
D9
MBD000CCD74.bin
MBD000D141F.bin
MBD000E357A.bin
MBD000D05AE.bin
MBD000B37AA.bin
MBD000C2CF0.bin
MBD000CBFEF.bin
MBD000B71E5.bin
MBD000AB9B4.bin
MBD000AF7AA.bin