Loto

Ensuring you go home the same way you came to work

QUALITY LOCKOUT/TAGOUT SOLUTIONS

Lockout Hazards....Lock In Lives

2Phone: 132 832 www.protectoralsafe.com.au

TABLE OF CONTENTS

How To Implement An Effective Lockout/Tagout System 4

Important Procedures Relating To Lockout /Tagout 5

Key Charting & Site Registration 6

Key Systems 6

Padlock Customisation & Identification 6 -7

Safety Padlocks 7 - 8

Lockout Hasps 9 - 10

Electrical Lockout 11 - 12

Valve Lockout 13 - 14

Multi-Point Lockout 15

Safety Lockout Padlock Maintenance & Storage 16

Lockout Stations 16

Lockout Kits 17

Tagout 18 - 19

Compliance Centres 19

Product group from well-managedforests and other controlled sources.www.fsc.org Cert No. SCS-COC-003323©1996 Forest Stewardship Council

3

What Is Lockout/Tagout?Lockout/Tagout is an important safety procedure that involves shutting off the power to industrial machines or equipment during maintenance or repair.

The procedure protects employees from risks caused by power sources. Used properly in conjunction with a well-planned lockout process, the safety padlock helps ensure that employees will not inadvertently activate a piece of equipment while someone else is working on it.

Potential Hazards In The Workplace

1. Electricity

2. Hydraulic Pressure

3. Compressed Air

4. Gas

5. Steam

6. Fluids

Who Needs Lockout/Tagout? Thousands of accidents occur while repairing or servicing equipment. Most of those accidents are due to energy sources that have not been isolated. Therefore, identification of the equipment’s potential hazard is essential for a successful safety prevention procedure.

All employers have a duty of care to provide their employees and contractors with a safe working environment. Where there is moving machinery and plant items in operation an effective Lockout/Tagout program is a vital component.

Mining

Power Generation

Nuclear Generation

Oil & Gas

Automotive

Manufacturing


Implementing a lockout system is a crucial measure in protecting employee and contractor safety whilst undertaking maintenance.

When implementing a lockout/tagout system you need to take into account your current processes and consider what your workplace may look like in 1, 3 and 5 years time.

Below are some helpful tips you should consider when implementing a lockout/tagout system.

• Howmanyemployeesdoyouhaveonsite? The number of employees on site will determine if you need a registered or unregistered lockout system. Registered lockout systems are recommended for large end users or end users concerned about key duplications. Unregistered systems are recommended for small-medium end users. Orders will be supplied with randomly picked padlocks from over 100,000 key codes available.

• Howmanyemployeeswillrequiremorethanonesafetypadlock? Employees that require more than one padlock should be issued with keyed alike padlocks. That way they will only have to carry a single key to open their safety padlocks.

• Howwillyouquicklyidentifywhoownseachsafetypadlock? Padlock identification is extremely important in a lockout/tagout system as it quickly identifies the identity of the employee that applied the lockout device. Master Lock safety padlocks can be laser engraved on up to 4 sides, so consider laser engraving your safety padlocks with either an employee name or identification number. You can also engrave company logos to reduce lock pilferage.

• Whosuppliescontractorswiththeirsafetypadlocks? It is important to ensure contractor safety as well as the safety of your own employees. For that reason it is a good idea to hire/loan safety padlocks to contractors as they come onsite. Before undertaking any work, contractors should be trained on that sites lockout/tagout system. It is a good idea to use a different coloured padlock to help identify a contractor.

• Whatdoyouneedtoisolate? Not all energy sources can be isolated by applying a safety padlock directly onto the piece of equipment. Therefore you may require a range of lockout accessories such as circuit breaker lockouts, valve lockouts and multipoint lockouts to ensure the isolation is performed correctly.

• Donumerousemployeesworkonthesamepieceofequipment? If numerous employees work on the same piece of equipment you will need to purchase safety lockout hasps. These allow multiple workers to apply their own safety padlock. Alternatively you could use a group lock box. With a group lock box, an authorized isolator will perform the machine/plant isolations and then place the key to the isolation padlocks inside the lock box. Once he/she has done this, they will apply their safety padlock (usually green) to the group lock box, and then each worker will apply their own red safety padlock to the group lock box.

• Areallyourisolationpointslabeled? All isolation points should be uniquely labeled to ensure that the correct piece of equipment is isolated.

HOw TO ImpLEmENT AN EFFECTIvE LOCkOuT/TAgOuT SySTEm?

5

1. Identify Isolation Area Identify the energy sources to be isolated and check that the equipment being repaired/serviced can be isolated with a safety padlock or lockout device.

2. ApplySafetyDevices Apply your safety padlocks and lockout devices. If several employees are working on the same piece of equipment ensure each individual places their own safety padlock on the machinery.

3. Confirm No Residual Energy Remains Once machine has been isolated, make sure that no residual energy remains, as even if energy is isolated it can still be very dangerous.

4. Protect Prior to Reactivating Machinery Prior to removing all safety padlocks make sure that all forms of protection have been put in place, maintenance has been completed and all employees are at their posts prior to reactivating machinery.

ImpOrTANT prOCEdurES rELATINg TO LOCkOuT/TAgOuT?

CONTACT

PROTECTOR ALSAFE

TO ARRANGE A FREE

LOCKOUT/TAGOUT SITE

ASSESSMENT

THE E

NTIRE

MASTER

LOCK

RANGE

IS AVA

ILABL

E FRO

M

PROTE

CTOR A

LSAFE

BRANCH

ES NAT

IONALLY


Laser Engraving• Laser engraving is the most efficient method of permanently marking your safety padlocks. By permanently marking your safety padlocks you will prevent padlock theft and save time searching for the right employee or key.

Master Lock has an engraving cell in Australia, so safety padlocks can now be laser engraved within 5 working days.

For more information and to obtain laser engraving forms, please contact your Protector Alsafe representative.

(1) Determine the number of employees that you will want to use this system: Take into account future growth at your facility. Each employee should have a unique key code that is theirs alone.

(2) Choose one of the following Safety Keying Systems

a. Keyed Different

b. Keyed Alike

c. Master Keyed

(3) Determine how many employees will need to get more than one safety padlock for lockout. Those employees should get KA (keyed alike) padlocks.

REMEMBER:1EMPLOYEE–1SAFETYPADLOCK–1KEY

kEy SySTEmS

Safety padlocks must indicate the identity of the employee applying the device. All Master Lock Zenex™ safety padlocks are supplied with identification labels.

pAdLOCk CuSTOmISATION & IdENTIFICATION

kEy CHArTINg & SITE rEgISTrATION

To ensure there is no unwanted duplications of keys, Master Lock recommends all safety padlocks are 1 employee – 1 padlock – 1 key.

As the number of locks increase, so does the complexity of tracking keys and Master Lock is the expert at managing key changes and can keep a complete record of the progressive key codes assigned and manufactured for your site.

Key charting is recommended for large end users or end users concerned about key code duplication. With a key charted safety lockout system, orders will be registered with the Master Lock Key Charting System and will be assigned key codes to avoid the danger of key duplications. Locks are built ex-factory.

Furthermore Master Lock Safety Series Padlocks have a sealed keying system which ensures your safety lockout system stays pure by preventing haphazard rekeying and the accidental introduction of new codes.

Master Lock Safety Series padlocks are all standard key retaining which ensures that padlocks are not accidentally left unlocked. For more information please contact your Protector Alsafe representative.

7

Photo Identification• Master Lock Photo Identification labels allow you to personalise your safety padlocks so that the user is immediately recognisable. These labels are made of durable polypropylene and are UV stable. Simply take a photo and stick it underneath the self laminating strip.

Description Part No.

Photo Identification Label For Zenex™, Dielectric & Compact Safety Padlocks 0053 6103

* Sold per pack of 6 labels * Locks sold separately

Key Tags • Engravable 1.3cm x 4.4cm brass key tag for lock and key identification.


Brass ID Tag For Safety Lockout 0053 6137

410 ZenexTM Thermoplastic Safety Padlock• Zenex™ body with 6mm diameter plated metal shackle for corrosion resistance.

• Available 38mm (standard) or 76mm shackles.

Lock Colour Part No. Lock Colour Part No.

BLACK 0115 1978 PURPLE 0115 2046

BLUE 0115 1995 RED 0115 2063

GREEN 0115 2012 TEAL 0115 2080

ORANGE 0115 2029 YELLOW 0115 2097

Safety Padlocks are designed exclusively for lockout/tagout. Distinctive Zenex™ safety padlock is durable and stands up to chemicals, temperature extremes and is UV stable.

SAFETy pAdLOCkS

Steel Lockout HaspsR e l a t e d P r o d u c t

SeePage: 9

0053 6137

0053 6103


S32 Compact ZenexTM Thermoplastic Safety Padlock • 4.76mm Zenex™ diameter shackle makes it ideal for locking out smaller isolation points.

• Non-conductive, non-magnetic, non sparking safety padlock makes it ideal for electrical applications.

• Each padlock comes with a weather tough cover which seals at the shackle and keyway keeping out dust, dirt and grime.


BLACK 0096 6917 RED 0096 6849

BLUE 0096 6900 TEAL 0096 6951

GREEN 0096 6883 YELLOW 0096 6866

ORANGE 0096 6985 WHITE 0096 6968

PURPLE 0096 6934

*** AVAILABLE EARLY 2012 ***

Nylon Non-Conductive HaspR e l a t e d P r o d u c t

SeePage: 10

406 ZenexTM Thermoplastic Safety Padlock• All components are non-sparking, non-magnetic plastic, copper or brass.

• Ideal for electrical lockout, confined spaces, medical, military and mining.


BLACK 0777 2084 PURPLE 0777 2152

BLUE 0777 2101 RED 0777 2169

GREEN 0777 2118 TEAL 0777 2186

ORANGE 0777 2135 YELLOW 0777 2203

S31 Compact ZenexTM Thermoplastic Safety Padlock • 4.76mm stainless steel shackle makes it ideal for locking out smaller isolation points.

• Available key retaining (standard) or non key-retaining.

• Each padlock comes with a weather tough cover which seals at the shackle and keyway keeping out dust, dirt and grime.


BLACK 0983 6173 RED 0983 6037

BLUE 0983 6054 TEAL 0983 6122

GREEN 0983 6088 YELLOW 0983 6071

ORANGE 0983 6105 WHITE 0983 6156

PURPLE 0983 6139

Nylon Non-Conductive HaspR e l a t e d P r o d u c t

SeePage: 10

Zenex™ Shackle & Stainless Steel Hasp

R e l a t e d P r o d u c t

SeePage:10

9

Steel Hasps• Constructed from heavy gauge steel, these hasps keep equipment inoperative while repairs or adjustments are made.

InsideJawDiameter Padlock Capacity Part No.

25mm 6 0008 2484

38mm 6 0008 2501

Aluminium Hasps• Constructed from spark resistant aluminium, these hasps keep equipment inoperative while repairs or adjustments are made.


25mm 6 0652 3434

38mm 6 0652 3451

HeavyDutyHasps• Constructed from pry proof steel, these hasps keep equipment inoperative while repairs or adjustments are made.


25mm 4 0652 3468

25mm 8 0652 3485

Aluminium Snap-On Hasp• Constructed from anodised aluminium and stainless steel, the snap-on hasp combines multiple-person lockout and tagout identification. Hasps come complete with high-visibility re-usable write on safety label.


44 x 54mm 5 0053 6154

Lockout hasps are an integral part of a successful safety lockout program, providing effective multi-person lockout.

LOCkOuT HASpS

0652 3468

0652 3434

0008 2484

410 Zenex™ Safety PadlockR e l a t e d P r o d u c t

SeePage: 7


SeePage: 7


SeePage: 7

0053 6154


SeePage: 7


Nylon - Non Conductive Hasp• Constructed from thermoplastic nylon, this hasp offers dielectric protection as it is non-conductive and anti-sparking. Ideal for electrical applications.


25 x 63mm 6 0151 6135

DualJawHasp• Constructed from spark resistant aluminium this hasp keeps equipment inoperative while repairs or adjustments are made.


44 x 54mm 8 0652 3417

Zenex™ Shackle Hasp• With a Zenex™ body this hasp performs effectively in extreme conditions. It has a 4mm diameter steel shackle which makes it ideal for smaller lockout points.


25mms 2 0815 7865

Stainless Steel Hasp• Constructed from grade 316 stainless steel this hasp is ideal for corrosive environments. It has a 4mm diameter stainless steel shackle which makes it ideal for small lockout points.


25mm 8 0822 2261

0151 6135

0652 3417

0815 7865

0822 2261


SeePage: 8


SeePage: 8

S31 Zenex™ Safety PadlockR e l a t e d P r o d u c t

SeePage: 8

S31 Zenex™ Safety PadlockR e l a t e d P r o d u c t

SeePage: 8

11

Miniature Circuit Breaker Lockouts• The miniature circuit breaker fit most ISO/DIN circuit breakers found throughout the world. No tools required, simply insert the pin between the toggle, close and lock off with a Master Lock safety padlock.


Fits breaker with toggle openings 11mm or less 0777 2764

Fits breaker with toggle openings over 11mm 0777 2781

Fits breaker with pin-in toggles 0053 6171

Miniature Circuit Breaker Lockouts• This convenient solution universally fits miniature circuit breakers and can be easily applied to the toggle by tightening the screw and applying a Master Lock safety padlock.


Universal fit 0815 8035

Grip Tight™ Circuit Breaker Lockout• Simply move the breaker to the off position, open the red handle and place the lockout device over breaker toggle. Turn black knob clockwise until grips touch toggle. When the handle is closed the grips will tighten against the toggle. Move lockout handle to close position and apply a Master Lock safety padlock.


Suits tall and wide toggles 0652 3349

Suits single and double toggles 0652 3332

Set of each device 0652 3315

When electrical lockout is to be performed, the following preliminary precautions must be taken.• Individual to be equipped adequately for personal protection • Control dissipation of residual energy• Switch off circuit breaker • Ground electricity• Lockout equipment to prevent re-energising • Tagout equipment

ELECTrICAL LOCkOuT

0652 3349

0652 3332

0777 2781

0053 6171

0815 8035


SeePage: 8


SeePage: 8


SeePage: 8


Electrical Plug Lockout• Completely surrounds electrical plug to prevent accidental reconnection. Simply rotate and open the lockout cover, position the plug inside and close the cover. Secure cover with a Master Lock safety padlock by inserting the shackle through the overlapping locking eyelets.


Suits 120 to 240 volt plugs 0620 4973

Suits 240 to 550 volt plugs 0620 4990

Oversized Plug & Hoist Control Cover• Constructed from heavy duty nylon, the cinch sack effectively locks out all sizes of large electrical connectors and hoist controls. Simply loosen the strap, insert oversized plug or control into cover and pull strap tight around the cord. Secure the cinch sack by applying a Master Lock safety padlock through the grommets.

Size Part No.

482 x 165mm 0652 3366

660 x 254mm 0777 2730

914 x 356mm 0777 2747

Push Button Covers • Push Button Covers address the need for temporarily prohibiting access to a switch or control or to avoid nuisance changing of rotary switch settings. The S2151 is ideal for new button installations or for retrofitting to existing switch panels, while the S2153 is fixed ensuring instant availability.

Size Part No.

Rotary Push Button Cover – Removable 0096 7019

Install Bases for S2151 Removable Cover (12pk) 0096 7053

Rotary Push Button Cover - Permanent 0096 7036

0620 4973

0652 3366


SeePage: 7


SeePage: 7


SeePage: 7

0096 7019 0096 7036

13

Gate Valve Lockouts• Surrounds the valve operating handle to protect against accidental valve operation. Constructed from dielectric Zenex™ thermoplastic, these valve lockouts are designed to withstand chemicals and temperatures -57°C to 177°C. Each size rotates into itself and nests within the next larger size to save space in storage.

Size Part No.

Fits valves 2.71 - 8.12cm 0620 4871

Fits valves 5.41 - 13.54cm 0620 4888

Fits valves 10.83 - 17.60cm 0620 4905

Fits valves 16.24 - 22.07cm 0620 4922

Fits valves 21.66 - 35.19cm 0620 4939

Set of 5 (0480-0484) 0620 4956

Pressurised Gate Valve Lockout• Fits virtually all pressurised gas valves up to 7.6cm diameter. Designed to work with valve guard in place and its compact size makes it easy to store when not in use.


Pressurised Gas Valve Lockout 0777 2067

To control potential hazards such as gas, steam and fluids all valves must be isolated prior to maintenance. Prior to installing the lockout device all residual energy must be bled from the source.

vALvE LOCkOuT

0620 4956

Personal Lockout KitR e l a t e d P r o d u c t

SeePage: 17

0777 2067


SeePage: 7


Ball Valve Lockout - Handle On• Constructed from aluminium and steel this ball valve lockout offers heat, chemical and corrosion resistance up to 538°C. Designed to fit ball valves 6.35 to 100mm this lockout device works on a wide range of ball valve sizes and on insulated pipes and in close quarters.


Seal Tight™ Handle-On Lockout 0815 7882

Ball Valve Lockout - Handle On• The handle-on ball valve lockout is designed to fit onto all manual, quarter-turn ball valve handles to protect against accidental opening. Simply turn handle to closed position, slip lockout device onto handle and position the lockout device tab over angled portion of valve handle. Once done squeeze lockout device and valve handle together and insert Master Lock safety padlock into the eyelet that provides the tightest fit. When properly installed valve should not move toward open position.


Fits valves 6.35 - 25mm 0815 7899

Fits valves 31 - 76mm 0815 7916

Ball Valve Lockout - Handle Removed• Simply remove and store handle and cover the valve stem for secure lockout. Universal fit works on virtually all valve sizes and in all applications. Constructed from durable PVC polyester fabric and HDPE plastic makes it ideal to withstand corrosive environments and operate in extreme temperatures.


Seal Tight™ Handle-Removed Lockout 0787 2741

0815 7899

0815 7916

0815 7882

0787 2741


SeePage: 17


SeePage: 17


SeePage: 8

15

muLTI-pOINT LOCkOuT

AdjustableCableLockout• Integrated safety hasp and cable is ideal for multiple circuit breaker panel and side-by-side gate valve lockouts. Tough, lightweight Zenex™ thermoplastic body and flexible multi-stranded insulated steel cable performs effectively in extreme conditions.


Adjustable Cable 1.8m x 4mm 0822 2278Adjustable Cable 4.5m x 4mm 0096 7104

Latch Tight™ Group Lock Boxes• Storage devices capture keys for effective lockout of large equipment. Simply secure each lockout point on a piece of equipment with a single padlock. Place the keys in the group lock box and then each authorised employee places their personal padlock on the lock box to prevent access to keys inside.


Group Lock Box Red Portable / Wall Mount 0343 0947Group Lock Box Yellow Portable / Wall Mount 0652 3400Group Lock Box Portable 0652 3383

Pneumatic Lockout• The pneumatic lockout prevents pneumatic fittings from being connected to pressurised air source. Designed to fit virtually all male pneumatic fittings found in manufacturing facilities, this lockout device is constructed from stainless steel for corrosion resistance.


Stainless Steel Pneumatic Lockout 0777 2050

Steering Wheel Covers• Steering Wheel Covers provide a visual deterrent for vehicle maintenance. The trilingual warning notifies employees not to start or move the vehicle. Secure cover to steering wheel with a 0008 2501 hasp and Zenex™ Safety Padlock. For even greater deterrence, use the cover with a 0822 2278 cable. Simply thread the cable through the cover and steering wheel, wrap around the brake pedal and apply a lockout padlock to the hasp.


40.6cm Wheel Diameter 0652 368950.8cm Wheel Diameter 0053 618861cm Wheel Diameter 0777 1778

0343 0947 0652 3400 0652 3383

0822 2278

0777 2050

0652 3689


SeePage: 7


SeePage: 7


SeePage: 7


SeePage: 7


LOCkOuT STATIONS

Wall Mounted Padlock Stations• Heavy gauge steel with durable powder coated finish ensures long life.


Holds 6-8 padlocks 0777 2798

Holds 18-22 padlocks 0777 2815

Lockout Stations• Durable user-friendly lockout stations provide a central location for necessary lockout/tagout components.


4 Padlock Station (unfilled) 0652 3638

4 Padlock Station (with accessories) 0652 3672





0777 2798

0652 3621

0652 3638

0777 2815

SAFETy LOCkOuT pAdLOCk mAINTENANCE & STOrAgE

Lockout Stations and padlock racks provide a durable central location for storing necessary lockout/tagout equipment. To ensure long life of your safety padlocks Master Lock recommends the following padlock maintenance.

Over time, dust, particles and chemicals in the air settle on and in the padlock. They can create friction inside the precision locking and key components and impede opening and closing of the padlock.

• Annual cleaning is recommended. In particularly dusty or corrosive environments clean every three months.

• Clean the padlock. Use pressurised air to blow out dust.

• Apply a greaseless “DRY” lubricant such as Selley’s Eze-Glide.

• A very light spray of lubricant is recommended. Do not apply a heavy coat. Less is better. Insert key, open and close padlock several times to distribute lubricant. Wipe excess off key.

• NEVER use an oil or dry graphite lubricant. Oil attracts dust. Oil can also interfere with the movement of the pins in the locking mechanism. Graphite is often applied in excess, which then interferes with part movement. ONLY use a “DRY” lubricant for best results.

• Regular cleaning and lubrication of your safety padlock will ensure years of long life.

Compliance CentreR e l a t e d P r o d u c t

SeePage: 19

Compliance CentreR e l a t e d P r o d u c t

SeePage: 19

17

Personal Lockout Kits• Master Lock Personal Lockout Kits combine and organise commonly used electrical and valve lockout devices for individuals. Locks are keyed alike and kits can be built to meet your site’s needs.


Personal Electrical Lockout Kit: Contains 3 x Padlocks, 1 x Breaker Switch Padlock, 1 x Steel Hasp, 1 x Aluminium Snap-On Hasp, 5 x Grip Tight Circuit Breaker Lockouts, 1 x Universal Wall Switch Lockout, 12 x Do Not Operate Tags

0815 8290

Personal Valve Lockout Kit: Contains 3 x Padlocks, 1 x Steel Hasp, 1 x Aluminium Snap-On Hasp, 1 x Adjustable Cable Lockout, 3 x Gate Valve Lockouts, 1 x Handle-On Ball Valve Lockout, 1 x Handle-Removed Ball Valve Lockout, 12 x Do Not Operate Tags

0815 8460

Personal Lockout Pouch: Contains 3 x Padlocks, 1 x Steel Hasp, 12 x Do Not Operate Tags 0652 3519

Personal Electrical Lockout Pack: Contains 2 x Dielectric Padlocks, 3 x Miniature Circuit Breaker Lockouts, 1 x Universal Circuit Breaker Lockout, 2 x Grip Tight Circuit Breaker Lockouts, 1 x Zenex™ Shackle Hasp, 1 x Non-Conductive Hasp, 2 x Do Not Operate Tags.

0061 4575

Group Lockout Kits• Master Lock Group Lockout Kits combine and organise commonly used electrical and valve lockout devices for groups of workers. Locks are keyed to differ and kits can be built to meet your sites needs.


Group Electrical Lockout Kit: Contains: 6 x Padlocks, 2 x Breaker Switch Padlock, 1 x Steel Hasp, 1 x Adjustable Cable Lockout, 2 x Plug Lockouts, 6 x Grip Tight Circuit Breaker Lockouts, 2 x Universal Wall Switch Lockout and 24 x Do Not Operate tags

0815 8341

Group Valve Lockout Kit: Contains 6 x Padlocks, 1 x Steel Hasp, 1 x Aluminium Snap-On Hasp, 1 x Adjustable Cable Lockout, 4 x Gate Valve Lockouts, 1 x Handle-Removed Ball Valve Lockout, 1 x Handle-On Ball Valve Lockout, 24 x Do Not Operate tags

0815 8358

Group Lockout Kit (Electrical & Valve): Contains 6 x Padlocks, 2 x Breaker Switch Padlock, 1 x Steel Hasp, 1 x Aluminium Snap-On Hasp, 1 x Adjustable Cable Lockout, 2 x Plug Lockouts, 3 x Gate Valve Lockout, 1 x Handle-Removed Ball Valve Lockout, 1 x Handle-On Ball Valve Lockout, 6 x Grip Tight Circuit Breaker Lockouts, 2 x Universal Wall Switch Lockout and 12 x Do Not Operate tags

0815 8375

LOCkOuT kITS

0815 8290

0815 8358

0815 8460

0815 8341

0652 3519

0815 8375

0061 4575


• Tagout is a crucial and essential step in a safety procedure.

• Tagout requires indication that an operation is being done, identifying that an employee is servicing equipment and identifying the affected equipment.

• Each operation (maintenance, repair, cleaning, emptying) must be clearly tagged out, seen and understood quickly and easily.

• Safety tags are exposed to harsh environments, therefore, those tagout devices must be resistant, long lasting and reusable.

• Safety tags from Master Lock are made from high resistance material offering temperature resistance, chemical agent resistance, oil, humidity and dust.

Guardian Extreme Tags• Guardian Extreme tags are the toughest tags. Constructed from industrial grade polypropylene the graphics are permanently fused into the polypropylene to ensure your safety message is vibrant and clear for years to come.

• The tags withstand high humidity, UV radiation, harsh chemicals, frequent wash downs and extreme temperatures.

• Simply write on tags with a permanent marker and then wipe-off with isopropyl alcohol or a citrus based stain remover.


DEFECTIVE EQUIPMENT 0983 0563

DO NOT ENTER 0983 0580

DO NOT OPERATE 0983 0597

DO NOT START 0983 0614

OUT OF ORDER 0983 0631

UNSAFE DO NOT USE 0983 0648

DO NOT CLOSE 0983 0665

DO NOT OPEN 0983 0733

DO NOT USE 0983 0767

HIGH PRESSURE 0983 0801

HIGH VOLTAGE 0983 0818

HOT 0983 0835

KEEP OUT 0983 0852

MEN WORKING ON MACHINERY 0983 0903

OUT OF SERVICE 0983 0920

FLAMMABLE 0983 0937

CONFINED SPACE ENTRY IN PROGRESS 0983 0971

TAgOuT

* Sold per pack of 6

0983 0563 0983 0597

0983 0648 0983 0920

0983 0937


SeePage: 7

0983 0971

19

Scaffold Tags• Scaffolding tags prevent against hazardous risks relative to the untimely use of a scaffolding that is being erected, dismounted or maintained.


Danger - Red 0815 7933

OK - Green 0815 7967

Caution - Yellow 0815 7950

* Sold individually

Safety Tags• Durable polyester laminate resists water & grease.


Do Not Operate Tags 0856 5678

* Sold per pack of 12

Compliance Centres• Zippered folders keep Material Safety Data Sheets, Lockout Procedures and other important documents organised while keeping dirt and grime out. Available with or without wall mounting bracket.


Compliance Centre 38mm Folder (with wall bracket) 0777 1829

Compliance Centre 38mm Folder (without wall bracket) 0777 1846

Compliance Centre 76mm Folder (with wall bracket) 0777 1863

Compliance Centre 76mm Folder (without wall bracket) 0777 1880

0777 1846


SeePage: 7

Lockout StationR e l a t e d P r o d u c t

SeePage: 16

0856 5678

0815 7933 0815 7967 0815 7950

COmpLIANCE CENTrES

PA/SAS/1111/MAYO

Product group from well-managedforests and other controlled sources.www.fsc.org Cert No. SCS-COC-003323©1996 Forest Stewardship Council

To Contact Your Nearest Protector Alsafe:

If you would like to visit the team at Protector Alsafe, there is a branch in every state and territory!

There will be times where we will relocate or open a new branch to improve our services, so please refer to our website www.protectoralsafe.com.au for the latest branch listing.

NEW SOUTH WALESMetroWetherill Park 445-447 Victoria St, Wetherill Park NSW 2164RegionalAlbury 486 Atkins St, Albury NSW 2640Muswellbrook Unit 2/Lot 13 Thomas Mitchell Dr, Muswellbrook

NSW 2333Newcastle Unit 1/41-45 Griffiths Rd, Lambton NSW 2299Wollongong Unit 5/175 Five Islands Rd, Unanderra NSW 2526

AUSTRALIAN CAPITAL TERRITORYCanberra Unit 1/80-82 Kembla St, Fyshwick ACT 2609

QUEENSLANDMetroGeebung 160 Robinson Rd, Geebung QLD 4034Wacol Unit 5/1274 Boundary Rd, Wacol QLD 4075RegionalBlackwater 3 Rufus St, Blackwater QLD 4717Emerald 107 Hospital Rd, Emerald QLD 4720Gold Coast The Albert Centre, Unit 3, 50 Spencer Rd,

Nerang QLD 4211Gladstone 101 Hanson Rd, Gladstone QLD 4680Mackay 14 Corporation Ave, Mackay QLD 4740Moranbah Shop 3 Clements St Plaza, Moranbah QLD 4744Mt Isa 20-32 Sunset Dr, Mt Isa QLD 4825Rockhampton Unit 4/155 Alma St, Rockhampton QLD 4700Townsville 29-31 Dalrymple Rd, Garbutt QLD 4814

SOUTH AUSTRALIAMetroRegency Park 487 South Rd, Regency Park SA 5010RegionalWhyalla Playford 128A Norrie Ave, Whyalla Playford SA 5600

VICTORIAMetroAltona North 471 Grieve Pde, Altona North VIC 3025 (National Office) Dandenong 42 Greens Rd, Dandenong VIC 3175RegionalBallarat 209 Gillies St, North Wendouree VIC 3350Geelong 283-285 Thompson Rd, Geelong VIC 3215Morwell Unit 2/192-208 Princess Dr, Morwell VIC 3840Portland 66 Madeira Packet Rd, Portland, VIC 3305

TASMANIABurnie 10 Wellington St, Burnie TAS 7320Hobart 97 Charles St, Moonah TAS 7009Launceston 160 Invermay Rd, Launceston TAS 7248

NORTHERN TERRITORYDarwin 121 Coonawarra Rd, Winnellie NT 0820

WESTERN AUSTRALIAMetroCanning Vale Unit 3/184-186 Bannister Rd, Canning Vale WA 6155Welshpool 260 Welshpool Rd, Welshpool WA 6106RegionalBunbury 3 Rose St (cnr George St), Bunbury WA 6230 Kalgoorlie 21 Darcy Lane, Kalgoorlie WA 6430Karratha 14 Crane Circle, Karratha WA 6714Newman Shop 4/20 Hilditch Ave, Newman WA 6753Port Hedland Lot 1618A Wilson St, Port Hedland WA 6721Rockingham Unit 3/17 Enterprise Way, Rockingham WA 6168Tom Price Lot 16F Minesite Rd, Tom Price WA 6751

Some products may not be stocked in all branches. Unless otherwise specified by the customer when ordering products, Protector Alsafe Pty Ltd (“Company”) reserves the right to substitute unavailable products or brands with the nearest alternative.

While the Company has made all reasonable efforts to ensure that details given in this catalogue are accurate at the time of publication, full technical specifications are not included and the Company reserves the right to alter specifications, details and information from time to time without notice to customers. Since the use of this information and the conditions in which these products are used are beyond the control of the Company, a user must determine whether the products are suitable for the purpose for which they are to be used, and is responsible for the safe use of the products.

Unless otherwise agreed between the Company and the customer in writing, the products are sold by the Company to the customer pursuant to the “Terms and Conditions of Quotation and Sale” set out on the Company’s website, as amended from time to time (http://www.protectoralsafe.com.au/TermsAndConditions.aspx).

Save for guarantees, warranties and representations which cannot be lawfully excluded or modified, all representations and warranties not expressly set out in this disclaimer or the “Terms and Conditions of Quotation and Sale” are excluded. To the extent permitted by law the Company’s liability in relation to the goods is limited in the manner set out in the “Terms and Conditions of Quotation and Sale”.

If you do not wish to receive any future communications of this type from Protector Alsafe, please contact us in writing at the Marketing Department, 471 Grieve Parade, Altona North, VIC 3025. Protector Alsafe takes no responsibilities for any typographical or other errors which may have occurred during the production of this publication.

Protector Alsafe Pty Ltd ABN 28 007 000 624

Phone us on 132 832 Fax us on 1300 360 765or Visit www.protectoralsafe.com.au

43479 Branch Panel Artworkv2.indd 1 21/10/11 1:08 PM

Loto

Documents

end users

large end

protector

protector

smaller isolation

personal lockout

ball valve

gate valve