Diagram of sink #1 including faucet drillings List Any Changes Made at Imperial Appointment Date: * Any Natural Marks on stone will be addressed with customer at slabview Slab Marks Approved: x ___________________________________ *Seam Locations must be approved prior to fabrication Reveal of Sink: Water Faucet: None L R Faucet Drilling: - Single hole Faucet Model #: Soap Dispenser: Yes Order Date: PO: Standard Overhang: ________ / Island Overhang: ________ Sales Person: Area/Location: Homeowners Phone #: Template Date: Installation Date: date: Contractor/ Job Name: Site Contact Phone #: Range or Cooktop Seam Position Approved: x __________________________ Site Address: Material/Color: Are Ends Paneled? Yes Height of Splash: Are Cabinets Inset? No GD Button: None L R Waterfall Edge detail: Back/ Sidesplash: Per Plan No Doug Davies 1 1/4" STE# 14307 12" Yes No ***Please use email as contact with Imperial and copy me *** ***For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts *** **Explanation of seams in kitchen design has been discussed since there must be seams because of length of stone, length of run & size of island. Seams can be at cook top, sink or other area-determined by fabricator. Site conditions can also be a factor** Sterling:________ date: H/O : Imperial: Page 1 of 2 H/O: ____________________ ____________________ Imperial sales person: Approved by:___________________ Homeowner shown seam for review: Yes / No McKee Group John McGinn #610-500-9564 Preserve @ Marsh Greek Lot#137 Model Type-Wexford Downingtown Pa xxx xx Kitchen Calacatta Michael Angelo gas cook top 6/8/21 48191 Page 1 of 12
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Diagram of sink #1 including faucet drillings
List Any Changes Made at Imperial Appointment
Date:
* Any Natural Marks on stone will be addressed with customer
at slabview
Slab Marks Approved: x ___________________________________
*Seam Locations must be approved prior to fabrication
Reveal of Sink:
Water Faucet: None L R
Faucet Drilling: - Single holeFaucet Model #:
Soap Dispenser: Yes
Order Date:
PO:
Standard Overhang: ________ / Island Overhang: ________
Sales Person:
Area/Location:Homeowners Phone #:
Template Date:
Installation Date:
date:
Contractor/ Job Name:
Site Contact Phone #:
Range or Cooktop
Seam Position Approved: x __________________________
Site Address: Material/Color:
Are Ends Paneled? Yes
Height of Splash:
Are Cabinets Inset? No
GD Button: None L R
Waterfall Edge detail:Back/ Sidesplash: Per Plan No
Doug Davies
1 1/4"
STE# 14307
12"
YesNo
***Please use email as contact with Imperial and copy me ******For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts ***
**Explanation of seams in kitchen design has been discussed since there must be seams because of length of stone, length of run & size of island. Seams can be at cook top, sink or
other area-determined by fabricator. Site conditions can also be a factor**
Sterling:________ date: H/O : Imperial:
Page 1 of 2
H/O:
________________________________________
Imperial sales person:
Approved by:___________________
Homeowner shown seam for review: Yes / No
McKee GroupJohn McGinn #610-500-9564
Preserve @ Marsh Greek
Lot#137Model Type-Wexford
Downingtown Pa
xxxxx
Kitchen
Calacatta Michael Angelo
gas cook top
6/8/21 48191 Page 1 of 12
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
Order Date:
PO:
Sales Person:
Area/Location:
CustomStandard Edges (Circle One)
Contractor/ Job Name:
Eased Straight Polish 1/4" Bevel 1/2" Bevel
Demi Bullnose Half Bullnose 1/8" Bevel 1/4" Round
Doug Davies
STE#14307***Please use email as contact with Imperial and copy me ******For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts ***
Sink Provided by IMG: Yes No ** Farm sink must be installed in cabinetry at template**
______________________________________________________________________________________________________________________________________________________________________________________________________________Radius Corner information at overhangs: 1" /// 3" /// 6"
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x xx x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
xxxxxxxxxxxxxxxxxxxxxxxx
Type text herePO 48191Page 4 of 12
PAG 7 ere 48191 4881911
Designed: 12/30/2020 Printed: 12/31/2020
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.
All dimensions size designations given are subject to verification on job site and adjustment to fit job conditions.
No Scale. Drawing #: 1 All Lot 137 Kitchen Layout PLAN B 12-29-20.kit
McKee BuildersPreserve @ Marsh CreekWexford GMT Model
Gourmet Kitchen
Lot#137
34 1/2" high wall16 1/8"x47 5/8"
WR 3
318B
UTT
VD
AOC3
3249
6BUT
T D.DD
VDO
16 1/8"x47 5/8"
----- 42"-----
----
- 48
"---
--
199"
53 1/2"
ID24"
W2142R CW20"
CW20"
WT
CD
18W
DP1/4 "
Fill
erw
all/b
ase
W33
42B
UT
TW
334 2
BU
TT
WA
2442
L
W2142L
1/4" Fillerwall/base
*NOTE:set Hood AFTER Tile
Shadow Box10) WF3.30
***
*
*
*
*
*
*
*
*- 12"
-
-12"-
to 1 1/4"
PO 48191PAGE 5 OF 12
8191 48819481
Diagram of sink #1 including faucet drillings
List Any Changes Made at Imperial Appointment
Date:
* Any Natural Marks on stone will be addressed with customer
at slabview
Slab Marks Approved: x ___________________________________
*Seam Locations must be approved prior to fabrication
Reveal of Sink:
Water Faucet: None L R
Faucet Drilling: - 8" spreadFaucet Model #:
Soap Dispenser: None L R
Order Date:
PO:
Standard Overhang: ________ / Island Overhang: ________
Sales Person:
Area/Location:Homeowners Phone #:
Template Date:
Installation Date:
date:
Contractor/ Job Name:
Site Contact Phone #:
Range or Cooktop
Seam Position Approved: x __________________________
Site Address: Material/Color:
Are Ends Paneled? Yes
Height of Splash:
Are Cabinets Inset? No
GD Button: None L R
Waterfall Edge detail:Back/ Sidesplash: Per Plan
Doug Davies
1 1/4"
STE# 14307
"
YesNo
***Please use email as contact with Imperial and copy me ******For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts ***
*** th** Note
**Explanation of seams in kitchen design has been discussed since there must be seams because of length of stone, length of run & size of island. Seams can be at cook top, sink or
other area-determined by fabricator. Site conditions can also be a factor**
Sterling:________ date: H/O : Imperial:
Page 1 of 2
H/O:
________________________________________
Imperial sales person:
Approved by:___________________
Homeowner shown seam for review: Yes / No
McKee GroupJohn McGinn #610-500-9564
Preserve @ Marsh Greek
Lot#137Model Type-Wexford
Downingtown Pa
Master Bath
Calcutta Dream
NO
6/8/2148191 PAGE 6 OF 12
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
Order Date:
PO:
Sales Person:
Area/Location:
CustomStandard Edges (Circle One)
Contractor/ Job Name:
Eased Straight Polish 1/4" Bevel 1/2" Bevel
Demi Bullnose Half Bullnose 1/8" Bevel 1/4" Round
Doug Davies
STE#14307***Please use email as contact with Imperial and copy me ******For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts ***
Sink Provided by IMG: Yes No ** Farm sink must be installed in cabinetry at template**
Model Number:________________ Type of sink:____________________
______________________________________________________________________________________________________________________________________________________________________________________________________________Radius Corner information at overhangs: 1" /// 3" /// 6"
* Any Natural Marks on stone will be addressed with customer
at slabview
Slab Marks Approved: x ___________________________________
*Seam Locations must be approved prior to fabrication
Reveal of Sink:
Water Faucet: None L R
Faucet Drilling: - 8" spreadFaucet Model #:
Soap Dispenser: None L R
Order Date:
PO:
Standard Overhang: ________ / Island Overhang: ________
Sales Person:
Area/Location:Homeowners Phone #:
Template Date:
Installation Date:
date:
Contractor/ Job Name:
Site Contact Phone #:
Range or Cooktop
Seam Position Approved: x __________________________
Site Address: Material/Color:
Are Ends Paneled? Yes
Height of Splash:
Are Cabinets Inset? No
GD Button: None L R
Waterfall Edge detail:Back/ Sidesplash: Per Plan
Doug Davies
1 1/4"
STE#14307
"
YesNo
***Please use email as contact with Imperial and copy me ******For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts ***
*** th** Note
**Explanation of seams in kitchen design has been discussed since there must be seams because of length of stone, length of run & size of island. Seams can be at cook top, sink or
other area-determined by fabricator. Site conditions can also be a factor**
Sterling:________ date: H/O : Imperial:
Page 1 of 2
H/O:
________________________________________
Imperial sales person:
Approved by:___________________
Homeowner shown seam for review: Yes / No
McKee GroupJohn McGinn #610-500-9564
Preserve @ Marsh Greek
Lot#137Model Type-Wexford
Downingtown Pa
Hall Bath
Crystal Blue
NO
481916/8/21
Type text herePAGE 8 OF 12
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
dougd
Highlight
Order Date:
PO:
Sales Person:
Area/Location:
CustomStandard Edges (Circle One)
Contractor/ Job Name:
Eased Straight Polish 1/4" Bevel 1/2" Bevel
Demi Bullnose Half Bullnose 1/8" Bevel 1/4" Round
Doug Davies
STE# 14307***Please use email as contact with Imperial and copy me ******For viewing appointments-contact Krystal: [email protected]*** *** Must have the correct layouts ***
Sink Provided by IMG: Yes No ** Farm sink must be installed in cabinetry at template**
Model Number:________________ Type of sink:____________________
______________________________________________________________________________________________________________________________________________________________________________________________________________Radius Corner information at overhangs: 1" /// 3" /// 6"
Purchase is non-refundable after start of fabrication or 7 days from date of purchase, whichever occurs first. Cancellations after template, but before fabrication or 7 days will
be charged $250 template fee. Cancellations cannot be made on non-stock materials once materials arrive in stock. Returns of non-stock materials will be subject to arestocking fee. Restocking fee will depend on fee assessed by importer. Credit card refunds will have 3% processing fee deducted. There will be a $35 charge for all returnedchecks. A finance charge of 1.5% per month (18% annual) will be assessed on all unpaid balances. Accounts requiring collection will be responsible for all attorneys &associated collection fees. All lawsuits must be in PA and under PA laws.
ACCEPTANCE OF PROPOSAL The above prices, specifications and conditions are satisfactory and are hereby accepted. You are authorized to do the work as specified.
Payment will be made as outlined above.
Date Of Acceptance:____________________________ Signature:_______________________________