IjAByq LOR1 work lamps version 09.29 page: 560 Cat. number Accessories bulb H3 12V bulb H3 24V stone guard handle switch Connectors AMP Faston 250 Deutsch DT AMP SuperSeal 1,5 Packaging / pc carton box LOR1.23023 1 LOR1.29923 X 1 LOR1.06223 X X X 1 Cat. number Accessories bulb H3 12V bulb H3 24V stone guard handle switch Connectors AMP Faston 250 Deutsch DT AMP SuperSeal 1,5 Packaging / pc carton box 1 2 4 8 16 32 [lx] 0511 LOR1 Lamp positioning: 10º from the vertical plane h=2,5m Illumination of 1 lux is sufficient light to read a newspaper 12° 12° 180° 180° 140° 10° TOP TOP Ø164 Ø159 64 84 74 185 174 M8 LOR1 TOP IjAByq DIMENSIONS Ij Work lamps are used to illuminate working space near vehicles, tractors, slow-moving machines and any other places where in- dicated voltage is available. Mounting: as a freestanding on body panels. They can be instal- led in an upright or upside down position. Do not use over 55W bulbs if the lamp is equipped with polycar- bonate lens. It is possible to install needed connectors on wire (on request). IjAByq/ ADDITIONAL INFORMATION Ij/ ϕ159x64 H3 70W 12V-24V DC standard 34° IP54 plastic black glass - stone guard handle PC lens switch dimensions: source of light: maximum power: nominal voltage: optics: light distribution angle: IP rating: housing’s material: housing’s colour: lens’ material: built-in connectors: other (optional): TECHNICAL DATA / FEATURES Ij/ IjAByq/