Better Pumps, Better Support | www.lobepro.com | 888-997-PUMP 2610 Sidney Lanier Drive Brunswick, Georgia 31525 1-888-997-PUMP Toll Free (912) 466-0304 Telephone (912) 466-0086 Fax www.lobepro.com LobePro Rotary Lobe Pumps for Drilling Industry • Better R&D. Our focus is on continuously improving our pumps. • Better Pump Selection. We tailor our pumps to your custom requirements. • Better Engineering Support. Our applications engineers are focused on delivering quality drawings and updates on time. • Better Performance. USA made precision parts = low slip and low wear. • Better Testing. EVERY pump tested at duty point! • Better Delivery. 4-6 weeks for bareshaft pumps. 6-8 weeks for systems. • Better Customer Service. 24-7 support - online or by phone. • Better Warranty. 2 years on workmanship and materials. • Better Wear Parts Delivery. Standard wear parts ship in 2 working days or they are FREE. Guarantee applies for 5 years after purchase of LobePro pump. LobePro supplies a standard or customized skid package to meet your needs in the Drilling Industry. LobePro rotary lobe pumps are superior for pumping mud and thick fluids because of their low shearing of drilled solids and ability to run dry. Our maintenance in place design allows for quick and convenient maintenance or replacement of all wear parts without disconnecting from piping, drives or other components. Standard Pump Skids Standard Pump Pump TD PSI 25 PSI 50 PSI Electric Motor Suction/ Discharge Max GPM 12 lb. Mud* Mud-M50 10 HP 3” / 2” 165 140 Mud-M68 15 HP 3” / 2” 250 150 Mud-L133 25 HP 4” / 3” 530 350 * Based on 20-40 cP viscosity. Flow limited by HP. 2” and 3” discharge pipe will limit flow unless kept very short.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Better Pumps, Better Support | www.lobepro.com | 888-997-PUMP
2610 Sidney Lanier DriveBrunswick, Georgia 315251-888-997-PUMP Toll Free(912) 466-0304 Telephone(912) 466-0086 Fax www.lobepro.com
LobePro Rotary Lobe Pumps for Drilling Industry
•BetterR&D. Our focus is on continuously improving our pumps.
•BetterPumpSelection. We tailor our pumps to your custom requirements.
•BetterEngineeringSupport. Our applications engineers are focused on delivering quality drawings and updates on time.
•BetterPerformance. USA made precision parts = low slip and low wear.
•BetterTesting. EVERY pump tested at duty point!
•BetterDelivery. 4-6 weeks for bareshaft pumps. 6-8 weeks for systems.
•BetterCustomerService. 24-7 support - online or by phone.
•BetterWarranty. 2 years on workmanship and materials.
•BetterWearPartsDelivery.Standard wear parts ship in 2 working days or they are FREE. Guarantee applies for 5 years after purchase of LobePro pump.
LobePro supplies a standard or customized skid package to meet your needs in the Drilling Industry. LobePro rotary lobe pumps are superior for pumping mud and thick fluids because of their low shearing of drilled solids and ability to run dry. Our maintenance in place design allows for quick and convenient maintenance or replacement of all wear parts without disconnecting from piping, drives or other components.
Standard Pump Skids
Standard Pump
Pump TD PSI 25 PSI 50 PSIElectric Motor
Suction/ Discharge
Max GPM 12 lb. Mud*
Mud-M50 10 HP 3” / 2” 165 140Mud-M68 15 HP 3” / 2” 250 150Mud-L133 25 HP 4” / 3” 530 350
* Based on 20-40 cP viscosity. Flow limited by HP. 2” and 3” discharge pipe will limit flow unless kept very short.
LARS SealThe LARS Seal (LobePro Affordable Rebuildable Seal) is designed to give you the best of both a cartridge and component seal. Our seals are quick and easy to rebuild in place, depending on which components are useable, while reducing repair cost 50-80% compared to installing a new cartridge seal. Seals are available with electroless nickel or corrosive resistant coated steel, 316 stainless steel or 2205 duplex seals holders and duronit, silicon carbide and tungsten carbide seal faces.
LobePro Featured Parts
Elastomer coated 4-wing helical LobesLobePro’s standard 4-wing helical rotor provides a nearly pulseless flow.
The 4 design results in less slip because 2 or 3 of the wings are always sealing the flow. A 2 or 3-wing design will only have 1 wing sealing the flow. We manufacture a steel core for all our lobes. “Heart of Steel” machined steel cores provide a textured surface for better rubber
adhesion and durability than similar cast iron cores.For the Drilling Industry: LobePro recommends the following lobe
materials:• HNBR: The hydrogenated version of NBR, HNBR exhibits greater
physical strength and has a higher temperature rating and retention properties after long term exposure to heat, oils, and chemicals compared to NBR•FKM: Classified as a fluroelastomer, FKM provides the best
chemical and temperature resistant of LobePro lobe material types
Robust Skid DesignLobePro’s Drilling rig skids are designed with end-user in mind. Just like our pumps, our skids a built to hold-up to the demands of the drilling rig environment.
Related Documents
