Loader and Backhoe Wear & Option Parts Service Instructions and Options. Massey Ferguson FL, 900, 900X, L and DL Series Loaders. CB65, CB75 and CB85 Backhoes. Challenger ML Series and 424, 527, 528, 533 Loaders. Fendt 555, 655, 755, 855, 585, 685, 785, 885 and 524, 727, 728, 833 Loaders.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Loader and Backhoe Wear & Option Parts
Service Instructions and Options.Massey Ferguson FL, 900, 900X, L and DL Series Loaders. CB65, CB75 and CB85 Backhoes.Challenger ML Series and 424, 527, 528, 533 Loaders. Fendt 555, 655, 755, 855, 585, 685, 785, 885 and 524, 727, 728, 833 Loaders.
Parts
Suggestions for Sales and Service 4
Service Instructions for Front Loaders 5
Bushings 6
Pins 6
Maintenance kit 6
Control Cables 7
Joystick Parts 7
Level Indicator Holder 8
Lock & Go 8
Accumulators 8
Plastic Covers 9
Quick Coupling Chart 10
Tines 10
Cutting Edges and Teeth 11
The future is here – Q-companion® 13
Options for High Horsepower Front Loaders 14-17
Options for Utility & Mid-Range Loaders 18
Options for Sub-Compact & Compact Loaders/Backhoes 18-19
Contents
Massey Ferguson FL, 900, 900X, L and DL Series Loaders. CB65, CB75 and CB85 Backhoes.Challenger ML Series and 424, 527, 528, 533 Loaders. Fendt 555, 655, 755, 855, 585, 685, 785, 885 and 524, 727, 728, 833 Loaders.
For the complete range of Wear and Option Parts consult the MUO listing on the dealer portal at my.oneagco/parts/reference material/maintenance/mechanicals
These 5 digits, “underscore” and letters are for finding, tracking, and ordering printed materials and identifying them on AGCOMediaPlace.com.
- 5 digits are the AGCO Parts job number and should be supplied by them.
- Letters are abbreviated “code” for the type of material being printed. Below are examples of how this system works. • 10705_PC = Post Card • 10705_SS = Sell Sheet • 10705_SI = Sign Insert • 10705_A = Ad • 10705_P = Poster • 10705_CC = Counter Card
- When multiple Ads or Post Cards are being done, add an additional letter(s) or number. • 10705_PC1 • 10705_PC2
These 5 digits, “underscore” and letters are for finding, tracking, and ordering printed materials and identifying them on AGCOMediaPlace.com.
- 5 digits are the AGCO Parts job number and should be supplied by them.
- Letters are abbreviated “code” for the type of material being printed. Below are examples of how this system works. • 10705_PC = Post Card • 10705_SS = Sell Sheet • 10705_SI = Sign Insert • 10705_A = Ad • 10705_P = Poster • 10705_CC = Counter Card
- When multiple Ads or Post Cards are being done, add an additional letter(s) or number. • 10705_PC1 • 10705_PC2
Replacing the bushings and pins:Remove worn bushings To remove worn bushings you will need a screwdriver with a sharp blade and a hammer or mallet. In the bushing there is a seam. Insert the screwdriver in the seam, bending the edge until the bushing can be removed.
1. Rotation stop2. Pin Locking3. Bushing
Inserting new bushingsThere are two options to insert new bushings. First, ensurethe bushing is inserted squarely to the pivot point.
Option 1. Add a block of wood between the hammer and bushing edge and tap gently.
Option 2. Using a home-made bushing tool and block keys, screw in both bushings simultaneously.
Replace damaged pins Replace pins which are damaged or do not have a smooth surface. Even a small mark will lead to excessive wear.
These 5 digits, “underscore” and letters are for finding, tracking, and ordering printed materials and identifying them on AGCOMediaPlace.com.
- 5 digits are the AGCO Parts job number and should be supplied by them.
- Letters are abbreviated “code” for the type of material being printed. Below are examples of how this system works. • 10705_PC = Post Card • 10705_SS = Sell Sheet • 10705_SI = Sign Insert • 10705_A = Ad • 10705_P = Poster • 10705_CC = Counter Card
- When multiple Ads or Post Cards are being done, add an additional letter(s) or number. • 10705_PC1 • 10705_PC2
These 5 digits, “underscore” and letters are for finding, tracking, and ordering printed materials and identifying them on AGCOMediaPlace.com.
- 5 digits are the AGCO Parts job number and should be supplied by them.
- Letters are abbreviated “code” for the type of material being printed. Below are examples of how this system works. • 10705_PC = Post Card • 10705_SS = Sell Sheet • 10705_SI = Sign Insert • 10705_A = Ad • 10705_P = Poster • 10705_CC = Counter Card
- When multiple Ads or Post Cards are being done, add an additional letter(s) or number. • 10705_PC1 • 10705_PC2
These 5 digits, “underscore” and letters are for finding, tracking, and ordering printed materials and identifying them on AGCOMediaPlace.com.
- 5 digits are the AGCO Parts job number and should be supplied by them.
- Letters are abbreviated “code” for the type of material being printed. Below are examples of how this system works. • 10705_PC = Post Card • 10705_SS = Sell Sheet • 10705_SI = Sign Insert • 10705_A = Ad • 10705_P = Poster • 10705_CC = Counter Card
- When multiple Ads or Post Cards are being done, add an additional letter(s) or number. • 10705_PC1 • 10705_PC2
Have you Checked the Maintenance Points on the Loader?• Make a Service inspection in less then 5 min using
the Service inspection report at my.oneagco/parts/PM360/inspection sheets
• Use Front Loader Inspection Brochure • Also check the Bushings and Pins Service Brochure • Promote maintenance with the new leaflet
“Maintenance of the loader –Bushings and Pins”
Promote Loader Options• Q-companion® – Weight and Implement positioning
driver support system. -NEW! • SoftDrive® – Better Control, Less Constraints, More
Comfort - Easy to retrofit• LoaderLightTM – Constant Light, Follows the Loader,
Easy to retrofit - Fits all Premium Loaders since 2005 • SelectoFixTM Quick Release Coupler System
Promote Backhoe Options – Stability and Convenience• Street Pads• Big Foot Pads• Thumbs
Display Options and Wear Parts• 10 different pins for the Loader range• 6 different bushings for the Loader and Backhoe range• Plastic covers for the Loader• LoaderLightTM
• Q-companion®
Checking the Front loader when servicing the tractor isn’t an option…It’s good service!
NEW LEAFLETS
11022_B 11021_B 1070511023_B
Maintenance of the loader Bushings and pins SelectoFix LoaderLightTM 5 minute of Front Loader Inspection Q-companion®
The leaflets are available at my.oneagco/parts/reference material/maintenance/mechanicals
5 min
5
1
2
1
2
3
1
2
max XX mm
max XX mm
3
5 !
ON OFF
ON OFF
1
2
!
ON OFF
ON OFF
!
ON OFF
ON OFF
4
!
ON OFF
ON OFF
< 16 mm (0,63 in)> 16 mm (0,63 in)
< 16 mm (0,63 in)
> 16 mm (0,63 in)
Service Instructions for Front LoadersWhy You Should Keep Your Loaders In Good Condition
Bushings and Pins in good condition reduce gaps in pivots and make it easier to perform precision work. They reduce noise and protect the main components like cylinders and loader beams.
For best control for precision work, the Control Cables between the joystick and the loader valve should be smooth to push/pull and the internal gap must be minimum. Control Cables wear out due to high usage and moist or cold temperatures. Check and replace.
An Accumulator loses pre-charge every year due to gas permeation and normal use.
Recommended Service interval is 3000h (tractor/loader use)
Safety Lift arm support device: For extra safety the lift arm support device is recommended to be installed at the lift cylinder rod during service.
Part # ACV0154760
Pins
6
A
ITEM NO ITEM DESC MASSEY FERGUSON CHALLENGER FENDT AGCO REPL. ITEM NO
To avoid abnormal wear it is important that bushings interface with the pin. These bushings, coupled with our galvanzied pivot pins, will ensure the best performance.
Our unique pin locking design reduces the gaps and keeps the grease in place. Replace pins if they are damaged to avoid consequential damages to the loader or tractor.
ITEM NO ITEM DESC
ACP0294970 Grease Cover
ACP0298220 Locking Cover
L
L
Ø
ØB
ITEM NO ITEM DESC ØD L NOTE
A ACP0296240 Pivot pin 30 127 Repl. AL9020034
A ACP0296260 Pivot pin 35 127 Repl. AL9020035
A ACP0296290 Pivot pin 40 127 Repl. AL9020036
A ACP0296250 Pivot pin 30 96 Repl. AL9020037
A ACP0296270 Pivot pin 35 96 Repl. AL9020038
A ACP0296800 Pivot pin 30 84 Repl. AL9020039
A ACP0296280 Pivot pin 35 84 Repl. AL9020040
A ACP0296800 Pivot pin 40 147 Repl. AL9020061
A AL9020100 Pivot pin 30 122
A AL9020105 Pivot pin 30 113
B ACP0293880 Pivot pin 35 127
B ACP0293890 Pivot Pin 40 127
7
Ø 13.9
72
24±2
6
25±2
Ø 13.9
72
Ø 8
A B
A
BA B
Electrodrive LCS Easydrive LCS
Ø 14
Ø 15AL5024366
7
BC
A
A B C
Ø 13.9
72
24±2
6
25±2
Ø 13.9
72
Ø 8
P/N DESCRIPTION LENGTH YEAR
AL5021026 Cable L=1200mm 2010-
AL5021027 Cable L=1400mm 2010-
AL5021028 Cable L=1600mm 2010-
AL5021029 Cable L=1800mm 2010-
AL5021030 Cable L=2000mm 2010-
AL5021031 Cable L=2200mm 2010-
AL5021032 Cable L=2400mm 2010-
AL5021033 Cable L=2600mm 2010-
AL5021034 Cable L=2800mm 2010-
AL5021035 Cable L=3000mm 2010-
AL5021036 Cable L=3200mm 2010-
Control Cables
AL60004086
AL5103100
L=150 AL5103058
L=300 AL5103057
L=350 AL5103083
AL60004085
Electrodrive LCS Easydrive LCS
AL4500353
AL5020374Ø 14
Ø 15AL5024365
Joystick Parts
Our Control cables have significantly less internal gap compared to similar cables even in the longest and most complex cable routings. This design ensures smooth operation and outstanding control for precision work.
P/N DESCRIPTION LENGTH YEAR
AL5021130 Cable L=800mm 1992-
AL5021132 Cable L=1000mm 1992-
AL5020940 Cable L=1200mm (5020351) 1992-
AL5020941 Cable L=1400mm (5020352) 1992-
AL5020942 Cable L=1600mm (5020353) 1992-
AL5020943 Cable L=1800mm (5020354) 1992-
AL5020944 Cable L=2000mm (5020355) 1992-
AL5020945 Cable L=2200mm (5020356) 1992-
AL5020946 Cable L=2400mm (5020357) 1992-
AL5020947 Cable L=2600mm (5020358) 1992-
AL5020948 Cable L=2800mm (5020359) 1992-
AL5020949 Cable L=3000mm (5020360) 1992-
AL5020950 Cable L=3200mm (5020361) 1992-
Ergodrive
AL45000354 AL4500355
Level Indicator Holder Lever indicator holder kit. Four versions depending on cylinder barrel size.
ITEM NO ITEM DESC Ø (MM) FITS TO
AL5215208 Level indicator holder kit 60, 70, 80, 85 The dimension refers to diameter on cylinder barrel
AL5215209 Level indicator holder kit 70, 80, 90, 95 The dimension refers to diameter on cylinder barrel
AL5215210 Level indicator holder kit 90, 100, 110 The dimension refers to diameter on cylinder barrel
AL5221188 Level indicator holder kit 65, 75, 85, 90 The dimension refers to diameter on cylinder barrel
Lock & Go Simply the simplest locking system on the market. Safe and convenient loader locking with semi automatic locking of the loader. No tools required. Maintenance free.
ITEM NO ITEM DESC FITS TO
AL60008017 Lock & Go Replaces AL5212300
8
ITEM NO ITEM DESC PRECHARGE SETTING (BAR) CAPACITY (LITRE)
AL5033772 Accumulator 0.5l-15bar R1/2” 15 0,5
AL5033773 Accumulator 0.5l-22bar R1/2” 22 0,5
AL5034102* Accumulator Lcs 0,5l 15 Bar 15 0,5
AL5045140 Accumulator 0.5l-20bar R1/2 20 0,5
For optimal performance and comfort the accumulators must be replaced when the pre-charge pressure has dropped due to normal gas permeation or damage by other causes.
AL5013853 Sealing Washer Gbr 1/2
AL5215011** Accumulator Bracket Size 1 (S)
AL5215012** Accumulator Bracket Size 2 (M)
AL5215013** Accumulator Bracket Size 3 (L)
**The plastic bracket has 3 different sizes depending on the diameter of the cross tube at the loader.
The innovative system improving the utilization of the new generation of loaders by using state of the art sensor technology and a digital brain on the loader.
The Q-companion® gives the user implement positioning, maintenance reminders and an industry leading weight scale accuracy, all in one integrated system. As an extra support a Cloud service complete with a smartphone App enables the user to further keep track of their loader operation.
The future is here! It’s called Q-companion®
13
My customers are surprised how well it works and how easy it is to use. When I have one in my demo tractor I can easily demonstrate it for
potential customers.
14
As a modern farmer, you are constantly looking for smarter ways to work. Q-companion® is a true operator support system that offers a new level of assistance by combining monitoring of the implement position, loaded weight and maintenance status into one easy to use display. And at the end of the day, you can export your work data and bring it back to the office. Quite simply, Q-companion brings loader work into the digital age, helping you to work smarter.
1. The future is here! It’s called Q-companion®
Rear Sensor Position Front Sensor Position ECU Position on Cross-tube
3. LoaderLight™ LoaderLight™ always gives you a beam of light at the implement level following the movement of the loader. Contains two 10 W heavy duty LED lamps (2x1052 lumen),12 V and 2x0,75 Ampere, IP68.
Part # AL60024312 Compatible with all MF FL Series / Challenger 424, 527, 528, 533 / Fendt 524, 727, 728, 833 loaders
Part # AL60022802 Switch Kit Loader Lights (Includes wiring harness). Required on units not equipped with the Q-companion®
3rd Function: Extra hydraulics for implements that require one hydraulic function. Also available Live 3rd. Consult your AGCO representative.
Part # AL60019997 Field Installed 3rd Function Electric Diverter Valve for MF FL Series 3522,3615, 3723, 3819, 4121, 4124, 4125, 4227, 4327, 4628 / Challenger 424, 527, 528 Fendt / 524, 727, 728. Part # AL60019998 Field Installed 3rd Function (Electric Diverter Valve for MF FL Series 5033 / Challenger 533 / Fendt 833.
1. Q-companion®: With our unique driver support system you will get full control of your daily business. The system consists of a load weighing function that weighs your load while lifting, a status monitor which gives you full control over your implement position and load, and maintenance reminders.
Part # ACP0295670 Compatible with all MF FL Series / Challenger 424, 527, 528, 533 / Fendt 524, 727, 728, 833 loaders.
2. SoftDrive® With SoftDrive® (load damping) you can drive the tractor faster with better control. It also protects your tractor by reducing constraints providing a more comfortable ride.
Part # AL60019601 Field Installed for MF FL Series 3522,3615, 3723, 3819.
Part # AL60019602 Field Installed for MF FL Series 4121, 4124, 4125, 4227, 4327, 4628, 5033 / Challenger 424, 527, 528, 533 / Fendt 524, 727, 728, 833.
Part # AL60019852 SoftDrive® El-Shutoff Wiring Harness with Switch. Compatible with all MF FL Series / Challenger 424, 527, 528, 533 / Fendt 524, 727, 728, 833 loaders as required to operate SoftDrive®.
Options for High Horsepower Front LoadersMF FL Series / Challenger 424, 527, 528, 533 / Fendt 524, 727, 728, 833 loaders
5. Hydraulic Implement Lock: Change the implement, like a bucket, without leaving the driver´s seat. (Requires 3rd function).
Part # AL60019959 For DM width: MF FL Series 3522, 3615, 3723, 3819, 4121, 4124, 4125, 4227, 4327, 4628 / Challenger 424, 527, 528 / Fendt 524, 727, 728 Part # AL60019960 For DL width: MF FL 5033 / Challenger 533 / Fendt 833 Loader
Part # AL60020283 Switch kit required to be used with 60019959 and 6001996
6. SelectoFix™: SelectoFix™ provides simple, problem-free connection of the implement hydraulics, even when pressurized. This provides a rapid, easy, and positive hydraulic connection, with no risk of spillage or leakage.
Part # AL60020543 SelectoFix™ Loader side. Compatible with all MF FL Series / Challenger 424, 527, 528, 533 / Fendt 524, 727, 728, 833 loaders .
Part # AL10550180 SelectoFix™ Implement side.
7. Multi Couplings: Optional quick couplers allow easy hydraulic connection when mounting and removing the loader from the tractor. Different types available HydroQuick, MC4, MC2. Depending on hydraulic system on loader and/or valve, extra conversion kits may be required. Consult your AGCO representative.
LoaderLightTM
1616
1. LoaderLightTM 2. 3rd Function
3. Hydraulic Implement Lock 4. SelectoFix™
6. Multi Couplings
LoaderLightTM
5. SoftDrive®
17
3. Hydraulic Implement Lock: Change the implement, like a bucket, without leaving the driver´s seat. (Requires 3rd function).
4. SelectoFixTM: If your front loader is equipped with 3rd or 4th function, SelectoFix™ provides simple, problem-free connection of the implement hydraulics, even when pressurized.
This provides a rapid, easy, and positive hydraulic connection, with no risk of spillage or leakage.
Part # AL10550380 SelectoFix™ Loader Part # AL10550180 SelectoFix™ Implement
1. LoaderLightTM LoaderLightTM always gives you a beam of light at the implement level following the movement of the loaderContains two 10 W heavy duty LED lamps (2x1052 lumen),12 V and 2x0,75 Ampere, IP68. Compa-tible with all other options except 4th function and ESV valve.
Part # AL5048217
2. 3rd Function: Extra hydraulics for implements that require one hydraulic function. Also available Live 3rd. Consult your AGCO representative.
Part # AL5220451 3rd Function. Electric Diverter Valve for:
Part # AL5220452 3rd Function. Electric Diverter Valve for:
MF 988 Challenger ML88 Fendt 885
5. SoftDrive® (load damping): With SoftDrive® (load damping) you can drive the tractor faster with better control. It also protects your tractor by reducing constraints providing a more comfortable ride.
Part # AL5220655 MF 988 Challenger ML 88 Fendt 885
Part # AL5220526 Electric Shutoff (compatible with 5220651, 5220653, 5220654, 5220655).
6. Multi Couplings: Optional quick couplers allow easy hydraulic connection when mounting and removing the loader from the tractor.
Different types available Hydro-Quick, MC4, MC2.Depending on hydraulic system on loader and/or valve, extra conversion kits may be required.Consult your AGCO representative.
Options for High Horsepower Front LoadersMF 900 Series / Challenger MF Series / Fendt 655, 685, 755, 855, 785, 885 loaders
1818
Options for Sub-Compact & Compact Loaders/Backhoes 1. 3rd Function:Extra hydraulic connection for implements. Only for DL125 / DL135 Loader, Requires wiring harness with Deutch connectorPart # AL60011870
Wiring Harness 3rd Function:Part # AL5102230 -MF 1700 Premium Series Includes KnobPart # AL5102233 -MF 2600 Series, Includes KnobPart # AL5102218 -MF 4600 Series
2. Bucket Level Indicator Set:Bucket Level Indicators keep the load level to the ground. Available field installed for L105E, DL125, DL135, and L135E built prior to factory installationPart # AL60005997 -L105EPart # AL60005998 -DL125, DL135, and L135E
3. SoftDrive® (load damping):With SoftDrive® (load damping) you can drive the tractor faster with better controlIt also protects your tractor by reducing constraints, providing a more comfortable ride. Only for DL125 / DL135 LoaderPart # AL5221420
4. Skid Steer Tool Carrier:Skid Steer Tool Carrier for loaders with Pin On solution Only for DL105E / DL135E Loader
Part # AL5220297F
5. Street Pad Set:Backhoe stabilizer pads with rubber to protect the groundPart # AL6100259
6. Big Foot Pad Set:Backhoe stabilizer pads with bigger pads to protect the groundPart # AL60004498
7. Mechanical Thumb:Backhoe mechanical thumb makes it possible to grab objects with the bucketPart # AL6100070 -CB65Part # AL6100071 -CB75 Part # AL6100072 -CB85
Options for Utility & Mid-Range Loaders
3rd Function:Extra hydraulic connection for implements.Part # AL60010006 - 900X MSL LoadersPart # AL60010007 - 900X NSL Loaders
SoftDrive® (load damping):With SoftDrive® (load damping) you can drive the tractor faster with better control. It also protects your tractor by reducing constraints, providing a more comfortable ride. One kit fits 900x SeriesPart # AL5034241
19
1. 3rd Function 2. Bucket Level Indicator Set
3. SoftDrive® 4.Skid Steer Tool Carrier
5. Street Pad Set 6. Big Foot Pad Set 6. Mechanical Thumb
These 5 digits, “underscore” and letters are for finding, tracking, and ordering printed materials and identifying them on AGCOMediaPlace.com.
- 5 digits are the AGCO Parts job number and should be supplied by them.
- Letters are abbreviated “code” for the type of material being printed. Below are examples of how this system works. • 10705_PC = Post Card • 10705_SS = Sell Sheet • 10705_SI = Sign Insert • 10705_A = Ad • 10705_P = Poster • 10705_CC = Counter Card
- When multiple Ads or Post Cards are being done, add an additional letter(s) or number. • 10705_PC1 • 10705_PC2