Listing Constructional Data Report (CDR) - eMachinesstatic.emachines.com/up/Resource/eMachines/Docs/IN...Listing Constructional Data Report (CDR) Report Number TP11020291-CT Original

Listing Constructional Data Report (CDR)

Report Number TP11020291-CT Original Issued: 8-Mar-2011 Revised: None

Standard(s)

Applicant Manufacturer

Address Address

Country CountryContact ContactPhone PhoneFAX FAXEmail Email

1.0 Reference and Address

Acer Incorporated

+86-21-67747135

Mr. Easy Lai Alice WeiTaiwan

886-2-8691-3000

Information Technology Equipment-Safety-Part 1: General Requirements (ANSI/UL 60950-1:2007 and CAN/CSA-C22.2 No. 60950-1-07, Second Edition, Rev. March 27, 2007)

Alice [email protected][email protected]

No. 68, Sanzhuang Road, SongjiangExport Processing Zone, Shanghai201613

886-2-8691-3285 +86-21-37748168-14259

8F, 88, Sec. 1, Hsin Tai Wu Rd.,Hsichih, Taipei Hsien 221

P.R. China

Tech-Com (Shanghai) ComputerCo., Ltd.

Page 1 of 20

Report No. TP11020291-CTAcer Incorporated

Page 2 of 20 Issued: 8-Mar-2011Revised: None

ProductBrand name

Models

Model Similarity

Ratings

Other Ratings

2.0 Product Description

Notebook Computer1 ) acer, 2 ) emachines

NA

Model ZQJ* is identical to model ZQH* except for the model designation and trademark.Marketing name are Aspire 4250 series and D443 series which is only for the marketingpurpose, no safety consideration.

19 Vdc, 3.42 A

Description

The equipment is a Notebook Computer for use in a general office environment and for indooruse only. The equipment is considered as transportable and Class III equipment.Marketing name are Aspire 4739 series and D729 series which is only for the marketingpurpose, no safety consideration.The equipment is supplied by an approved external switching power supply unit andaccompanies one HDD, one Card Reader, one internal Wireless Module, one internal BluetoothModule, one Web Camera Module and one CPU cooling fan. Also provided with three USBports, one HDMI port (optional), one VGA port, one Microphone-in Jack and one HeadphoneJack.The equipment was submitted and evaluated for maximum manufacturer’s recommendedambient (Tmra) of 35 degree C.The enclosures fixed together by screws and mechanical fixing.Overall approx. 343 mm by 249 mm by 34.4 mm.CPU information: Intel Core i3-380M / 2.53 GHz.

1 ) ZQH*, 2 ) ZQJ* (The “*” can be 0-9, A-Z or blank for the marketing purpose)

ED 16.3.15 (8-Jan-10) Mandatory



Photo 1 - External view of model ZQH, also representative other identical models


3.0 Product Photographs

1

7







7






Photo 6 - Internal view of model ZQH, also representative other identical models

2

3

4





Photo 7 - Internal view of model ZQH, also representative other identical models

Photo 8 - Motherboard

6

12

8

5

10

11





Photo 9 - Motherboard

Photo 10 - Sub board





Photo 11 - Battery pack (representative)

15




Photo# Item

no.1Name

Manufacturer/

trademark2 Type / model2Technical data and securementmeans

Mark(s) of

conformity3

1 1Enclosure (Lowercase, Upper case,panel cover)

MITSUBISHIENGINEERING-PLASTICS CORP

TMB1615+ V-0, min. 1.0 mm thickness, 60 ºC cURus

5 2Enclosure (panelbezel)

BAYER THAI COLTD

FR3002 V-0, min 1.0 mm thickness, 60 ºC cURus

5 3 LCD panel various various14.0” TFT, LED backlight type,Material of LCD screen V-1 min

NR

5 4 Power Switch various various SELV, functional switch NR

7 5 Hard Disk Drive various various 5 Vdc, max. 1.5 A cURus

7 6 Optical Drive various various5 Vdc, 1.8 A max. Laser Class 1,front enclosure rated min. V-1

cURus

2,3 7Connector (USB,RJ45, VGA, HDMIport)

various variousRecognized Component. Plastic.Rated min. V-2, SELV

UL, cUL

7 8 Speaker Module various variousTwo provided. Each 4 ohm, 2.0 Wmax.

NR

1 9External powersupply

various various

Not shown. Listed Component.Optional. I.T.E Power Supply.Rated output 19 Vdc, 3.42 A.Maximum ambient temperaturesat least 35 degree C.

UL, cUL

8 10Printed WiringBoard

various variousRecognized Component. Ratedminimum 94V-1, minimum 105degree C

UL, cUL

8 11 RTC BatteryJHIH HONGTECHNOLOGYCO LTD

CR20323 Vdc, max. abnormal chargingcurrent 10 mA

URus

8 11RTC Battery(alternate)

various CR20323 Vdc, max. abnormal chargingcurrent 10 mA

URus

7 12 CPU Cooling FanADDACORPORATION

AB7305HX-ED3 5 Vdc, 0.5 A, 6.8 CFM min. NR

7 12CPU Cooling Fan(alternate)

DELTAELECTRONICSINC.

MF60090V1-C090-G99

5 Vdc, 0.5 A, 6.1 CFM min. NR


SUNONWEALTHELECTRICMACHINEINDUSTRY CO.,LTD

KSB06105HA 5 Vdc, 0.4 A, 6.06 CFM min. NR


Suzhou ForceconElectric Co., Ltd.

DFS531005MC0T

5 Vdc, 0.5 A, 6.32 CFM min. NR


various various 5 Vdc, max. 0.5 A, min. 6.06 CFM NR

7 13Power DistributionSwitch

Global Mixed-mode TechnologyInc.

G547F2Not shown. 1.0 A, 3.0-5.5 Vdc peroutput channel, SELV, CI. III

URus

7 14Polyswitch (forVGA and HDMIport)

LITTELFUSE INC 1206L110-CNot shown. 6 Vdc, Ih=1.1 A, It=2.2A

URus

7 14Polyswitch (forVGA and HDMIport) (Alternate)

PolytronicsTechnology Corp.

SMD1206P110TF

Not shown. 6 Vdc, Ih=1.1 A, It=2.2A

URus

4.0 Critical Components




Photo# Item

no.1Name

Manufacturer/

trademark2 Type / model2Technical data and securementmeans

Mark(s) of

conformity3

4.0 Critical Components

7 14Polyswitch (forVGA and HDMIport) (Alternate)

ThinkingElectronicIndustrial Co., Ltd.

KMC5S110Not shown. 6 Vdc, Ih=1.1 A, It=2.2A

URus

11 15 Battery packSIMPLOTECHNOLOGYCO., LTD.

AS10D71,AS10D73,AS10D75

11.1 Vdc, 4400 mAh or 48 Wh, 6cells

UL, cUL

11 15Battery pack(alternative)

Sanyo Energy(Taiwan) Co., Ltd.

AS10D31,3ICR19/65-2

10.8 Vdc, 4400 mAh, 48 Wh or10.8 Vdc, 48 Wh, 6 cells

UL, cUL


SAMSUNG SDICo., LTD

AS09D61AS10B61AS10D61

11.1 Vdc, 48 Wh, 6 cells UL, cUL


SONY TAIWANLTD

AS10D4110.8 Vdc, 4400 mAh or 48 Wh, 6cells

UL, cUL


PANASONICENERGYTAIWAN CO.,LTD.

AS10D5110.8 Vdc, 4400 mAh or 48 Wh, 6cells

UL, cUL

7 16 Mylar sheet various variousRecognized Component. Plastic.Rated minimum V-2. Not shown

cURus

4 17 Marking various various

Pressure sensitive adhesive label,located on the bottom enclosure.Contains minimum the followinginformation: Control No., ModelNo., Input rating, as well as ETLand ETLc Marking. Refer toIlluaration 3 for details. Not shown

URus,CSA

3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR"- indicates Unlisted and only visual examination is necessary. "See 5.0" indicates Unlisted components orassemblies to be evaluated periodically refer to section 5.0 for details.

2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securementmeans" and meets the "Mark(s) of conformity" can be used.

1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.




No Unlisted CEC components are used in this report.

5.0 Critical Unlisted CEC Components




2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and displaylamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or othermounting format that prevents turning of the component.

3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or theequivalent.

4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a palstic enclosureconstructed with no openings other than those specifically described in Sections 4 and 5.

5. Grounding - The product is not provided with a means of grounding as it is double insulated by externalpower supply unit.

6. Polarized Connection - This product is provided with a polarized power supply connection. All single poleswitches and fuses are connected only to the ungrounded supply circuit conductor.

7. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminatingin soldered connections are made mechanically secure prior to soldering. Recognized Componentseparable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other typesspecifically described in the text of this report are also acceptable as internal wiring terminals. At pointswhere internal wiring passes through metal walls or partitions, the wiring insulation is protected againstabrasion or damage by plastic bushings or grommets.

8. Schematics - Refer to Illustration No. - for schematics requiring verification during Field RepresentativeInspection Audits.

9. Markings - The product is marked on a component labeling system the with manufacturer's name, tradename or other description marking, catalog or model nember, electrical rating and data of manufacturer.

The following markings in French are required: N/A. No Caution/Warning marking is required on markinglabel.

10. Cautionary Markings - The following are required: N/A. No Caution/Warning marking is required on markinglabel.

11. Installation, Operating and Safety Instructions - Instructions for installation and use of this product areprovided by the manufacturer. Refer to Illustration No(s). 1 for details.

Recognized Component - A component part, which has been previously evaluated by an accredited certificationbody with restrictions and must be evaluated as part of the basic product considering the restrictions as specifiedby the Conditions of Acceptability.

6.0 Critical Features

Unlisted Component - A part that has not been previously evaluated to the appropriate designated componentstandard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing orcomponent recognition.

1. Spacing - In primary circuits, minimum spacing are maintained through air and over surfaces of insulatingmaterial between current-carrying parts of opposite polarity and minimum between such current-carryingparts and dead-metal parts. The equipment is supplied by approved external power supply unit. Only SELVcircuits within the EUT. No spacing is required.

Listed Component - A component part, which has been previously Listed or Certified by an accreditedCertification Organization with no restrictions and is used in the intended application within its ratings.

Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of aproduct that has a direct bearing on the product’s conformance to applicable requirements of the productstandard.Construction Details - For specific construction details, reference should be made to the photographs anddescriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to thespecific construction details described in this Report, the following general requirements also apply.




Illustration 1 - INSTRUCTION MANUAL

Provide with each unit, including the following safety caution:

1. Battery Replacement Marking for RTC Battery and Battery Pack, similar text as below is permitted

7.0 Illustrations




7.0 IllustrationsIllustration 2 - Openings




7.0 IllustrationsIllustration 3 - Marking Label

1. Brand name: 1 ) acer, 2 ) emachines2. Model name: 1 ) ZQH*, 2 ) ZQJ* (The “*” can be 0-9, A-Z or blank for the marketing purpose)3. Input rating: 19 V , 3.42 A

4. ETL Certification Mark and Control Number: 31482795. Standard: CONFORMS TO ANSI/UL STD. 60950-1 CERTIFIED TO CAN/CSA STD. C22.2 NO. 60950-1

(Representative)



Page 17 of 20 Issued: 8-Mar-2011R evised: None

BASIC LISTEE

Address

CountryProduct

MULTIPLE LISTEE 1AddressCountry

Brand Name

ASSOCIATEDMANUFACTURER

AddressCountry

BASIC LISTEE MODELS


Brand Name


AddressCountry

BASIC LISTEE MODELS


Brand Name


AddressCountry

BASIC LISTEE MODELS

Notebook ComputerTaiwan

9.0 Correlation Page For Multiple ListingsThe following products, which are identical to those identified in this report except for model number and Listeename, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program.

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221

MULTIPLE LISTEE 2 MODELS


None


None

None



Page 18 of 20 Issued: 8-Mar-2011R evised: None

10.0 General InformationThe Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance withthe requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorizationprior to using alternate parts, components or materials.

COMPONENTSComponents used shall be those itemized in this Intertek report covering the product, including any amendments

LISTING MARKThe ETL Listing mark applied to the products shall either be separable in form, such as labels purchased fromIntertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark issubject to the control of Intertek.

MANUFACTURING AND PRODUCTION TESTSManufacturing and Production Tests shall be performed as required in this Report.

FOLLOW-UP SERVICEPeriodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shallbe scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to thefollowing:

1. Conformance of the manufactured product to the descriptions in this Report.2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement.3. Manufacturing changes.4. Performance of specified Manufacturing and Production Tests.

In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, theApplicant shall take one or more of the following actions:

1. Correct the non-conformance.2. Remove the ETL Mark from non-conforming product.3. Contact the issuing product safety evaluation center for instructions.

10.1 Evaluation of Unlisted Components

Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writingwhen these components must be selected and sent to the CEC for re-evaluation

Ship the samples to:Intertek Testing Services Taiwan LimitedETL Component Evaluation Center5/F., No. 423, Ruiguang Road, Neihu DistrictTaipei 114, TaiwanAttn: Ms. Yin-lan ChenSample Disposition: Due to the destructive nature of the testing, all samples will bediscarded at the conclusion of testing unless, the manufacturer specifically requests thereturn of the samples. The request for return must accompany the initial component

Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program,Intertek may require these components to be tested and/or evaluated at least once annually, more often forcertain components, as part of the independent certification process. The Unlisted Components in Section 5.0require testing and/or evaluation as indicated.




NA

11.0 Manufacturing and Production TestsThe manufacturer agrees to conduct the following Manufacturing and Production Tests as specified:

Required Tests




Date/ Project Handler/Proj # Site ID Reviewer

None

12.0 Revision SummaryThe following changes are in compliance with the declaration of Section 8.1:

Section Item Description of Change


Listing Constructional Data Report (CDR) - eMachinesstatic.emachines.com/up/Resource/eMachines/Docs/IN...Listing Constructional Data Report (CDR) Report Number TP11020291-CT Original

Documents