Lista Nace (2)

Details... ANSI/NACE Standard RP0104-2004 The Use of Coupons for Cathodic Protection Monitoring Applications

Details... ANSI/NACE Standard RP0204-2004 Stress Corrosion Cracking (SCC) Direct Assessment Methodology

Details... Essentials of Surface Preparation

Details... MR0103   MR0103-2005 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Details... MR0174   MR0174-2001 Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants

Details... MR0176   MR0176-2000 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

Details... NACE MR0175/ISO 15156, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production

Details... NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning

Details... NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

Details... NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

Details... NACE No. 12/AWS C2.23M/SSPC-CS 23.00 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

Details... NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning

Details... NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning

Details... NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning

Details... NACE No. 5/SSPC-SP 12 Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating

Details... NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete

Details... NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning

Details... NACE VIS 7/SSPC-VIS 4 Guide and Visual Reference Photographs for Steel Cleaned by Waterjetting

Details... NACE VIS 9/SSPC-VIS 5 Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning

Details... NACE/SSPC Joint Surface Preparation Standards Package (NACE No 1,2,3,4,5,6,8)

Details... RP0100 RP0100-2004 Cathodic Protection of Prestressed Concrete Cylinder Pipelines Details... RP0102 RP0102-2002 In-Line Inspection of Pipelines Details... RP0169 RP0169-2002 Control of External Corrosion on Underground or Submerged Metallic Piping Systems

Details... RP0170 RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment Details... RP0176 RP0176-2003 Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production Details... RP0177 RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems Details... RP0178 RP0178-2003 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service Details... RP0180 RP0180-2001 Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers Details... RP0185 RP0185-96 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe Details... RP0186 RP0186-2001 Application of Cathodic Protection for External Surfaces of Steel Well Casings

Details... RP0187   RP0187-05 Design Considerations for Corrosion Control of Reinforcing Steel in Concrete

Details... RP0188   RP0188-99 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

Details... RP0189   RP0189-2002 On-Line Monitoring of Cooling Waters

Details... RP0191   RP0191-2002 The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

Details... RP0192   RP0192-98 Monitoring Corrosion in Oil and Gas Production with Iron Counts

Details... RP0193   RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

Details... RP0195   RP0195-2001 Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment

Details... RP0196   RP0196-2004 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

Details... RP0197   RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files

Details... RP0198   RP0198-2004 The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach

Details... RP0199   RP0199-2004 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

Details... RP0200   RP0200-2000 Steel-Cased Pipeline Practices

Details... RP0273   RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids

Details... RP0274   RP0274-2004 High-Voltage Electrical Inspection of Pipeline Coatings

Details... RP0281   RP0281-2004 Method for Conducting Coating (Paint) Panel

Evaluation Testing in Atmospheric Exposures

Details... RP0285   RP0285-2002 Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

Details... RP0286   RP0286-2002 Electrical Isolation of Cathodically Protected Pipelines

Details... RP0287   RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape

Details... RP0288   RP0288-2004 Inspection of Linings on Steel and Concrete

Details... RP0290   RP0290-2000 Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

Details... RP0291   RP0291-2005 Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Details... RP0292   RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

Details... RP0294   RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures

Details... RP0295   RP0295-2003 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

Details... RP0296   RP0296-2004 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

Details... RP0297   RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

Details... RP0298   RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service

Details... RP0300   RP0300-2003 Pilot Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Water Systems

Details... RP0302   RP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service

Details... RP0303   RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control

Details... RP0304   RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines

Details... RP0375   RP0375-99 Wax Coating Systems for Underground Piping Systems

Details... RP0386   RP0386-2003 Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service

Details... RP0387   RP0387-99 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications

Details... RP0388   RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks

Details... RP0390   RP0390-98 Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures

Details... RP0391   RP0391-2001 Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures

Details... RP0392   RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems

Details... RP0394   RP0394-2002 Application, Performance, and Quality Control of

Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating

Details... RP0395   RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

Details... RP0398   RP0398-98 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

Details... RP0399   RP0399-2004 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

Details... RP0402   RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

Details... RP0403   RP0403-2003 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping

Details... RP0472   RP0472-2000 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

Details... RP0475   RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations

Details... RP0487   RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

Details... RP0490   RP0490-2001 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 µm (10 to 30 mils)

Details... RP0491   RP0491-2003 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems

Details... RP0492   RP0492-99 Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes

Details... RP0495   RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

Details... RP0497   RP0497-2004 Field Corrosion Evaluation Using Metallic Test Specimens

Details... RP0502   RP0502-2002 Pipeline External Corrosion Direct Assessment Methodology

Details... RP0572   RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds

Details... RP0575   RP0575-2001 Internal Cathodic Protection Systems in Oil- Treating Vessels

Details... RP0590   RP0590-96 Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking

Details... RP0592   RP0592-2001 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

Details... RP0602   RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

Details... RP0690   RP0690-2004 Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input

Details... RP0692   RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars

Details... RP0775   RP0775-99 Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations

Details... RP0892   RP0892-2001 Coatings and Linings Over Concrete for Chemical Immersion and Containment Service

Details... SPECIALTY PACKAGE: Application of Railcar Coating Systems

Details... SPECIALTY PACKAGE: Cathodic Protection of Pipelines/Tanks

Details... SPECIALTY PACKAGE: Corrosion Control of Rebar

Details... SPECIALTY PACKAGE: RP0285-2002 / API RP 1632

Details... SSPC-VIS 2 Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces

Details... TM0101   TM0101-2001Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems

Details... TM0102   TM0102-2002 Measurement of Protective Coating Electrical Conductance on Underground Pipelines

Details... TM0103   TM0103-2003 Laboratory Test Procedures for Evaluation of SOHIC Resistance of Plate Steels Used in Wet H2S Service

Details... TM0104   TM0104-2004 Offshore Platform Ballast Water Tank Coating System Ev

Details... TM0169   TM0169-2000 Laboratory Corrosion Testing of Metals

Details... TM0172   TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines

Details... TM0173   TM0173-99 Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters

Details... TM0174   TM0174-2002 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service

Details... TM0177   TM0177-96 Laboratory Testing of Metals for Resistance to

Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments

Details... TM0183   TM0183-2000 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment

Details... TM0185   TM0185-2000 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing

Details... TM0186   TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 µm (10 to 30 mils) Dry-Film Thickness

Details... TM0187   TM0187-2003 Evaluating Elastomeric Materials in Sour Gas Environments

Details... TM0190   TM0190-98 Impressed Current Laboratory Testing of Aluminum Alloy Anodes

Details... TM0192   TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments

Details... TM0193   TM0193-2000 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93°C (200°F)

Details... TM0194   TM0194-2004 Field Monitoring of Bacterial Growth in Oilfield Systems

Details... TM0196   TM0196-96 Chemical Resistance of Polymeric Materials by Periodic Evaluation

Details... TM0197   TM0197-2002 Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution (for Oil & Gas Prod. Systems)

Details... TM0198   TM0198-2004 Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service

Details... TM0199   TM0199-99 Standard Test Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler Tubes by the Glass-Bead-Blasting Technique

Details... TM0204   TM0204-2004 Exterior Protective Coatings for Seawater Immersion Service

Details... TM0284   TM0284-2003 Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking

Details... TM0286   TM0286-2001 Cooling Water Test Unit Incorporating Heat Transfer Surfaces

Details... TM0294   TM0294-2001 Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete

Details... TM0296   TM0296-2002 Evaluating Elastomeric Materials in Sour Liquid Environments

Details... TM0297   TM0297-2002 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials

Details... TM0298   TM0298-2003 Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments

Details... TM0299   TM0299-99 Corrosion Control and Monitoring in Seawater Injection Systems

Details... TM0304   TM0304-2004 Offshore Platform Atmospheric and Splash Zone Maintenance Coating System Evaluation

Details... TM0374   TM0374-2001 Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil & Gas Prod. Systems)

Details... TM0384   TM0384-2002 Holiday Detection of Internal Tubular Coatings of Less Than 250 µm (10 mils) Dry-Film Thickness

Details... TM0397   TM0397-2002 Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers

Details... TM0398   TM0398-98 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Above 100°C (212°F)

Details... TM0399   TM0399-99 Standard Test Method for Phosphonate in Brine

Details... TM0404   TM0404-2004 Offshore Platform Atmospheric and Splash Zone New C

Details... TM0497   TM0497-2002 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems

Details... TM0498   TM0498-2002 Standard Test Methods for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes

Details... TM0499   TM0499-99 Immersion Corrosion Testing of Ceramic Materials