1 Links & Linkages Student Engineering Workbook v2.0 Applications in Design & Engineering: Compound Machines What is a Linkage? Instructions: Write the correct answer in each space provided below. 1. A _________________________ is an assembly of links connected by joints or pivots. 2. Linkages can be used to change the _________________________ of motion, _________________________ motion, or to create _________________________ _________________________ to make work easier. 3. Linkages can be any _________________________ or _________________________. Create Different Types of Linkages Place a check in each box as each step is completed. 4. Build and test at least two of the linkages shown on page 2 in the Curriculum Packet. Team Members: 1. 3. Total Points /4 pts Workbook: /25 pts Challenge: 2. 4. Link Link Joint Straight Links Geometric Shaped Links
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
v2.1
Links & Linkages
Student Engineering Workbookv2.0
Applications in Design & Engineering: Compound Machines
What is a Linkage?Instructions: Write the correct answer in each space provided below.
1. A _________________________ is an assembly of links connected by joints or pivots.
2. Linkages can be used to change the _________________________ of motion,
_________________________ motion, or to create _________________________
_________________________ to make work easier.
3. Linkages can be any _________________________ or _________________________.
Create Different Types of Linkages Place a check in each box as each step is completed.
4. Build and test at least two of the linkages shown on page 2 in the Curriculum Packet.
Team Members:
1. 3.
Total Points
/4 ptsWorkbook:
/25 ptsChallenge:2. 4.
LinkLink
Joint
Straight Links Geometric Shaped Links
2
Design & Engineering ChallengeFollow each step in the design & engineering process to develop a solution to the challenge.Place a check in each box as each step is completed. Fill in the blanks when necessary.
Discuss the following items with your team and be prepared to share with the rest of the class. a.Howdidtheteamarriveatthefinaldesignsolution?DiscusshoweachstepintheDesign & Engineering process was used to develop the design. b.Isthedesignrealisticandwell-proportioned?
Design SpecificationDeterminethespecificationsofthecompleteddesign/project.Teamscanusethesespecificationsastheypreparetopresent their design to others.
Challenge EvaluationWhen teams have completed the design & engineering challenge, it should be presented to the teacher and classmates for evaluation. Teams will be graded on the following criteria:
Design and Engineering Process:Didtheteamcompleteeachstepofthedesignandengineeringprocessonpage3?