• 65 tons (60.0 mt) at 9 ft (2.50 m) radius • 38-115 ft (11.6-35.0 m) four section, full power boom with quick reeve boom head • Boom wear pads have Teflon pucks that lubricate the boom sections (no grease) •Two boom extend modes – A-max and standard boom lifting capacities • 35-58 ft (10.7-17.7 m) two piece, on-board lattice fly with 2°, 15°, 30°, and 45° offsets • One 16 ft (4.9 m) lattice insert plus 58 ft (17.7 m) two-piece offsettable fly option • Two 16 ft (4.9 m) lattice inserts plus 58 ft (17.7 m) two-piece offsettable fly option • No deducts for stowed attachments • 211 ft 7 in (64.5 m) maximum tip height • 17,182 lbs (7 793.6 kg) maximum winch line pull • 459 fpm (139.9 m/min) maximum winch line speed • Next generation operator’s cab with improved visibility and ergonomics • 225 hp (168kW) Caterpillar engine with 644 ft-lbs (873J) of torque • Spicer 6-speed power shift transmission • 4x2 and 4x4 drive with 26.5x25-26PR tires • Four steering modes: independent front, combination, crab, and independent rear • 4 link rear suspension with optional hydro-gas suspension • Travel/working weight under 90,000 lbs (40 823.3 kg) 65-ton (60.0 mt) Rough Terrain Crane
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
• 65 tons (60.0 mt) at 9 ft (2.50 m) radius• 38-115 ft (11.6-35.0 m) four section,
full power boom with quick reeveboom head
• Boom wear pads have Teflon pucks that lubricate the boom sections (no grease)
• Two boom extend modes – A-max and standard boom lifting capacities
• 35-58 ft (10.7-17.7 m) two piece,on-board lattice fly with 2°, 15°, 30°,and 45° offsets
• One 16 ft (4.9 m) lattice insert plus58 ft (17.7 m) two-piece offsettablefly option
• Two 16 ft (4.9 m) lattice insertsplus 58 ft (17.7 m) two-pieceoffsettable fly option
• No deducts for stowedattachments
• 211 ft 7 in (64.5 m) maximumtip height
• 17,182 lbs (7 793.6 kg)maximum winch line pull
• 459 fpm (139.9 m/min)maximum winch line speed
• Next generation operator’s cabwith improved visibility andergonomics
• 225 hp (168kW) Caterpillarengine with 644 ft-lbs (873J)of torque
• Spicer 6-speed power shifttransmission
• 4x2 and 4x4 drive with26.5x25-26PR tires
• Four steering modes: independent front, combination,crab, and independent rear
• 4 link rear suspension withoptional hydro-gas suspension
• Travel/working weightunder 90,000 lbs (40 823.3 kg)
65-ton (60.0 mt)Rough Terrain Crane
Remarkable control, reliability and capacity performance• Caterpillar 3126B electronic engine with 225 hp
(168 kW) provides 646 lb-ft (876 Nm) of torque• Electronic throttle for improved throttle response• Two automotive-style batteries linked in parallel
and provide 700 cold cranking amps each for cold weather starting
• Rugged, lightweight steel pontoons• Hydraulic disc brakes for both service brakes and
parking brake• Metri-Pak wire harnesses have sealed relays and
connectors throughout for outstanding long-term reliability. All wires have flame retardant polyethyl-ene insulation, resulting in a higher heat resistant wiring system.
4-section full power boomwith attachment flexibility• Full power 38 ft to 115 ft (11.6 m to 35.0 m)
four-section boom with two extend modes:A-max and fully synchronized
• Boom wear pads have Teflon pucks that lubricate the boom sections (no grease)
• Maximum tip height is 211 ft 7 in (64.5 m)with the attachment and main boom used in combination
• Optional 35 ft (10.7 m) one-piece lattice fl y and optional 35 ft to 58 ft (10.7 m to 17.7 m) two-piece bi-fold lattice fl y are offsettable to 2°, 15°, 30° and 45°.
• Optional 16 ft (4.9 m) lattice insert used alone or with 58 ft (17.7 m) two-piece offsettable fly
• Optional two 16 ft (4.9 m) lattice inserts plus 58 ft(17.7 m) two-piece offsettable fly
Operator cab features• Extra large
front windowalmost seamlessly merges into the roof window
• Sliding left side door,right and rear windows, and swing up top window provide excellent ventilation
• All gauges, switches, indicators, and controlsare placed in the operator’s forward line of sight for excellent ergonomics
• All gauges and switches are backlit for excellent visibility when the cab working lights are switched to the on position
• Integral rated capacity limiter aids operator in safe and efficient operation by continuously monitoring boom length, boom angle, head height, radius of load, machine configuration, allowed load, and percent of allowed load.
• Available — Integrated air conditioning utilizes the same ventilation outlets as the standard heat-ing system
Powerful hydraulics• For greater productivity and control,
the four-pump hydraulic circuit allows simultaneous function of boom hoist, winch and swing.
• Piston motor hydraulic hoist system delivers superior hoisting. Matched sizes of main and auxiliary winches provide equal maximum available line pulls of 17,182 lbs (7 793.6 kg) and maximum line speeds of 459 fpm(140 m/min) on 13" (33 cm) root diameter drums.
Job site maneuverability• CALC — Outrigger beams have three differ-
ent stages (retracted, intermediate, and fully extended) providing lifting capacities in confined areas.
• Steering modes are chosen and performed with the steering wheel and include independent front steer, independent rear, four wheel steer, and "crab" steering.
Link-Belt Construction Equipment Company - Lexington, Kentuckywww.linkbelt.com
® Link-Belt is a registered trademark. Copyright 2005. All rights reserved.We reserve the right to change designs and specifications at any time.Litho in U.S.A. 11/05 345 #4317
65-ton (60.0 mt)Rough Terrain Crane
15453 (supersedes 5429)---0905---J9
RTC---8065 IILink-Belt Cranes
Technical DataSpecifications & Capacities
Telescopic Boom Rough Terrain Crane65 ton (60.0 metric ton)
CAUTION: This material is supplied forreference use only. Operator must refer toin---cab Crane RatingManual andOperator’sManual to determine allowable crane liftingcapacities and assembly and operatingprocedures.
Boom, Attachments, and Upper StructureJJ BoomDesign --- Four section, formed construction of extra hightensile steel consisting of one base section and three tele-scoping sections. The first telescoping section extendsindependently by means of one double---acting, singlestage hydraulic cylinder with integrated holding valves.The second and third telescoping sections extend propor-tionally by means of one double---acting, single stage cylin-der with integrated holding valves and cables.BoomS 38 ft---115 ft (11.6 ---35.0m) four section full power boomS Two mode boom extension: A---max mode provides su-perior capacities by extending the first telescoping sec-tion to 63 ft 8 in (19.4m). Standard mode synchronizesall the telescoping sections proportionally to 115 ft(35.0m). Controlled from the operator’s cab.
S Mechanical boom angle indicatorS Maximum tip height for A---max mode is 73 ft 6 in (22.4m)and standard mode is 123 ft 9 in (37.7m).
Boom HeadS Four 16.5 in (41.9cm) root diameter nylon sheaves tohandle up to eight parts of line
S Easily removable wire rope guardsS Rope dead end lugs on each side of the boom headS Boom head is designed for quick---reeve of the hookblock
Boom ElevationS One double acting hydraulic cylinder with integral hold-ing valve
S Boom elevation: ---3˚ to 78˚Auxiliary Lifting Sheave --- OptionalS Single 16.5 in (41.9m) root diameter nylon sheaveS Easily removable wire rope guardsS Does not affect erection of the fly or use of the main headsheaves
Hook Blocks and Balls --- OptionalS 40 ton (36.3mt) 4 sheave quick---reeve hook block withsafety latch
S 60 ton (54.4mt) 4 sheave quick---reeve hook block withsafety latch
S 70 ton (63.5mt) 5 sheave quick---reeve hook block withsafety latch
S 8.5 ton (7.7mt) swivel and non---swivel hook balls withsafety latch
Fly --- OptionalS 35 ft (10.7m) one piece lattice fly, stowable, offsettable to2˚, 15˚, 30˚, and 45˚. Maximum tip height is 158 ft(48.2m).
S 35 ft---58 ft (10.7 ---17.7m) two piece bi---fold lattice fly,stowable, offsettable to 2˚, 15˚, 30˚, and 45˚. Maximumtip height is 180 ft 5 in (55.0m).
Fly Inserts --- OptionalS One 16 ft (4.9m) lattice insert, equipped with two 16.5 in(41.9cm) root diameter nylon sheaves, to be mountedbetween the boom head and fly options. Maximum tipheight is 196 ft (59.7m).
S Two 16 ft (4.9m) lattice inserts, one equipped with two16.5 in (41.9cm) root diameter nylon sheaves, to bemounted between the boom head and fly options. Maxi-mum tip height is 211 ft 7 in (64.5m).
JJ Operator’s Cab and ControlsEnvironmental Cab --- Fully enclosed, one person cab ofgalvaneal steel structure with acoustical insulationEquipped with:S Tinted and tempered glass windowsS Extra---large fixed front window with windshield wiper andwasher
S Swing up roof window with windshield wiperS Sliding left side door with large fixed windowS Sliding rear and right side windows for ventilationS Six way adjustable, cushioned seat with seat belt andstorage compartment
S Engine dependent warm---water heater with air ducts forfront windshield defroster and cab floor
S Defroster fan for the front windowS Bubble levelS Circulating fanS Adjustable sun visorS Dome lightS Cup holderS Fire extinguisherS Left side viewing mirrorS Two position travel swing lockAir Conditioning --- Optional --- Integral with cab heatingsystem utilizing the same ventilation outlets
2 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
Steering Column --- Pedestal type with tilt and telescopefunctions for operator comfort. Column includes the follow-ing controls and indicators:Left and right levers include:
S Horn buttonS Turn signal switchS Driving light switchS Transmission direction switchPanel mounted switches for:
S Travel park brakeS Steer mode selectorS 2/4 wheel drive/range selectorS Transmission gear selectorS Hazard flasherPanel mounted indicator/warning lights for:
S Transmission temperatureS Engine oil pressureS Travel park brakeS Service brakeS Turn signalsS Rear wheel offset---optionalS Emergency steer --- optionalArmrest Controls --- Two dual axis hydraulic joystick con-trollers or optional single axis hydraulic controllers for:S SwingS Boom hoistS Main rear winchS Auxiliary front winch --- optionalS Drum rotation indicationS Drum rotation indicator activation switchS Winch high/low speed and disable switch(es)S Third wrap selector switch --- optionalS Telescopic override switchesS Warning horn buttonS Swing park brakeOutrigger Controls --- Hand held control box with umbilicalcord gives the operator the freedom to view operation whilesetting the outriggers.Foot ControlsS Boom telescopeS Swing brakeS Engine throttleS Service brakeRight Front Console --- Controls and indicators for:S Engine ignition S Console dimmer switchS Engine throttle lock S Bubble levelS Function disable S 12 volt power connectionS Front windshield wiper S Air conditioning --- optionaland washer S Boom floodlight --- optional
S Cab floodlights S Rotating beacon/StrobeS Warning horn light --- optionalS Heating controls S Third wrap indicator ---
optional
Cab Instrumentation --- Ergonomically positioned, analoginstrumentation for crane operation including:S Engine coolant temperature with warning indicatorS Hydraulic oil temperature with warning indicatorS Fuel level with warning indicatorS TachometerS Transmission temperature with warning indicatorS Voltmeter with warning indicatorRated Capacity Limiter --- Microguard graphic audio---visual warning system integrated into the dash with anti ---two block and function limiter. Operating data availableincludes:S Crane configurationS Boom length and angleS Boom head heightS Allowed load and % of allowed loadS Boom angleS Radius of loadS Actual loadS Operator settable alarms (include):S Maximum and minimum boom anglesS Maximum tip heightS Maximum boom lengthS Swing left/right positionsS Operator defined area (imaginary plane)
Internal RCL Light Bar --- Optional --- Visually informs theoperator when crane is approaching maximum load capac-ity with a series of green, yellow, and red lights.External RCL Light Bar --- Optional --- Visually informs theground crew when crane is approaching maximum loadcapacity with a series of green, yellow, and red lights.
JJ SwingMotor/Planetary --- Bi ---directional hydraulic swing motormounted to a planetary reducer for 360˚ continuoussmooth swing at 2.0 rpmSwing Park Brake --- 360˚, electric over hydraulic, (springapplied/hydraulic released) multi ---disc brake mounted onthe speed reducer. Operated by a switch from the opera-tor’s cab.Swing Brake --- 360˚, foot operated, hydraulic applied discbrake mounted to the speed reducerSwing Lock --- Two---position swing lock (boom over frontor rear) operated from the operator’s cab360˚ Positive Swing Lock --- Optional --- Meets New YorkCity requirement
JJ ElectricalSwing Alarm --- Audio warning device signals when theupper is swinging.LightsS Two working lights on front of the cabS One rotating amber beacon on top of the cab --- optionalS One amber strobe beacon on top of the cab --- optionalS Boom floodlight --- optional
35453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
JJ Load Hoist SystemLoad Hoist Performance
Main (Rear) and Auxiliary (Front) Winches --- 3/4 in (19mm) RopeMaximum Line Pull Normal Line Speed High Line Speed Layer Total
Standard 3/4 19 6x19 IWRC --- right regular lay (Type DB) 16,800 7 620.4Optional 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.4
Auxiliary (Front)Winch
Standard 3/4 19 6x19 IWRC --- right regular lay (Type DB) 16,800 7 620.4Optional 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.4
2M Main and Optional Auxiliary WinchesS Axial piston, full and half displacement (2---speed) motorsdriven through planetary reduction unit for positive con-trol under all load conditions
S Grooved laggingS Power up/down mode of operationS Drum rotation indicator(s)S Drum diameter: 13 in (33.0cm)S Rope length:S Front: 500 ft (152.4m)S Rear: 600 ft (182.9m)
S Maximum rope storage: 657 ft (200.3m)S Terminator style socket and wedgeS Hoist drum cable followers --- optionalThird wrap indicator --- optional --- Visually and audiblywarns the operator when the wire rope is on the first/bottomlayer and when the wire rope is down to the last threewraps
JJ Hydraulic SystemCounterbalance Valves --- All hoist motors, boom extendcylinders, and boom hoist cylinders are equipped withcounterbalance valves to provide load lowering and pre-vents accidental load drop when hydraulic power is sud-denly reduced.
JJ CounterweightTotal of 12,000 lb (5 443kg) of counterweight pinned to theupper structure frame with capacities for the 12,000 lb(5 443kg) configuration
4 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
CarrierJJ GeneralS 10 ft 7 in (3.22m) wideS 14 ft 7 in (4.45m) wheelbase (centerline of first axle tocenterline of second axle)
Frame --- Box---type, torsion resistant, welded constructionmade of high tensile steel. Equipped with front and reartowing and tie---down lugs, tow connections, and accessladders.
JJ OutriggersBoxes --- Two double box, front and rear welded to carrierframeBeams and Jacks --- Four single stage beams with Con-fined Area Lifting Capacities (CALCt) provide selectableoutrigger extensions of full, intermediate, and retracted.Hydraulically controlled from the operator’s cab with inte-gral check valves.Pontoons --- Four lightweight, quick release, 23.5 x 23.5 in(59.7 x 59.7cm), steel pontoons with contact area of 460 in2(2 968cm2) can be stored for road travel in storage rackson the carrier.Main Jack Reaction --- 90,500 lb (41 050kg) force and197 psi (1 358kPa) ground bearing pressure
JJ Steering and AxlesSteering --- Four independent modes consisting of twowheel front, two wheel rear, four wheel, and crab. Eachmode is controlled from the steering wheel and is selectedby a switch in the operator’s cab.Drive --- Two modes: 4 x 2 and 4 x 4 for off highway travelAxle 1 --- Steered, non---driven for 4 x 2 and steered, drivenfor 4 x 4Axle 2 --- Steered, driven
JJ SuspensionFront --- Rigid mount to the carrier frameRear --- The rear axle is suspended on the oscillation cylin-ders with motion of the axle controlled by a four bar linkagesystem. The oscillation cylinders lockout when the upperstructure rotates 2.5˚ past centerline.S Hydro---gas rear suspension --- optional
JJ Tires and WheelsFront and Rear --- Four (single) 26.5 x 25---26 ply rating,earthmover type tires on steel disc wheelsS Spare tires and wheels --- optional
JJ BrakesService --- Full hydraulic, dual circuit, disc type brakes onall wheel endsParking/Emergency --- Spring applied type, acting on frontaxle
JJ ElectricalTwo batteries provide 12 volt starting and operationLightsS Front lighting includes two main headlights and two park-ing/directional indicators.
S Side lighting includes two parking/directional indicatorsper side.
S Rear lighting includes two parking/directional indicators,two parking/brake lights, and two reversing lights.
S Other equipment includes hazard/warning system, cablight, instrument panel light, and signal horn.
JJ EngineSpecification CAT 3126B
Numbers of Cylinders 6
Cycle 4
Bore and Stroke: inch (mm) 4.33 x 5.00 (110 x 127)
Piston Displacement: in3 (L) 442 (7.2)
Max. Brake Horsepower: hp (kW) 225 (167.8) @ 2,200 rpm
Peak Torque: ft lb (J) 644 (873) @ 1,500 rpm
Alternator: volts --- amps 12 --- 130
Crankcase Capacity: qt (L) 29.5 (27.9)
S Mechanically driven fan and thermostatically controlled radiator
JJ TransmissionPowershift --- Three speed with high/low range for 6 for-ward and 6 reverse gears. Front axle disconnect for two orfour wheel drive. Front axle disconnects in high range.
55453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
JJ Carrier Speeds and Gradeability
Spicer Speed Gradeability(@ stall)
Gear Ratio mph km/h % Grade
6thForward &Reverse2WD/Hi
0.82 23.7 38.14 1.9
5th 2.25 9.8 15.77 8.7
4th 4.67 4.8 7.72 20.7
3rdForward &Reverse4WD/Low
2.4 9.2 14.81 9.5
2nd 6.54 3.5 5.63 30.4
1st 13.6 1.7 2.74 80.5
Based on a gross vehicle weight of 88,000 lb (39 916kg).Crane operating angle must not exceed 35˚ (77% grade).
JJ Fuel TankOne 75 gallon (283.9L) capacity tank
JJ Hydraulic SystemAll functions are hydraulically powered allowing positiveprecise control with independent or simultaneous operationof all functions.Main PumpsS One two section fixed displacement gear pump for thefront/rear winches and boom hoist circuits.
S One two section fixed displacement gear pump for theswing/telescope, power steering/outrigger/telescope,service brake, and oscillation circuits.
S Combined pump capacity of 138 gpm (522.4Lpm)Hydraulic Reservoir --- 153 gal (579.2L) capacity equippedwith sight level gauge. Diffusers built in for deaeration.Filtration --- One 10 micron, full flow line filter in the controlcircuit. All oil is filtered prior to return to reservoir. Accessi-ble for easy filter replacement.
JJ Pump DriveAll pumps are mounted on the transmission and mechani-cally driven by the diesel engine.S Front/rear winches and boom hoist pumps can be dis-connected with a manual pump disconnect to aid in coldweather starting --- optional.
6 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
Axle Loads
Base crane with full tank of fuel
Gross VehicleWeight (1)
Upper Facing Front Upper Facing RearFront Axles Rear Axles Front Axles Rear Axles
lb kg lb kg lb kg lb kg lb kg83,952 38 080 39,888 18 093 44,064 19 987 35,690 16 189 48,262 21 891
60 ton (54.4mt) 4---sheave hookblock at boom head 1,109 503 2,883 1 308 ---1,774 ---805 ---1,831 ---831 2,940 1 334
70 ton (63.5mt) 5---sheave hookblock at boom head 1,400 635 3,640 1 651 ---2,240 ---1 016 ---2,312 ---1 049 3,712 1 684
8.5 ton (7.7mt) hook ball at boomhead 360 163 936 425 ---576 ---261 ---595 ---670 955 433
Tire Maximum Allowable Axle Load @ 25 mph (40.2km/h)
26.5 x 25 (26---PR) 51,040 lb (23 151kg)
(1) Adjust gross vehicle weight and axle loading according to component weight.Note: All weights are ±3%.
75453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
General Dimensions
Not To Scale
C of RotationL
C of RotationL
Turning Radius --- Front Wheel (4x2) Steering English MetricWall to wall over carrier 43’ 2” 13.2mWall to wall over boom attachment 53’ 4” 16.3mCurb to curb 41’ 6” 12.6mCenterline of tire 40’ 1” 12.2m
Tail Swing English MetricWith counterweight 13’ 8.25” 4.2m
Turning Radius --- All Wheel (4x4) Steering English MetricWall to wall over carrier 26’ 6” 8.1mWall to wall over boom attachment 38’ 1” 11.6mCurb to curb 24’ 10” 7.6mCenterline of tire 23’ 6” 7.2m
38’ 0” (11.6m)
7’ 0”(2.1m)
1’ 0”(0.3m)
12’ 2”(3.7m)
6’ 10.25”(2.0m)
21.9˚25.2˚
7’ 8”(2.3m)
6’ 11”(2.1m)
12’ 0”(3.7m)
12’ 0”(3.7m)13’ 6.75”(4.1m)
13’ 6.75”(4.1m)
45’ 5.5”(13.9m)
5’ 8.5”(1.7m)
7’ 5.5”(2.3m)@ 0˚
5’ 5.75”(1.7m)@ ---3˚
10’ 2”(3.1m)
9.75”(0.2m)
13.25”(0.3m)
23”(0.6m)
8’ 2.5”(2.5m)
9’ 6.75”(2.9m)
10’ 7.5”(3.2m)
17’ 9.25”(5.4m)
24’ 0”(7.3m)
2’ 7.5”(0.8m)
1’ 3”(0.4m)
12’ 5.75”(3.8m)@ 0˚
10’ 7.75”(3.2m)@ ---3˚
Without counterweight N/A N/A
8 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
Working Range Diagram
15˚OFFSET
10
2040
50
60
70
80
90
100
30110130
120
170
160
150
140
Operating Radius From Axis Of Rotation In Feet (Meters)
Heigh
tInFe
et(M
eters)
Abo
veGroun
d
(3.0)
(6.1)(12.2)
(15.2)
(18.3)
(21.3)
(24.4)
(27.4)
(30.5)
(9.1)(33.5)(39.6)
(36.6)
(51.8)
(48.8)
(45.7)
(42.7)
180(54.9)170
(51.8)160
(48.8)150
(45.7)140
(42.7)130
(39.6)120
(36.6)110
(33.5)100
(30.5)90
(27.4)80
(24.4)70
(21.3)60
(18.3)50
(15.2)40
(12.2)30
(9.1)20
(6.1)10
(3.0)0
95’ (29.0m) +35’ (10.7m)
115’ (35.1m)Mode “B”
105’ (32.0m)
95’ (29.0m)
85’ (25.9m)
75’ (22.9m)
63.6’ (19.4m)Mode “A”
65’ (19.8m)
55’ (16.8m)
38’ (11.6m)Mode “A” & “B”
78˚ MaxBoom Angle
45’ (13.7m)
20˚
30˚
40˚
50˚
60˚70˚
10˚
45˚OFFSET 30˚
OFFSET
10’(3.0m)
8.5’(2.6m)
95’ (29.0m) +58’ (17.7m)
115’ (35.1m) +35’ (10.7m)
190(57.9)
200(61.0)
210(64.0)
220(67.1)
180(54.9)
200(61.0)
190(57.9)
210(64.0)
115’ (35.1m) +58’ (17.7m)
115’ (35.1m) +74’ (22.6m)
115’ (35.1m) +90’ (27.4m)2˚ OFFSET
115’ (35.1m) +16’ (4.9m)
Boo
m+
FlyLe
ngth
InFe
et(M
eters)
Boo
mLe
ngth
InFe
et(M
eters)
C of RotationL
95453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
Boom Extend ModesBoom Mode “A” (A--max)
Boom Mode “B” (Standard)
Only inner mid section telescopes.
Inner mid, outer mid, and tip sectionstelescope simultaneously.
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
115453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
On Tires -- Stationary -- Boom Centered Over Front Between Tire Tracks(All Capacities Are Listed In Pounds)
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
12 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
On Tires -- Pick & Carry (Creep) -- Boom Centered Over Front(All Capacities Are Listed In Pounds)
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
14 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
Fully Extended Outriggers -- 360˚ Rotation(All Capacities Are Listed In Pounds)
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.
16 5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
On Tires -- Stationary -- Boom Centered Over Front Between Tire Tracks(All Capacities Are Listed In Kilograms)
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.
175453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
On Tires -- Pick & Carry (Creep) -- Boom Centered Over Front(All Capacities Are Listed In Kilograms)
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.
195453 (supersedes 5429)---0905--- J9
RTC---8065 IILink-Belt Cranes
Fully Extended Outriggers -- 360˚ Rotation(All Capacities Are Listed In Kilograms)
This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capacities shown onfully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.
5453 (supersedes 5429)---0905--- J9
RTC---8065 II Link-Belt Cranes
Link--Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.comRLink--Belt is a registered trademark. Copyright 2005. We are constantly improving our products and therefore reserve the right to change designs and specifications.