LS 1 Linear Systems ! Textbook: Strum, “Contemporary Linear Systems using MATLAB.” ! Contents 1. Basic Concepts 2. Continuous Systems a. Laplace Transforms and Applications b. Frequency Response of Continuous Systems c. Continuous-Time Fourier Series and Transforms d. State-Space Topics for Continuous Systems 3. Discrete Systems a. z Transforms and Applications b. Frequency Response of Discrete Systems c. Discrete Fourier Series and Transforms d. State-Space Topics for Discrete Systems
27
Embed
Linear Systems - ntut.edu.twjuiching/Linear Systems.pdf · Linear Systems! Textbook: Strum, “Contemporary Linear Systems using MATLAB.”! Contents 1. Basic Concepts 2. Continuous
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
LS 1
Linear Systems
! Textbook: Strum, “Contemporary Linear Systemsusing MATLAB.”
! Contents1. Basic Concepts2. Continuous Systems
a. Laplace Transforms and Applicationsb. Frequency Response of Continuous Systems c. Continuous-Time Fourier Series and
Transforms d. State-Space Topics for Continuous Systems
3. Discrete Systemsa. z Transforms and Applicationsb. Frequency Response of Discrete Systems c. Discrete Fourier Series and Transforms d. State-Space Topics for Discrete Systems
LS 2
Chap. 1 Basic Concepts
Continus V. S. Discrete
Continuous System
Discrete System
LS 3
Unit Impulse
1. A virtual function.2. Any arbitrary analog signal can be decomposed by impulses.3. The response of any analog signal can be decomposed by impulse
responses.
Properties:
(Sifting Property)
Example:
LS 4
Unit Step Function
Representing Signals
a.
b.
LS 5
Conversion between Continuous and Discrete Signals
Sampling Theorem: Let : the maximum frequency component of the signal,
: the sampling frequency. then if the signal can be uniquely represented by the
samples, or the signal can fully recovered from the samples.
LS 6
Chap. 2 Continuous Systems
Basic Concept
Linearity: A system is linear if and only if it satisfies the principle ofhomogeneity and additivity.1. Homogeneity2. Additivity3. Homogeneity and additivity
LS 7
Time Invariance: The same input applied at different times willproduce the same output except shifted in time. That is, for arbitrary
Linear Time-Invariant Systems (LTI): Linear + time-invariant.1. Can be analyzed by Laplace and Fourier transforms.2. In time domain, described by linear differential equations with
constant coefficients. 3. In transform domains, described by linear algebraic equation.
Causality: Output depends on only previous inputs. That is, onlydepends on .
LS 8
Stability: if the input is bounded, the output is also bounded(bounded-input-bounded-output BIBO).
Problems 2.1. Discuss the properties of the following continuoussystems.
a. . (i) Linear? (ii) Time invariant?
b. . Causal or noncausal?
c.
Nth-Order Differential Equation ModelIn general, a single-input-single-output LTI system can be modeledby Nth-order differential equation as follows,
Example:
Initial Condition Solution of a Differential Equation1. Find the homogeneous solution, i.e.
LS 9
Let , substitute this to the above equation. Then,
which is a polynomial called characteristic equation.Let be the roots of the characteristic equation, then
Note: if stable, the real parts of the roots must be negative.The initial condition solution is in the form
where are unknown coefficients to be determined by theinitial conditions
.
Problem 2.2Let
a. Find the system’s characteristicequation.b. Find the root.c. Is the system stable?d. Find the general form of the homogeneous solution.e. Find the initial solution for and .
The Unit Impulse Response Model
Let the input be , and output , then is called impulseresponse. For any input , we have
LS 10
Sifting property:
Stability Definition:
Problem 2.3
a. Find impulse response .b. Is the system stable?
Convolution
Let, , then
Let , then
LS 11
A continuous-time function can be broken up into a summation ofshifted impulse functions.
Suppose an LTI continous system has the response of impulse
1.Time Invariant
2.Homogeneity
3.Additivity
LS 12
4.Let , then
(Convolution Integral)
where “*” is the convolution symbol.
Alternative form:
Example:
LS 13
LS 14
Example:
LS 15
Problem 2.4 , , find by MATLAB.
Analytic solution:
Problem 2.5 Convolution with Impulse functions.
LS 16
Sinusoidal Steady-State Response
What is the output when the input is an AC signal, that is, asinusoidal signal? Since
let,
then,
Let
,
then
LS 17
Conclusion: in general, when a sinusoidal signal
is applied to a stable LTI system, the output is.
That is, the output is also a sinusoidal signal.
Problem 2.6A highpass filter has impulse response
.If
Find .
First, compute .
The input has two frequency components1. : , no output.
LS 18
2. : , the output is
Alternative Path to
Problem 2.7A bandpass analog filter is described by
where is the output and is input.a. Determine the frequency response.b. Find the output of
LS 19
State-Space Model
If there is no derivative term in the input, that is,
we can define
.
Then we can turn the original equation to a set of first-orderdifferential equations:
We call state variables and the following statevector:
. Then, the set of equations become in matrix form
LS 20
A common definition for the state of a system is as follows:The state of a system is a minimum set of quantities
which if known at are uniquely determinedfor by specifying the inputs to the system for . Why?
The M ouputs of a system are related to the states and asingle input by the output equation
where is an M by N matrix and is an M by 1 vector.
Problem 2.8
a. Describe the system in state variable form with and.
b. Find the output equation if and .
LS 21
System Simulation (Numerical Solution Using MATLAB)Consider