LINEAR FLUORESCENT LAMPHOLDERS D1 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION D LINEAR FLUORESCENT LAMPHOLDERS Linear Fluorescent Lampholders FluorescentLamp Shadesand Bases D2 T5 (G5) Miniature Bi Pin D3-D6 T8/T10/T12 (G13) Medium Bi Pin D7-D16 Circline (G10Q/2GX13) Lampholders and Accessories D17-D19 T2 (W4, 3X8, 5d) Lampholders D19 Fluorescent Starter Bases and Starters D20-D21 Fluorescent Lampholder Accessories for T8/T10/T12 D22 Tube Protectors D23 Etlin-Daniels reserves the right to discontinue, modify designs and change specifications without incurring obligation. While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error herein. Copyright 12/2001 Etlin-Daniels
23
Embed
LINEAR FLUORESCENT LAMPHOLDERS · LINEAR FLUORESCENT LAMPHOLDERS D1 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION D LINEAR FLUORESCENT
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
LINE
AR
FLU
OR
ES
CE
NT
LAM
PH
OLD
ER
S
D1
1850 Wilson Avenue, Toronto,Ontario, Canada, M9M 1A1
Ph: 416-741-7336 Fax: 416-741-9104
SECTION DLINEAR
FLUORESCENTLAMPHOLDERS
Linear Fluorescent LampholdersFluorescentLamp Shadesand Bases D2T5 (G5) Miniature Bi Pin D3-D6T8/T10/T12 (G13) Medium Bi Pin D7-D16Circline (G10Q/2GX13) Lampholders and Accessories D17-D19T2 (W4, 3X8, 5d) Lampholders D19Fluorescent Starter Bases and Starters D20-D21Fluorescent Lampholder Accessories for T8/T10/T12 D22Tube Protectors D23
Etlin-Daniels reserves the right to discontinue, modify designs and change specifications without incurring obligation. While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct,no warranty is given in respect thereof and the company shall not be liable for any error herein.Copyright 12/2001 Etlin-Daniels
FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)
LinearFluorescent
Lampholders
D2
FLUORESCENT LAMP SHAPES& LAMP BASES
FLUORESCENT LAMP SHAPES
T-5 Miniature Bipin
T-6 Single Pin Slimline
T-8 Medium Bipin
T-8 Single Pin Slimline
T-10 Medium Bipin
T-12 Medium Bipin
T-12 Single Pin Slimline
T-12 Recessed Double Contact
T-9/T-10 4-Pin Circline
T-8/T-12 Medium Bipin U-Bent
FLUORESCENT LAMP BASES
T-5 MiniatureBipin (G5)
T-8, T-10, T-12Medium Bipin (G13)
T-10, T-12Recessed DoubleContact (R17d)
T-6, T-8, T-12Slimline SinglePin (FA8)
4-Pin Circline(G10Q)
2D 4-Pin (2G13)
T-5
Lam
phol
ders
13.5
[0.5
31]
17.6 [0.691]
22.0 [0.866]
0.3
[0.0
12]
16.5 [0.650]
9.5 [0.374]
2.5
[0.0
98]
26.0
[1.0
24]
5.0
[0.1
97]
3.5 [0.138]
0.140"
(3.5)
Screw Mount
Snap In Mount
0.381" ± 0.008(9.7 ± 0.2)
0.776" ± 0.008(19.7 ± 0.2)
PANEL CUTOUT
FL265 T-5 Snap-In/Screw MountC US
®
®
C US
• White polycarbonate body, rated 110°C• Double edge contacts hold lamp securely• Ideal for mirror cases and display lighting
• Quick connect push-in wireterminals for 18 AWG solid, Twist &Tin, or solder dipped wire, stripped 5¼16"
• Screw mount or snap-in mount intoa 0.020" – 0.040" (0.5 mm – 1 mm)panel thickness
• Rated 75W, 600V• CCSAUS Certified/CULUS Listed
T-5
26.5 1.04
22.2 .87
.6215.8
0.140"
(3.5)
Screw Mount
Snap In Mount
0.381" ± 0.008(9.7 ± 0.2)
0.776" ± 0.008(19.7 ± 0.2) PANEL CUTOUT
FL277 T-5 Snap-In/Screw MountC US
®
®
C US
• White polycarbonate body, rated 110°C• Double edge contacts hold lamp securely• Ideal for mirror cases and display lighting
• Quick connect push-in wireterminals for 18 AWG solid, Twist &Tin, or solder dipped wire, stripped 5¼16"
• Screw mount or snap-in mount intoa 0.024" – 0.047" (0.6 mm – 1.2 mm)panel thickness
• Rated 75W, 600V• CCSAUS Certified/CULUS Listed
T-5
9.0 [0.354]
21.4
[0.8
43]
19.0 [0.748]
10.5
[0.4
13]
11.7 [0.461]
10.3 [0.406]
R3.0 [R0.118]
2.81 [0.110]
0.708"(18.0)
0.125" DIA(3.2)
Suggested Mounting
FL261 T-5 Snap-In MountC US
®
®
C US
• White polycarbonate body, rated 110°C• Double edge contacts hold lamp securely• Ideal for mirror cases and display lighting
• Quick connect push-in wireterminals for 18 AWG solid, Twist &Tin, or solder dipped wire, stripped 5¼16"
• White polycarbonate body, rated 110°C• Double edge contacts hold lamp securely• Ideal for mirror cases and display lighting• Two wire ports per terminal for easy
• Self tapping or through hole mount• Rated 75W, 600V• UL Listed & CSA Certified
0.25(6.35)
0.44 (11.2)
499-Clip for 499 Mount Above
• Available only for Canadian market• Made from stainless steel
• Holds lamp at proper height• Screw mounts to panel
Circline Lam
pholders
FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)
CirclineLampholders
D19
FLUORESCENT LAMPHOLDERSFOR T-2 LAMPS
FLUORESCENT CIRCLINE LAMPHOLDERSG10Q BASE
T10
Y6
0.7
X 4.2
÷
7
Circline Clip
• Minimum required: 3 per lamp• Clips are nickle-plated steel• Holds lamp securely in place
• Standard Clip:X = 1" (25.5 mm)Y = 0.87" (22 mm)
16
16 8.214
.5
10
19
11+0-0.2
3.5
1.75R PANEL CUTOUT
290/V-FF T-2 Base, Screw MountC
• Made from Polycarbonate, rated 125°C• Phosphor bronze contact• Screw mounts into panel horizontally• Lead length is 6" (15 cm), 18 AWG wire
• Screw mounts into 0.140" holes in panel• International ratings available upon request• Other approvals are pending
• Two anti-rotation holes can also be addedfor better stability
• Rated 75W, 600V• UR/cUR Recognized
Sta
rter
Bas
es
FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)
FluorescentStarter Bases
D20
FLUORESCENT STARTER BASES
FSB Series Starter BasesC US
®
®
C US
FS
B-0
02
• Made from high heat polycarbonate• Many mounting methods available• High strength Brass alloy contacts• Quick connect push-in wire terminals accept
18 AWG solid or over tinned leads, stripped1¼2"• White colour is standard; Black is available
upon request, with minimums
• Starter holders may be ordered with leadsattached, subject to minimums
• Rated 660W, 600V• Suggested mounting hole for FSB-001
shown above• CCSAUS Certified/CULUS Listed
22.0
[0.8
66]
24.5 [0.965]
fl 3.5 [fl 0.138]
31.5 [1.240]34
.3 [1
.350
]
11.0
[0.4
33]
30.6 [1.204]
FS
B-0
01TallSnap-InBracket
22.0
[0.8
66]
24.5 [0.965]
fl 3.5 [fl 0.138]
31.5 [1.240]
11.0
[0.4
33]
FS
B-0
02ScrewMount,(2) 0.140Holes
22.0
[0.8
66]
#6-32 TAP
24.5 [0.965]
31.5 [1.240]
11.0
[0.4
33]
FS
B-0
03ScrewMount,(2) #6/32TappedHoles
36.5 [1.437]
22.0
[0.8
66]
8.0
[0.3
15]
46.5 [1.831]
#6-32 TAP
31.5 [1.240]
11.0
[0.4
33]
33.5
[1.3
19]
25.3 [0.996]
FS
B-0
04TallBracket,(2) #6/32TappedHoles
58.6 [2.307]50.8 [2.000]
22.0
[0.8
66]
31.5 [1.240]
fl 3.8 [fl 0.150]
28.6
[1.1
26] F
SB
-005Tall
Bracket,(2) 0.140Holes
36.5 [1.437]44.5 [1.752]
8.0
[0.3
15]
22.0
[0.8
66]
fl 3.3 [fl 0.130]
31.5 [1.240]
12.0
[0.4
72]
FS
B-0
06FlatBracket,(2) 0.130Holes
44.5 [1.752]
36.5 [1.437]
8.0
[0.3
15]
22.0
[0.8
66]
fl 4.0 [fl 0.157]
31.5 [1.240]
12.0
[0.4
72]
FS
B-0
07FlatBracket,(2) 0.157Holes
fl 4.5 [fl 0.177]
8.0
[0.3
15]
52.0 [2.047]44.0 [1.732]
22.0
[0.8
66]
31.5 [1.240]
12.0
[0.4
72]
8.0
[0.3
15]
FS
B-0
08ShortBracket,(2) 0.177Holes
22.0
[0.8
66]
33.7
[1.3
28]
18.6
[0.7
31]
31.5 [1.240]
fl 3.0 [fl 0.118] 8.8 [0.346]
31.8
[1.2
50]
11.0
[0.4
33]
33.6 [1.323]
3.4
[0.1
34]
FS
B-0
09Single LegSnap-InBracket 22
.0 [0
.866
]
33.7
[1.3
28]
18.6
[0.7
31]
31.5 [1.240]
#6-32 8.8 [0.346]
31.8
[1.2
50]
11.0
[0.4
33]
33.6 [1.323]
3.4
[0.1
34]
FS
B-0
10Single LegSnap-InBracket,#6/32TappedHole
Starter B
ases
FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)
FluorescentStarter Bases
D21
FLUORESCENT STARTER BASES& STARTERS
35.6 1.40
12.5
21.0 .83
.49
.94
1.26
24.0
32.0 PANEL CUTOUT
1.2632.0
FSB-268 Starter Base, Top/Bottom Snap-InC US
®
®
C US
• Made from high strength polycarbonate• Can be mounted either above or below surface• Snaps into two holes in panel for quick assembly• For 0.023" - 0.047" (0.6 mm - 1.2 mm)
• These quality long life starters are used to ignite fluorescent lamps• Availaible in plastic or metal can• UL Listed & CSA Approved
Metal Case Plastic Case For Use With
FS-2M FS-2P 14, 15, 20W Linear LampsFS-4M FS-4P 13, 30, 40W Linear LampsFS-5M FS-5P 4, 5, 6, 8W Linear LampsFS-12M FS-12P 32W Circline LampsFS-25M FS-25P 22, 25W Circline Lamps
Acc
esso
ries
FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)
T-8/T-10/T-12LampholderAccessories
D22
FLUORESCENT LAMPHOLDERACCESSORIES FOR T-8/T-10/T-12 LAMPS
37 38 137
138
• 33 - Snap-In Clip for T8 Lamp, made of nickel-plated steel, mounts into 0.314" (8 mm) hole• 34 - Snap-In Clip for T12 Lamp, made of nickel-plated steel, mounts into 0.314" (8 mm) hole• 36 - Screw Mount Clip for T5 Lamp, made of nickel-plated steel, mounts into 0.157" (4 mm) hole• 37 - Screw Mount Clip for T8 Lamp, made of nickel-plated steel, mounts into 0.157" (4 mm) hole• 38 - Screw Mount Clip for T12 Lamp, made of nickel-plated steel, mounts into 0.157" (4 mm) hole• 137 - Screw Mount Clip for T8 Lamp, made of Polycarbonate, mounts into 0.157" (4 mm) hole• 138 - Screw Mount Clip for T12 Lamp, made of Polycarbonate, mounts into 0.157" (4 mm) hole
Lamp Support Clips
T-8 T-12
33 34 36
TL-1 Tube Locks
T-8 T-12
TL-
1
• Made from White heat resistant Polypropylene• Prevents lamps from shattering in fixtures by locking out pins• Simply slides on to most industry T8/T12 lampholders• For high vibration applications
Accessories
FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)
T-8/T-10/T-12LampholderAccessories
D23
FLUORESCENT LAMPHOLDERACCESSORIES FOR T-8/T-10/T-12 LAMPS
Tube Protectors
T-8 T-12
TU
BE
PR
OT
EC
TO
RS
• Provides full protection from lamp breakage or shattering byretaining the glass fragments and phosphors
• Made from high strength extruded Polycarbonate
Warning:
USE ONLY ON T8 LAMPS UNDER THE FOLLOWINGCONDITONS:1. The T8 lamps are used with an electronic ballast that has
end of life shutdown to prevent the overheating of lampsat the end of life.
2. T8 lamps that are operated using a magnetic ballast.
WE DO NOT RECOMMEND USING PROTECTIVESLEEVES ON T8 LAMPS UNDER ANY OTHERCONDITIONS.
FOR END CAP CLEAR TUBE UV FILTERING TUBELAMP TYPE T12 LAMPS T12 LAMPS
F40T12 PAL C 40T12C 40T12CUVF48T12 PAL C 48T12C 48T12CUVF72T12 PAL C 72T12C 72T12CUVF96T12 PAL C 96T12C 96T12CUVF96T12HO PAL C 96T12HOC 96T12HOCUVF96T12VHO PAL C 96T12VHOC 96T12VHOCUV
FOR END CAP CLEAR TUBE UV FILTERING TUBELAMP TYPE T12 LAMPS T12 LAMPS
F15T8 PAL T8 18T8C 18T8CUVF25T8 PAL T8 36T8C 36T8CUVF32T8 PAL T8 40T8C 40T8CUVF96T8 PAL T8 96T8C 96T8CUV