Partner for Performance www.ringfeder.com A C B D Installation, Removal Line Shafts EN 09|2015 Fastening: Clamping hubs | GWZ 5104.1 Fastening: Clamping hubs in flange construction GWZ 5116 Fastening: Clamping hubs in split hub design GWZ 5106 Fastening: Clamping hubs in split hub design GWZ 5106.1
11
Embed
Line Shafts - MultiComponents · Line Shafts Safety instructions Rotating machine parts may injure operators and service staff! Therefore: • Switch off the drive before assembly
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Partner for Performancewww.ringfeder.com
A
C
B
D
Installation, RemovalLine Shafts
EN09|2015
Fastening: Clamping hubs | GWZ 5104.1
Fastening: Clamping hubs in flange construction GWZ 5116
Fastening: Clamping hubs in split hub design GWZ 5106
Fastening: Clamping hubs in split hub design GWZ 5106.1
09.2015 2
TA!!
BA C D
H3
C1 K1
X
EN
Line Shafts
Safety instructions
Rotating machine parts may injure operators and service staff!Therefore:
• Switch off the drive before assembly work.
• Safeguard the machine against accidental switch-on.
• Mount all covers and protection devices before switching on the machine.
• GERWAH® products may only be mounted by specialist staff and for suitable applications.
Attention
• Study the assembly instructions thoroughly.
• Contravention of assembly or safety instructions will void all claims under warranty.
• RINGFEDER POWER TRANSMISSION reserves the right to technical changes to improve the product.
• GERWAH® Line Shafts are accepted state of the art.
• Refer to the current couplings catalogue for data on the required torques.
For any questions or technical problems, please contact our technicians and engineers. See overleaf for contact details.
Used lubricants
Designation CAS-Number (ROHS)
Vaseline 8009-03-8
Legend
Installation
Installation Removal Cleaning
Attention! Absolutely observe!
Refer to the current catalogue for data on the required torques. Please check whether the manufacturer of the machine / plant has specified different torques.