LINCS Project Type - Lighting Supply · 2015. 6. 16. · TheLittle Inch Connecting System (LINCS) sets the standard for flexible, inconspicuous undercabinet lighting.LINCS’ unique
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DescriptionThe Little Inch Connecting System (LINCS) sets the standard for flexible, inconspicuous undercabinet lighting. LINCS’ unique labor-saving plug-together design affords premium quality at a low installed cost. The LED light source with integral electronic driver provides minimal maintenance, quality illumination, and no projected heat. The attractive extruded aluminum design is durable, lightweight and corrosion resistant. The wide variety of finishes and wiring options make LINCS a great choice for both residential and commercial applications.
Additional Features:
• Miniature1"profile
• TheLEDsourceprovides>70%energysavingsoverhalogenwithaCRI of 85 and no projected heat or UV
Construction.060"extrudedaluminumhousingwithinjection molded polycarbonate endcaps and covers.
Reflector & LensAcrylictexturedlenstominimize lamp image on task surface.
Finish LINCS is available in either a white or black polyester powder-coat paint finish. In addition, LINCS canbeselectedwithasatinaluminumfinish.Whitepaintedmodelshavematchingwhiteendcaps.Blackendcaps are provided with the black painted or satin aluminum.
LampsLINCSissuppliedwith1WLEDswithacolortemperatureof3500Kanda85CRI.70% ofinitialilluminationat50,000hours.TheLED board is field replaceable.
Listings UL and CUL Listed for both direct-wired and portable installations. The luminaire is also IBEWlabeled.
Electrical Luminaires are supplied with an integral, electronicLEDdriverfor120vor277vapplications. Optionalpassiveinfraredoccupancysensorcontrol (OSC)available.
Installation MaleandfemalegroundedMolex™ connectors are built into each end for modular, plug-together electrical connection. LINCS can also be connectedwithinterconnectcords.AULrecognized3/8"flexiblemetalconduit/non-metallicsheathedwiring connector is supplied with the luminaire for direct-wiring into knockout in the back of the housing
orthroughadapterplateattheleftend.LINCS100-L19andLINCS100-L28modelshaveawiringaccesspanelwith a knockout to allow quick wiring of the first luminaire without opening the wireway cover. For portable installations, the power cord plugs directly into the left end of the luminaire.
WarrantyAllluminairecomponents(exceptfortheLED board and driver) are warranted against defects during the life of the original installation. The LED board and driver are warranted for 3 years from date of manufacture.
Specifications
OrderingInformation
LINCS100-L10 (3)1WLEDs
LINCS100-L19 (6)1WLEDs
LINCS100-L28 (9)1WLEDs
120277
WHG WhiteGlossyMB MatteBlackSA SatinAluminum
OSC1 Integral occupancy sensor controlRSW2 Rockerswitch(on/off)
Model Number Voltage Finish Options
SampleCatalogNo:LINCS100-L19-120-WHG-RSW (Note: Separate multiple options with a comma.)
Integral occupancy sensor control(OSC)The OSC has a passive infrared
occupancy (PIR) that has a field-adjustable time delay that that can be set for 30 sec., 10 min., 20 min., or 30 min. Connect building power to the LINCS luminaire with the OSC. All additional luminaires interconnected to that luminaire will be controlled by the single OSC.