Lighting the Wall Small enclosed semi-elliptical Solid ...AHB00000 = Hanger bar kit for grid ceilings,includes (2) hanger bars, (4) 1/2-20x3.5"L screws, (8) 1/4-20 K-nuts AMR02050

SG

...there is no equal

24-3/8" (619mm), 36-1/4" (921mm), 48-1/4" (1226mm), 60-1/4" (1530mm),72-1/4" (1835mm), 84-1/4" (2140mm), 96-1/4" (2445mm), 108-1/4" (2750mm)

5-1/16" (129mm)

2-7/8"(73mm)

2"(51mm)

1/8" (3mm) Decorative end plate

3-1/2" (89mm)

ABCDEFGH

K

L

M

J

E

Features Specifications

Performance

Lighting the Wall Small enclosed semi-elliptical

SW17.0

2/19

Style S144

U.S. Patent D459,012. Canadian Patent 93426.

Solid State (LED)

Style S144 1:5 Scale

Top View (S Mount) 1:5 Scale

Hangers (X Mount): Cantilevers

Precisely extruded acrylic lens produces an asymmetric distribution ideal for illuminating vertical surfaces evenly from top to bottom.

■ Inconspicuous low profile – lights entire wall evenly without emphasizing surface imperfections (unlike slot grazers)

■ Compact size with integral driver■ Asymmetric distribution — evenly lights vertical surfaces■ Light engines are serviceable in one foot increments

Finish:Painted surfaces – 6 stage pretreatment and electrostatically applied thermoset powder coat for stable, long lasting and corrosion resistant finish. Extruded aluminum mounting plate, housing, aluminum reveal plates. Reflector and internal end plates. All luminaire hardware – stainless steel.Optic Assembly:Light engine – extruded aluminum heat sink with LED PCB. Multiple mid-power LEDs are tightly spaced to minimize pixelation. Light engines are removable for replacement or upgrade in one-foot increments. Precision extruded optical lens of high temperature, water-clear acrylic. Elliptical distribution holographic diffuser maximizes lateral distribution without disturbing asymmetric distribution.Mounting:S mount – mounting plate fastens flush to ceiling. Unit hinges on plate for hands-free access to wiring.X mount – required hanger assemblies for pendant stem, cable or cantileveer ordered and priced separately (see pg. SW17.1). For shelf supported bridge or cantilever, consult factory.

Pendant stem – 11/16" O.D. aluminum, internally threaded; 5" dia. aluminum canopy. Cable – 1/16" dia. 7x7 aircraft cable, field adjustable length; crossbar with 1/4-20 stud and 5" dia. canopy. Fixture weight: 2.7 lb/ft (4.0 kg/m).Electrical:Use 90°C wire for supply connections. Integral electronic HPF thermally protected Class 2 driver. For complete driver specifications, see website, reference document MA-1303. Driver/wireway compartment includes one conduit entry at each end. Channel cover is removable for access to driver and wiring. Luminaires may be butted end-to-end (connectors by others) for through wiring. Optional #12 AWG prewired modular through-wiring with quick connectors. Optional , compatible dimming controls (by others). See website for dimming compatibility and specifications.Standard:UL listed or CSA certified for dry location. For damp locations, specify DL, DB, DK, or DC option. 5 year warranty, maximum ambient temperature 45°C (113°F).

A Extruded aluminum mounting plate

B Closure screwsC Serviceable light engine

with mid-power LEDs

D Extruded acrylic beam shaping lens

E Optional cross baffle (gray)F Extruded acrylic hinging lens

G High power factor constant current electronic driver

H Extruded aluminum housingJ Aluminum end plates

(required order separately)

K Mounting hole 9/32" (7mm) diameter

L Knockout 7/8" (22mm) diameter

M Aluminum reveal plate

Installation (S mount)Secure mounting plate to ceiling, fasteners by others

Hang housing, connect supply wiring

Hinge closed, secure with screws

Pendant Stems

Cables

3000 Cd

700mA

350mA

3ft fixture

L90(10k) > 60,000 hrs. @ 25°C per TM-21

S I LV E R

D E S I G N J O U R N A L

2 0 1 6

For LM79 and photometric reports, visit thelightingquotient.com

To form a Catalog Number Project: Type:

Certain products illustrated may be covered by applicable patents and patents pend-ing. These specifications supersede all prior publications and are subject to change without notice. Copyright © 2018 Sylvan R. Shemitz Designs, LLC, all rights reserved.

elliptipar from The Lighting Quotient114 Boston Post Road, West Haven, Connecticut 06516, USA Voice 203.931.4455 ■ Fax 203.931.4464 ■ thelightingquotient.com ...there is no equal

SG

0 = UL listed or CSA certified for U.S.J = UL listed or CSA certified for Canada

8 Destination Requirement

9 Color Temperature / CRI

00 = Non-dimmingTD = ERP Tri-Dim forward phase, reverse phase (120V) or

0-10V dimming (120-277V), 100-10% power on forward/reverse phase, 100%-1% on 0-10V, compatible controls by others

ZX = 0-10V analog dimming 120-277V input, dimming range 100%-5%, 0-10V controls by othersEL = eldoLED SOLOdrive 120-277V input, 0-10V analog dimming 100%-0.1% power (controls by others)ED = eldoLED SOLOdrive 120-277V input, dimming range 100%-0.1%, DALI controls by others**Dimming range refers to % power input, % light output will vary. Refer to Driver Information document MA-1303Note: No. of drivers varies with no. of LEDs, drive current and driver type.

10 Dimming**

827 = 2700K, 80+ CRI830 = 3000K, 80+ CRI835 = 3500K, 80+ CRI840 = 4000K, 80+ CRI

927 = 2700K, 90+ CRI930 = 3000K, 90+ CRI935= 3500K, 90+ CRI940 = 4000K, 90+ CRI

Note: Additional CCT and CRI options are available; consult factory.

SW17.1

S = Ceiling (surface) mountX = For use with cantilever, pendant stem, or cable support;

required A4 mounting hangers ordered and priced separately — see hangers at right

Note: Both S and X mount fixtures require ADEA4 end kits, ordered and priced separately.

144 = Small enclosed semi-elliptical linear one-way LED with integral driver

S = Solid state (LED)1 Source

R1 4 4S - - - - -1 2 3 4 5 6 7 8

2/19

Style S144

02 = Semigloss white22 = Matte white99 = Custom RAL or computer matched color to be specified,

consult factory

M = 120-277V Universal voltage inputK = 347V input

2 Style

4 Mounting

5 Finish

6 Voltage

L0 = Clear lens (included in fixture)DL = Clear lens with gaskets for damp locationLB = Clear lens and baffleDB = Clear lens and baffle for damp locationLK = Clear lens and prewired modular through-wiringDK = Clear lens, prewired modular through-wiring, damp locationLC = Clear lens, baffle, prewired modular through-wiringDC = Clear lens, baffle, prewired modular through-wiring, dampLM = For use in MRI medical facility (drivers remote mounted).

MRI filters required on output of each remote driver, ordered and priced separately. Consult factory prior to specification.

7 Option (See Accessories Section for specifications)

- -S

3 Length / Light Output / Power

Required end plates for all fixtures are ordered and priced separately. Required End Plates (all fixtures)

ADEA4 0 = Decorative end plates (pair), one pair required for each individual fixture or row. Specify color to match housing finish at left.

Note: pair adds 1/4" (6mm) to length.

5

Required mounting hangers for X mount fixtures are ordered and priced separately. See installation sheets on website. Singles – order one non-electrical and one electrical feed hanger for each module (X mount). Rows – order one non-electrical hanger for each module (X mount) plus one electrical feed for each row. Cantilever and stem electrical feeds must be located at an end of row. Cable feed can be located at ends or intermediate joints.Consult factory if accessory hangers are required for pool or damp locations.

Required Mounting Hangers (X mount)

A4 18 = Cantilever, 18" (460mm) setback 0 = U.S. J = Canada C = Non-electrical D = Electrical feed

A4 = Pendant stem

0 = U.S. J = Canada Length in inches, up to 60" (1.5m), 6" minimum F = Non-electrical G = Electrical feed

Length ceiling

to top of housing

A4 = Cable support, canopy, field adjustable length 0 = U.S. J = Canada 48 = up to 48" (1.2m) 96 = 48" to 96" (2.4m) R = Non-electrical S = Electrical feed, 18/5 metal braid cord

AHB00000 = Hanger bar kit for grid ceilings,includes (2) hanger bars, (4) 1/2-20x3.5"L screws, (8) 1/4-20 K-nuts

AMR02050 = Accessory Magnetic Resonance imaging filter. 2 conductor up to 5 amps, attenuation > 100dB (5MHz to 10GHz)Note: one filter required per remote driver – consult factory for number of drivers required per luminaire.

5

5Finish

Finish

5Finish

Finish

Accessories

ORDER CODE LENGTH LUMENS INPUT

WATTSNUMBER OF LEDS

DRIVE CURRENT

R02G 2FT 776 7 72 175mAR02L 2FT 1520 14 72 350mAR02M 2FT 2947 27 72 700mAR03G 3FT 1164 10 108 175mAR03L 3FT 2281 20 108 350mAR03M 3FT 4421 41 108 700mAR04G 4FT 1551 14 144 175mAR04L 4FT 3041 27 144 350mAR04M 4FT 5895 54 144 700mAR05G 5FT 1939 17 180 175mAR05L 5FT 3801 34 180 350mAR05M 5FT 7368 68 180 700mAR06G 6FT 2327 20 216 175mAR06L 6FT 4561 41 216 350mAR06M 6FT 8842 82 216 700mAR07G 7FT 2715 24 252 175mAR07L 7FT 5322 48 252 350mAR07M 7FT 10316 95 252 700mAR08G 8FT 3103 27 288 175mAR08L 8FT 6082 54 288 350mAR08M 8FT 11789 109 288 700mAR09G 9FT 3491 31 324 175mAR09L 9FT 6842 61 324 350mAR09M 9FT 13263 122 324 700mA

Based on 3500K/80+CRI. Click here for scaled performance table.

9-

10