Lightgreen Concept Lightgreen Concept 13 Mar 2012 Lightgreen Japan Business Proposal AC Direct LED Driver [ LGC-P1 ] Chemical Condenser-less & Transformer-less Lightgreen Concept 13 Mar 2012 PMIC [LGC-P1], development information and future possibilities. www.lightgreen.be Phase SwitchingでLEDを駆動さ せると、利用効率が50%しかな い問題について
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2
Lightgreen Japan Business Proposal
AC Direct LED Driver [LGC-P1]
Chemical Condenser-less
& Transformer-less
Lig
htg
ree
nC
on
ce
pt
13 Mar 2012
PMIC [LGC-P1], development information and future possibilities.
www.lightgreen.be
Phase SwitchingでLEDを駆動させると、利用効率が50%しかない問題について
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2Key Technology
Paradigm Shift : for AC Direct LED Driving
LED用電源の新しい考え方
AC交流 SMPSで直流(DC)電圧生成 PWMで電流制御 LED発光
Digital Technology
Pulsating 脈流をデジタルで制御
従来の手法
新しいの手法 : 交流直接駆動方式(AC Direct Driving)
LGCのAC Direct LED Driving技術とは、ACを直接取り入れデジタル制御して、LEDに最適な電圧と電流を供給することで、力率と効率を最適化するものである。特徴として、SMPSに欠かせない電解コンデンサーと高調波トランスを使わずに済む。
電圧と電流を同時制御
交流直接駆動方式についてもう一度説明2
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2
ACInput
Ambient light sensor
PLC Modem Signal
V Detect
LED Driving
* Patent 登録中
H bridge V Up-Down Output Technology : HVUD Power Block
P1
4つのグループに分けて制御
3
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2Key Technology
LEDの通電量
LEDには定格電流基準があり、パルス順電流は定格順電流より高く設定されている。 4
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2Key Technology
LEDのパルス点灯方式
パルス点灯はデューティ比で明るさを制御するが、P1チップは1ms以下の短い時間で設定されている。
1msより同じか、もしくは短いのであればDC
電圧と同じであると認める。
5
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2
LED : ソウル半導体 STW8Q14BEの場合
http://www.acriche.com/kr/
6
Key Technology
LEDのスペックから、動作条件を見ると、IF=100mAなのが分かる。
Lightgreen ConceptL
igh
tgre
en
Con
ce
pt
13
Ma
r 2
01
2
[2] IFM was measured at Tw≤1 msec of pulse width and D≤1/10 of duty ratio.
If there were ‘n’ amount of LEDs from A to D, this is a patented circuit which turns on the switch relevant to the voltages needed in each group, which will activate the LED by detecting each voltage, current and sensor.Even with different voltages in each groups, the needed values are read accurately, there fore even if the property of the LED changes, it activates accordingly.Also, the needed voltage values for each LED groups are PWM controlled, and with inserted temperature sensor, precise dimming control and long life LED is possible.It is successfully energy saving, compact and long lasting.