Lewis Immersible Ultrasonic Systems Ultrasonic Cleaners Enviro Smart Power, Versatility and Reliability Typical Unit Configuration A. Surface Diaphragm B. Ultrasonic Transducers (inside box or can) C. Conduit and cable to generator A B C Industrial process cleaning requirements are more stringent than ever as manufacturers continue to strive for higher levels of quality. Increasingly, companies are turning to Lewis Immersible Ultrasonic Cleaning Systems for the poser and performance they require to meet new quality control standards…and for good reason! Lewis Immersibles simply keep on delivering dependable cleaning power day after day, month after month, year after year. The Immersible advantage Lewis Ultrasonic Cleaners are stainless steel boxes or “cans: which have a radiating surface called a diaphragm. Brazed to the inside of this surface are powerful transducers which produce ultrasonic frequency energy. When immersed in a liquid-filled tank, the pressure waves generated by the transducers flex the diaphragm plate causing cavitation in the liquid. Cavitation performs the powerful scrubbing action inherent in the ultrasonic cleaning process. Immersibles allow users to upgrade less effective cleaning systems without the expense of replacing configuration, including bottom or side mounting. Immersibles work nicely in large tanks, especially when mounted in tandem. Finally, they are safe in explosive environments and afford flexibility in process planning techniques. Standard Features • Transducers are not crystals. They are magnetostrictive nickel alloy units permanently silver-brazed to a heavy 316L stainless steel plate diaphragm. • Transducers are guaranteed for ten years not to fail or degrade, In fact, not one has ever failed. • Transducers are designed for heavy-duty continuous performance. They withstand abuse and high temperature operation. • Generators are reliable and not load sensitive, built to deliver years of proven service. • Immersible transducers can be installed in opposing configurations for high intensity cleaning applications. • For difficult cleaning situations. Stoelting offers the ultimate in high-density cleaning with opposed transducer systems operating at differing frequencies (i.e. 16kHz and 20kHz). ISO 9001:2008 Registered | STMC-208 4/13 stoeltingcleaning.com | 502 Highway 67 | Kiel, WI 53042-1600 800-545-0661 | (920) 894-2293 | Fax: (920) 894-7029 | E-mail: [email protected] Cleaning Systems Engineering Many ultrasonic cleaning application have special requirements. The company’s experienced Sales Engineering staff is available for consultation at all times to assist each customer in the specification of the proper equipment, power levels, chemicals, and arrangement of immersibles to deliver optimum ultrasonic cleaning performance. For unusual conduit configurations, send a sketch and our engineers will design a system to meet your requirements. Stoelting manufactures magnetostrictive ultrasonic and non-ultrasonic cleaning equipment for a variety of applications: • Small to large size Ultrasonic Cleaners • In-line Strip / Wire / Cable Cleaners • Multistage Consoles • Conveyorized In-line Ultrasonic Cleaners • Rotating / Turbo Jet Washers • Semi and fully Automated Cleaning Systems STOELTING WARRANTY The transducer-to diaphragm silver-brazed bond and transducers are warranted by Stoelting not to separate, crack, or degrade in any way under normal conditions of handling and use by the original purchaser for ten (10) years. In addition, Stoelting provides a one-year warranty on all other Stoelting- fabricated materials and workmanship. Purchased components are warranted to the full extent by their manufacturer. Stoelting accepts the responsibility of repairing or replacing at its factory any part or parts which do not conform to above warranties when the unit is returned prepaid. In no event shall Stoelting be liable for consequential damages for failure of any equipment to perform.