-1111 2 -1112 2 Leveling Mounts / Antivibration Attachments Antivibration Mounting Plates / Mounting Nuts / Protection Caps for Leveling Mounts Part Number - t AJPNF20 - 4.5 Part Number FJKMT12 QHold Down Plates for Leveling Mounts - Thick Type Hold Down plates may not be used at 4 places depending on installation conditions of equipment and machines. In that case, using Thick Type prevents disengagement and displacement, and produces equivalent effects with fewest mounting plates. Leveling Mount AJPNF Machine Machine Obstacle Steel AJPNF AJKNF Stainless Steel AJPNFS AJKNFS t 16 50 K/2 K/2 K Ø14 B 20 L C B A D L1 Part Number t D A B K C L L1 Applicable Leveling Mount Unit Price Type No. Plate Thickness Steel Stainless Steel AJPNF (Steel) AJPNFS (Stainless Steel) 16 4.5 29 37.5 17 50 28.5 115 72 NFJN16 (P.1107) 6 30 20 4.5 36 45.5 21 60 28.5 125 77.5 NFJN20 (P.1107) 6 30 AJKNF (Steel) AJKNFS (Stainless Steel) 16 4.5 29 37.5 17 50 24.5 115 72 FJFN16 (P.1110) 6 26 20 4.5 36 45.5 21 60 24.5 125 77.5 FJFN20 (P.1110) 6 26 EPlate thickness may vary up to -10%. Type MMaterial SSurface Treatment AJPNF, AJKNF SS400 Trivalent Chromate AJPNFS, AJKNFS SUS304 - Q Hold Down Plates for Leveling Mounts A L1 L 50 8 20 B 25 25 50 C t Ø14 Steel FJKPF FJKPN FJKPG Stainless Steel FJKPFS FJKPNS FJKPGS Type MMaterial SSurface Treatment FJKP# SS400 Trivalent Chromate FJKP#S SUS304 - Part Number - t FJKPN16 - 3.2 Q Protection Caps for Leveling Mounts AJCP L2 L1 D L d1 d2 MMaterial: EPDM EFor orders larger than indicated quantity, please check with WOS. E20 pcs. per pkg. Part Number Color D L d1 d2 l1 l2 Applicable Screw Size (Coarse Thread) Unit Price Volume Discount Rate Type No. 1 ~ 9 pkg(s). 10~20 AJCP 8 B (Black) 11 35 5.5 7 10 20 M6, 8 12 16.5 9.5 11.5 M10, 12 20 24.5 15.5 19.5 M16, 20 ∙ Can be used to protect exposed threaded portions. ∙ Select according to size of M threads. ∙ Easy installation due to its flexibility. (FJTP) (FJKPN) Adjusting Nut Hold Down Plate Part Number - B FJTP16 - 80 Part Number B C D E F G d Unit Price Type M (Coarse) FJTP 12 40 40 28 28 2 9 6 60 42 22 8 16 50 50 36 36 3.2 12 80 56 26 20 50 36 36 17.5 80 56 26 Q Mounting Nuts for Leveling Mounts FJTP M B D E C F G 4-d QFeatures Hex nuts do not fall off as they are swaged on. MMaterial: SS400 SSurface Treatment: Trivalent Chromate MMaterial: SS400 SSurface Treatment: Bright Chromate Plating Part Number FJFNV16 -75 Part Number t Thickness A B C L L1 Applicable Leveling Mount Unit Price Type No. FJKP# FJKP#S FJKP# FJKP#S FJKPF (Steel) FJKPFS (Stainless Steel) 12 2 3.2 2 22.5 19 22 95 65 NFJN12 (P.1107) 12L 130 100 16 25 24 24 95 65 NFJN16 (P.1107) 16L 130 100 20 28 30 95 65 NFJN20 (P.1107) 20L 130 100 FJKPN (Steel) FJKPNS (Stainless Steel) 12 2 3.2 2 22.5 19 20 95 65 FJFN12 (P.1110) 12L 130 100 16 25 24 95 65 FJFN16 (P.1110) 16L 130 100 20 28 30 95 65 FJFN20 (P.1110) 20L 130 100 FJKPG (Steel) FJKPGS (Stainless Steel) 12 2 3.2 2 22.5 19 25 95 65 FJGN12 (P.1108) 12L 130 100 16 25 24 27 95 65 FJGN16 (P.1108) 16L 130 100 EFor FJKPN and FJKPNS, t=2 when t dimension is not specified. A 95 20 B 25 25 50 22 1.6 8 Ø14 FJKMT QEconomy Type FJFNV Detail of Rubber Part M(Coarse) 1 2 60 10 (8) A L E B L1 L2 FJFNVC (Non-migration Rubber Type) QAntivibration Effect This product's antivibration effects (vibration transmissibility) heavily depend on applied loads and frequency of supported objects (natural frequency). The graph on the right shows anticipated antivibration effects of this product calculated from freque QHow to Select 1Calculations of Applied Load per Unit Ex) When an object of 2000 kg is supported by 4 points, 2000/4=500(kgf) 2Evaluation of the natural frequency of the object. Frequency = Vibrations per Second Ex) When motor speed is 7200rpm, 7200(rpm)/60(s)=120(Hz) With data obtained from 1 and 2 plotted on the graph, applicable screw diameter (M) and vibration transmissibility under above condition are found. 0 50 100 150 200 0 500 1000 1500 Support Load per Unit (kg) Antivibration Effect (Reference) Frequency (Hz) Ex.) When FJFNV10 is selected with 500kgf per-foot supported load, 125Hz or more vibration transmissibility is reduced to 1/30 at most. M10 M10 M10 M12 M12 M12 M16 M16 M16 1/30 1/10 1/3 1/30 1/10 1/3 1/30 1/10 1/3 Nominal Tr (Vibration Transmissibility) KMBU KMBS A A D d1 F F S M (Part for Mounting Tip of Leveling Mount) (37) L 4-d t1 t2 L1 B QAntivibration Effect Q Q Q Q Q q 6 8 10 12 16 20 6 8 10 12 16 20 6 8 10 12 16 20 Tr=1/3 Tr=1/10 Tr=1/30 M (Nominal) 0 100 200 300 400 Support Load per Unit (kg) Frequency (Hz) 100 80 60 40 20 0 M6 M6 M8 M10 M12 M16 M20 M8 M10 M12 M16 M20 Ex. If KMBU(S)12 is selected with supported load to be 150kg per foot, transmissibility for vibrations above 30Hz is reduced to 1/3 or less. Ex. If KMBU(S)6 is selected with supported load to be 50kg per foot, transmissibility for vibrations above 40Hz is reduced to 1/10 or less. E All values are calculated, and not guaranteed. QFeatures · Suitable for vibration countermeasures for vibratory equipment and machinery. · Can be used with Leveling Mounts with less than 5° inclination. · Damper will not stain floor since not in contact with the floor. QHow to Select This product's antivibration effects (vibration transmissibility) heavily depend on applied loads and frequency of supported objects (natural frequency). The graph on the right shows anticipated antivibration effects of this product calculated from freque 1Calculations of supported load per attachment. Ex) When an object of 600 kg is supported by 4 shafts, 600/4 = 150 (kgf) 2Evaluation of the natural frequency of the object. Frequency = Vibrations per Second Ex) When motor speed is 1800 rpm, 1800 (rpm)/60 (s) = 30 (Hz) With data obtained from 1 and 2 plotted on the graph, appropriate type of the attachment and vibration transmissibility under above condition are found. Part Number MMaterial SSurface Treatment HHardness KMBU Plate SPCC Trivalent Chromate - Main Body S45C Damper Chloroprene Rubber - Shore 60 KMBS Plate SUS304 - - Main Body Damper Chloroprene Rubber Shore 60 E* M16 and 20 are available for KMBU only. Part Number Damper Hardness Main Body Hold Down Plate Vertical Load (kN) Mass (g) Unit Price Type M L D d1 S t1 B l1 A F t2 d KMBU KMBS KMBU KMBS 6 N 42 45 40 28 2.5 10 3.5 80 60 2.3 8.5 1 260 8 43 55 50 30 3.5 13 5 1.5 340 10 44 60 55 31 17 6 3.2 10.5 2 420 12 72 67 32 19 7 100 80 2.5 630 *16 44.5 88 83 33 24 10 115 90 4 12.5 3 1000 - *20 45 103 98 34 4 30 12 3.5 1220 - Part Number - Damper Hardness KMBU10 - N KMBU KMBS Leveling Mount (NFJN, FJFN) Equipment vibrations are suppressed by the damper effect. QAntivibration Attachments Part Number - Color AJCP12 - B Mounting on Tip of Leveling Mounts Type 1Main Body 2Rubber Part MMaterial SSurface Treatment MMaterial HHardness FJFNV FC250 (Screw, Nut SS400) Trivalent Chromate Chloroprene Rubber Shore A70 (M10, 12) Shore A90 (M16) FJFNVC Non-Migration Chloroprene Rubber (Gray) Part Number L l1 l2 E B Vertical Load Range (kN) Mass (g) Unit Price Type M-A FJFNV FJFNVC FJFNV FJFNVC 10-75 100 7 8 18 17 2.0~7.0 322 10-100 125 333 12-75 101 8 10 19 3.0~10.0 342 12-100 126 360 12-125 151 379 12-150 176 395 16-75 103 10 13 24 3.5~12.0 438 16-100 128 449 16-130 158 508 16-150 178 536 16-180 208 574 Part Number A B L Unit Price Type No. 1 ~ 100 pcs. FJKMT 12 22.5 19.3 95 16 25 24.5 20 28 31.0 EFor orders larger than indicated quantity, please check with WOS. Note that, for some of the types shown here, order might be unable to be received by the MISUMI Malaysia, Indonesia and/or India offices.