LESSON PLAN - gpwsirsa.edu.ingpwsirsa.edu.in/files/wirelessLESSON PLAN OF 6th SEM. ECE.pdfLESSON PLAN Faculty Harish Kumar Discipline Electronics & Communication Engg. Semester 6th

LESSON PLAN

Faculty Harish Kumar

Discipline Electronics & Communication Engg.

Semester 6th

Subject Wirless & Mobile Communication

Lesson Plan Duration

15 WEEKS(From January 2018 to April 2018)

Work Load (Lecture) / Practical per week (in hours)

Theory - 04, Practical - 03

Week Theory Practical

Lect. Day Topic Practical Day Topic

1st

1st Basics of Wireless Communication

1st (3 Hours)

Introduction to wireless & Mobile

communication and systems

2nd Advantages of wireless communication

3rd Electromegnetic waves

4th Frequency Spectrum used

2nd

1st Paging system

2nd (3 Hours)

Study the features, specification and

working of cellular mobile

2nd Cordless Telephone System

3rd Cellular Telephone System

4th Communication between base station & mobile in a cellular telephone system

3rd

1st Definitions related with wirless communication

3rd (3 Hours)

Signal strength measurement of

various points from a transmitting

antenna/cordless phone

2nd Comparison of Pager, Cordless telephone and Cellular telephone systems

3rd Revision, Assignment of Unit - 1

4th First Generation cellular telephone system

4th

1st Second Generation cellular telephone system

4th (3 Hours)

Revision and internal viva

2nd Third Generation cellular telephone system

3rd Fourth Generation cellular telephone system

4th Revision, Assginment of Unit - 2

5th

1st Test of Unit - 1 & 2

5th (3 Hours)

Visit of a Mobile Switching Centre

(MSC) in the nearest M.S. Facility

provider

2nd Cellular Concept & Cell Area

3rd Fundamental Concepts of Cellular Telephone

4th Cellular Capacity and frequency reuse concept

6th

1st Frequency reuse factor

6th (3 Hours)

Demonstration of Base Trans Receiver (BTS) with nearby

cellular tower

2nd Interference,Co-Channel Interference

3rd Adjacent-Channel Interference

4th Power Control for Reducing Interference

7th

1st Improving Coverage and Capacity in Cellular System

7th (3 Hours)

Observing call processing of GSM

trainer Kit

2nd Revision, Assignment of Unit - 3

3rd Multiple Access Techniques for Wireless Communication

4th Introduction to Multiple Accesses

8th

1st Frequency Division Multiple Access (FDMA)

8th (3 Hours)

Revision and internal viva

2nd Features of FDMA

3rd Tme Division Multiple Access (TDMA)

4th Features of TDMA

9th

1st Efficiency of TDMA, No. of Channel in TDMA System

9th (3 Hours)

Observing call processing of CDMA

trainer Kit

2nd Code division multiple access (CDMA)

3rd Features of CDMA

4th Space Division multiple access (SDMA)

10th

1st Spread Spectrum Multiple Access (SSMA)

10th (3 Hours)

Revision

2nd Frequency Hopping Spread Spectrum (FHSS)

3rd Comparison of FDMA/TDMA/CDMA

4th Revision, Assignment of Unit- 4

11th

1st Test of Unit - 3 & 4

11th (3 Hours)

Pairing of two devices using

Bluetooth

2nd Introduction to Mobile communication systems

3rd Introduction of Global system for mobile communication (GSM)

4th GSM Features

5th GSM Services

12th

1st GSM System Architecture

12th (3 Hours)

Revision

2nd Introduction of CDMA System

3rd Spread Spectrum Multiple Access

4th Comparison between CDMA and GSM Systems

13th

1st Introduction to GPRS

13th (3 Hours)

Data transfer using Wi-Fi

2nd Introduction to GPS

3rd GPS Services

4th Introduction to Bluetooth

14th

1st Introduction to Wi-Fi

14th (3 Hours)

Revision and internai viva

2nd Revision, Assignment of unit - 5

3rd Introduction to Digital and Data Communication

4th Block Diagram of Digital & Data Communication System

15th

1st Advantages of Digital communication

15th (3 Hours)

Value aided experiments

2nd Comparison of Digital Data Communication system with Analog communication system

3rd Revision, Assignment of Unit - 6

4th Test of Unit - 5 & 6

Government Polytechnic for Women Sirsa

Name of Faculty: Sh. Raj kumar

Discipline: Electronics and Communication Engineering

Semester: 6

Subject: ENTREPRENEURSHIP DEVELOPMENT AND MANAGEMENT

Lesson Plan Duration: 45 DAYS

WEEK THEORY Topic

1st week

Day 1 ENTREPRENEURSHIP Concept /Meaning and its need

day 2 Qualities and functions of entrepreneur and barriers in entrepreneurship

day 3 Sole proprietorship and partnership forms of business organizations

2nd week

day 4 Schemes of assistance by entrepreneurial support agencies at National, State

day 5 Schemes of assistance by entrepreneurial support agencies at DISTRICT level

day 6 organisation: NSIC, NRDC, DC, MSME, SIDBI, NABARD

3rd week

day 7 Commercial Banks, SFC’s TCO, KVIB, DIC, Technology Business Incubators (TBI) and Science and Technology Entrepreneur Parks

day 8 Scanning of the business environmentMarket Survey and Opportunity Identification

day 9 Salient features of National and State industrial policies and resultant Types and conduct

of market surveybusiness opportunities

4th week

day 10 Assessment of demand and supply in potential areas of growth

day 11 Identifying business opportunity

day 12 Considerations in product selection

5th week

day 13 Preliminary project report Project report Preparation

day 14 Detailed project report including technical, economic and market feasibility

day 15 Common errors in project report preparations

6th week

day 16 Exercises on preparation of project report

day 17 Introduction to Management and its need

day 18 Definitions and importance of management

7th week

day 19 Functions of management: Importance and process of planning, organising, staffing, directing and controlling

day 20 Principles of management (Henri Fayol, F.W. Taylor)

day 21 Concept and structure of an organization

8th week

day 22 Types of industrial organisations a) Line organization

day 23 b) Line and staff organisation c) Functional Organisation

day 24 Leadership Definition and Need Qualities and functions of a leader

day 25 Types of leadership Manager Vs leader

9th week

day 26 Motivation Definitions and characteristics

day 27 Factors affecting motivation Theories of motivation (Maslow, Herzberg, Douglas, McGregor)

10th day 28 Management Scope in Different Areas Human Resource Management

week day 29 Introduction to Man power planning, recruitment and selection Introduction and objective

day 30 Doubt will be taken

11th week

day 31 Introduction to performance appraisal methods

day 32 Introduction functions Material and Store Management

day 33 ABC Analysis and EOQ objectives

12th week

day 34 Introduction, importance Marketing and sales

day 35 Physical distribution and its functions

day 36 Introduction to promotion mix Sales promotion

13th week

day 37 Introductions, importance and its functions Financial Management

day 38 Elementary knowledge of income tax, sales tax, excise duty, custom duty and VAT

day 39 Miscellaneous Topics Customer Relation Management (CRM)

14th week

day 40 Definition and need ,Types of CRM

day 41 Statistical process control Total Quality Management (TQM)

day 42 Just in time (JIT) Total employees Involvement

15th week

day 43 Intellectual Property Right (IPR)

day 44 Introductions, definition and its importance

day45 Infringement related to patents, copy right, trade mark

Name of The Faculty:

Sh.Vikramaditya

Discipline : ECE Semester : 4th Subject : Maintenance of computer system

Lesson plan

duration:

15 weeks (from january,2018 to april,2018)

Week

Theory Practical

Lecture day Topic including assignment test

Practical day Topic

1st

1st Introduction to different type

of motherboard

1st Operation,maintenance,install

ation and testing of monitor 2nd Single Board based system

3rd Block diagram of motherboard

4th installation of computer

system

2nd

5th Assignment: Motherboard

2nd Operation,maintenance,install

ation and testing of HDD patitioning and formating

6th Test

7th Different Types of buses

8th PCI

3rd

9th SCSI

3rd Operation,maintenance,install

ation and testing of DOT matrix printer

10th Serial and Parrallel Ports (COM

ports)

11th Ports COM1,LPT1

12th USB

4th

13th RS 232 C

4th Operation,maintenance,install

ation and testing of laser printer

14th use of computer for

instrumentation

15th Assignment:Buses and Ports

16th Test

5th

17th Principle and contruction of HDD

5th Revision 18th Floppy Disk Controller

19th Hard disk controller

20th Pen Drives

6th

21st common faults of HDD

6th motherboard based on latest

microprocessor and chipsetCMOs set up

22nd common faults of FDD

23rd RAM module

24th Assignment:HDD,FDD

7th

25th Test

7th DVD-ROM/DVD writer

26th Block diagram of keyboard

controller

27th Keyboard switches

28th Keyboard faults

8th

29th Mouse

8th connectors and cables 30th common faults of mouse

31st optical mouse

32nd scanner, digitizer

9th

33rd computer monitor block

diagram

9th Revision 34th

difference between TV and Computer Monitor

35th video display

adaptor(monochrome)

36th video display adaptor(colour)

10th

37th introduction to solid state

displays

10th MODEM/ROUTER/SWITCHES 38th

Assignment:CRT display Devices

39th Test

40th Printing mechanism

11th

41st Dot matrix printer

11th Installation of any operating

system 42nd inkjet printer

43rd laser printer

44th printer controller

12th

45th centronics interface

12th establish LAN/WLAN using

networkin devices 46th

signals from PC to printer and printer to PC

47th Assignment:Printer

48th Test

13th

49th introduction to networking

devices

13th Revision 50th LAN

51st WAN

52nd wi-fi,WLAN

14th

53rd Router

14th Study of Laptop,IPAD and

smart phone

54th switches

55th HUB

56th Modems

15th

57th need and functions of Modems

15th Revision 58th

Laptops their need and applications

59th Assignment:Modem

60th Test

LESSON PLAN

Name of Faculty : KRISHAN KUMAR

Discipline :ELECTRONICS & COMMUNICATION ENGG

Semester : 6th

Subject : MEDICAL ELECTRONICS

Work Load : Lecturer - 04, Practical - 06

Week Lecture Day

Practicals Week Practical Day Practicals

Topic Topic

1 1 INTRODUCTION TO SUBJECT IMPORTANCE / NEED, SYLLABUS CONATENTS REFERENCE BOOKS

1 1ST INTRODUCTION ABOUT SYLLABUS SUBJECT INTRODUCTION ABOUT SYLLABUS SUBJECT

2 UNIT-1: Anatomy and physiology · Elementary ideas of cell structure, VARIOUS ORGAN SYSTEMS

3 Heart and circulatory system.

4 Central nervous system

2 5 Muscle action · Respiratory system

2 2ND INTRODUCTION BRIEFING ABOUT THE COMPONENTS, KIT, APPARATUS THAT WILL BE USED IN THE SUBJECT

6 Body temperature and reproduction system

7 OVERVIEW OF UNIT-1, DISCUSSION OF IMPORTANT QUESTIONS REGARDING EXAMS POINT OF VIEW REVISION

8 Overview of Medical Electronics Equipments- CONTENTS OF UNIT, BIO-MEDICAL INSTRUMENTATIONS SYSTEM GROUP-TYPE OF MEDICAL MEASUREMENTS, PERFORMANCE REQUIREMENT OF MEDICAL EQUIPMENT, CLASSIFICATION OF MEDICAL EQUIPMENTS

3 9 diagnostic Equipments , X-RAYS 3 3RD TO OPERATE & FAMILIRISATION OF B.P. APPARATUS

10 ULTRASONOGRAPHY

11 COMPLETE TOMOGRAPHY

12 MAGNETIC RESONANCE IMAGING (PRINCIPLES, MACHINES, COMPONENTS, APPLICATIONS, ADVANTAGES & DISADVANTAGES OF THE ABOVE

4 13 clinical laboratory equipment- TYPES, CALORIMETER, SECTROPHOTOMATRY

4 4TH TO OPERATE & FAMILISATION OF ECG MACHINE 14 FLAME PHOTOMETER, KYMOGRAPH,

ELECTROPHORESIS

15 THEREPEUTIC EQUIPMENTS - TYPES HEAMODIALYSIS, ANAESTHESA MACHINES, OPERATION

16 VENTILATOR, HEART LUNG MACHINE, HEARING AIDS, NEBULIZER- OPERATION APPLICATION

5 17 UNIT-3: ELECTRODES-CONTENTS OF UNIT, BIO-ELECTRIC SIGNALS-SOURCES, TYPES ORIGIN

5 5TH TO MEASURE THE CONCENTRATION OF BLOOD SUGAR WITH 18 BIO ELECTRODES, PROPERTIES OF BIO-

ELECTRODES, ELECTRODES GLUCOMETER (FASTING, P.P RANDOM)

19 ELECTRODE-TISSUE INTERFACE-METAL ELECTROSYTE INTERFACE, ELECTROLYTE SKIN INTERFACE, ELECTRODE MODEL CKT

20 CONTACT IMPEDANCE, TYPES OF ELECTRODES-ELECTRODES ON THE BASIS OF ELECTEODE ACTION, PLACE OF USE , APPLICATION

6 21 ELECTRODES USED FOR ECG, EEG, EMG, EEG ELECTRODES, EEG ELCTRODES-TYPES, BRIEF DESCRIPTION

6 6TH TO MEASURE THE RESPIRATION RATE

22 OVERVIEW, DISCUSSION OF IMPORTANT QUESTION REGARDING EXAMS POINT OF VIEW REVISION

23 ASSIGNMENT-1, DISCUSSION & DOUBT CLEARANCE OF UNIT-1,2,3

24 UNIT-4: PHYSICAL LOGICAL TRANSDUCERS: INTRODUCTION, CONTENTS OF TRANSDUCERS USE OF TRANSDUCERS FOR DIFFERENT SIGNAL PARAMETERS

7 25 PERFORMANCE CHARACTERSTICS OF TRANSDUCERS-STATIC, DNAMIC, OTHER CHARACTERISTICS, TRANSDUCER SELECTION CRITERIA

7 7TH TO MEASURE THE PULSE RATE

26 PHYSICLOGICAL SENSORS / TRANSDUCERS- IDEA, TYPES, PRESSURE TRANSDUCER STRAIN GUAGE, LVDT

27 PRESSURE TRANSDUCER- CAPACITIVE PRESSURE PIEZOELECTRIC PRESSURE TRANSDUCERS. FLOW TRANSDUCERS-IDEA

28 TYPE OF FLOW TRANSUDERS. EXPLANATION

8 29 TEMPERATURE TRANSUDERS- TYPES EXPLANATION

8 8TH INSTALLATION OF SMALL MEDICAL EQUIPMENT IN LABS OF HOSPITAL PRECAUSTIONS TO BE TAKEN

30 PULSE SENSORS-TYPES, EXPLANATION

31 RESPIRATION SENSORS-TYPES EXPLANATION REVISION & DISCUSSION OF UNIT-4

32 ASSIGNMENT -2, ORAL TEST OF UNIT-4

9 33 UNIT-5: BIO MEDICAL RECORDERS INTRODUCTION, CONTENTS OF UNIT, ECG, BASICS, WAVEFORM, INTERPRETATION OF HUMAN ECG, ELECTRODES & LAB FOR ECG

9 9TH STUDY OF LARGE MEDICAL EQUIPMENT IN HOSPITAL NURSING HOME

34 PROCESS/METHODS OF RECORDING ECG, ECG MACHINE / RECORDER-DESCRIPTION, TYPES OF ECG RECORDER, FACTORS THAT AFFECT NORMAL ECG, APPLICATIONS OF ECG, MERITS & DEMERITS

35 EEG-BASIC CONCEPT, BIOELECTRIC SIGNALS FROM BRAIN, ELECTRODE PLACEMENT, EEG RECORDING MODES, METHOD/PROCESS OF EEG RECORDING , EEG MACHINE, APPLICATION , MERITS & DEMERITS

36 ELECTROMYOGRAPHY-EMG M/C TYPES OF EMG, APPLICATION, ADVANTAGES

10 37 REVISION OF UNIT-5, DISCUSSION OF IMPORTANT QUESTIONS REGARDING EXAM POINT OF VIEW

10 10TH OPERATION & USE OF ELECTRO PHYSIOTHERAPY

38 DOUBT CLEARENCE, DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS WANT TO REPEAT

39 UNIT-6: PATIENT MONITORING SYSTEMS INTRODUCTION, CONTENTS OF UNIT, NEED/IMPORTANCE

40 HEART RATE MEASUREMENT - DIFF. METHODS

11 41 PULSE RATE MEASUREMENT - DIFFERENT TYPES & METHODS

11 11TH MAINTENANCE SCHEDULE FOR DIFFERENT EQUIPMENT & THEIR RECORDS IN HOSPITAL

42 RESPIRATION RATE MEASUREMTN- DIFFERENT METHODS

43 BLOOD PRESSURE MEASUREMENT- DIRECT METHODS, INDIRECT ( NON-INVASIVE)

44 ADVANTAGES, DISADVANTAGES OF METHODS OVER EACH OTHER COMPARISON

12 45 PACEMAKEER-NEED, EXPLANATION , COMPARISON BETWEEN EXTERNAL & INTERLA PACEMAKER; APPLICATIONS

12 12TH REPEAT OF EXPERIMENTS OF 1,2,3 (FOR ABSENTEE STUDENTS EARLIER)

46 DEFIBRILLATOR- IMPORTANCE, TYPES OF ELECTRODES USED IN IT, CLASSIFICATION OF DEFIBRILLATORS

47 USE OF MICROPROCESSOR IN PATIENT MONITORING, REVISION OF TOPICS STUDIED IN UNIT-6

48 DISCUSSION OF IMPORTANT QUESTIONS FROM EXAM POINT OF VIEWS, ASSIGNMENT-3

13

49

UNIT-7: SAFETY ASPECTS OF MEDICAL INSTRUMENTS-NEED, IMPORTANCE EFFECTS OF ELECTRICAL CURRENT ON THE HUMAN BODY- PHYSIOLOGICAL, PSYCHOLIGICAL

13 13TH REPEAT OF EXPERIMENTS OF 4,5,6 (FOR ABSENTEE EARLIER)

50 SAFETY ASPECTS OF CURRENT- GROSS SHOCK, MICRO CURRENT SHOCK

51 LEAKAGE CURRENTS- TYPES, PRECAUTIONS TO MINIMISE ELECTRIC SHOCK HAZARDS.

52 METHODS OF ACCIDENT PREVENTION, TESTING OF BIOMEDICAL EQUIPMENTS

14 53 SPECIAL DESIGNS FROM SAFETY CONSIDERATION, SEFETY STANDARDS

14 14TH REPEAT OF EXPERIMENTS -7 (FOR ABSENTEE EARLIER) 54 REVISION OF TOPICS STUDIED IN UNIT-7

55 ASSIGNMENT-4, DISCUSSION OF IMPORTANT QUESTIONS REGARDING EXAMS POINT OF VIEW

56 DOUBT CLEARANCE, DISCUSSION OF TOPICS THAT STUDENTS WANT TO DISCUSS

15 57

REVISION OF UNITS-6,7 ; DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS OF TOPICS THAT STUDENTS WANT TO REPEAT

15 15TH REPEAT OF EXPERIMENTS OF EARLIER ABSENTEE

58 REVISION OF UNIT-4,5; DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS OF TOPICS THAT STUDENTS WANT TO REPEAT

STUDENTS

59 REVISION OF UNIT-1,2,3; DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS OF TOPICS THAT STUDENTS WANT TO REPEAT

60 PAPER ATTEMPTION TIPS, IMPORTANT QUESTION REGARDING EXAMS POINT OF VIEW

Lesson Plan (ES II)

Name of the Faculty: Krishan Kumar

Discipline: Electronics and Communication Engg.

Semester: 6th

Subject : ES-II

Lesson Plan Duration: (From Jan, 2018 to April, 2018)

Work Load (Lecture/Practical) per week (In hour): Practical-02

Week

Theory Practical

Lecture Day Topic(including assignment/Test) Practical Day

Topic

1st 1st Moke Interview: Discussion of general questions asked in the interviews.

2nd 2nd Moke Interview: Discussion on the proper answers.

3rd 3rd Moke Interview.

4th 4th Preparing for meeting: Writing the agenda of the meeting, list of key persons, orders of the meeting.

5th 5th Preparing for meeting: Views of all the members; a discussion.

6th 6th Preparing for meeting: Minutes of the meeting.

7th

7th

Group discussion ( Assignment of topics)

8th 8th Group Discussion

9th 9th Group Discussion

10th 10th Seminar ( Division of topics)

11th 11th Seminar

12th 12th Seminar

13th 13th Making a presentation

(Elements of good presentation)

14th 14th Making a presentation

(Structure and tools of presentation)

15th 15th Making a presentation (Paper

reading)

16th 16th Making a presentation(Power point presentation)