Lesson 4 Creating a Simple Sketch Solidworks Free Workbook.

Lesson 4 Creating a Simple Sketch

Solidworks Free Workbook

Objectives

Solidworks Free Workbook

- Terms to Know. - Review previous lessons.- Start Solidworks.- New Solidworks part (*.SLDPRT).- Main Sketch Command Manager tools.- Select a sketch plane.- Change the Units from mm (MMGS) to inches (IPS).- Display and modify the Grid/Snap settings.- Use the Line tool found in the Sketch Command Manager Tab.- Create simple sketch geometry.- Delete sketch entities.- Apply basic Smart Dimensions- Modify existing Smart Dimensions.- Use a few of the Geometrical Relations tools- Modify existing lines using the Trim tool- Exit the 2D Sketch Environment. - Edit/modify an existing Sketch.- Save the newly created file.- Exit Solidworks.

Terms to Know

Solidworks Free Workbook

-2D Sketch Environment -dimensions-Smart Dimensions -constraints-Command Manager -Geometric Relations-Dimensional Relations -Profile-Over Defined -Fully Defined-Entity -Document/file-Coincident 

Sketch Command Manager Tools

Solidworks Free Workbook

Tip: Steps to Accessing Additional Sketch Tools 

1.) Move the cursor over the small arrow. The arrow that is to the right of the tool icon, in this case the Exit Sketch tool.

 2.) Select the arrow. This will bring up a small window that will display the additional related

sketch tools.  

3.) Move the cursor over the desired new tool and select it. This will activate the optional tool.  

Tip: Steps to Accessing Additional Sketch Tools 

1.) Move the cursor over the small arrow. The arrow that is to the right of the tool icon, in this case the Exit Sketch tool.

 2.) Select the arrow. This will bring up a small window that will display the additional related

sketch tools.  

3.) Move the cursor over the desired new tool and select it. This will activate the optional tool.  

Sketch Command Manager Tools

Solidworks Free Workbook

Sketch This tool is used to create a new sketch or edit an existing sketch. The optional tool is Exit Sketch shown below.

Exit Sketch 

This tool is one method that is used to exit and save the current sketch. Applying this tool will exit the Sketch Environment back to the Part Environment.

 Smart Dimension 

Smart Dimensions also referred to as Dimensional Constraints (numerical values such as length, distance and angle, radius and diameter). The optional tools (not shown) are Horizontal, Vertical and Ordinate dimensions.

Line This tool is used to create all lines (single and/or multiple lines). The optional tool is Center Line and shown below.

Trim Entities

This tool is used to trim sketch entities.

Display/ Delete Relations

This tool is used to display the sketch relations (Geometrical Constraints).

Fully Define Sketch

This tool is used to automatically create all the relations required to fully define (constrain) a sketch.

Creating a Simple Sketches

Solidworks Free Workbook

Step 1: Start Solidworks

Step 2: Start a New Part File

Step 3: Select the Part Option:

Creating a Simple Sketches

Solidworks Free Workbook

Creating a Simple Sketches

Solidworks Free Workbook

Step 4: Modify the Sketch Default Settings

Creating a Simple Sketches

Solidworks Free Workbook

Step 4: continued

Creating a Simple Sketches

Solidworks Free Workbook

Step 5: Selecting a Sketch Plane

Creating a Simple Sketches

Solidworks Free Workbook

Step 5: continued (Sketch screen)

Creating a Simple Sketches

Solidworks Free Workbook

Step 6: Creating Lines

Creating a Simple Sketches

Solidworks Free Workbook

Step 6: Continued

Creating a Simple Sketches

Solidworks Free Workbook

Step 6: Continued

Creating a Simple Sketches

Solidworks Free Workbook

Step 6: Continued (Exact Input and ending the command)

Creating a Simple Sketches

Solidworks Free Workbook

Step 6: Continued (restarting the Line command)

Creating a Simple Sketches

Solidworks Free Workbook

Step 7: Trim

Creating a Simple Sketches

Solidworks Free Workbook

Step 8 : Fully Defining the Sketch

Creating a Simple Sketches

Solidworks Free Workbook

Step 9: Modifying the Dimensional Values

Creating a Simple Sketches

Solidworks Free Workbook

Step 10: Creating a Angular Dimension

Creating a Simple Sketches

Solidworks Free Workbook

Step 11: Creating a Smart Dimension

Step 12: Moving the Dimensions

Creating a Simple Sketches

Solidworks Free Workbook

Step 13: Exit the Sketch Environment

Creating a Simple Sketches

Solidworks Free Workbook

Step 14: Modifying Sketch1

Creating a Simple Sketches

Solidworks Free Workbook

Step 15: Saving the Sketch before it gets away!

Solidworks Free Workbook

Exercises

Solidworks Free Workbook

Exercises