LES JARDINS Quilt - Michael Miller Fabrics...Les Jardins – White Backing 4 ¾ yards • Cut two 83” x WOF strips. Piece the strips together and trim to make the 83” x 83” pieced

LES JARDINS Quilt SIZE 75”W X 75”H | LEVEL INTERMEDIATE | DESIGNED BY HEIDI PRIDEMORE

FREE PATTERN AVAILABLE ON MICHAELMILLERFABRICS.COM

FABRIC REQUIREMENTS

p.212.704.0774 | [email protected] | www.michaelmillerfabrics.com

FABRIC REQUIREMENTSSKU YARDAGE PER ONE QUILT # OF BOLTS FOR 12 KITS # OF BOLTS FOR 24 KITS(A) DPC8047-WHITE 1/2 YARD 1 BOLT (6 YARDS) 1 BOLT (12 YARDS)(B) SC5333-BUBBLEGUM 2/3 YARD 1 BOLT (8 YARDS) 2 BOLTS (16 YARDS)(C) DPC8047-BLACK 1-1/4 YARDS 1 BOLT (15 YARDS) 2 BOLTS (30 YARDS)(D) DPC8048-BLACK* 1-5/8 YARDS 2 BOLTS (19-1/2 YARDS) 3 BOLTS (39 YARDS)(E) SC5333-BRIGHT WHITE 2-1/2 YARDS 2 BOLTS (30 YARDS) 4 BOLTS (60 YARDS)(F) DPC8048-WHITE 1/3 YARD 1 BOLT (4 YARDS) 1 BOLT (8 YARDS)(G) SC5333-LUNA 2/3 YARD 1 BOLT (8 YARDS) 2 BOLTS (16 YARDS)(H) DPC8046-WHITE 3 YARDS 3 BOLTS (36 YARDS) 5 BOLTS (72 YARDS)(BACKING) DPC8047-WHITE 4-3/4 YARDS 4 BOLTS (57 YARDS) 8 BOLTS (115 YARDS) TOTAL BOLTS NEEDED 16 BOLTS (12 W/O BACK) 28 BOLTS (20 W/O BACK)*INCLUDES BINDING

WE DO OUR BEST TO MAKE SURE THESE ARE ACCURATE YARDAGESBUT THESE ARE ESTIMATES UNTIL THE FINAL PATTERN IS COMPLETED AND EDITED. THANK YOU.

DPC8046 WHITELES JARDINS BORDER

3 YARDS

DPC8047 BLACKLES JARDINS1-1/4 YARDS

DPC8048 BLACK*VINE STRIPE

1-5/8 YARDS (INCLUDES BINDING)

DPC8048 WHITEVINE STRIPE

1/3 YARD

DPC8047 WHITELES JARDINS

1/2 YARD

DPC8047 WHITELES JARDINS

(BACKING) 4-3/4 YARDS

SC5333 BUBBLEGUMCOTTON COUTURE

2/3 YARD

SC5333 BRIGHT WHITECOTTON COUTURE

2-1/2 YARDS

SC5333 LUNACOTTON COUTURE

2/3 YARD

3

PC8047-WhiteLes Jardins – White

SC5333-Bubble GumCotton Couture – Bubblegum

PC8048-BlackVine Stripe – Black

PC8048-WhiteVine Stripe – White

SC5333-LunaCotton Couture – Luna

PC8046-WhiteLes Jardins Border – White

SC5333-Soft WhiteCotton Couture – Soft White

PC8047-BlackLes Jardins – Black

(A)

(B)

(D)

(F)

(G)

(H)

(E)

(C)

Materials

Fabric Yardage Cutting

"Les Jardins"Quilt by Heidi Pridemore

Size: Approximately 75" x 75" Skill Level: Advanced Beginner

½ yard

⅔ yard

1 ⅝ yards

⅓ yard

⅔ yard

3 yards

2 ½ yards

1 ¼ yards

• Cut one 5 ½” square.• Cut two 3 ½” x WOF strips. Sub-cut twenty 3 ½” squares.

• Cut one 3” x WOF strip. Sub-cut eight 3” squares.• Cut eight 2” x WOF strips. Sub-cut (160) 2” squares.

• Cut one 5 ½” x WOF strip. Sub-cut four 5 ½” squares.• Cut seven 3 ½” x WOF strips. Sub-cut eighty 3 ½” squares.• Cut eight 2 ½” x WOF strips for the binding.

• Cut two 2” x 22 ½” WOF strips.• Cut one 2” x WOF strip. Sub-cut two 2” x 19 ½” strips.

• Cut four 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut two 2” x 75 ½” strips.• Cut four 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut two 2” x 72 ½” strips.• Cut two 1 ½” x 24 ½” WOF strips.• Cut two 1 ½” x 22 ½” WOF strips.

• Fussy cut four 12 ½” x 52” Length of Fabric (LOF) strips.

• Cut two 3” x WOF strips. Sub-cut sixteen 3” squares.• Cut one 2 ½” x WOF strip. Sub-cut four 2 ½” x 5 ½” strips.• Cut one 2 ½” x WOF strip. Sub-cut four 2 ½” x 7 ½” strips.• Cut sixteen 2” x WOF strips. Sub-cut (320) 2” squares.• Cut seven 2” x WOF strips. Sub-cut eighty 2” x 3 ½” strips.• Cut ten 2” x WOF strips. Sub-cut eighty 2” x 5” strips.

• Cut one 5 ½” x WOF strip. Sub-cut four 5 ½” x 7 ½” strips.• Cut ten 3 ½” x WOF strips. Sub-cut eighty 3 ½” x 5” strips.

Cutting instructions Please Note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

PC8047-WhiteLes Jardins – White

Backing 4 ¾ yards • Cut two 83” x WOF strips. Piece the strips together and trim to make the 83” x 83” pieced backing.

You will also need:• 83” x 83” batting, fusible web, threads to match, scissors, straight pins, acrylic ruler, rotary cutter and mat.

4

Disclaimers This pattern is provided as a courtesy to quilt stores, catalogs and quilters. Michael Miller Fabrics, LLC is not responsible for the accuracy of any kits packaged to accompany this pattern. Please direct any inquiries to the kit maker.

Yardage requirements for this pattern may allow for excess yardage to accommodate specific placement of motifs or to allow for any fussy-cutting to achieve the finished quilt design.

While every attempt has been made to give accurate measurements, yardage requirements and construction directions; this does not allow personal variations in measuring, cutting or sewing. The enclosed directions were used in the construction of the original quilt.

Fig. 2Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7

Unit 1make 4

C

E E

B B

Unit 2make 4

DE

E

Unit 3make 4

EE

Unit2

Unit 4make 1

Unit3

Unit3

Unit3

Unit3

Unit1

Unit1

Unit1

Unit1

A

Block Assembly1. Place one 3” Fabric E square on the top left corner of one 5 ½” x 7 ½” Fabric C rectangle, right sides together (Fig. 1). Sew across the diagonal of the small square from the upper right corner to the lower left corner (Fig. 1). Flip open the triangle formed and press (Fig. 2). Trim away the excess fabric from behind the triangle ¼” away from the sewn seam.

2. Follow Figure 3 for seam direction to add a 3” Fabric E square to the upper right corner and a 3” Fabric B square to both the lower left and right corners of the 5 ½” x 7 ½” Fabric C rectangle to make one Unit 1 block (Fig. 4).

3. Repeat Steps 1-2 to make (4) Unit 1 blocks total.

4. Place one 3” Fabric E square on the bottom left corner of one 5 ½” Fabric D square, right sides together. Sew across the diagonal of the smaller square from the upper left corner to the lower right corner. Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam.

5. Follow Figure 5 for the seam direction to add a 3” Fabric E square to the upper right corner of the 5 ½” Fabric D square to make one Unit 2 block (Fig. 5).

6. Repeat Steps 4-5 to make (4) Unit 2 blocks total.

7. Sew one 2 ½” x 5 ½” Fabric E strip to the top of one Unit 2 block. Sew one 2 ½” x 7 ½” Fabric E strip to the left side of the Unit 2 block to make one Unit 3 block (Fig. 6). Repeat to make (4) Unit 3 blocks total.

8. Sew one Unit 3 block to each side of one Unit 1 block, paying attention to the orientation of the blocks, to make the top block row. Repeat to make the bottom block row. Sew one Unit 1 block to each side of one 5 ½” Fabric A square to make the middle block row. Sew the three rows together to make one Unit 4 block (Fig. 7).

5

Fig. 8

Fig. 9 Fig. 10 Fig. 11

Fig. 12

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)14. Sew one 1 ½” x 22 ½” Fabric G strip to each side of the Center Block. Sew one 1 ½” x 24 ½” Fabric G strip to the top and to the bottom of the Center Block.

15. Center one 12 ½” x 52” Fabric H strip on one side of the Center Block and pin in place. Start sewing the strip a ¼” from the top edge of the block and stop a ¼” from the bottom edge. DO NOT TRIM THE EXCESS. Repeat with the opposite side.

F

F

F F

Center Block

Unit4

Unit 5make 80

C

E E

B B

9. Sew one 2” x 19 ½” Fabric F strip to each side of the Unit 4 block. Sew one 2” x 22 ½” Fabric F strip to the top and to the bottom of the Unit 4 block to make the Center Block (Fig. 8).

Unit 6make 80

DE

E

Unit 7make 80

EE

Unit6

Block OneMake 20

Unit7

Unit7

Unit7

Unit7

Unit5

Unit5

Unit5

Unit5

A

10. Repeat Steps 1-2 using eighty 3 ½” x 5” Fabric C rectangles, (160) 2” Fabric E squares and (160) 2” Fabric B squares to make eighty Unit 5 blocks (Fig. 9).

11. Repeat Steps 4-5 using eighty 3 ½” Fabric D squares and (160) 2” Fabric E squares to make eighty Unit 6 blocks (Fig. 10).

12. Sew one 2” x 3 ½” Fabric E strip to the top of one Unit 6 block. Sew one 2” x 5” Fabric E strip to the left side of the Unit 6 block to make one Unit 7 block (Fig. 11). Repeat to make eighty Unit 7 blocks total.

13. Sew one Unit 7 block to each side of one Unit 5 block, paying attention to the orientation of the blocks, to make the top block row. Repeat to make the bottom block row. Sew one Unit 5 block to each side of one 3 ½” Fabric A square to make the middle block row. Sew the three rows together to make one Block One square (Fig. 12). Repeat to make twenty Block One squares total.

6

Fig. 13

Quilt To

p

Folded on

the D

iagonal

18. Sew four Block One squares together. Repeat to make a second strip. Sew one strip to each side of the Center Block.

19. Sew six Block One squares together. Repeat to make a second strip. Sew one strip to the top and to the bottom of the Center Block.

20. Sew one 2” x 72 ½” Fabric G strip to each side of the Center Block. Sew one 2” x 75 ½” Fabric G strip to the top and to the bottom of the Center Block to make the quilt top.

21. Layer and quilt as desired.

22. Sew the eight 2 ½” x WOF Fabric D strips together, end-to-end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press

23. Bind as desired.

16. Repeat Step 15 to sew one 12 ½” x 52” Fabric H strip to the top and to the bottom of the Center Block, making sure to stop and start ¼” away from each end of the block. To miter each corner, fold the Center Block on a diagonal, wrong side together. This should line up the strips from adjacent sides (Fig. 13).

17. Starting at the sewn seam (represented by the arrow in Figure 13), draw a 45-degree line to the edge of the fabric. Sew on the drawn line. Trim the excess fabric leaving a ¼” seam. Repeat this step with the remaining corners.

©2018 Michael Miller Fabrics LLC7

Quilt Layout

H

H

H H

G

G G

G

G

G

G G