Leica EM TIC 3X - Rotary Stage ROTARY STAGE The rotary stage is designed for large area milling (flat milling) in conjunction with the Leica EM TIC 3X. Flat milling is used to remove fine scratches and smearing artefacts in order to pro- vide the best possible surface finish. Before ion beam polishing the sample surface has to be mechani- cally prepared to create a high degree mirror-like surface. FIELDS OF APPLICATION › Metals › Electronic components › Laquer systems › Coating › Minerals › Rocks (oil shale) Leica EM TIC 3X Rotary Stage
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Leica EM TIC 3X - Rotary Stage
ROTARY STAGE
The rotary stage is designed for large area milling (flat milling)
in conjunction with the Leica EM TIC 3X. Flat milling is used to
remove fine scratches and smearing artefacts in order to pro-
vide the best possible surface finish.
Before ion beam polishing the sample surface has to be mechani-
cally prepared to create a high degree mirror-like surface.
FIELDS OF APPLICATION
› Metals
› Electronic components
› Laquer systems
› Coating
› Minerals
› Rocks (oil shale)
Leica EM TIC 3X Rotary Stage
TECHNICAL DETAILS
› Ion-beam-prepared area of up to Ø 25 mm
› Maximum sample size which can be inserted: Ø38 mm
› Lateral movement of the sample < Ø 20 mm: +/- 12.5 mm
› Maximum sample height: 12 mm
This stage is retrofitable to all the Leica EM TIC 3X instruments and comes with PT100 board, a motor board and software
which has to be installed by an authorized service engineer.
Leica EM TIC 3X
Leica EMTIC3X - Rotary Stage ∙ Copyright © by Leica Mikrosysteme GmbH, Vienna, Austria, 2014. Subject to modifications.
LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.
www.leica-microsystems.com
Related Documents
