Company Headquarters: TEMCo – Tower Electric Motor Company 41474 Christy Street Fremont, CA 94538 Inside USA (877) 474-8209 International (510) 490-2187 Fax (510) 490-15 m o c . r e w o p l a i r t s u d n i o c m e t . w w w 7 0 Dimensions, weight, and impedeance may vary slightly from the information provided. For certified drawings, please contact a TEMCo representative. 113627.00 INDUSTRIAL POWER SUPPLY Leeson Single Phase Electric Motor Type: Horsepower: RPM: Rotation: Frame size: Enclosure: Mounting: Connection box: Shaft diameter: Shaft type: Shaft height (from base): Overall length: Overall height: Bearing type: Frame material: Phase: kW: Voltage: Amps (full load): Frequency (Hz): Service factor: Duty cycle: Full load efficiency: Integrated overload protection: Base type: Mounting Hole Pattern Length: Mounting Hole Pattern Width: Agency Approvals: Warranty: Weight (pounds): LxWxH (inches): Table Saw Motor 1.5 3600 Clockwise 182T 56 Foot Side 0.625” Smooth shaft w/ .19 x .19 Key 3.5” 12.31” 8.78” Ball bearings Rolled steel Single 1.119 115/230 7.5 60 Hz 1 Continuous-use rated 72% Yes Rigid 3” 4.88” UL Listed (E49747), CSA Approved (LR2025) 12 months from date of installation or 18 months from date of manufacture 39 12.31 x 8.54 x 8.78
4
Embed
Leeson Single Phase Electric Motor 113627 · t4 t5 t2,t3 t8 p2 c.w. p1 t4 t8 t2,t3 t5 p2 low volt c.c.w. p1 t2,t4 t5 p2,t3 t8---c.w. p1 t2,t4 t8 p2,t3 t5---a 1:1 unless specified
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Company Headquarters: TEMCo – Tower Electric Motor Company 41474 Christy Street Fremont, CA 94538 Inside USA (877) 474-8209 International (510) 490-2187 Fax (510) 490-15 moc.rewoplairtsudniocmet.www 70
Dimensions, weight, and impedeance may vary slightly from the information provided. For certified drawings, please contact a TEMCo representative.
113627.00
INDUSTRIAL POWER SUPPLY
Leeson Single Phase Electric Motor
Type:
Horsepower:
RPM:
Rotation:
Frame size:
Enclosure:
Mounting:
Connection box:
Shaft diameter:
Shaft type:
Shaft height (from base):
Overall length:
Overall height:
Bearing type:Frame material:
Phase:
kW:
Voltage:
Amps (full load):
Frequency (Hz):
Service factor:
Duty cycle:
Full load efficiency:
Integrated overload protection:
Base type:
Mounting Hole Pattern Length:
Mounting Hole Pattern Width:
Agency Approvals:
Warranty:
Weight (pounds):
LxWxH (inches):
Table Saw Motor
1.5
3600
Clockwise
182T
56
Foot
Side
0.625”
Smooth shaft w/ .19 x .19 Key
3.5”
12.31”
8.78”
Ball bearings
Rolled steel
Single
1.119
115/230
7.5
60 Hz
1
Continuous-use rated
72%
Yes
Rigid
3”
4.88”
UL Listed (E49747), CSA Approved (LR2025)
12 months from date of installation or
18 months from date of manufacture
39
12.31 x 8.54 x 8.78
7/2/2007 7:46:42 PM -
7/22/2011 1:42:19 PM
RBC PROPRIETARY AND CONFIDENTIAL INFORMATIONThis document is the property of REGAL BELOIT CORPORATION ("RBC") including
its subsidiaries and divisions and contains proprietary information of RBC. This document
is loaned on the express condition that neither it nor the information contained therein shall
be disclosed to others without the express written consent of RBC, and that the information
shall be used by the recipient only as approved expressly by RBC. This document shall be
returned to RBC upon its request. This document may be subject to certain restrictions