1 JANUARY 2016 - FRAMED SPECIFICATION BOOK
1JANUARY 2016 - FRAMED SPECIFICATION BOOK
2
TABLE OF CONTENTS
Cabinet Specifications
Cabinet Construction
Modification Legend
Warranty
Door Style Options
Cabinet Care Guide
Base Cabinets
Accessible Base
Vanity Base
Desk Base
Wall Cabinets
Tall Cabinets
Accessories
4
6
7
8
9
15
17
22
27
30
31
35
41
2016 TRADITIONAL CATALOG
3
4
TRADITIONAL PRODUCT SPECIFICATIONSSTANDARD CABINET CONSTRUCTION:• Face frames are solid oak or maple, glued and nailed with mortise and tenon joints. Frame stiles and rails are 1½” wide and 3/4” thick.• Sides, tops, bottoms, shelves, hang rails, toe-kicks, fillers, skirts and drawer sides are constructed of 1/2” thick, medium density, industrial particleboard. Exposed surfaces are faced with melamine-coated laminate. Cabinet sides match the color of the cabinet face. Cabinet tops and bottoms match the interior color. • Particleboard conforms to all the following Formaldehyde Emission Requirements: a. ANSI 208.1 Table A b. HUD CFR Part 3280 c. California Air Resources Board (CARB) phase II • Particleboard is certified by the Composite Panel Association as complying to their Environmentally Preferable Product (EPP) specification CPA 3-08: a. California ARB approved third party certifier TPC-1 b. Contains 100% recycled and/or recovered fibers (pre-consumer) c. Complies with CPA EPPS 3-08, ANSI A208.1, HUD 24 CFR Part 3280, and CCR 93120 (CARB Composite Wood ATCM Phase 1)• Decorative toe-kick overlay is 1/8” thick, melamine-faced hardboard• Back panels are 1/8” MDF faced with melamine-coated laminate complies with CARB PH II and certified by PSI-TPC#01
DRAWERS:• Drawers feature a five-sided box. 1/2” thick sides are rabbet-jointed, glued, and nailed to front and back.• Drawer box bottoms are 1/4” particleboard core, faced with melamine-coated laminate, except drawer boxes 15” wide or narrower, which have bottoms of 1/8” MDF faced with melamine- coated laminate.• The powder-coated steel drawer runners screwed to each side, anchor the drawer bottoms in place. Drawers are installed with self-adjusting mounting brackets.• Standard drawer slides are nylon-tired, self-closing, 55-pound rated, side-mounted, powder- coated steel.
DOORS:• Raised panel doors feature solid oak or maple stiles and rails. Raised panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core.• Flat panel doors feature solid oak or maple stiles and rails. Center panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core. • Thermofused melamine doors are 5/8” thick with a true fused, melamine impregnated back.• Thermofoil (3D Laminate) doors are 5/8” thick with a fused, melamine impregnated back and a durable vinyl film formed to the front and edges
5
PLYWOOD UPGRADE CABINET CONSTRUCTION: • Face frames are solid oak or maple, glued and nailed with mortise and tenon joints. Frame stiles and rails are 1-1/2” wide and 3/4” thick.• Sides, tops, bottoms, shelves, hang rails, toe-kicks, fillers, skirts and drawer sides are constructed of 1/2” thick plywood. Exposed surfaces are faced with melamine-coated laminate. Cabinet sides match the color of the cabinet face. Cabinet tops and bottom match the interior color. • Decorative toe-kick overlay is 3.6mm thick, melamine-faced plywood. Back panels are 3.6mm thick plywood, faced with melamine-coated laminate.
DRAWERS:• Drawers feature a five-sided box. Sides are 1/2” thick plywood, faced with melamine coated laminate, rabbet-jointed, glued, and nailed to front and back.• Drawer bottoms are 5.2mm plywood, faced with melamine-coated laminate. Bottoms are inset into dado groove in the drawer sides. The powder-coated steel drawer runner is screwed to each side anchor.• Drawers are installed with self-adjusting mounting brackets. • Standard drawer slides are nylon-tired, self-closing, 55-pound rated, side-mounted powder- coated steel.
DOORS:• Raised panel doors feature solid oak or maple stiles and rails. Raised panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core.• Flat panel doors feature solid oak or maple stiles and rails. Center panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core.• Thermofused melamine doors are 5/8” thick with a true fused, melamine impregnated back.• Thermofoil (3D Laminate) doors are 5/8” thick MDF with a fused, melamine impregnated back and a durable vinyl film formed to the front and edges.
TRADITIONAL PRODUCT SPECIFICATIONS
6
CABINET CONSTRUCTIONBASE CABINET
1/2” stretcher1/2” drawer box with 1/8” bottomparticleboard shownEpoxy coated drawer slide1/2” half-depth adjustable shelfCorner block1/8” back panel1/2” bottom1/2” end panel1/2” toekickFaceframeHinge mounting plateHingeDoorDrawer front
1. 2.
3. 4. 5. 6.7. 8. 9.
10.11.12.13. 14.
WALL CABINET
1/2” stretcher1/2” top1/8” back panel1/2” adjustable shelf1/2” bottom1/2” end panelFaceframeHinge mounting plateHingeDoor
1. 2. 3. 4. 5. 6.7. 8. 9.
10.
7
• 1/2” particleboard, 5 sided box• Applied bottom is secured by staples and reinforced by
epoxy-coated slides• Hardboard bottom is either 1/8” for small drawers or 1/4”
for drawers that are 15” or wider
PARTICLEBOARD - STANDARD
• 1/2” particleboard, 5 sided box• Captured bottom fits into a groove cut into the drawer
sides, front and back• Hardboard bottom is either 1/8” for small drawers or 1/4”
for drawers that are 15” or wider
PARTICLEBOARD FULL EXTENSION
• 1/2” plywood sides and 3/16” plywood bottoms• Captured bottom fits into a groove cut into the drawer
sides, front and back• Choice of standard or full extension slides
PLYWOOD
• 1/2” plywood sides and 3/16” plywood bottoms• Captured bottom fits into a groove cut into the
drawer sides, front and back• Dovetailed corners• Choice of standard or full extension slides
PLYWOOD DOVETAIL
DRAWER BOX OPTIONS
MODIFICATION LEGEND
NCM - No Center Mullion (Option Max is 36”)
NTK - No Toe Kick
8
WARRANTY INFORMATION
Thank you for selecting Leedo Cabintery. Leedo works hard to provide an excellent product at a very competitive price. We guarantee all Leedo products for a period of ONE (1) year from the date of the completion of project installation to be free of defects in materials and manufacturing. During this period we agree to replace, at no cost to the owner, any portion of our work that is found defective.
While Leedo guarantees all structural aspects of our products for a period of one year, the following exclusions do apply:
• Due to the naturally occurring variations in wood, we do not guarantee uniformity of color, tone or grain pattern; nor do we guarantee that stain or finish colors will be free of minor inconsistencies caused by natural variations in pigments and materials.
• Damage caused by normal wear and tear, abuse, neglect, misuse, alterations, water damage, or other environmental conditions such as exposure to extreme temperatures or humidity.
• Work done by others, including refinishing or removal of cabinets.
• Touch-ups, door and drawer adjustments, or cosmetic work.
• Color changes that may occur due to natural aging of the wood or due to exposure to either natural or artificial light.
• Discoloration or dullness in the finish or wood stain that may occur after exposure to ultraviolet light.
Leedo Manufacturing will make the final determination on any warranty-related items. Should a defect in materials or workmanship occur, excluding those noted above, Leedo maintains the right to repair or replace the product at our discretion.
9
ASHTON CHURCHILL CONCORD SHAKER FILLMORE FREEPORTBUCKINGHAM
MIDLAND SHAKER PLANOHARTFORD SHAKER RADISSON ROOSEVELT
Light Cherry ChestnutToffee Pecan
Walnut EspressoJava
MAPLE
10
OAK
BROOKSHIRE FLEMING HUNTINGTON
Western Wheat WalnutToffee Nutmeg Espresso
11
ANDOVER BLANCO BRIDGEPORT CENTENNIAL
MIDTOWN SAVANNAH VANCOUVER WASHINGTON
Centex White (smooth) Snow White GlossWhite Wood Grain White Western Wheat
Cocoa PecanLight Cherry Olivewood Euro Wenge Java
THERMOFOIL
12
Toffee ChestnutPecan Espresso
LONDON
TRUTOUCH
13
LUCINA
Texas Cypress Midnight TeakLight Teak
TEXTURED LAMINATE
14
ASTORIA
White
SMOOTH LAMINATE
15
CABINET CARE GUIDE
A soft cotton cloth dampened with warm water is usually sufficient to clean your cabinets. If more thorough cleaning is required, use on the following cleaning solutions:
Using the mildest cleaning solution will successfully clean your cabinets. Stronger products may damage or discolor your cabinet finish and are not recommended. After cleaning, wipe all surfaces with a clean, damp cloth. Dry immediately, using another soft, clean cloth.
Spills
Clean spills immediately. Prolonged exposure to spills, including food, water or other liquids, or grease spills can cause permanent discoloration or damage to your cabinet’s finish.
Cleaning Product to Avoid
Regular Dusting
Use a clean, soft, lint-free cotton cloth for regular dusting. Packaged dusting sheets are not required or recommended. Do not use pre-moistened dusting sheets or aerosol products specified for dusting.
Waxing and Polishing
Waxing is not required or recommended. Over time, waxing and polishing compounds may build up on the surface of your cabinets and cause a hazy, streaky or yellowed appearance.
• A mixture of dishwashing liquid and warm water.
• A mild all-purpose cleaner. Make sure it does not contain ammonia, silicone, or acid.
• Harsh chemicals including ammonia and bleach.
• Abrasive cleaning products such as tub and sink cleaners scouring powder, scouring
pads, or steel wool.
• Sponges or dish clothes. They may contain particles that could scratch your cabinets,
or they may contain food and oil residue.
• Solvent-based or petroleum-based products such as mineral spirits, nail-polish
removers or paint thinners.
• Silicone-based cleaning, waxing or polishing products.
16
Gables Upper Kirby
Camden Gaines Ranch
Avalon Bloomingdale
17
B Base Single Door and Drawer
Width: 9, 12, 15, 18, 21, 24Depth: 21, 24Shelves: 1 Adj. half depth
Width: 24, 27Depth: 21, 24Shelves: 1 Adj. half depth
B Base Single Drawer and Double Door
CABINET DEPTH: 24 (STD), 21 DRAWER DEPTH:19HEIGHT: NTK HEIGHT:34-1/2 30
DOORS:• 09-24W Single Door• Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments
BASE CABINETS
CODE TEMPLATE:
CODE: BWIDTH: 15 B15-L-21D*DEPTH: 21 *Non std depth
added to code
EXAMPLES:B15-L, B24-L/R, B27, B15-L-21D, B27-21D
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24Shelves: 1 Adj. half depth
B Base Double Drawer and Door
NTK NTK NCM
NTK NCM
TOE KICK HEIGHT: 4-1/2
Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24Shelves: 1 Adj. half depth
BFHD Base Full Height Single Door
• Center mullion
Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24Shelves: 1 Adj. half depth
BFHD Base Full Height Double Door
NCM
D3B Base 3 Drawer
• Top drawer front is 5.5” tall• Two equal size lower drawersWidth: 12, 15, 18, 21, 24, 27, 30, 36Depth: 21, 24
18
D4B Base 4 Drawer
• Top drawer front is 5.5” tall• Three equal size lower drawers
Width: 12, 15, 18, 21 24, 27, 30, 36Depth: 21, 24
BBS Base Bookshelf
• Two equal openings• Color matching interior• Fixed middle rail
Width: 18, 21, 24, 27, 30Depth: 12, 21, 24
• One door• One drawer• One 35 qt. waste container
Width: 15, 18, 21Depth: 24
BTCP Single Trash Can Pullout BDTCP Double Trash Can Pullout
• One door• One drawer• Two 35 qt. waste containers
Width: 18, 21Depth: 24
BFHDTCP
• One door• Two 35 qt. waste containers
Width: 18, 21Depth: 24
BWR Base Wine Rack
• Color matching interior
Width: 18, 21, 24, 27, 30 Depth: 12
Single Trash Can Pullout BFHDDTCP Double Trash Can Pullout
• One full height door• One 35 qt. waste container
Width: 15, 18, 21Depth: 24
BWRL Lattice Wine Rack
• Color matching interior
Width: 18, 21, 24Depth: 12
19
BBCR
• One door • One drawer
Width: 36, 39, 42, 45Depth: 24
ERB Easy Reach Base
• One bifold door
Width: 33, 36Depth: 21, 24
BBCL Blind Base BBCRFHD
• One Door
Width: 15, 18, 21, 24Depth: 24
BBCLFHD Blind Base Full Height Door
ERB 12”
12”
36”Wall
BBCL36/39BBCL39/42BBCL42/45BBCL45/48
27333945
9121518
Installation Example - Blind Corner Base
Item
OverallCabinet Width
Replaces Cabinetand Filler for
Designed to be pulled out of corner, see installation example at right. Specify L/R blind (blind right show). Blind Corner Base Cabinets can be reversed by relocating door and drawer. Filler is required. Order seperately.
Installation example below Installation example below
Width: 36Depth: 24
LSB Lazy Susan Base
• One bifold door
• One full height door
Width: 18, 21, 24Depth: 15, 18, 21, 24
SBFHD Sink Base Full Height Door SB Sink Base
• One false front• One door
Width: 18, 21, 24Depth: 15, 18, 21, 24
36394245
Reach
39424548
Min Max
Mullion Reveal
Min Max
9
Mullion Reveal3" Min Filler
Cabinet Width
Reach
Pull0000
3333
24”
24”
20
CSB Combo Sink Base
• One false front• Two doors• Two drawers
Width: 36, 39, 42, 45, 48Depth: 21, 24
DS
Width: 18, 21, 24, 27, 30, 36Depth: 21, 24Height: 6
Drawer Skirt
Width: 18, 21, 24, 27 30, 36Depth: 21, 24Height: 4
PD Pencil Drawer
• Two full height doors
Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
SBFHD Sink Base Full Height Door
NCM
Width: 18, 21, 24, 27, 30, 36Depth: 21, 24Height: 6
DST is trimmable and has 3” stiles.
DST Drawer Skirt Trimmable
Width: 18, 21, 24, 27 30, 36Depth: 21, 24Height: 4
PDT Pencil Drawer Trimmable
PDT is trimmable and has 3” stiles.
SB Sink Base
• One false front• Two doors
Width: 24, 27Depth: 15, 18, 21, 24
SB Sink Base• Two false fronts• Two doors
Width: 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
NCM NCM
MWC-B Microwave Cabinet Base
• One bottom drawer
Width: 27, 30, 33Depth: 24
21
REMOVABLE CABINETS
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24Shelves: 1 Adj. half depth
REM-B Removable Base
• Two drawers• Two doors
End panels are 3” shorter than cabinet
NCM
• Two doors
Width: 30, 33, 36, 39 42, 45, 49Depth: 21, 24Shelves: 1 Adj. half depth
REM-BFHD Removable Base FHD
End panels are 3” shorter than cabinet
UFAS-SB UFAS Sink Base
• Removable sink base• Color matching interior
Width: 30, 33, 36Depth: 21, 24
UFAS-SBFHD UFAS Sink Base FHD
• Removable sink base• Color matching interior
Width: 30, 33, 36Depth: 21, 24
• Knee clearance height in SKU
Width: 30, 33, 36Depth: 24, 21
UFAS-IO UFAS Sink Base Insert Only
• Two false fronts• Two doors
Width: 30, 33, 36, 39Depth: 12, 15, 18, 21, 24
REM-SB Removable SB
End panels are 3” shorter than cabinet
NCM
22
CABINET DEPTH: 24 (STD), 21DRAWER DEPTH:19HEIGHT: NTK HEIGHT:32-1/2 27
DOORS:• 09-24W Single Door • Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments
ACCESSIBLE CABINETS
HCB HC Base
• One door• One drawer
• Two doors • One drawer• Center mullion
Width: 9, 12, 15, 18, 21, 24Depth: 21, 24
Width: 24, 27Depth: 21, 24
• One door
Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24
HCBFHD HC Base Full Height Door
• Two doors• Center mullion
Width: 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
CODE TEMPLATE:CODE: HCBWIDTH: 15 HCB15-L-21D*DEPTH: 21 *Non std depth
added to code
EXAMPLES:HCB15-L, HCB24-L/R, HCB27, HCB15-L-21D, HCB27-21D
• Two doors• Two drawers• Center MullionWidth: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24
HCB HC Base
HCB HC Base
HCBFHD HC Base Full Height Door
NCM
NCM
NCM
TOE KICK HEIGHT: 5-1/2
HCD3B HC Drawer 3 Base
• Three equal sized drawers
Width: 12, 15, 18, 21, 24, 27, 30, 36Depth: 21, 24
23
HCD4B HC Drawer 4 Base
• Top drawer front 5.5” tall, remaining fronts equal
Width: 12, 15, 18, 21, 24, 27, 30, 36 Depth: 21, 24
HCBBS HC Base Bookshelf
• Color matching interior• Fixed middle rail
Width: 18, 21, 24, 27, 30Depth: 12, 21, 24
HCBTCP HC Single Trash Can Pullout
• One door• One drawer• One 35 qt. waste container
Width: 15, 18, 21Depth: 24
• One door• One drawer• Two 35 qt. containersWidth: 18, 21Depth: 24
HCBDTCP HC Double Trash Can Pullout
HC FHD Trash Can Pullout
• One door• One 35 qt. waste container
Width: 15, 18, 21Depth: 24
• One door• Two 35 qt. containers
Width: 18, 21Depth: 24
HCBFHDTCP HC FHD Double Trash CanHCBFHDDTCP
HCBBCR
• One door• One drawer
Width: 12, 15, 18, 21, 24Depth: 24
• One door
Width: 12, 15, 18, 21, 24Depth: 24
HCBBCRFHDHCBBCL HCBBCLFHD HC Blind Base HC Blind Base FHD
HCBBCL36/39HCBBCL39/42HCBBCL42/45HCBBCL45/48HCBBCL48/51
HCBBCLFHD36/39HCBBCLFHD39/42HCBBCLFHD42/45HCBBCLFHD45/48HCBBCLFHD48/51
24
HCERB 12”
12”
36”Wall
• Two doors
Width: 36Depth: 24
HCERB HC Easy Reach Base
• Two doors
Width: 33, 36Depth: 21, 24
HCLSB HC Lazy Susan Base
• One door
Width: 18, 21, 24Depth: 15, 18, 21, 24
HCSBFHD HC Sink Base FHD• Two doors• Center mullion
Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
HCSBFHD HC Sink Base FHD
HCSB HC Sink Base
Width: 15, 18, 21, 24Depth: 12, 15, 18, 21, 24
• One door• One false front
HCSB HC Sink Base
• Two doors• Two false front
Width: 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
Width: 24, 27Depth: 15, 18, 21, 24
• Two doors• One false front
HCSB HC Sink Base
NCM
NCM
NCM
• Two drawers• Two doors• One false front
Width: 36, 39, 42, 45, 48Depth: 21, 24
HCCSB Combo Sink Base
25
HCBWRL HC Lattice Wine Rack
• Color matching interior
Width: 18, 21, 24Depth: 12
HCBWR HC Base Wine Rack
• Color matching interior
Width: 18, 21, 24, 27, 30Depth: 12
26
REMOVABLE CABINETS
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24
REM-HCB HC Removable Base
• Two doors• Two drawers
End panels are 3” shorter than cabinet
NCM
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24
REM-HCBFHD Removable Base FHD
• Two doors
End panels are 3” shorter than cabinet
NCM
UFAS-HCSB
• Color matching interior
Width: 30, 33, 36Depth: 21, 24
UFAS HC Sink Base
NCM
UFAS-HCSBFHD UFAS HC Sink Base FHD
• Color matching interior
Width: 30, 33, 36Depth: 21, 24
NCM
• Knee clearance height in SKU
Width: 30, 33, 36Depth: 24, 21
UFAS-IO UFAS Sink Base Insert Only
• Two doors• Two false front
Width: 30, 33, 36, 39,Depth: 12, 15, 18, 21, 24
REM-HCSB Removable Sink Base
NCM
27
CABINET DEPTH: 24, 21 (STD)DRAWER DEPTH:19HEIGHT: 31-1/2
DOORS:• 09-24W Single Door• Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments
VANITY BASE CABINETS
CODE TEMPLATE:
CODE: VBWIDTH: 15 VB15-L-24D*DEPTH: 24
VB Vanity Base
• One door• One drawer
• Two doors• One drawer
Width: 9, 12, 15, 18, 21, 24Depth: 21, 24
Width: 24, 27Depth: 21, 24
• Two doors • Two drawer
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24
VB Vanity Base
VB Vanity Base
EXAMPLES:VB15-L, VB24-L/R, VB27, VB15-L-24D, VB27-24D
*Non std depth added to code
NCM
NCM
TOE KICK HEIGHT: 4-1/2
VBFHD VB Full Height Door
• One door
Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24
VBFHD VB Full Height Door
• Two doors
Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
NCM
• Three drawer• Equal sized drawers
Width: 12, 15, 18, 21, 24, 27, 30, 36Depth: 18, 21, 24
All drawer fronts are equal height
VD3B Base 3 Drawer
28
• Four drawer• Top drawer front is 5.5” tallWidth: 12, 15, 18, 21, 24, 27, 30, 36Depth: 18, 21, 24
Top drawer front 4.5” tall, remaining drawer fronts are equal
VD4B Base 4 Drawer
VSB Vanity Sink Base
• Two doors• Two false frontWidth: 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
VSB Vanity Sink Base
Width: 18, 21, 24Depth: 15, 18, 21, 24
Width: 24, 27Depth: 15, 18, 21, 24
VSB Vanity Sink Base
• One door• One false front
• Two doors• One false front
• One door
Width: 18, 21, 24Depth: 15, 18, 21, 24
VSBFHD Vanity Sink Base FHD
• Two doors• Center mullionWidth: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
VSBFHD Vanity Sink Base FHD
NCM NCM
NCM
CVSB Combo Vanity Sink Base
Width: 36, 39, 42, 45, 48Depth: 21, 24
• Two doors• One false front• Two drawers
29
REMOVABLE CABINETS
• Two doors• Two drawers
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24
REM-VB Removable Vanity Base
End panels are 3” shorter than cabinet
NCM
REM-VBFHD Removable Vanity Base FHD
• Two doors
Width: 30, 33, 36, 39, 42, 45, 48 Depth: 21, 24
NCM
UFAS-VSB
• Color matching interior
Width: 24, 27, 30, 33, 36, 39Depth: 21, 24
UFAS Vanity Sink Base UFAS-VSBFHD UFAS Vanity Sink Base FHD
• Color matching interior
Width: 24, 27, 30, 33, 36, 39Depth: 21, 24
NCM
• Two doors• Two false front
Width: 30, 33, 36, 39, 42, 45, 48Depth: 12, 15, 18, 21, 24
REM-VSB Removable Vanity Sink Base
NCM
30
• Three drawer• Top drawer front is 5.5” tall
Width: 12, 15, 18, 21, 24, 27, 30, 36Depth: 18, 21, 24
DKD3B Base 3 Drawer• Two drawer• Equal sized drawers
Width: 18, 21Depth: 18, 21, 24
DKD2B Base 2 Drawer
CABINET DEPTH: 24 (STD), 21DRAWER DEPTH:19HEIGHT: NTK HEIGHT:28-1/2 24
DOORS:• 09-24W Single Door • Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments
DESK BASE CABINETS
CODE OUTLINE:
CODE: DKBWIDTH: 15 DKB15-L-21D*DEPTH: 21 *Non std depth
added to code
EXAMPLES:DKB15-L, DKB24-L/R, DKB27, DKB15-L-21D, DKB27-21D
DKB Desk Base
• One door• One drawer
Width: 9, 12, 15, 18, 21, 24Depth: 21, 24
Width: 24, 27Depth: 21, 24
• One door
Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24
DKB Desk Base
DKBFHD Desk Base Full Height Door
• Two doors• One drawer• Center mullion
Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24
DKB Desk Base
• Two doors• Two drawers• Center mullion
NTK NTK NCM
NTK NCM
TOE KICK HEIGHT: 4-1/2
DKBBS Desk Base Bookshelf
• Color matching interior• Fixed middle rail
Width: 18, 21, 24, 27, 30Depth: 12, 21, 24
• Two doors• Center mullion
Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24
DKBFHD DK Base Full Height Door
NCM
All drawer fronts are equal height
31
CABINET DEPTH: 15, 12 (STD)
SHELF RULE: 12 – 18” No shelves21 – 27” 1 Shelf30 – 39” 2 Shelves 42” 3 Shelves
DOORS:• 09-24W Single Door • Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments
WALL CABINETS
CODE TEMPLATE:
CODE: WWIDTH: 15 W15-L-15D*
DEPTH: 15
W Wall
• One door
Width: 9, 12, 15, 18, 21, 24Height: 12, 15, 18, 21, 24, 27, 30, 36, 42Depth: 12, 15, 24 (no shelf)
• Two doors
Width: 24, 27, 30, 33, 36, 39Height: 12, 15, 18, 21, 24, 27, 30, 36, 42Depth: 12, 15, 24 (no shelf)
W Wall
WL Wall Linen
• One door• Bottom fixed opening is 4.5”
Width: 21 Height: 30Depth: 9, 12, 15
EXAMPLES:W09-L, W24-L/R, W27, W15-L-15D, W27-15D
*Non std depth added to code
No shelves on 24” and 27” height
WL Wall Linen
• Two doors• Bottom fixed opening is 4.5”
Width: 24, 27, 30Height: 30Depth: 9, 12, 15
No shelves on 24” and 27” height
NCM
NCM
32
• Color matching interior
Width: 18, 21, 24, 27, 30Height: 15, 18, 21, 24, 27, 30Depth: 12
WR Wine Rack
• Color matching interior• 36” tall up to 18” wide• 30” tall up to 24” wide• 36” wide up to 18” tall• 30 wide up to 24” tall
Width: 18, 21, 24, 27, 30 Height: 18, 21, 24, 27, 30, 36Depth: 12
WRL Wine Rack Lattice
Size restrictions on certain dimensions - detailed above.
• Two doors• Microwave opening is 13-1/2” high
Width: 24, 27, 30, 33, 36Height: 30, 36, 42Depth: 12, 24
• Color matching interior
Width: 12, 15, 18, 21, 24, 27, 30Height: 18, 21, 24, 27, 30, 36, 42Depth: 9, 12, 15
MWC Microwave Wall BS Wall Book Shelf
Microwave shelf (MWS) has to be ordered seperately
NCM
33
Width: 24Height: 18, 24, 30, 36, 42Depth: 12
A Angle Wall Cabinet
Width: 27Height: 18, 24, 30, 36, 42Depth: 15
A Angle Wall Cabinet
Width: 12, 15, 18, 21, 24Height: 30, 36, 42Depth: 12
WBCL WBCR
Blind Wall Corner
Width: 27, 30 Height: 30, 36, 42Depth: 12
WBCL WBCR
Blind Wall Corner
• One door • Two door
Full Overlay for Wall Blind Corner
WBCL24/27xxWBCL27/30xxWBCL30/33xxWBCL33/36xx
24273033
CabinetWidthItem
CabinetReplaced
FO Pull FO Reach
12151821
1.51.51.51.5
Installation example below Installation example below
Cabinet Width
1 1/2" min FO Filler3/4" min FO Filler
Pull
Reach
Mullion Reveal
4.54.54.54.5
25.528.531.534.5
28.531.534.537.5
Standard Overlay for Wall Blind Corner
24273033
CabinetWidthItem
CabinetReplaced
SO Pull SO Reach
12151821
.75
.75
.75
.75
4.54.54.54.5
24.7527.7530.7533.75
28.531.534.537.5
Min Max Min Max
Min Max 3 6
WBCL24/27xxWBCL27/30xxWBCL30/33xxWBCL33/36xx
34
Width: 24, 27Height: 30, 36, 42Depth: 12, 15
ERW Easy Reach Wall
Width: 1 5Height: 18, 21, 24, 27, 30, 36
MC Medicine Cabinet
35
P Pantry Cabinet
• One door top and bottom• 4-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
• Two doors top and bottom• 4-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
LC Linen Cabinet
• One door top and bottom• 4-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
• Two doors top and bottom• 4-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
LC Linen Cabinet
CABINET DEPTHS: 12, 18, 21, 24
DOORS:• 09-24W Single Door • Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments
CODE TEMPLATE:
CODE: PWIDTH: 15 P1584-L-21D*
HEIGHT: 84
EXAMPLES:P1290-L, P2484-L/R, P2790, P1596-R-15D
*Non std depth added to code
TALL CABINETS
DEPTH: 21
NTK NTK
NTKNTK
P Pantry Cabinet
36
• One door top and bottom• Flip down drawer front between doors• 4-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21 (std), 24
• Two doors top and bottom• Flip down drawer front between doors• 4-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21 (std), 24
LHC Linen Hamper LHC Linen Hamper
• One door top and bottom• 4-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
UC Single Utility Cabinet
NTK
NTK NTK
• Color matching interior
Width: 12, 15, 18, 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24
TBS Tall Bookshelf
• Two doors top and bottom• 4-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
UC Double Utility Cabinet
NTK
37
OC Single Oven - 3 Drawer
• 4-1/2” toe kick
Width: 30, 33, 36Height: 84, 90, 96Depth: 24, 26
NTK
OC Single Oven - 2 Drawer
• 4-1/2” toe kick
Width: 30, 33, 36Height: 84, 90, 96Depth: 24, 26
NTK
OC Single Oven - 1 Drawer
• • 4-1/2” toe kick
Width: 30, 33, 36Height: 84, 90, 96Depth: 24, 26
NTK
Installation Example - Oven Cabinets
6” Rail can becut down to 1-1/2”
6” Rail is removable and can be reinserted where drawer has been removed if needed.
Possible Opening Sizes
24” t
o 34
.5”
32.5
” to
43”
Designed to be cut to fit the majority of manufactured oven units. The maximum and minimum dimension shown are on-the-job modifications of the opening in height and width for the appliance to be used.
41” t
o 51
.5”
49.5
” to
60”
Cutout Widths:
30” WideMinimum - 24”Maximum - 28 - 1/2”
33” WideMinimum - 27”Maximum - 31-1/2”
36” WideMinimum - 30”Maximum - 34-1/2”
38
TALL ACCESIBLE CABINETS
HCP HC Pantry Cabinet
• One door top and bottom• 5-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
• Two doors top and bottom• 5-1/2” toe kick
Width: 24, 27, 30, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
NTK NTK
HCP HC Pantry Cabinet
HCLC HC Linen Cabinet
• One door top and bottom• 5-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
• Two doors top and bottom• 5-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
HCLC HC Linen Cabinet
NTKNTK
39
• One door top and bottom• 5-1/2” toe kick
Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21 (std), 24
• Two doors top and bottom• 5-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21 (std), 24
HCLHC HC Linen Hamper HCLHC HC Linen Hamper
NTK NTK
• One door top and bottom• 5.5” toe kick
Width: 12, 15, 18, 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
HCUC HC Single Utility Cabinet
NTK
TALL ACCESIBLE CABINETS
• Two doors top and bottom• 5-1/2” toe kick
Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)
NTK
HCUC HC Double Utility Cabinet
40
TALL ACCESIBLE CABINETS
• Color matching interior• 5.5” toe kick
Width: 12, 15, 18, 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12 (std), 18, 21, 24
HCTBS HC Tall Bookshelf
41
Panels1/2”3/4”
BaseBase Depth VanityVanityVanity Depth Base
HC Base84” Tall Base90” Tall Base96” Tall Base
84” Tall Vanity Depth90” Tall Vanity Depth96” Tall Vanity Depth48” Wide Base Height
48” Wide Vanity Height1/2 SheetFull Sheet
EP2434 - PaperEP2431 - PaperEP2131 - PaperEP2124 - Paper
EP2432 - PaperEP2484 - PaperEP2490 - PaperEP2496 - Paper
EP2184 - PaperEP2190 - PaperEP2196 - PaperEP4834 - Paper
EP4831 - PaperEP4848 - PaperEP4896 - Paper
EP2434 - VeneerEP2431 - VeneerEP2131 - VeneerEP2134 - Veneer
EP2432 - VeneerEP2484 - VeneerEP2490 - VeneerEP2496 - Veneer
EP2184 - VeneerEP2190 - VeneerEP2196 - VeneerEP4834 - Veneer
EP4831 - VeneerEP4848 - VeneerEP4896 - Veneer
24-1/8”W x 34-1/2”H24-1/8”W x 31-1/2”H21-1/8”W x 31-1/2”H21-1/8”W x 34-1/2”H
24-1/8”W x 32-1/2”H24-1/8”W x 84”H24-1/8”W x 90”H24-1/8”W x 96”H
21-1/8”W x 84”H21-1/8”W x 90”H21-1/8”W x 96”H48”W x 34-1/2”H
48”W x 31-1/2”H48”W x 48”H48”W x 96”H
Grain pattern runs vertical and each panel is banded on front and back edges
1/2” Paper 3/4” Veneer Actual Size
Return PanelsBase 3” Front DW End PanelBase 6” Front DW End PanelBase 9” Front DW End PanelBase Depth Vanity 3” Front
Base Depth Vanity 6” FrontBase Depth Vanity 9” FrontVanity 3” FrontVanity 6” Front
Vanity 9” FrontVanity Depth Base 3” FrontVanity Depth Base 6” FrontVanity Depth Base 9” Front
HC Base 3” FrontHC Base 6” FrontHC Base 9” FrontHC Vanity 3” Front
HC Vanity 6” FrontHC Vanity 9” Front84” Tall Base Depth 3” Front90” Tall Base Depth 3” Front
96” Tall Base Depth 3” Front84” Tall Vanity Depth 3” Front90” Tall Vanity Depth 3” Front96” Tall Vanity Depth 3” Front
BRP3 BRP6 BRP9 VRP3 - 24D
VRP6 - 24DVRP9 - 24DVRP3VRP6
VRP9BRP3 - 21DBRP6 - 21DBRP9 - 21D
HCBRP3HCBRP6HCBRP9HCBRP3 - 21D
HCBRP6 - 21DHCBRP9 - 21DTRP384TRP390
TRP396TRP384 - 21 DeepTRP390 - 21 DeepTRP396 - 21 Deep
BRP3 - SolidBRP6 - SolidN/AVRP3 - Solid - 24D
VRP6 - Solid - 24DN/AVRP3 - SolidVRP6 - Solid
N/ABRP3 - Solid - 21DBRP6 - Solid - 21DN/A
HCBRP3 - SolidHCBRP6 - SolidN/AHCVRP3 - Solid
HCVRP6 - SolidN/ATRP384 - SolidTRP390 - Solid
TRP396 - SolidTRP384 - Solid - 21DTRP390 - Solid - 21DTRP396 - Solid - 21D
3”W x 34-1/2”H x 24-1/8”D6”W x 34-1/2”H x 24-1/8”D9”W x 34-1/2”H x 24-1/8”D3”W x 31-1/2”H x 24-1/8”D
6”W x 31-1/2”H x 24-1/8”D9”W x 31-1/2”H x 24-1/8”D3”W x 31-1/2”H x 24-1/8”D6”W x 31-1/2”H x 24-1/8”D
9”W x 31-1/2”H x 24-1/8”D3”W x 34-1/2”H x 24-1/8”D6”W x 34-1/2”H x 24-1/8”D9”W x 34-1/2”H x 24-1/8”D
3”W x 32-1/2”H x 24-1/8”D6”W x 32-1/2”H x 24-1/8”D9”W x 32-1/2”H x 24-1/8”D3”W x 32-1/2”H x 21-1/8”D
6”W x 32-1/2”H x 21-1/8”D9”W x 32-1/2”H x 21-1/8”D3”W x 84”H x 24-1/8”D6”W x 90”H x 24-1/8”D
9”W x 96”H x 24-1/2”D3”W x 84”H x 21-1/2”D3”W x 90”H x 21-1/2”D3”W x 96”H x 21-1/8”D
Dishwasher End Panel shown
- order as a BRP
1/2” Return w/ Veneer Front 3/4” Solid Actual Size
3”6”24”
34-1/2”
42
End SkinBase CabinetBase Depth VanityVanity CabinetVanity Depth Base
HC Base CabinetHC Vanity Cabinet12” Tall Wall Cabinet15” Tall Wall Cabinet
18” Tall Wall Cabinet24” Tall Wall Cabinet30” Tall Wall Cabinet36” Tall Wall Cabinet
42” Tall Wall Cabinet84” Tall Pantry90” Tall Pantry96” Tall Pantry
84” Tall Linen90” Tall Linen96” Tall Linen48” Wide Base Skin
48” Wide Vanity Skin1/2 SheetFull Sheet
SK2434 - PaperSK2431 - PaperSK2131 - PaperSK2134 - Paper
SK2432 - PaperSK2132 - PaperSK1212 - PaperSK1215 - Paper
SK1218 - PaperSK1224 - PaperSK1230 - PaperSK1236 - Paper
SK1242 - PaperSK2484 - PaperSK2490 - PaperSK2496 - Paper
SK2184 - PaperSK2190 - PaperSK2196 - PaperSK4834 - Paper
SK4831 - PaperSK4848 - PaperSK4896 - Paper
SK2434 - VeneerSK2431 - VeneerSK2131 - VeneerSK2134 - Veneer
SK2432 - VeneerSK2132 - VeneerSK1212 - VeneerSK1215 - Veneer
SK1218 - VeneerSK1224 - VeneerSK1230 - VeneerSK1236 - Veneer
SK1242 - VeneerSK2484 - VeneerSK2490 - VeneerSK2496 - Veneer
SK2184 - VeneerSK2190 - VeneerSK2196 - VeneerSK4834 - Veneer
SK4831 - VeneerSK4848 - VeneerSK4896 - Veneer
23-3/8”W x 34-1/2”H23-3/8”W x 31-1/2”H20-3/8”W x 31-1/2”H20-3/8”W x 34-1/2”H
23-3/8”W x 32-1/2”H20-3/8”W x 32-1/2”H11-1/4”W x 12”H11-1/4”W x 15”H
11-1/4”W x 18”H11-1/4”W x 24”H11-1/4”W x 30”H11-1/4”W x 36”H
11-1/4”W x 42”H23-3/8”W x 84”H23-3/8”W x 90”H23-3/8”W x 96”H
20-3/8”W x 84”H20-3/8”W x 90”H20-3/8”W x 96”H48”W x 43-1/2”H
48”W x 31-1/2”H48”W x 48”H48”W x 96”H
This application dipicts a skin applied to a Pantry Cabinet
1/8” Paper 3/16” Veneer Actual Size
Skirts 3/4” Veneer 3/4” Solid Actual Size
3” Wide Skirts
4” Wide Skirts
SKT30SKT36SKT42SKT48SKT60SKT72SKT84SKT96
SKT30 - 4WSKT36 - 4WSKT42 - 4WSKT48 - 4W SKT60 - 4WSKT72 - 4WSKT84 - 4WSKT96 - 4W
SKT30 - SolidSKT36 - SolidSKT42 - SolidSKT48 - SolidSKT60 - SolidSKT72 - SolidSKT84 - SolidSKT96 - Solid
SKT30 - Solid - 4WSKT36 - Solid - 4WSKT42 - Solid - 4WSKT48 - Solid - 4WSKT60 - Solid - 4WSKT72 - Solid - 4WSKT84 - Solid - 4WSKT96 - Solid - 4W
3”W x 30”L3”W x 36”L3”W x 42”L3”W x 48”L3”W x 60”L3”W x 72”L3”W x 84”L3”W x 96”L
4”W x 30”L4”W x 36”L4”W x 42”L4”W x 48”L4”W x 60”L4”W x 72”L4”W x 84”L4”W x 96”L
Color matching front and bottom
43
Fillers
30” Long
36” Long
42” Long
84” Long
90” Long
96” Long
F330F330F630F930
F336F336F636F936
F342F342F642F942
F384F384F684F984
F390F390F690F990
F396F396F696F996
F330 - SolidF330 - SolidF630 - Solid N/A
F636 - SolidF636 - SolidF636 - SolidN/A
F342 - SolidF342 - SolidF642 - SolidN/A
F384 - SolidF384 - SolidF684 - SolidN/A
F390 - SolidF390 - SolidF690 - SolidN/A
F396 - SolidF396 - SolidF696 - SolidN/A
3/4”W x 30”H3”W x 30”H6”W x 30”H9”W x 30”H
3”W x 36”H3”W x 36”H6”W x 36”H9”W x 36”H
3/4”W x 42”H3”W x 42”H6”W x 42”H9”W x 42”H
3/4”W x 84”H3”W x 84”H6”W x 84”H9”W x 84”H
3/4”W x 90”H3”W x 90”H6”W x 90”H9”W x 90”H
3/4”W x 96”H3”W x 96”H6”W x 96”H9”W x 96”H
3/4” Veneer 3/4” Solid Actual Size
Microwave ShelfCabinet Width
MWC24xx
MWC27xx
MWC30xx
MWC33xx
MWC36xx
MWC42xx
Microwave Cabinet Shelf Name Shelf Width
24”
27”
30”
33”
36”
42”
MWS2418
MWS2718
MWS3018
MWS3318
MWS3618
MWS4218
21”
24”
27”
30”
33”
36”
44
1/8” Toe Kick Overlay
DOOR
• Specify door dimensions W x H
Applied Doors
WCP15 Wall Cabinet Corner Floor
Width: 15Height: 15Thick: 1/2
ROS
ROS12 - Fits 12” and 24” CabinetsROS15 - Fits 15” and 30” CabinetsROS18 - Fits 18” and 36” CabinetsROS21 - Fits 21” and 42” CabinetsROS24 - Fits 24” (NCM) and 48” CabinetsROS27 - Fits 27” (NCM) Cabinets
Roll Out Shelf Kit
Cabinet is ordered seperately. Kit is applied in the field
STV Valance
• Horizontal grain only
Length: 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 48Height: 3
RF Range front
• Range front
Length: 24, 27, 30, 33, 36Height: 4
METAL LEG Metal Furniture Foot
• Metal furniture foot with leveler and mounting bracket• Brushed finish
Size: 30mm x 30mmHeight: 4-1/2
One leg is needed to support each end of a cabinet run and one leg needed to support the joint between two cabinets.
• 8 ft. length• Color matching finish
TKHCTK 3/16” Veneer Toe Kick Overlay
• 8 ft. length• Color matching finish
TK- VeneerHCTK-Veneer
• Finish is available in natural or white
45
Molding - Flat Molding - Scribe
1/8” x 3/4” x 8” 1/8” x 1-3/4” x 8’
Outside Molding Inside Molding Shoe Molding
3/4” x 3/4” x 8’ 3/4” x 3/4” x 8 3/4” x 3/4” x 8
Molding - Crown Molding - Large Crown
2-3/4” x 8’1-5/8” x 8’
SCRIBE96
OCM96 ICM96 SHOEL96
46NOTE: Due to various printing limitations or monitor displays, color pictures cannot be guaranteed to exactly match the actual cabinet material.
©2016 LEEDO FRAMED PRODUCT LINE CATALOG 1/16
NOTICE: The framed cabinet specifications appearing herein supersede and cancel all previous sheets, supplements and addenda, and represent current manufacturing standards and procedures. Leedo Cabinetry reserves the right to make specification changes for continued product improvement. Leedo warrants all structural aspects of our products for a period of one year, excluding the results of normal wear and tear, damages that arise from misuse, and open joint lines on that occur from natural expansion and contraction of wood.
CARB2compliant