LEED Green Associate Exam Study Sessions Flashcards o Sourced from LEED for Existing Buildings Reference Guide Glossary – an official reference for the.

LEED Green Associate Exam Study Sessions Flashcards

o Sourced from LEED for Existing Buildings Reference Guide Glossary – an official reference for the exam

o Screened for definitions and standards related to Exam Specifications plus a few highly applicable to green building practice in general

The organization that created the Green Score standard; and it sets a rating of 40 or more for

vehicles to be considered low-emitting and fuel-efficient.

ACEEE (American Council for an Energy Efficient

Economy)

A measure of the ability of a surface material to reflect sunlight.

Albedo

The area comprised of all contiguous land that is associated with and supports normal building

operations for the LEED project building, including all land that was or will be disturbed for the

purpose of undertaking the LEED project.

LEED Boundary

A standard for thermal comfort - air and radiant temperatures, air speed, and humidity.

ASHRAE (American Society of Heating,

Refrigerating and Air-conditioning

Engineers) 55 (-2004)

A standard for minimum ventilation rates for acceptable Indoor Air Quality.

ASHRAE(American Society of Heating,

Refrigerating and Air-conditioning

Engineers) 62.1 (-2007)

Mainly, this standard establishes minimum energy performance requirements in the EA category, but it is also referenced in relation to Light Pollution

Reduction, in the SS category.

ASHRAE(American Society of Heating,

Refrigerating and Air-conditioning

Engineers) 90.1 (-2007)

Wastewater from toilets and urinals.Some authorities having jurisdiction may also

wastewater from include kitchen sinks, showers, or bathtubs.

Blackwater

Standard practice for calculating Solar Reflectance Index (SRI) of horizontal and low-sloped opaque

surfaces.

ASTM (American Society for Testing and

Materials) E1980 (-01)

The area of the site occupied by the building structure, not including parking lots, landscapes,

and other non-building facilities.

Building Footprint

Hydrocarbons that are used as refrigerants and cause depletion of the stratospheric ozone layer.

Banned by the Montreal Protocol as of 1995.

Chlorofluorocarbons (CFCs)

Defined by the Uniform Plumbing Code as untreated household waste water which has not

come into contact with toilet waste.

Graywater

The ratio of the radiation emitted by a surface after exposure to sunlight to the radiation emitted by a

black body at the same temperature.

Emissivity

An EPA standard that outlines a set of provisions construction operators must follow to comply with

NPDES stormwater regulations.

Construction General Permit

A joint program of the U.S. EPA and DOE that promotes energy-efficient buildings, products, and practices: it is

used mainly in regards to building Minimum and Optimized Energy Performance, as well as for Appliances and Office Equipment. However, the standard is also used for initial

reflectance measurements of Roofing Products.

ENERGY STAR

An online tool that helps track and assess energy and water consumption.

ENERGY STAR Portfolio Manager

An online tool that can establish energy performance goals for a project.

ENERGY STAR Target Finder

This federal law establishes regulations on the use, leakage and the recycling of ozone-depleting

compounds.

EPA Clean Air Act (Title VI - section 608)

A U.S. Act; and law, which is referred to in the Water Efficiency category in regards to fixtures and

fixture fittings (where applicable) such as: water closets, urinals, lavatory faucets, showers, kitchen

sink faucets and pre-rinse spray valves.

Energy Policy Act 1992

A Federal agency which is referred to in LEED in regards to the 100-year flood definition.

FEMA (Federal Emergency

Management Agency)

A testing program which certifies floor covering products for compliance with indoor air quality

emissions. Floor covering products include: vinyl, linoleum, laminate flooring, wood flooring, ceramic

flooring, rubber flooring and wall base.

FloorScore

An independent, non-profit organization established to promote the responsible

management of the world's forests. It labels products that come from responsibly managed

forest and from verified recycled sources.

FSC (Forest Stewardship Council)

Created by the Carpet and Rug Institute (CRI), this standard sets VOC limits for carpet and carpet

cushion products

Green Label Plus

A standard for low VOC material and green cleaning products. This standard includes adhesives, paints, coatings, and cleaning

products.

Green Seal

A program established by the Center for Resource Solutions (CRS) to both promote green electricity products

and provide consumers with a rigorous and nationally recognized method to identify those products. This

standard is referred to in the relation to Green Power - mainly, Renewable Energy Credits (RECs) and utility green

pricing programs.

Green-e

A certification program with performance-based standards which define goods with low chemical

and particle emissions for use indoors. This standard is mainly referred in relation to furniture

and seating products being used.

GREENGUARD

A roof or portion of a roof on a building that is covered with vegetation and a growing medium, planted over a waterproofing membrane. They

help keep air above roofs cool, treat stormwater, and create habitat.

Green Roof

A nonprofit organization founded in New York in 1906. It publishes lighting design and illumination standards that are often used in conjunction with

ASHRAE standards for energy efficiency.

IESNA (Illuminating Engineering Society of

North America)

This industry standard defines maximum flow rates and consumption for plumbing fixtures and fittings, including public and private lavatories, showerheads, sink faucets, urinals, and water closets. This code is developed by the

International Code Council (ICC). (Note: the Uniform Plumbing Code [UPC] 2006 also defines water-conserving

fixtures)

International Plumbing Code (IPC) 2006

This International standard defines terms and suggests best practices for quantifying the results of energy efficiency investments and renewable

energy projects through measurement and verification.

IPMVP (International Performance

Measurement and Verification Protocol)

A standard used to define Recycled Content - Environmental labels and declarations.

ISO 14021 (-1999)

A filter rating established by ASHRAE in its Method of Testing General Ventilation Air Cleaning Devices

for Removal Efficiency by Particle Size.

MERV (Minimum Efficiency Reporting

Value)

A landmark international agreement designed to protect the stratospheric ozone layer. Within

LEED, this standard is referred to in regards to phasing out CFCs and HCFCs in refrigerants.

Montreal Protocol

This Institute is a nonprofit, public-benefits corporation Its mission is to promote energy efficiency in buildings through technology research, guidelines, and codes. LEED refers to

this institute's "Advanced Buildings Core Performance Guide" in regards to Minimum Energy Performance. They also conduct studies in on the benefits of green building

and LEED.

NBI (New Buildings Institute)

A measure of a material’s ability to reject solar heat. Standard black is 0 and standard white is

100.

Solar Reflective Index

This standard's ruling sets VOC limits for paints and coatings.

SCAQMD (South Coast Air Quality

Management District) Rule 1113

This standard ruling sets VOC limits for adhesives, sealants and sealant primers.

SCAQMD (South Coast Air Quality

Management District) Rule 1168

An international association of HVAC contractors; which sets IAQ guidelines for occupied buildings

under construction - to maintain healthful indoor air quality during demolitions, renovations, and

construction.

SMACNA (Sheet Metal and Air-conditioning Contractors' National

Association)

This standard identifies water-efficiency products and programs for some high-efficiency fixtures or fittings. It is a partnership program created by the

EPA.

WaterSense

The speed at which an appliance loses refrigerant, measured between refrigerant changes or over 12

months, whichever is shorter.

Leakage Rate

The percentage of materials in a product that is recycled from manufacturing waste. Examples include sawdust, trim materials, and agriculture wastes. Excluded are materials such as rework,

regrind, or scrap being reclaimed within the same process that generated it.

Pre-Consumer or Post-Industrial Recycled

Content