3 A I N M T E W N O A L N C E Key specifications: 230V 50/60Hz IP65 NON DIMMABLE 1480mm 118mm 1000mm 1064mm 69.5mm 118mm 80mm Sensor Coverage: Max:7.5m Max:7.5m 2.4 - 6m Height of installation: 2.4 - 6m Detection Range (installation height 2.4-6m) Detection Angle Min:1.5m Min:1.5m 0 360 RTWPLED25MW LED Batten lights are designed for the straight replacement of existing 2 x 5ft fluorescent fittings. They come complete with microwave sensor and remote control and are suitable for the most demanding environments, such as multi-storey car parks and workshops. The sensor adjustable presets include time delay, sensitivity and lux. Supplied with terminal blocks for series and master-slave wiring. With a smooth and even light distribution it provides up to 50% energy saving against T8 fluorescent. 5ft 80W LED Non Corrosive Weatherproof Fitting - IP65 with Microwave Sensor and Remote Control Dimensions: • Voltage Range: 220-240V • Nom. Watts: 80W • Lumen Output: 8400lm • Colour Temp.: 5000K • IP Rating: IP65 • Warranty: 3 Years • CRI >80 • Power Factor >0.9 • ABS Base • Stainless Steel Clips • Dimensions: (H)65*(L)1480*(W)118mm • Not Dimmable • Remote control • Series & Master-Slave wiring Sensor Specifications: • Detection Range: 3-15m • Installation Height: 2.4-6m • Time adjustment: 10sec - 60min • Detection Angle: 360° • Maximum Load: LED - 500W Resistive/Tungsten - 1000W • Remote control range: up to 10m • Sensor Override Facility