Navigating the Periodic Table: Investigation of the Electronic Structure of Elements Lecture 4 Ch.3, 4.1-4.3 Suggested HW Ch 3: 4, 28 Ch 4: 1, 4, 5, 12
Feb 23, 2016
Navigating the Periodic Table: Investigation of the
Electronic Structure of Elements
Lecture 4
Ch.3, 4.1-4.3
Suggested HWCh 3: 4, 28
Ch 4: 1, 4, 5, 12
• Elements can be metals, nonmetals, or semiconductors (we will discuss semiconductors later)
Physical Characteristics of Metal
• Malleable • Ductile• Conductive of electricity • Conductive of heat• Have luster and shine• Very High Melting Points
Elemental Classifications
S(s)
O2 (g)
Elemental Classifications
He (g)
Physical Characteristics of Nonmetals• Most nonmetals are gases• Non conductive of heat and
electricity• Nonmetal solids are brittle, powdery• Low melting points
All elements LEFT of the black line are metals, except Hydrogen.
• Certain elements are unstable, and hence, do not commonly exist as individual species, but as diatomic molecules
• These include H, O, N, and all of the halogens (group 17)
H H2 (Hydrogen gas)O O2 (Oxygen gas)N N2 (Nitrogen gas)F, Cl, Br, I F2, Cl2, Br2, I2 (Fluorine gas, chlorine gas, bromine gas and iodine gas)
Chemical Groups and Diatomic Molecules
• Molecules are formed by the atomic bonding. There are two types of bonds: IONIC and COVALENT. Special rules exist for naming molecules of each type.
• Ionic bonds form between metal ions and nonmetal ions (further detail provided in chapter 6)
• To name an ionic compound, you do the following1. Write the name of the metal2. Follow it with the ionic name of the nonmetal
Example• KF Potassium Fluoride
Nomenclature: Ionic Compounds
• Covalent bonds form between two nonmetals (further detail provided in chapter 7)
• To name an covalent compound:1. Write the name of the first nonmetal.
For non-unity subscripts, use greek prefixes (shown on right)
2. Follow that with the ionic name of the second nonmetal. Again, include greek prefixes. Only use mono- for oxygen containing molecules.
Nomenclature: Covalent Compounds
ExamplesCO carbon monoxide N2S dinitrogen sulfideCO2 carbon dioxide P4Se10 tetraphosphorus decaselenide
Nomenclature: Hydrogen• Hydrogen is strange. It’s a nonmetal, but tends to react in
a manner similar to that the metals in group 1.
1. If hydrogen is listed first (not including halogens), use ionic rules to name the molecule.
Ex. H2S = hydrogen sulfide
2. Hydrogen halides (HX where X is a halogen) are acids and are named as such. We drop –gen and end the second nonmetal with the suffix “–ic acid”
HCl = hydrochloric acid ; HF = hydrofluoric acid
3. If hydrogen is listed last, it is a hydride anion (H-) Ex. MgH2 = magnesium hydride; TeH2 = tellerium dihydride
Group Work• Name the following:
1. SrO2. IF3
3. HBr4. CF4
5. NaH
• As you can see from the chemical equation shown to the left, products typically exhibit vastly different characteristics the reactants
• Also recall our discussion on the law of conservation of mass. Based on this law, can you find a problem with the equation written shown?
𝐍𝐚 (𝐬 )+𝐂𝐥𝟐 (𝐠 )→𝐍𝐚𝐂𝐥 (𝐬 )?
Chemical Reactions
• Mass can not be created or destroyed. This means that every element contained in the reactants must be accounted for in the product(s)
• There are two chlorine atoms on the reactant side, and only one chlorine atom one the product side. To balance the chlorine atoms, we add a coefficient of 2 to the NaCl(s)
• We have balanced the chlorine atoms, but the sodium atoms are now unbalanced. We add a coefficient of 2 to the Na (s). The reaction is now balanced.
𝐍𝐚 (𝐬 )+𝐂𝐥𝟐 (𝐠 )→𝐍𝐚𝐂𝐥(𝐬)
Balanced Reactions
𝐍𝐚 (𝐬 )+𝐂𝐥𝟐 (𝐠 )→𝟐𝐍𝐚𝐂𝐥(𝐬)
𝟐𝐍𝐚 (𝐬 )+𝐂𝐥𝟐 (𝐠 )→𝟐𝐍𝐚𝐂𝐥 (𝐬)
• The balanced equation above says that two Na atoms react with one chlorine gas molecule to produce two molecules of NaCl
• The coefficient of 2 means that there are two separate Na atoms
• The subscript of 2 indicates two Cl atoms bonded together in a single molecule
• Do not confuse coefficients and subscripts. Do not alter subscripts when balancing.
Na Na Cl Cl NaCl
NaCl
Coefficients And Subscripts𝟐𝐍𝐚 (𝐬 )+𝐂𝐥𝟐 (𝐠 )→𝟐𝐍𝐚𝐂𝐥 (𝐬)
• Before carrying out any calculations, it is imperative that you first confirm that a given chemical equation is balanced.
• The rules for balancing a chemical equation are provided below.
1. First, balance those elements that appear only once on each side of the equation
2. Balance the other elements as needed. Pay attention to subscripts.
3. Include phases
Tips For Balancing Reactions
• Let’s balance the equation below using the rules from the previous slide.
C3H8 (s) + O2 (g) CO2 (g) + H2O (L) • We’ll balance C first.
• Now balance H.
C3H8 (s) + O2 (g) 3 CO2 (g) + H2O (L)
C3H8 (s) + O2 (g) 3 CO2 (g) + 4 H2O (L)
• Now balance O.
C3H8 (s) + 5 O2 (g) 3 CO2 (g) + 4 H2O (L)
Tips For Balancing Reactions
Balance the following:
1. Sulfur (s) + Oxygen gas (g) Sulfur trioxide (g)
2. Nitrogen gas (g) + Hydrogen gas (g) NH3 (ammonia gas)
3. C4H10 (L) + O2 (g) CO2 (g) + H2O (g)
Group Work
• As scientists first began to discover and classify the elements, patterns and similarities were observed in chemical behaviors of certain groups of elements.
• Consider the three metals Li, Na, and K– All 3 metals are soft– All 3 metals are less dense than water– All 3 metals have similar appearance and low melting
points– The most interesting feature is that all 3 metals react
with the same elements in a nearly identical manner• As you see in the periodic table, these elements are all
listed in the same group, or vertical column.
Chemical Groups And Periodicity
• Dmitri Mendeleev created the periodic table in in 1869 by arranging the elements from left to right in order of increasing atomic number, and vertically according to their behavior (groups)
• In doing so, he observed repetitive patterns in chemical behavior across periods (horizontal rows)
• This periodicity is described in the next slide.
Chemical Groups And Periodicity
Totally unreactive gas
3Li
4Be
Highly reactive, highly conductive metal
Less reactive, less conductive metal
6C
9F
10Ne
Nonconductive, nonmetallic solid
Highly reactive, diatomic, nonmetallic gas
Decreasing metallic character
Totally unreactive gas
11Na
12Mg
Highly reactive, highly conductive metal
Less reactive, less conductive metal
14Si
17Cl
18Ar
Slightly conductive semi-metal
Highly reactive, diatomic, nonmetallic gas
Totally unreactive gas
19K
20Be
Highly reactive, highly conductive metal
Less reactive, less conductive metal
22Ge
25Br
26Kr
Highly reactive, diatomic, nonmetallic liq.
Decreasing metallic character
Decreasing metallic character
Slightly conductive semi-metal
Chemical Groups And Periodicity
• We must now answer many questions about chemical reactivity.
– Why is it that some atoms join together and form molecules, while others can’t?
– Why is there such wide variation in the reactivity and physical properties of elements?
– Why is there periodic repetition (periodicity) of the chemical/physical properties of elements as we move across the periodic table?
WHY?
• As previously discussed, Mendeleev noticed that chemical behavior was repeated periodically when elements were sorted by increasing atomic number
• The existence of periodicity proves a very important point:
The number of protons in the nucleus has no effect on chemical behavior. If it were so, chemical behaviors would
never repeat given that no two elements have the same atomic number.
The chemical behavior of an element must be dictated by the configuration of electrons around the nucleus.
Explanation Of Elemental Groups
• A direct indication of the arrangement of electrons about a nucleus is given by the ionization energies of the atom
• Ionization energy (IE) is the minimum energy needed to remove an electron (form a cation) completely from a gaseous atom – Ionizations are successive. – As you remove one electron, it becomes increasingly difficult
to remove the next because of the increasing attraction between the remaining electrons and the protons in the nucleus
𝑀→𝑀+¿+𝑒−¿
𝑀 +¿→𝑀2 +¿+𝑒 −¿ ¿
1st Ionization Energy 2nd Ionization Energy
IE1 < IE2 < IE3 …….IEn
Ionization Energy
• By measuring the energy required to remove electrons from an element, you can gain an idea of how “willing” an atom is to lose an electron, and relate this to its reactivity
• In the next slide, you will see data from an experiment in which the 1st ionization energies of elements are plotted against atomic number.
Ionization Energy
1st Ionization Energy Shows A Periodic Trend For T
very difficult to ionize
very easy to ionize
• It is relatively easy to remove electrons from group 1 metals.– It becomes increasingly
difficult as you move right across the periodic table, and up a group.
• It takes a very large amount of energy to ionize a noble gas.
• Like chemical properties, ionization energies are also periodic.
The lower the ionization energy of an element, the
more METALLIC and REACTIVE it is.
Ionization Energy
• The closer an electron is to the nucleus, the harder it would be to pull the electron away. – By carrying out multiple ionizations, we can gain
insight into the arrangement of electrons around the nucleus of the element.
Electron Arrangement (Electronic Structure)
• Using the table of ionization energies in the previous slide, calculate the energy required to ionize Be to Be3+
• In order to go from Be to Be3+, you must LOSE 3 electrons. This will require 3 ionization steps (see pg 107 in book).
𝐵𝑒 (𝑔 )→𝐵𝑒+ ¿ (𝑔 )+𝑒−¿
𝐵𝑒+¿ (𝑔 )→𝐵𝑒2+¿ (𝑔 ) +𝑒− ¿ ¿
𝐵𝑒2+¿ (𝑔 )→𝐵 𝑒3 +¿ (𝑔 )+𝑒−¿ ¿
𝐼 𝐸1=1.49𝑎𝐽𝐼 𝐸2=2.92𝑎𝐽𝐼 𝐸3=24.7𝑎𝐽
29.1 aJ
Remember, energy is always in Joules (J). atto (a) = 10-18
Example
Be4 electrons
Li3 electrons
Single electron that is easily removed
Pair of tightly bound electrons Pair of
electrons that are more easily removed
• Let’s take a look at the electron configurations of Lithium (atomic # = 3) and Beryllium (atomic # = 4)
Successive Ionizations
Na11 electrons
Ne10 electrons
Same two tightly bound electrons
Eight electrons of similar attraction to the nucleus
11th electron enters different “shell”
Successive Ionizations
Electrons Reside In “Shells” Of Different Distances From The Nucleus
• From these plots, Niels Bohr derived the Bohr model of the atom. In it, electrons reside in shells that orbit at different distances from the nucleus.
• Each shell has a finite number of electrons that it can hold
• The two electrons closest to the nucleus are the hardest to remove.
• Each shell holds 2n2 electrons, where the n=1 shell is the closest to the nucleus.
Na
Same Outer Electron Configuration Along A Group Leads to Similarities in Reactivity
Li
Na
KAll group 1 metals have 1 lone electron in the outermost occupied shell (valence shell). Higher energy shells exist, but are empty!
Chemical properties of an element are determined by the
outer electron configuration.
Periodicity is Due To Repeating Valence Electron Configurations
Li Be B C N O F Ne
Na Al Si P S Cl ArMg
Noble Gas Configurations
• The inner-most electrons of an element comprise what is known as a noble gas core. – At the close of each shell, you have a noble gas
configuration. Noble gases are chemically inactive because they have completely filled shells.
• Lithium, for example, has a two electron core, which we call a Helium core, and one outer, or valence electron. Sodium has a 10-electron, Neon core, and one valence electron; and so on.
• The electron configuration of an element can be represented with a Lewis dot formula
• We use these representations to describe the electron configurations of an element.
Full Lewis dot configuration
Valence Lewis dot configuration