Le Chatelier’s Principle • When a chemical system at equilibrium is disturbed by a stress, the system adjusts (shifts) to oppose the change • Stresses include: • Change in concentration • Change in pressure (or volume) • Change in temperature
Le Chatelier’s Principle
• When a chemical system at equilibrium is disturbed by a stress, the system adjusts (shifts) to oppose the change
• Stresses include:• Change in concentration• Change in pressure (or volume)• Change in temperature
Change in Concentration
• Increasing the concentration of the reactants OR• Decreasing the concentration of the products• Will favour the forward reaction, causing the equilibrium to
shift to the RIGHT
• Decreasing the concentration of the reactants OR• Increasing the concentration of the products• Will favour the reverse reaction, causing the equilibrium to
shift to the LEFT
• RECALL: Addition or removal of solid or liquids does not change the concentration. Therefore does not cause a shift. I.e. only applies to gases and aqueous solutions.
A(g) + 3B(g) 2C(g) + heat
Change in Concentration
N2(g) + 3H2(g) 2NH3
Change in Pressure
• Increasing the volume of the container OR Decreasing the pressure
• Will cause a shift to the side with MORE gas molecules• In our example, it will shift left (4 molreactants > 2 molproducts)
• Decreasing the volume of the container OR Increasing the pressure
• Will cause a shift to the side with LESS gas molecules• In our example, it will shift right (4 molreactants > 2 molproducts)
A(g) + 3B(g) 2C(g) + heat
volume pressure volume pressure
Change in Temperature
In an exothermic reaction:
• Increasing the temperature will cause a shift to the LEFT
• Decreasing the temperature will cause a shift to the RIGHT
Change in Temperature
In an endothermic reaction:
• Increasing the temperature will cause a shift to the RIGHT
• Decreasing the temperature will cause a shift to the LEFT
Change in Temperature
Recall: Keq is temperature dependent. Therefore, changes in temperature will also affect Keq
Shift right = products, Keq
Shift left = reactants, Keq
DEMONSTATION
Variables that do NOT Affect Equilibrium• Catalysts
• Increases reaction rate by lowering activation energy (of BOTH the forward and the reverse reactions equally)
• Decreases the time required to reach equilibrium but does not affect the final position of equilibrium
• Inert Gases• Increases the pressure, which will increase reaction rate• Increases the probability of successful collisions for BOTH
products and reactants equally • Decreases the time required to reach equilibrium but does
not affect the final position of equilibrium
Practice
The Reaction Quotient (Q)• If a chemical system begins with reactants only, it is
obvious that the reaction will shift right (to form products).• However, if BOTH reactants and products are present
initially, how can we tell which direction the reaction will proceed?
• Use a trial value called the reaction quotient, Q• When a reaction is NOT at equilibrium
• Q=Keq the system is at equilibrium• Q > Keq the system shifts towards reactants to reach equilibrium• Q < Keq the system shifts towards products to reach equilibrium
(p. 464) In a container at 450°C, N2 and H2 react to produce NH3. K = 0.064. When the system is analysed, [N2] = 4.0 mol/L, [H2] = 2.0 X 10-2 mol/L, and [NH3] = 2.2 X 10-4 mol/L. Is the system at equilibrium, if not, predict the direction in which the reaction will proceed.
)(3)(2)(2 23 ggg NHHN
3
32
24
3)(2)(2
2)(3
105.1
)100.2)(0.4(
)102.2(
]][[
][
gg
g
HN
NHQ
rightshift willsystem The
064.00015.0
KQ
Practice #1
Practice #2
In a container, carbon monoxide and water vapour are producing carbon dioxide and hydrogen at 900oC.
CO(g) + H2O(g) H2(g) + CO2(g) Keq = 4.00 at 900oC
If the concentrations at one point in the reaction are: [CO(g)] = 4.00 mol/L, [H2O(g)] = 2.00 mol/L, [CO2(g)] = 4.00 mol/L, and [H2(g)] = 2.00 mol/L. Determine whether the reaction has reached equilibrium, and, if not, in which direction it will proceed to establish equilibrium.
Practice #2 Answer
Practice #3Calculating Equilibrium Concentrations from Initial Concentrations
• Carbon monoxide reacts with water vapour to produce carbon dioxide and hydrogen. At 900oC, Keq is 4.200. Calculate the concentrations of all entities at equilibrium if 4.000 mol of each entity are initially place in a 1.00L closed container.
Practice #4Calculating Equilibrium Concentrations Involving a Quadratic Equation
• If 0.50 mol of N2O4 is placed in a 1.0L closed container at 150oC, what will be the concentrations of N2O4 and NO2 at equilibrium? (Keq = 4.50)
Practice #5
Simplifying Assumption: 100 rule (for small K values)
If: [reactant] > 100, you can simplify the Keq expression
K
Ex: 2CO2(g) 2CO(g) + O2 (g)
If K = 6.40 x 10-7, determine the concentrations of all
substances at equilibrium if it starts with [CO2] = 0.250 mol/L
Solubility Equilibrium• Not all ionic compounds are equally soluble• Ionic compounds dissolve into individual ions• This can be a reversible system• Example: CaCl2(s) Ca2+(aq) + 2Cl-(aq)
• Equilibrium can be reached between the solid substance and its dissolved ions (saturation point)• The solution is saturated at equilibrium
• An equilibrium equation can be written for solubility reactions
• Ex: AgCl (s) Ag+ (aq) + Cl- (aq)
Solubility Product Constant (Ksp)
Since AgCl is a solid, the concentration is not changing, so it is “built in” to the K value:
• The new constant is the solubility product constant (Ksp)
Example• Eg: Lead (II) chloride has a molar solubility of 1.62x10-
2mol/L at 25oC. What is the Ksp of this salt?
PbCl2 Pb2+ + 2Cl-
Ksp = [Pb2+][Cl-]2
[Pb2+] = [PbCl2] = 1.62x10-2mol/L
[Cl-] = 2[PbCl2] = 2(1.62x10-2mol/L) = 3.24 x 10-2mol/L
Ksp = [1.62x10-2mol/L][3.24 x 10-2mol/L]2
= 1.7x10-5
Example 2• The Ksp of silver chloride at 25oC is 1.8x10-10. What is the molar
solubility of AgCl?
AgCl Ag+ + Cl-
AgCl Ag+ Cl-
Initial - 0 0
Change - + X + X
Equilibrium - X X
Ksp = [Ag+][Cl-]1.8x10-10 = [X][X]1.8x10-10 = X2
X = 1.34x10-5M
• The size of Ksp depends on the solubility of the salt. • Large Ksp: [ions] at equilibrium is high, salt is very soluble• Small Ksp: [ions] at equilibrium is low, salt has low solubility
• To determine whether a precipitate will form during a reaction, a trial solubility product constant can be determine which is denoted by the symbol Qsp.
Qsp < Ksp : Shifts right to equilibrium – all solid dissolving
Qsp > Ksp : Shifts left to equilibrium – precipitate forms
Qsp = Ksp : Equilibrium (saturated) – no precipitate