Prices in effect from November 25, 2015 through January 31, 2016 – Only while stock lasts. LB-35II-850 Lathe MACHINE IN GOOD CONDITION MANUFACTURE YEAR 2012 INSTALLATION YEAR 2013 FEATURES • 27.56" swing over bed • 18.11" max turn diameter • 33.46" maximum turning length • Super Big Bore (SBB) JIS A2-15 Spindle Nose, ∅ 7.08" Spindle Bore • 40/30 HP VAC spindle motor, 1400 rpm • V12-NC servo-slotted-inch wedge-turret • Hydraulic tailstock – live quill – MT5 – tow along positioning REPLACEMENT COST $340,000 USD SERIAL NUMBER 166500 F.O.B. EDMONTON, AB great DEAL! $229,900 (USD) • Chip Conveyor for right side discharge • Schunk EP 460-185 Air Chuck USED MACHINE LU3000EX-1000 4-AXIS HORIZONTAL LATHE NEW MACHINE COMPLETE WITH NEW WARRANTY, INSTALLATION AND TRAINING! The latest evolution of 4-axis turning in the 8- to 10-inch chuck class. Large work ranges of the turrets mean less interference and more flexibility. OSP control is a highly reliable system and is capable of integration with new generations of software and hardware technology. STANDARD FEATURES • 45° “box bed” with all box way construction • 12-station upper turret and 8-station lower turret offer plenty of tool stations and allow users to perform multiple turning operations either simultaneously or independently. • Swing over bed 22.83" • Max turning diameter Upper/Lower 16.14"/9.84" • Max turning length 39.37" • 30/20 HP VAC spindle drive • 45-5000 rpm, A2-6 spindle nose, 8" chuck • 1181 IPM / 984 IPM; Z / X rapid traverse REGULAR LIST $263,600 USD SPECIAL PRICE APPLIES TO SERIAL NUMBER 5G6.174209 ONLY F.O.B. EDMONTON, AB great DEAL! $209,495 (USD) NEW IN STOCK MACHINE OPTIONAL FEATURES: • Auto Tow Along Tailstock • Conveyor, Side Exit • Static Toolholders GENOS M560-V 3-AXIS VERTICAL MACHINING CENTER STANDARD FEATURES ON BOTH MACHINES REPLACEMENT COST $217,948 USD APPLIES TO SERIAL NUMBER 177891 ONLY F.O.B. EDMONTON, AB great DEAL! $160,755 (USD) REPLACEMENT COST $157,800 USD F.O.B. THOMAS SKINNER WAREHOUSE great DEAL! $143,930 (USD) NEW IN STOCK MACHINE PHOTO FOR ILLUSTRATION ONLY. NOT ACTUAL MACHINE For more information on the machines listed in this flyer please call: 1-800-567-2131 HERE’S 2 DEALS! OPTIONAL FEATURES • Conveyor, Consep 2000II (Mayfran) • Splash Gun • Shower Coolant • Super Nurbs • MP Systems 1000 PSI High Pressure Coolant System …and more options OPTIONAL FEATURES • Lift UP Chip Conveyor • ChipBlaster 500 PSI High Pressure Coolant System • XYZ Travels 41.34"×22.05"×18.11" • Inch T-slot Table 51.18" x 22.05" • 15,000 rpm, 30/25 HP, CAT 40 Big Plus • OSP P300M Control System • High Speed 32-Tool Automatic Tool Changer • 1,575 / 1259 IPM Rapid Feed XY / Z
4
Embed
LB-35II-850 Lathe - Welcome to Thomas Skinner! · 2015-12-01LB-35II-850 Lathe MACHINE IN GOOD CONDITION ... • 40/30 HP VAC spindle motor, ... Vertical Manual Pulse Generator ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Prices in effect from November 25, 2015 through January 31, 2016 – Only while stock lasts.
LB-35II-850 LatheMACHINE IN GOOD CONDITION
MANUFACTURE YEAR 2012 INSTALLATION YEAR 2013
FEATURES• 27.56" swing over bed• 18.11" max turn diameter • 33.46" maximum turning length • Super Big Bore (SBB) JIS A2-15
– tow along positioning REPLACEMENT COST $340,000 USD
SERIAL NUMBER 166500
F.O.B. EDMONTON, AB
great DEAL!
$229,900 (USD)
• Chip Conveyor for right side discharge
• Schunk EP 460-185 Air Chuck
USED MACHINE
LU3000EX-10004-AXIS HORIZONTAL LATHE
NEW MACHINE COMPLETE WITH NEW WARRANTY, INSTALLATION AND TRAINING!
The latest evolution of 4-axis turning in the 8- to 10-inch chuck class. Large work ranges of the turrets mean less interference and more flexibility. OSP control is a highly reliable system and is capable of integration with new generations of software and hardware technology.
STANDARD FEATURES
• 45° “box bed” with all box way construction
• 12-station upper turret and 8-station lower turret offer plenty of tool stations and allow users to perform multiple turning operations either simultaneously or independently.
• Swing over bed 22.83"• Max turning diameter
Upper/Lower 16.14"/9.84"• Max turning length 39.37"• 30/20 HP VAC spindle drive• 45-5000 rpm, A2-6 spindle nose,
8" chuck• 1181 IPM / 984 IPM;
Z / X rapid traverse
REGULAR LIST $263,600 USD
SPECIAL PRICE APPLIES TO
SERIAL NUMBER 5G6.174209 ONLY
F.O.B. EDMONTON, AB
great DEAL!
$209,495 (USD)
NEW IN STOCK MACHINE
OPTIONAL FEATURES:• Auto Tow Along Tailstock• Conveyor, Side Exit • Static Toolholders
GENOS M560-V3-AXIS VERTICAL MACHINING CENTER STANDARD FEATURES ON BOTH MACHINES
REPLACEMENT COST $217,948 USD
APPLIES TO SERIAL NUMBER 177891 ONLY
F.O.B. EDMONTON, AB
great DEAL!
$160,755 (USD)
REPLACEMENT COST $157,800 USD
F.O.B. THOMAS SKINNER WAREHOUSE
great DEAL!
$143,930 (USD)
NEW IN STOCK MACHINE
PHOTO FOR ILLUSTRATION ONLY.
NOT ACTUAL MACHINE
For more information on the machines listed in this flyer please call:
1-800-567-2131
HERE’S 2 DEALS!
OPTIONAL FEATURES • Conveyor, Consep 2000II (Mayfran)• Splash Gun• Shower Coolant• Super Nurbs• MP Systems 1000 PSI High
Pressure Coolant System…and more options
OPTIONAL FEATURES • Lift UP Chip Conveyor• ChipBlaster 500 PSI High
Pressure Coolant System
• XYZ Travels 41.34"×22.05"×18.11"• Inch T-slot Table 51.18" x 22.05" • 15,000 rpm, 30/25 HP,
CAT 40 Big Plus
• OSP P300M Control System • High Speed 32-Tool
Automatic Tool Changer• 1,575 / 1259 IPM
Rapid Feed XY / Z
REGULAR LIST $185,440 USD
SERIAL NUMBER 3096056
F.O.B. CALGARY, AB
*TRAVEL EXPENSES MAY BE EXTRA
great DEAL!
$136,650 (USD)
DS-30SSY Dual-Spindle CNC Lathe w/Y-axis & Haas Bar Feeder
GOOD CONDITION WITH LOW HOURS
FEATURES:• 16" × 23" max capacity• ±2.00" Y-axis travel• Main Spindle: 30 HP vector
drive, A-6 spindle, with optional 3" bar capacity, 10" chuck, 4500 rpm
On time hours: 550:45 Cut time hours: 1115:25MANUFACTURE YEAR 2013 INSTALLATION YEAR 2014
REGULAR LIST $38,485 USD
F.O.B. CALGARY OR EDMONTON
SERIAL NUMBERS 1120329/1121312
great DEAL!
$35,275 (USD)
VF-2 Vertical Machining Centre
GREAT CONDITION WITH LOW HOURS
Mini Mill ECONOMICAL SOLUTION FOR SMALL PARTS MACHINING
FEATURES:• 16" x 12" x 10" travels (x,y,z)• 36" x 12" table• 6,000 RPM vector drive spindle• Accepts 1- or 3-phase power • 10-pocket ATC• 600 IPM rapids• 500 IPM cutting feeds
Gently used by competitors in the Skills Canada Competitions.
2 Mini Mills Available!
For more information on the machines listed in this flyer please call:
1-800-567-2131
CH-400X800HIGH SPEED PRECISION LATHES
MANUFACTURE YEAR 2012 INSTALLATION YEAR 2013
H-10A is an automatic horizontal band saw providing accurate 90° metal cutting for medium to heavy-duty applications.
FEATURES:• Automatic multi-indexing
up to 24" in a single stroke• Split front vise• Blade breakage switch• Out of stock limit switch• 240 Volts, 3-Phase, 60 Hz• 10" x 10" square cap.
The H-230A has the smallest footprint of HYDMECH’s automatic horizontal band saws. Its split front vise for material clamping results in a short remnant length.
FEATURES:• Automatic multi-indexing
up to 19" in a single stroke• Split front vise• Blade breakage switch• Out of stock limit switch• Hydraulically driven chip auger• 240 Volts, 3-Phase, 60 Hz• 9" x 9" square cap• 1" x 9'9" blade sizeF.O.B. CALGARY, AB
SERIAL NUMBER HSC1112360
great DEAL!
$29,995REGULAR PRICE $28,100
F.O.B. RICHMOND, BC
SERIAL NUMBER H09131713G
great DEAL!
$21,995
REGULAR LIST $23,995
SERIAL NUMBER CHI-CH400800TSKILLS
F.O.B. LOCAL THOMAS SKINNER
WAREHOUSE
great DEAL!
$20,495
Gently used by competitors in the Skills Canada Competitions.
FEATURES:
• 16" Swing over bed• 31.5" Distance between centers• 2" Spindle Bore• D1-6 Camlock Spindle• 7.5 HP motor• Taper Turning Attachment• Chucks – 8" 3-Jaw, 10" 4-Jaw (Bison)
• 1-1/4" x 12'6" blade size• 16" blade wheel diameter• 5 HP blade drive
DEMO MACHINE
• Mitutoyo 2-Axis Digital Readout• Multifix Suisse Quick Change
Central Reception: 604-276-2131 or 1-800-567-2131Customer Service / Inside Sales: 604-207-3117 or 1-866-999-3117
Service & Parts: 604-207-3100 or 1-866-779-2131Visit our website: www.thomasskinner.com
PRICES IN EFFECT NOVEMBER 25th 2015 THROUGH JANUARY 31st, 2016 OR WHILE QUANTITIES LAST. All CNC machines are F.O.B. as shown while quantities last. All used and demo machines are sold ‘as is’. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm text, specifications and price with your Customer Service Representative. All products are priced in Canadian dollars unless otherwise stated. All products are F.O.B. Thomas Skinner Branch unless otherwise stated. Prices are in effect until quantities last. NOT RESPONSIBLE FOR ERRORS IN DESCRIPTION OR PRICE.
BO 385LCNC PRECISION AUTOMATIC LATHE SWISSTURN
F.O.B. RICHMOND, BC
SERIAL NUMBER 21133B
great DEAL!
$230,300 (USD)
For more information on the machines
listed in this flyer please call:
1-800-567-2131
FEATURES:
• Tsugami's unique “Double Spindle” enables heavy duty machining and short remnant length.
• Larger machining capability up to Ø38.• Rotary tools can be mounted on the rear tool post.• Wide tooling zone for easy set up
and better chip disposal.• Overlap machining for
high production• Improved simultaneous machining
with Y-axis live tools
FEATURES:
• Arm elevating motor• Hydraulic clamping of column,
arm and drill• Complete coolant system• Vertical arm travel: 27-9/16"• Spindle head longitudinal travel: 35"• Morse taper spindle: 5MT• Motor for main spindle:
5 HP/220V/3-Ph/60 Hz• Column diameter: 13-3/4"
Radial Drills – KMR-1250DHBRAND NEW – DISCONTINUED UNITS