Lathe Materials Catalogue May 2011

M-MACHINEUnit 6, Forge Way, Cleveland Industrial Estate,

Darlington, County Durham, DL1 2PJTel & Fax 01325 381300sales@m-machine. co.uk

Metals For Model EngineersPrice list (VAT inclusive)May 2011

Prices correct at time of printing are not guaranteed for any fixed period

Please contact us by phone 01325 381300 or fax 01325 381300 or e-mail on

[email protected] To place an order or discuss your requirements. We can accept payment by all major credit and debit cards with your telephone order

or you may pay by PayPal or send cheque or postal order.

We are open for counter service weekdays from 0830am to 1700 and often from 0900

to 13:00 on Saturdays (Please phone for a Saturday visit).

Carriage rates

Small orders will be sent by first class post (Weights up to 1.0kg)

Minimum carriage will be 5.50

Weights from 1.0kg to 15kg will be sent by carrier at a cost of 10.00

Carriage charges for the Highlands & Islands, Isle of Man, Channel Islands and Export, quoted at time of order.

Website visit : www.m-machine-metals.co.uk

M-Machine 01325 381300You may benefit by reading the following carefully

Terms of business, Pricing and Delivery.

Payment.

1 Your remittance , or card details, should accompany any order sent by post, Which should include your addressand telephone number.

2 Payment is acceptable by all major credit/debit cards, Cheque (subject to the usual conditions) and postal ordersand PayPal.

3 Cheques and postal orders made payable to M-Machine.

4 We require full card details for Debit/credit card payment (Please ring if unsure)

Goods

1 Though care has been taken in the compiling of this catalogue, No liability can be accepted for any error.

2 On the rare occasions where damage or loss of goods in transit occurs, compensation may be paid after a satisfactory investigation.

3 Idealy, goods for mail order will be a maximum of 750mm in length, but please state if specific lengths abovethis are required, as we can supply lengths up to a maximum of 3metres but with modification of carriage charge.

4 Goods will usually be despached within 10 working days or as soon as complete.

Catalogue Prices

1 Unless otherwise stated, Lengths of material will be supplied plus or minus 2%. Please ensure you ordersufficient to cover your FINISHED length.

2 Most prices are quoted as price per foot/300mm or per Inch/25mm.Please note that you can order the exact amount of material you need but requirments less than one inch/25mmwill carry the 1 inch/25mm price and requirments less than one foot/300mm price band may carry a 0.30psurcharge.e.g. 1-3/4" length of 3" dia EN1A @ 1.45 per inch x 1.75 = 2.45but 3/4"length of 3" dia EN1A @ 1.45 and the total price will remain at 1.45.and 6" length of 1/2" dia EN1A @ 0.70 per foot x 0.5 = 0.35 + 0.03 = 0.65.Similarly the same forula is applied to sheet.e.g.18"x12"x 16swg brass sheet @9.22 per sq foot x 1.5 = 13.83 But12" x 6" x 16 swg brass sheet @ 9.22 per sq foot x 0.5 = 4.61 + 0.30= 4.91.

3 We reserve the right to charge a minimum of 6.00 for goods on very small orders

4 Carriage charges will be applied as follows: Packages up to 1kg (2.2lbs) in weight will be sent by first class post with a minimum charge of5.50, Packages between 1 kgs and 15kgs (22lbs) will be sent by carrierat a cost of 10.00 Consignments weighing more than 15kgs will have approx 35p per extra kg added.Any parcel exceeding 1.5metres in length may subject to special rates.

5 VAT is included in all prices in this catalogue.

2

M-Machine 01325 381300 AluminiumDiameters HE 30 (6082)Price per foot/300mm Price per inch/25mm1/8" 0.60 7/16" 1.87 20mm 3.00 7/8" 0.62 40mm 1.00 2 1/2" 2.22 3 1/2" 4.68 6.5" .3/16" 0.86 12mm 2.27 25mm 0.64 1 5/8" 1.20 2 3/8" 1.98 4" 6.29 7" 15.506mm 1.34 1/2" 2.28 1" 0.64 1 3/4" 1.26 2 5/8" 2.30 4 1/4" 7.20 8" .1/4" 1.34 9/16" 2.34 1 1/8" 0.70 1 7/8" 1.32 2 3/4" 2.52 4 1/2" 8.88 210mm 23.745/16" 1.38 5/8" 2.76 1 1/4" 0.70 2" 1.38 70mm 2.52 5" 10.27 9" .10mm 1.63 16mm 2.15 1 3/8" 0.72 2 1/8" 1.87 3" 2.88 51/2" 11.72 11" .3/8" 1.50 3/4" 2.42 1 1/2" 0.82 2 1/4" 1.92 3 1/4" 3.26 6" 12.52 .

Diameters 6262 Free Machining Diameters 2014 HE15Price per foot/300mPrice per inch/25mm Price per foot/300mm Price per inch/25mm3/8" 2.16 1" 0.60 1 7/8" 1.72 4" 5.94 1/8 . 9/16 . 7/8 . 1-3/4" .1/2" 2.22 1 1/8" 0.67 2" 1.92 3/16 . 5/8" 7.56 1" 1.01 1-7/8" .5/8" 2.76 1 1/4" 0.86 2 1/4" 2.28 1/4 4.03 3/4" 8.40 1-1/8" . 2" .3/4" 5.28 1 3/8" 0.90 2.1/2" 2.77 5/16 . 1-1/4" 1.44 2 1/4" 4.18

1 1/2" 1.01 3" 3.52 3/8 6.53 1-3/8" . 21/2" 4.32. 1 5/8" 1.19 3.1/4" 4.20 7/16 7.32 1-1/2 1.80 31/2" 5.94

1 3/4" 1.54 3.3/4 5.82 1/2 6.60 1-5/8" 2.30

Flats HE30Price Per Foot/300mm Price per inch/25mm

1/16" x 1/2" 0.80 3/16" x 1" 2.40 5/16" x 1" 3.06 1/2" x 2 1/2" 7.20 3/4" x 1 1/2" 0.651/16" x 3/4" 0.80 3/16" x 11/2" . 5/16" x 2" . 1/2" x 3" 8.33 3/4" x 1 3/4" 0.721/16" x 1" 0.80 3/16" x 3" 5.52 3/8" x 1/2" 3.17 1/2" x 31/2" 0.00 3/4" x 2" 0.771/8" x 1/4" 2.04 3/16" x 4" 6.10 3/8" x 3/4" 3.24 1/2" x 4" 12.55 3/4" x 21/2" 1.101/8" x 3/8" 2.06 1/4" x 3/8" 1.54 3/8" x 1" 3.30 1/2" x 5" 13.80 3/4" x 3" 1.141/8" x 1/2" 2.10 1/4" x 1/2" 2.04 3/8" x 11/4" 3.89 1/2" x 6" 14.40 3/4" x 4" 1.461/8" x 5/8" 2.14 1/4" x 5/8" 2.71 3/8" x 1 1/2" 4.25 5/8" x 1" 4.80 3/4" x 6" 2.621/8" x 3/4" 2.16 1/4" x 3/4" 2.72 3/8" x 1 3/4" 4.44 5/8" x 11/2" 6.50 1" x 1 1/4" .1/8" x 1" 2.40 1/4" x 1" 2.74 3/8" x 2 " 5.23 5/8" x 2" 7.20 1" x 1 1/2" 0.723mm x 25mm 2.40 1/4" x 11/4" . 3/8" x 2 1/2" 5.40 5/8" x 21/2" 7.80 1" x 1 3/4" 0.841/8" x 11/4" 2.57 1/4" x 11/2" 2.82 3/8" x 3" 5.81 5/8" x 3" 8.59 1" x 2" 1.011/8" x 1 1/2" 2.58 1/4" x 13/4" 2.88 3/8" x 4" 9.14 5/8" x 4" . 1" x 21/2" 1.103mm x 50mm 2.64 1/4" x 2" 3.84 3/8" x 5" 10.80 5/8" x 6" 18.72 1" x 3" 1.661/8" x 2 " 2.64 1/4" x 21/2" . 3/8" x 6" 13.20 3/4" x 1 " 4.94 1" x 4" 1.801/8" x 2 1/2" 3.50 1/4" x 3" 5.10 3/8" x 200 25.20 3/4" x 11/4 " 5.04 1" x 5" 2.061/8" x 3" 4.25 1/4" x 31/2" 6.71 1/2" x 3/4" 2.93 1 1/4" x 2" 1.131/8" x 4" 5.23 1/4" x 4" 7.56 1/2" x 1" 3.00 1 1/4" x 21/2" 1.273mmx 100mm 5.23 1/4" x 5" 7.80 1/2" x 1 1/4" 4.20 1 1/4" x 3" 1.871/8" x 6" . 1/4" x 6" 8.40 1/2" x 1 1/2" 4.30 1 1/4" x 4" 2.043/16" x 1/2" 1.20 5/16" x 1/2" 2.71 1/2" x 1 3/4" . 1 1/4" x 5" 3.913/16" x 3/4" 1.80 5/16" x 3/4" 2.95 1/2" x 2 " 4.98 1 1/2" x 2" 1.39

1 1/2" x 21/2" 1.701 1/2" x 3" 1.801 1/2" x 4" 2.452" X 3" 2.152" x 2 1/2" 2.782" x 4" 3.863" x 4" 5.88

H15 2014Price per inch/25mm

1/4" x 1/2" 0.60 1" x 1" 1.15 10mmx32mm 1.805/8 X 1 3/4 1.80 1" X 2" 1.68 12mmx 51mm 2.645/8 X 1 1/2 1.68 1" X 21/2" 2.16 15mm x 28mm 1.34 If your requirements are not3/4 X 1 1/2 0.96 1 1/2 x 2 2.40 65mmx400 1.80 listed Please enquire.3/4 X 2 1.08 8mmx51mm 1.30 3" Thick 6.36

1/4 Thick 0.503

M-Machine 01325 381300 AluminiumSquares HE30 H15Price per foot Price per inch/25mm Price per inch/25mm1/4" 0.96 1 1/4" 0.96 4" 6.05 1" sq 1.085/16" 1.32 1 1/2" 1.14 3" sq 6.483/8" 1.44 1 3/4" 1.921/2" 2.40 2" 2.105/8" 3.19 21/4" 2.407/8" 4.44 21/2" 2.523/4" 4.46 2 3/4" 3.221" 5.93 3" 3.74

Equal Angle HE 30 Unequal Angle HE30Price per foot/300mm Price per foot/300mm1/4 x 1/4 x 1/16 2.23 1 1/2" x 1 1/2" x 1/8" 4.37 3/4" x 1/2" x 1/16" 1.201/2" x 1/2" x 1/8" 1.68 1 1/2" x 1 1/2" x 3/16" 5.15 1" x 1/2" x 1/16" 1.633/4" x 3/4" x 1/16" 1.68 38 x 38 x 3mm 4.32 1" x 1/2" x 1/8" 1.663/4" x 3/4" x 1/8" 2.34 2" x 2" x 1/8" 5.29 1" x 3/4" x 1/8" 1.681" x 1" x 1/16" 1.68 2" x 2" x 3/16" 5.40 11/4" x 3/4" x 1/8" 3.1425 x 25 x3 1.80 2" x 2" x 1/4" 7.13 11/2" x 1/2" x 1/8" 2.451" x 1" x 1/8" 1.80 50 x 50 x6mm 5.331"x 1" x 3/16" 2.74 3" x 3" x 1/8" 6.24 2" x 1" x 1/8" 3.361 1/4" x 1 1/4" x 1/8" 3.64 3" x 3" x 1/4" 8.40 2" x 1" x 3/16" 3.841 1/4" x 1 1/4" x 1/4" 5.86 4" x 4" x 1/4" 13.20 2" x 1" x 1/4" 4.801 1/2" x 1 1/2" x 1/16" 4.32

Channel section HE30 Box section HE30price per foot/300mm Price per foot1" x 1/2" x 1/8" 2.11 3/4" x 3/4" x 16swg 4.851" x 3/4" x 1/8" 3.60 1" x 1" x 1/8"(10g) 3.981-1/2" x 3/4" x 1/8" 4.01 2" x 1" x 1/8" 4.561" x 1" x 1/8" 2.93 4" x 2" x 1/4" 15.001-1/4" x 1/2" x 1/8" 3.20 1 sq x16g 3.301-1/4" x 1" x 1/8" 3.60 1 sq x10g 3.602" x 1" x 1/8" 3.96 1-1/2 sq x16g 4.802" x 1-1/2" x 1/8" 4.80 38.10 x38.10 x3.17 4.982" x 2" x 1/8" 5.76 1-1/4 sq x16g 3.702-1/2"" x 1" x 1/8" 3.00 1-1/4 sq x10g 4.372-1/2" x 1-1/2" x 3/16" 4.97 1-1/2 sq x 1/8 " 4.984" x 2" x 3/16" 7.20 1-3/4 x 1 3/4 x 1/8 5.21

We are currently expanding the range of Aluminium sections including 'T' section, Please enquire.Also squares in H15

Hexagons HE30Price per foot3/8" 2.601/2" 3.365/8" 3.60.710" 3.89

More Hexagons availablePlease enquire.

4

M-Machine 01325 381300 AluminiumSheet & Plate Per sq foot/300mm

1050A H150.5mm 2.70 8mm POA 5mm 30.960.8mm 4.14 10swg (3mm) 11.80 6mm 35.521.0mm 5.40 12 swg 9.28 3/8" POA 1/4 Th 60.001.2mm 5.52 14 swg 7.58 10mm POA 1/2Th POA1.5mm 5.64 16 swg 5.40 3/4" Th POA 20mm 3.192.0mm (14swg) 5.76 19 swg 5.54 1/2" Th POA 2" Th POA2.5mm 6.00 20swg (.9mm) 4.20 30mm POA3.mm 7.20 22swg (.9mm) 4.20 2" Th POA4mm 10.80 24swg (.55mm) 3.205mm 17.106mm POA 1/4" Th POA

Treadplate Per Sq Foot/300mm1.5mm 3.602.0mm 5.163.0mm 7.39

Tube H30Price per foot/300mm Price per inch/25mm1/4" OD x 16swg 2.02 1 1/4" OD x 10swg 0.36 2-1/4" OD X 1/8" wall 0.845/16" OD x16swg 2.40 1 1/4" OD x 14swg 0.34 2-1/4" OD X 1/4" wall 1.203/8" OD x 16swg 2.52 1 1/4" OD x 16swg 0.26 52.9 OD x 1.5mm wall 0.603/8" OD x 20swg 2.40 1 3/8" OD x 10swg 0.50 59.2 OD x 1.6 wall 0.777/16" OD x 16swg 2.66 1 3/8" OD x 16swg 0.34 60OD x 3mm wall 0.781/2" OD x 16swg 2.70 1 1/2" OD x 16swg 0.34 2.5" OD X 10swg 0.601/2" OD x 10swg 3.60 40 OD x 1.5mm 0.34 2.5" OD X 1/4" wall 1.135/8" OD x 10swg 2.88 1 1/2" OD x 10swg 0.34 2.5" OD X 3/8" wall 1.615/8" OD x 16swg 2.86 1 1/2" OD x 1/4 wall 0.60 2.5" OD X 1/2" wall 1.183/4" OD x 10swg 2.34 40mm OD x 1.5mm wall POA 2.75" OD X 1/4" wall 1.083/4" OD x 16swg 2.28 1 5/8" OD x 16swg 0.43 3.00" OD X 1/8" wall 0.603/4" OD x 18swg 2.21 1 5/8" OD x 10swg 0.48 3.00" OD X 3/16" wall 1.107/8" OD x 10swg 3.36 1 5/8" OD x 1/4 wall 1.30 3.00" OD X 3/8" wall 1.507/8" OD x 16swg 2.88 1 3/4" OD x 16swg 0.46 3.00" OD X 1/2" wall 3.127/8" OD x 18swg 4.32 1 3/4" OD x 10swg 0.48 3-1/4" OD X 1/2" wall 3.001" OD x 10swg 3.98 1 3/4" OD x 1/4" wall 0.60 3 1/2" OD x 10swg 0.721" OD x 16swg 2.59 2" OD X 16swg wall 0.41 3 1/2" OD x 1/4 wall 1.441" OD x 3/16 3.84 2" OD X 1/4" wall 0.76 4.00" OD X 1/4" wall 2.041-1/8" OD x 10swg 6.00 2" OD X 3/8" wall 1.54 4.00" OD X 3/8" wall POA1-1/8" OD x 16swg 5.76 2" OD X 1/2" wall 3.60 4.1/2" OD X 3/8" wall 2.90

4.1/2" OD X 1/4" wall 2.525.00" OD X 1/4" wall 3.025.00" OD X 1" wall 10.906.00" OD X 10swg 2.40

Conversion Table 6.00" OD X 1/4" wall POASWG INCH MM 6.00" OD X 1/2" wall 6.19

26 0.018 0.45724 0.022 0.55922 0.028 0.71121 0.032 0.81320 0.036 0.91419 0.04 1.016 To convert18 0.048 1.219 mm to inch divide by 25.416 0.064 1.626 mm to feet divide by 304.814 0.08 2.032 mm sq to inch sq divide by 645.1613 0.092 2.35 mm sq to feet sq divide by 92903.0412 0.104 2.642 Inch sq to feet sq divide by 14410 0.128 3.251

5

M-Machine 01325 381300 BrassDiameters CZ121Price per foot/300mm Price per inch/25mm1/16" 1.00 7/16" 4.13 5/8" 0.67 1 5/8" 3.91 5" POA2mm 1.00 12mm 4.68 16mm 0.67 1-3/4" 4.44 5- 1/2" 34.733/32" 1.00 1/2" 4.68 11/16" 0.79 1-7/8" 5.66 6 " D POA3mm 1.00 13mm 4.68 3/4" 0.98 50mm 6.67 7" POA1/8 1.00 9/16" 5.59 18mm 0.83 2" 6.67 71/2 POA9/64 1.03 14mm 7.15 20mm 0.96 2- 1/8" 6.86 8" POA5/32 1.13 15mm 6.60 13/16 1.15 2- 1/4" 7.974mm 1.32 22mm 1.02 2- 3/8" 8.643/16" 1.32 7/8" 1.20 2 -1/2" 9.557/32" 1.40 15/16 1.34 2- 5/8" 9.945mm 1.42 25mm 1.73 2 -3/4" 11.301/4" 1.51 1" 1.73 2- 7/8"6mm 1.68 1 1/16" 1.66 3" D 12.007mm 2.16 1 1/8" 1.90 3- 1/4 " 18.479/32 2.21 1 3/16" 1.92 3- 1/2" 19.205/16" 2.62 30mm 2.40 3- 3/4" 19.928mm 2.90 1 1/4" 2.42 4" 22.9911/32 2.94 1/ 3/8" 2.45 4 -1/4" 25.203/8" 3.46 1 1/2" 3.00 4 -1/2" 26.4010mm 3.29 40mm 3.24 4 -3/4" 39.22

We are also Building stock of CZ114 Mang Bronze and CZ112 Naval Brass's Please enquire.

Squares CZ121Price per foot/300mm Inch/25mm3/32" 1.56 1/4" 2.15 16mm 11.11 1" 2.021/8" 1.32 5/16" 3.12 1/2" 6.96 1 1/8" 2.645/32" 3/8" 4.20 3/4" 15.91 1 1/4" 3.363/16" 1.56 10mm 5.33 7/8" 15.50 1 3/8" 4.205mm 1.80 7/16" 5.33 20mm 14.28 1 1/2" 5.067/32" 9/16" 11.10 1 3/4" 5.766mm 2.18 5/8" 11.42 2 " 7.70

2 1/4" 9.052 1/2" 9.60

Hexagons CZ121 Hexagon Naval Brass CZ121Price per foot/300mm Price per inch/25mm inch/25mm1/8" 1.50 10mm 5.00 11/16" 0.84 1.2" 1 .3" 3.195/32" 4m 1.50 7/16" 5.04 .710" 0.96 1 1/4" 2.88 1.860" 6.603/16" 2.22 1/2" 6.14 3/4" 1.06 1.3" 2.22" 8.76.193" 2.22 0.525" 7.62 13/16" 1.10 1.48 3.84.218"7/3 2.40 9/16" 8.04 0.820" 1.07 1.1/2" 3.846mm 2.40 0.601" 7.08 7/8" 1.24 1.86" 6.721/4" 2.40 5/8" 7.20 .920" POA7mm 15/16 " 1.32.281"9/32" 24mm 1.525/16" 2.50 1 " 1.850.324 3.60 1.100"3/8" 5.04 1 1/8" 2.16

Price Per Inch/25mm We are building stock of 9/16 1.00 1.86" 9.31 Naval Brass CZ121 and1.100" 3.25 2.05" 12.48 Mang Bronze CZ114 Hex1.300" 4.54 2.76" 23.40 If your size requirement is not1.48" 5.86 1 7/16 4.87 Listed Please enquire1.67" 6.60

6

M-Machine 01325 381300 BrassFlats CZ121Price per foot/300mm Price per inch/25mm1/32" x 1/2" 1.36 3/16" x 1/4" 1/4" X 6" 45.96 5/16" x 1" 0.90 1/2" x 6"1/16" x 1/4" 1.36 3/16" x 3/8" 5/16" x 3/8" 5/16" x 1 1/2" 1.34 5/8" x 1" 1.561/16" x 5/16" 1.36 3/16" x 1/2" 3.48 5/16" x 1/2" 4.85 5/16" x 2". 5/8" x 1-1/2" 2.181/16" x 3/8" 2.40 3/16" x 5/8" 4.18 5/16" x 5/8" 3/8" x 1/2" 0.60 5/8" x 2" 2.641/16" x 1/2" 2.64 3/16" x 3/4" 4.62 5/16" x 3/4" 3/8" x 5/8" 0.68 5/8" x 3" 4.501/16" x 5/8" 2.82 3/16" x 1" 6.41 3/8" x 3/4" 0.72 3/4" x 1 " 1.731/16" x 3/4" 3.48 3/16" x 1 1/4" 6.60 3/8" x 1" 0.94 3/4" x 1 1/4" 2.301/16" x 1" 4.15 3/16" x 1 1/2" 9.14 3/8" x 1 1/4" 1.22 3/4" x 1 1/2" 2.521/16" x 2" 3/16" x 2" 11.40 3/8" x 1 1/2" 1.32 3/4" x 2" 3.533/32 x 1/4 3/16" x 21/2" 3/8" x 2" 1.92 3/4" x 3" 5.351/8" x 1/4" 2.28 3/16" x 3" 17.45 3/8" x 2 1/2" 2.09 3/4" x 4" 6.191/8" x 3/8" 2.33 3/16" x 4" 22.44 3/8" x 4" 3.60 1" x 1 1/2" 3.131/8" x 1/2" 2.40 1/4" x 3/8" 3.25 3/8 x 6" 4.93 1" x 1 3/4" 3.911/8" x 5/8" 1/4" x 1/2" 4.20 1/2" x 5/8" 0.82 1" x 2" 4.681/8" x 3/4" 3.68 1/4" x 5/8" 6.10 1/2" x 3/4" 0.84 1" x 2-1/2" 5.041/8" x 1" 3.96 1/4" x 3/4" 6.10 1/2" x 7/8" 1.08 1" x 3" 5.901/8" x 1 1/4" 5.47 1/4" x 1" 6.60 1/2" x 1" 1.14 1 1/4" x 2" 5.881/8" x 1 1/2" 6.36 1/4" x 11/4" 9.00 1/2" x 1 1/4" 1 1/2" x 2" 6.231/8" x 1 3/4" 7.10 1/4" x 1 1/2" 9.79 1/2" x 1 1/2" 1.92 1 1/2" x 3" 7.201/8" x 2" 7.25 1/4" x 1 3/4" 1/2" x 1 3/4"1/8" x 2 1/2" 8.52 1/4" X 2" 15.38 1/2" x 2"1/8" x 3" 11.40 1/4" X 3" 21.17 1/2" x 2 1/2" 2.881/8" x 4" 1/4" X 5" 40.80 1/2" x 3" 3.22

Angles Equal CZ121Price per foot/300mm1/4" x 1/4" x 1/16" 2.45 5/8" x 5/8" x 1/8" 4.80 1" x 1" x 1/4" 14.405/16" x 5/16" x 1/16" 4.25 3/4" x 3/4" x 1/16" 4.80 1 1/4" x 1 1/4" x 1/8" 9.193/8" x 3/8" x 1/16" 4.32 3/4" x 3/4" x 1/8" 4.99 1 1/2" x 1 1/2" x 1/4" 12.671/2" x 1/2" x 1/16" 4.68 1" x 1" x 1/16" 4.75 2" x 2" x 1/8" 14.061/2" x 1/2" x 1/8" 5.40 1" x 1" x 1/8" 5.04 2" x 2" x 3/16" 18.965/8" x 5/8" x 1/16 4.74 1" x 1" x 3/16" 9.00

Angles Unequal CZ121Price per foot1 1/4" x 3/4" x 1/8" 4.621 1/2" x 3/4" x 1/8" 4.74

We are currently expanding our range of Angles,Channels and 'T' sections, Please enquire.

Tees CZ121 Channels CZ121 Half Round CZ121Price per inch/25mm Price per inch/25mm Price per foot/300mm3/8" x 3/8" x 1/16" 0.43 3/8" x 3/8" x 1/16" 0.74 1/8" 2.821/2" x 1/2" x 1/16" 0.48 1/2" x 1/2" x 1/16" 0.84 1/4" 3.671/2" x 1/2" x 1/8" 0.61 3/4 x 3/4 x 1/8 1.62 3/8" 4.803/4" x 3/4" x 1/8" 0.72 1/2" 5.743/4" x 3/4" x 1/16" 0.61 3/4" x 3/16 5.88

1"X 3/16 6.00

7

M-Machine 01325 381300 BrassShim Conversion TablePer 1/2 SQ Foot SWG INCH MM0.001" Th 3.84 26 0.018 0.4570.0015" Th 4.51 24 0.022 0.5590.002" Th 4.80 22 0.028 0.7110.003" Th 6.00 21 0.032 0.8130.004" Th 7.90 20 0.036 0.9140.005" Th 9.86 19 0.04 1.0160.006" Th 9.96 18 0.048 1.2190.008" Th 10.80 16 0.064 1.6260.010" Th 11.88 14 0.08 2.0320.015" Th 14.35 13 0.092 2.350.020" Th 15.55 12 0.104 2.642

10 0.128 3.251

Sheet Price per sq foot/300mmsq

CZ108 CZ1200.4mm 7.2027swg 7.2026swg 7.2025swg 7.2024swg (.55mm) 8.71 We can also supply Heavier Brass plate in22swg( 0.7mm) 9.60 9.84 CZ121, 120 ,112 Naval. Please enquire.21swg(0.8mm) 11.7120 swg(.9mm) 11.71 11.2219 swg 12.9618 swg (1.2mm) 14.88 20.621.5mm 22.51 21.36 To convert1.6mm 22.51 mm to inch divide by 25.416swg 22.51 20.88 mm to feet divide by 304.814swg 23.88 35.28 mm sq to inch sq divide by 645.1613swg (2.3mm) 26.40 mm sq to feet sq divide by 92903.042.5mm 32.59 Inch sq to feet sq divide by 14412swg (2.64mm) 31.20 36.003mm 44.69 45.9110 swg 36.914mm 74.888mm 120.00

Boiler Band WirePrice Per foot/300mm 10fts/3mts1/8" x 22swg 0.37 26swg 3.535/32" x 22swg 0.54 24swg 3.603/16" x 22swg 0.65 20swg 4.261/4" x 22swg 0.78 18swg 4.665/16" x 22swg 0.98 16swg 5.813/8" x 22swg 1.68 14swg 7.441/2" x 22swg 2.88 2mm 7.445/8" x 22swg 3.073/4" x 22swg 3.601" x 22swg 3.30

8

M-Machine 01325 381300

BrassBrass Round TubePrice per foot/300mm Per Inch/25mm1/16" OD x 26swg 1.50 3/8" OD x 22swg 3.36 1" OD x 3/16" W 0.843/32" OD x 24swg 3.17 3/8" OD x 18swg 3.68 1" OD x 1/4" W 0.861/8" x 22swg 1.78 3/8" OD x 16swg 3.96 1 1/8" OD x 16swg 1.201/8" x 24swg 1.74 7/16" OD x 16swg 3.80 1 1/4" x 1/4 wall 2.645/32" OD x 22swg 1.70 7/16" OD x 18swg 3.58 1 1/4" x 10swg 1.345/32" OD x 24swg 1.80 7/16" OD x 20swg 2.72 1 1/4" x 20swg 0.895/32" OD x 28swg 1.78 1/2" OD x 18swg 5.21 1 1/4" x 16swg 1.783/16" OD x 16swg 2.33 1/2" OD x 20swg 4.91 1 3/8" OD x 16swg POA3/16" OD x 20swg 2.16 1/2" OD x 16swg 6.05 1 1/2" OD x 10swg 1.623/16" OD x 22swg 2.04 1/2" OD x 26swg 3.80 1 1/2" x 16swg 1.563/16" OD x 28swg 2.04 9/16" OD x 20swg 4.08 1 1/2" x 20swg 0.907/32" OD x 20swg 2.09 9/16" OD x 16swg 5.94 1 1/2" x 1/4 wall 3.241/4" OD x 16swg 2.70 5/8" OD x 16swg 4.14 1 5/8" OD x 10swg POA1/4" OD x 24swg 2.45 5/8" OD x 18swg 4.20 1 5/8" OD x 16swg 1.421/4" OD x 22swg 2.45 5/8" OD x 20swg 4.20 1 3/4" OD x 16swg 1.501/4" OD x 20swg 2.45 3/4"OD x 26swg 6.26 1 3/4" OD x 10swg 2.111/4" OD x 18swg 2.58 3/4" OD x 20swg 5.39 2" OD x 1/4 3.36

3/4" OD x 16swg 9.60 2" OD x 3/16 3.589/32" OD x 26swg 3.07 3/4" OD x 18swg 5.94 2" OD x 10swg 2.695/16" OD x 16swg 2.88 3/4" OD x 10swg 9.55 2" OD x 16swg 1.805/16" OD x 18swg 3.65 7/8" OD x 22swg 5.70 2" OD x 20swg 1.015/16" OD x 22swg 2.51 7/8" OD x 18swg 7.37 2 1/4" OD x 16swg 1.805/16" OD x 24swg 2.57 7/8" OD x 16swg 8.34 2 1/2" OD x 16swg 4.505/16" OD x 20swg 2.59 1" OD x 22swg 6.24 2 1/2" OD x 10swg 7.103/8" OD x 26swg 3.24 1" OD x 20swg 6.23 3" OD x 16swg 1.783/8" OD x 20swg 3.36 1" OD x 18swg 7.86 3 1/2" OD x 16swg 3.07

1" OD x 16swg 11.40 4" OD x 16swg 3.431" OD x 10swg 10.92

Brass Square TubePrice per foot/300mm Per Inch/25mm1/4 x 1/4 22swg 6.60 1 1/4" x 1 1/4" 1.145/16 x 5/16 22swg 7.51 1 1/2" x 1 1/2" 1.803/8 x 3/8 x18 swg 3.68 2" x 2" Hol 2.047/16x 7/16 4.881/2" x 1/2" x 16swg 9.293/4" x 3/4" x 16swg 10.371" x 1"x 16swg 9.24

If your size is not listed Please enquire

9

M-Machine 01325 381300

Cast IronCast Iron rounds GR17Price per inch/25mm25mm D 0.72 65mm D 2.04 105mm D 6.50 160mm D 13.7530mm D 0.89 70 mm D 2.38 110mm D 7.20 170mm D 16.5435mm D 0.94 75mm D 2.40 115mm D 7.56 180mm D 20.4540mm D 1.08 80mm D 3.67 120mm D 8.88 190mm D 18.0045mm D 1.27 85mm D 3.67 125mm D 9.24 200mm D 18.6050mm D 1.68 90mm D 3.72 130mm D 9.72 210mm D 28.8055mm D 1.80 95mm D 5.28 140mm D 10.20 250 mm D60mm D 1.92 100mm D 5.38 150mm D 10.80 300 mm D

Cast Iron Rounds SG (GGG40)Price per Inch/25mm30mm D 2.28 70mm D 4.8035mm D 2.28 80mm D 7.2040mm D 2.27 95mm D 7.6250mm D 2.94 110mm 11.3560mm D 3.48 115mm 11.4065mm D 3.65 120mm D 11.40

125mm D 12.60240 mm D POA

Cast Iron Squares GR17Price per Inch/25mm1" Sq 1.24 100mm Sq 8.0630mm sq 1.49 110mm Sq 9.0040mm sq 1.80 120mm sq 10.8550mm Sq 2.64 130mm sq 11.1660mm Sq 3.48 140mm sq 11.5265mm sq 4.44 150mm sq 12.6070mm Sq 4.56 160mm sq 14.4075mm sq 5.16 200mm sq80mm Sq 5.3890mm Sq 6.35

Please note. we can cut squares and rectangles to your requirements a small cutting charge will apply. Please enquire.

10

M-Machine 01325 381300 CopperCopper Rounds C101

Price per foot/300mm Price per inch/25mm5/32" 1.80 5/8" D 10.34 1" D 2.451/8" D 1.80 3/4" D 12.66 1 3/4" D 6.073/16" D 2.28 7/8" D 21.24 2" D 8.141/4" D 3.79 2 3/4" D 14.665/16" D 3.98 4" D 25.543/8" D 4.781/2" D 7.084mm D 2.40 40mm D 6.965mm D 2.526mm D 2.588mm D 4.0410mm D 4.8612mm D 6.10

Copper Tube C106Price per foot/300mm Price per inch/25mm1/16" OD x 26swg 1.08 5/8" OD x 18swg 7.08 1 3/8" x 10swg 1.903/32" OD x 24swg 1.20 5/8" OD x 16swg 6.72 1 3/8" x 16swg 0.941/8" OD x 27swg 1.54 3/4" OD x 10swg 8.11 1 1/2" OD x 20swg 0.851/8" OD x 26swg 1.54 3/4" OD x 14swg POA 1 1/2" OD x 16swg 1.041/8" OD x 24swg 1.54 3/4" OD x 16swg 9.00 1 1/2" OD x 10swg 1.43

1/8" OD x 22swg 1.54 3/4" OD x 18swg 8.40 1 5/8" OD x 16swg 1.091/8" OD x 20swg 1.55 3/4" OD X 20swg 5.40 42mm ODx 9swg 3.605/32" OD x 26swg 1.00 7/8" OD x 20swg 5.70 1 3/4" OD x 20swg POA5/32" OD x 24swg 1.13 7/8" OD x 18swg 6.05 1 3/4" OD x 16swg 1.485/32" OD x 22swg 1.13 7/8" OD x 16swg 6.25 1 3/4" OD x 10swg 2.363/16" OD x 26swg 1.30 7/8" OD x 17/32 ID 19.20 2" OD x 20swg 1.253/16" OD x 24swg 1.70 1" OD x 10swg 14.76 2" OD x 16swg 1.323/16" OD x 20swg 3.07 25mm OD x 16swg 8.83 2" OD x 10swg 2.863/16" OD x 22swg 2.52 1" OD x 16swg 9.24 2 1/4" OD 16swg 3.433/16" OD x 16swg 2.27 1" OD x 18swg 8.40 2 1/4" OD 10swg 4.637/32" OD x 20swg 1.70 1" OD x 20swg 6.60 2 1/2" x 20swg 1.497/32" OD x 24swg 1.67 1 1/8" OD x 16swg 12.05 2 1/2" x 16swg 2.451/4 OD x 22swg 2.40 1 1/8" OD x 20swg 10.44 2 1/2" x 10swg 3.141/4" OD X 20swg 2.69 1 1/4" OD x 10swg 1.50 2 3/4" OD x 16swg 1.801/4" OD x 18swg 2.96 1 1/4" OD x 16swg 14.10 3" OD X 16swg 2.241/4" OD x 16swg 3.00 1 1/4" OD x 20swg 7.96 3 1/4" x 16swg 2.525/16" OD x 22swg 3.46 3 1/2" x 16swg 2.935/16" OD x 18swg 3.17 3 1/2" x 10swg 5.205/16" OD x 16swg 3.60 3 3/4" x 13swg 3.475/16" OD x 20 3.46 4" x 10swg 4.683/8" OD x 22swg 4.08 4" x 16swg 5.283/8" OD x 20swg 4.00 4 1/4"OD x 10swg 6.123/8" OD x 18swg 4.08 4 1/2"OD x 10swg 6.603/8" OD x 16swg 3.48 4 1/2"OD x 13swg 6.007/16" OD x 22swg 6.86 5" OD x 13swg 7.447/16" OD x 20swg 3.58 5" OD x 10swg 7.807/16" OD x 18swg 3.48 5-1/4"OD x 10swg 8.817/16" OD x 16swg 4.32 5-1/2"OD x 10swg 9.001/2" OD x 20swg 5.21 6" OD x 10swg 9.121/2" OD x 18swg 5.04 6-1/4" OD x 10swg 9.241/2"OD x 16swg 4.92 6-1/2" OD x 10swg 8.369/16" OD x 18swg 5.30 6-3/4" OD x 10swg 9.799/16" OD x 16swg 7.08 7" OD x 8swg 12.005/8" OD x 20swg 4.34 8-1/4" OD x 10swg 13.30

11

M-Machine 01325 381300 CopperSquares C101 Flats C101Price per foot/300mm Price per foot/300mm3/16" Sq 2.92 1/8 x 1/2 3.06 3/16" x 5/16" 4.276mm Sq 5.71 1/8 x 3/4 3.54 3/16" x 3/4" 5.981/4" Sq 3.84 1/8 x 1 1/4" 5.59 3/8" x 1/2" 7.323/8" Sq 5.90 1/8 x 2" 8.18 3/8" x 3/4" 10.681/2" Sq 8.40 3/16 x 3/4" 5.70 3/8" x 2" 32.885/8" Sq 1.10 3/16 x 1" 7.20 1/2" x 1" 18.483/4" Sq 1.68 1/4" x 3/8" 3.83 10mm x 15mm 7.92

1/4" x 1/2" 3.77 1/2" x 21/2" 41.161/4" x 1" 6.52

Sheet & Plate C106 Deoxidized Foil/ShimPrice per sq foot/300mm SQ 1/2 SQ foot24swg 13.33 1.5mm 23.04 0.003" 4.8022swg ( 0.7mm) 14.34 2mm Th 25.33 0.005" 6.2821swg ( 0.8mm) 15.78 2.5mm 31.26 0.010" 10.7420swg 16.86 3mm 39.60 30swg( .0124) 8.0019swg 17.39 4mm 49.98 0.015" 9.0018swg 17.94 5mm 75.7216swg 23.0414swg/2mm 25.3313swg 29.4010swg 48.963/16" 57.601/4" 80.645/16" 89.28

Nickel SilverRounds FlatsPrice per foot/300mm Price per foot/300mm3/32 D 1.01 3/8" D 6.26 1/16" x 1/4" 1.982mmD 1.01 7/16" D 7.20 1/4" x 1/8" 3.961/8" D 1.80 12mm 10.18 1/8" x 1/8" 2.145/32 D 2.34 1/2" D 10.20 3/16" x 3/16" 3.243/16" D 2.88 9/16" D 22.761/4" D 3.84 5/8" D 23.635/16" D 4.68 3/4" D 27.00

1" D 36.00

Sheetper 1/2 Sq foot To convert Conversion Table30swg 7.20 mm to inch divide by 25.4 SWG INCH MM24swg 9.58 mm to feet divide by 304.8 26 0.018 0.45722swg 11.88 mm sq to inch sq divide by 645.16 24 0.022 0.55920swg 15.00 mm sq to feet sq divide by 92903.04 22 0.028 0.7111mm 18.42 Inch sq to feet sq divide by 144 21 0.032 0.81318swg 20.24 20 0.036 0.91416swg 23.78 19 0.04 1.01614swg 27.60 18 0.048 1.219

16 0.064 1.62614 0.08 2.03213 0.092 2.3512 0.104 2.64210 0.128 3.251

12

M-Machine 01325 381300 Phos BronzeRounds PB102Per Foot/300mm Per Inch/25mm1/8" D 1.80 5/8" 1.27 2" 11.76 Also available is a limited5/32" 3.00 3/4" D 1.70 2 1/8" 12.60 range of metric sizes. POA

3/16" D 4.80 7/8" D 2.34 2 1/4" 10.807/32" POA 1" 2.40 2 1/2" 14.391/4" D 6.00 1 1/8" 2.95 2 3/4" 15.67

5/16" D 6.60 1 3/8 9.85 3" 22.203/8" D 7.80 1 1/4" D 4.44 3 1/4" 40.0210mm 8.88 1 1/2" 5.72 3 1/2" 26.94

7/16" D 9.08 1.5/8 9.82 4" 32.631/2" D 11.27 1 3/4" 9.22 5" 69.60

6" 114.00

Hexagons PB102Price per Inch/25mm1/8" AF 7/16"AF 1.08 7/8" AF 2.76 1.670" AF 11.813/16" AF 0.50 1/2" AF 1.50 0.92 AF 3.19 1.860" AF 15.191/4" AF 0.60 0.525 AF 1.50 1" AF 3.96 2.050" AF 20.037mm AF 0.82 5/8" AF 1.56 1.1" AF 5.40 2.22" AF 21.005/16" AF 0.84 7/8" /.875 2.14 1.2" AF 5.82 10mm AF 1.08.324 AF 0.86 3/4" AF 2.28 1.3" AF 8.163/8" AF 0.96 0.82 AF 2.64 1.480" AF 10.92

Squares PB102 Sheet PB102Per Inch/25mm Per 1/2 sq foot/150mmsq Per SQ inch/25mmsq1/4" SQ 0.95 20swg 13.80 1/4" TH 1.681/2" Sq 1.38 16swg 23.16 5/16" TH 1.745/8" 2.27 14swg 31.58 3/8" TH 1.883/4" 2.94 10swg 42.00 1/2" TH 2.041" SQ 4.25 3/16" TH 64.931 1/4" 8.881 1/2" 10.081 3/4" 12.612" 15.60

Shim PB102 Hard Strip PB102 WirePer 1/2 sq ft/150mmsq Per Foot/300mm Per 10 Foot

0.006 9.66 1/2" x 16swg 3.30 2mm 18.600.010. 16.75 3/4" x 16swg 4.97 14G 6.950.024 19.99 1/2" x 18swg 3.20 16swg 9.78

5/8 x 14swg 4.43 20swg 5.4821swg 5.6024swg 5.4826swg 3.92

If Your size is not shown Squares,sheet,shim and hard strip Please enquire.

13

M-Machine 01325 381300 Phos Bronze

Rounds PB1Per Inch/25mm1/2" D 1.06 3" 24.345/8" D 1.26 3 1/4" 26.4017mm D 1.39 3 1/2" 30.007/8" D 2.54 3 3/4" 23.743/4" D 2.64 4" 28.781" D 2.88 4 1/2" 35.7611/8" D 3.70 5" 79.181 1/4" D 5.14 5 1/2" 45.401 1/2" 6.96 6" 52.251 3/4" 8.50 6 1/2" 101.762" D 12.84 7" 151.202 1/4" 13.27 8" 153.602 1/2" 14.30 12" POA2 3/4" 18.84

Cont Cast PB1 HollowPer Inch/25mm1 x 1/2" POA 2-1/2x 2" POA 4"x 2" POA 8"x 6" POA1 x 3/4" POA 2 3/4 x 1" POA 4"x 2 1/2" POA1" POA 2-3/4"x 1 1/4" POA 4"x 3" POA1 1/4 x 1/2" POA 2 3/4 x 1 1/2" 18.00 4 1/2 x 2" POA1-1/4x 3/4" POA 2 3/4"x 1 3/4" 10.22 4-1/2"x 2 1/2" POA1 1/2 x 1/2" 5.64 2-3/4"x 2" POA 4-1/2"x 3" POA1 1/2" x 3/4" POA 3 x 1" POA 4 1/2 x 3 1/2" 20.781-1/2"x 1" 6.34 3 x 1 1/4" POA 5 x 2" POA1 3/4 x 1" POA 3" x 1 1/2" 11.84 5"x 2 1/2" POA1 3/4 x 1 1/4" 6.96 3"x 2" POA 5"x 3" 39.262 x 1/2" POA 3"x 2 1/4" POA 5"x 3 1/2" POA2 x 3/4" POA 3"x 2 1/2" 8.04 5"x 4" POA2 x 1" 9.46 3 1/4 x 1 1/2" POA 5 1/2 x 3" POA2 x 1 1/4" POA 3-1/4"x 2" POA 5-1/2"x 3 1/2" POA2 x 1 1/2" POA 3 1/4" x 2 1/2" POA 5-1/2"x 4" POA2 1/4 x 1" POA 3 1/2 x 1 1/2" 22.56 6 x 2" POA2 1/4"x 1 1/4" 8.88 3-1/2"x 2" POA 6"x 3" POA2 1/4 x 1 1/2" 8.40 3-1/2"x 2 1/4" POA 6"x 3 1/2" POA2-1/4"x 1 3/4" POA 3-1/2"x 2 1/2" POA 6"x 4" POA2 1/2 x 1" POA 3 3/4 x 2" POA 6" x 4 1/2" POA2-1/2"x 1 1/4" POA 3-3/4"x 2 1/2" POA 7" x 4" POA2 1/2 x 1 1/2" 11.11 4 x 1" POA 7"x 5" POA2 1/2 x 1 3/4" POA 4"x 1 1/2" POA 8 x 5" POA

We can cut squares, rectangles etc. from Large diameters to customers requirements Please enquire.

14

M-Machine 01325 381300 Colphos 90Colphos could be described as a Lead Bearing free machining PB102also be sold by the Inch on request

Rounds HexagonsPer foot/300mm Per Foot/300mm

1/8 D 7/16 D 9.19 5/32" AF5/32" D 3.14 1/2" D 11.14 1/4" AF3/16" D 3.24 9/16 D 1.25 0.324 AF1/4" D 3.58 5/8 D 1.51 10mm 8.375/16 D 5.46 3/4" D 2.21 0.413 AF 13.803/8 D 7.44 1" D 7/16 AF 13.44

13mm 15.480.601 20.28

We are Currently expanding our range of ColphosIf your size is not listed please enquire.

15

M-Machine 01325 381300 Leaded Gunmetal

Gunmetal Rounds LG2Per Inch/25mm1/2" D 1.01 3" D 19.99 8"5/8" D 1.20 86mm 21.23 9"3/4" D 1.66 3 1/4" 21.23 9"7/8" 1.76 3 1/2" 22.46 9" POA1" 2.52 3 3/4" 26.47 10" POA1 1/8" 3.29 4" 0.00 11" POA1 1/4" 3.68 4 1/4" 21.16 12" POA1 3/8" 4.08 4 1/2" 23.051 1/2" D 4.44 4 3/4" 28.791 5/8" 6.18 5" 48.791 3/4" 7.92 5 1/2" 0.002" D 9.94 6" 0.002 1/4" 10.97 6 1/2" 0.002 1/2" 12.00 7" 0.002 3/4" 18.24 7 1/2" 0.00

Gunmetal Hollows LG2Price per inch/25mm1" OD x 1/2" ID 2.34 3x 1 1/2" 15.58 5"x 4"ID 18.911 x 3/4" 1.98 x 2" POA 5 1/2 x 3" POA1 1/4 OD x 1/2"ID 3.48 x 2 1/4" POA x 3 1/2" POA1 1/4"OD x 3/4"ID 3.17 x 2 1/2" POA x 4" POA1 1/4"OD x 1" 2.76 3 1/4 x 1 1/2" POA 6 x 2" POA1 1/2" OD x 1/2" 4.44 3"x 2" 8.68 x 3" POA1 1/2" x 3/4" 4.32 x 2 1/4" POA x 3 1/2" POA1 1/2"OD x 1" 3.00 3 1/4"x 2 1/2" 9.67 x 4" POA1 3/4 x 1" 5.16 3 1/4"x 2 3/4" POA 6 x 4 1/2" POA1 3/4x 1 1/4" 4.26 3 1/2 x 1 1/2" POA 6" x 5" 32.401 3/4 x 1 1/2" 3.83 x 2" 15.17 6 1/2 x 4" POA2 x 1/2" 6.84 x 2 1/4" POA x 5" POA2 x 3/4" 4.51 3 1/2"x 2 1/2" 10.80 7 x 3" POA2" OD x 1" ID 5.71 3 3/4 x 2" POA x 4" POA2" OD x 1 1/4" ID 6.48 95mmOD x 65ID 13.66 x 5" POA2" OD x 1 1/2" ID 4.61 3 3/4 x 2 1/2" 15.60 x 6" POA2" OD x 1 3/4" ID 3.24 3 3/4 x 3" POA 192OD x 98ID 62.402 1/4 OD x 1" ID 4.27 4" OD x 1" ID 29.78 8 x 4" POA2 1/4" OD x 1 1/4" ID 7.49 x 1 1/2" POA x 5" POA2 1/4" OD x 1 1/2" ID 6.34 4" x 2" 27.94 8" OD x 6" IDx 1 3/4" POA 4"x 2 1/2" POA 9 x 4" POA2 1/2 x 1" POA 4x 3" 17.40 x 5" POAx 1 1/4" POA 4x 3 1/4" POA x 6" POA2 1/2" x 1 1/2" 7.68 41/4 x 2 1/4"ID 18.88 x 7" POA2 1/2 x 1 3/4" POA 4 1/2 x 2" POA 10 x 5" POA2 1/2 x 2" 41/2x 1 1/2" 33.53 x 6" POA2 3/4 x 1" POA 41/2 x 2 1/2" POA x 7" POAx 1 1/4" POA 41/2x 3" 25.97 x 8" POA2 3/4 x 1 1/2" POA x 3 1/2" POA 11 x 8" POA2.3/4 x 1 3/4" 5 x 2" 39.91 12 x 6" POAx 2" POA x 2 1/2" POA x 8" POA3 x 1" x 3" POA x 9" POA3 x 1 1/4" POA x 3 1/2" POA

16

M-Machine 01325 381300 Plastics.Nylon 66.Per ft/300mm Per inch/25mm6mm D 0.78 16mm D 0.30 45mm D 1.588mm D 0.96 20mm D 0.46 50mm D 2.2810mm D 1.34 20mm D 0.46 60mm D 3.1912mm D 1.49 25mm D 0.58 65mm D 3.24

25mm D 0.58 75mm D 3.6030mm D 0.60 80mm D 4.3432mm D 0.65 95mm D 5.5036mm D 0.84 100mm D 5.7040mm D 1.20 130mm D 12.23

Nylon 66 Available in Natural or Black

DelrinPer foot/300mm8 mm D 1.44 40 mm D 21.6010 mm D 1.70 40 mm D 21.60 Nylatron Diameters Also available15 mm D 3.19 50 mm D 31.6820 mm D 7.68 60mm D 42.2425 mm D 10.32

Please Note. We can supply By the inch.

TufnolPer Inch/25mm6mm D 0.488mm D 0.67 Tufnol Kite Whale sheet and strip is also available.10mm D 1.13 Please enquire.15mm D 1.8016mm D20mm D 2.7625mm D 2.8235mm D 4.22

PTFE Diameters Acetal DiametersPer ft/300mm PerInch Per ft/300mm Per inch/25mm6mm D 1.30 30mm D 2.02 10mm D 1.50 20mm D 0.618mm D 2.23 35mm D 2.81 12mm D 1.82 25mm D 0.7710mmD 2.64 50mm D 4.90 12mm D 1.82 30mm D 0.8612mmD 3.96 65mm D 7.85 15mm D 2.83 32mm D 1.0015mmD 5.5920mm D 10.8025mm D 12.48

We also stock Nylon , Perspex,Polycarbonate and Acetal sheet. Please enquire.

We are also building stocks of Acrylic Tubes

Whatever your requirement, Please enquire.

17

M-Machine 01325 381300 Stainless Steel.Imperial Diameters 303 Metric Diameters 303 Diameters 304Per foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm1/16" 1.10 7/8" 0.86 2mm 0.84 20mm 0.62 2mm 0.86 3/4" D 0.623/32" 1.10 1" 1.10 3mm 1.08 25mm 0.84 3/16" 1.61 1" D 1.151/8" 1.10 1-1/8" 1.54 4mm 1.14 30mm 1.58 5 mm D 1.68 35mm 2.215/32" 1.56 1-1/4" 2.00 5mm 1.32 35mm 1.63 6 mm D 1.80 50mm 2.933/16" 1.80 1-1/2" 2.64 6mm 1.45 45mm 3.46 1/4" D 1.947/32" 2.52 1- 3/4" 3.36 7mm 2.16 50mm 4.44 7mm D 2.101/4" 2.64 2" 4.46 8mm 2.34 3/8" D 2.649/32" 2.82 2-1/4" 5.83 10mm 3.00 12mm 3.125/16" 2.34 2-1/2" 6.48 12mm 3.12 1/2" D 3.413/8" 2.52 3" 9.00 14mm 4.20 14mm 4.017/16" 2.88 3-1/4" 10.50 15mm 4.56 5/8" D 4.031/2" 3.38 3-1/2" 12.00 16mm 5.82 17 mm D 7.309/16" 4.70 4" 16.03 17mm 6.26 7/8" D 8.865/8" 5.28 4-1/4" 16.43 18mm 6.3011/16" 6.22 5" 24.20 19mm3/4" 7.80

Diameters 316 Diameters 416 (EN56) MagneticPer foot/300mm Per Inch/25mm Per foot/300mm Per inch/25mm1/16" 3/4" 1.03 2-1/2" 1/4" 3.10 1" 1.221/8" 1.28 20mm 1.06 2- 5/8" 5/16" 0.00 1 1/8" 1.563mm 1.20 22mm 1.63 2 -3/4" 3/8" 3.54 1 1/4" 2.065/32" 1.20 24mm 1.80 3" 12.60 5/8" 6.005mm 1.44 7/8" 1.62 5 -1/2" 3/4" 8.21 1 1/2" 2.106mm 2.28 1" 1.92 7- 1/2" 7/8" 11.141/4" 2.33 1 1/8" 3/16" 1.32 35mm 8mm 1 3/8" 3.245/16" 3.72 1 1/4" 2.28 We also stock a range of 410,420,431 (EN57)3/8" 3.42 1 7/8" Please enquire.10mm 40mm 4.5112mm 5.94 50mm 1/2" 6.30 2" 4.509/16" 6.65 21/8" 7.80

Grades Of Stainless Steels.None Magnetic (Austenitic)

C Cr Ni Mn Other

303 0.12 18 9 2304 0.07 18 9.5 2310 0.15 25 20.5 2316 0.07 17 12.5 2 2.8 Mo321 0.08 18 10.5 2Ferritic403 0.08 13 0.5 1430 0.08 17 0.5 1Magnetic (Martensitic)410 0.12 12.5 1 1

EN56 416 0.12 12.5 1 1.5420 0.24 13 1 1

EN57 431 0.16 16.5 2.5 1

18

M-Machine 01325 381300 Stainless Steel.

Hexagons 303 Hexagons 316Per foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm0.156" 3.12 0.601" AF 11.57 3/4" AF 1.39 8mm 6.36 0.71 1.490.193" 1.86 0.710" AF 12.60 .820" AF 1.54 10mm 7.20 0.82 2.090.218 / 7/32" 1.76 5/8" AF 7.63 7/8" AF 1.08 7/16" 8.21 0.92 2.280.282 / 7mm 4.31 11/16" AF 11.52 .920" AF 1.09 13mm 10.80 24mm 5/16" AF 3.07 1"AF 2.40 1.1.324 AF 5.18 1.100AF 2.88 1.23/8" AF 2.90 1.200AF 3.001/4 AF 4.34 1.300AF 3.127/16" AF 9.290.437 5.81.445 AF 10.611/2" AF 7.2013mm AF 7.320.525" AF 11.04

We are currently expanding our stock of Whitworth and BA Stainless Hexagons in 303 & 316 Please enquire.

Squares 303 Squares 304Per foot/300mm Per foot/300mm Per inch/25mm3/16" 5.94 1/8" 7/8" 1.751/4" 8mm 3.90 20mm 2.225/16" 10mm 5.42 25mm 2.103/8" 1/2" 6.13 1" 2.107/16" 5/8" 6.96 1 1/4" 2.871/2" 3/4" 15.84

If your size is not listed please enquire. We also have limited stocks of 316 Squares.

Stainless Angles

We have a limited range of equal angles in stock in 304 and 316 grades, Please enquire.

19

M-Machine 01325 381300 Stainless Steel.

Stainless Flats 304 Stainless Flats 316Per foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm3mm x 12mm 1.50 6mm x 30mm 0.66 3mm x 12mm 2.81 10mm x 40mm 1.183mm x 20mm 1.80 6mm x 40mm 0.72 3mm x 20mm 3.24 12mm x 25mm 1.063mm x 25mm 2.11 6mm x 50mm 0.83 3mm x 25mm 3.30 20mm x 100mm 6.193mm x 40mm 2.52 8mm x 20mm 0.48 3mm x 30mm 3.88 25mm x 75mm 6.603mm x 30mm 2.22 8mm x 25mm 0.52 6mm x 12mm 4.183mm x 50mm 2.88 8mm x 40mm 0.70 6mm x 25mm 4.803mm x 75mm 4.38 8mm x 50mm 0.86 6mm x 30mm 6.025mm x 12mm 1.80 10mm x 20mm 0.535mm x 20mm 2.69 10mm x 25mm 0.60 Please note: The sizes above are some samples of5mm x 25mm 3.02 10mm x 40mm 0.84 316 Stainless flats we hold in stock.5mm x 40mm 5.88 12mm x 20mm 0.72 If your size is not listed please enquire.5mm x 50mm 7.46 12mm x 25mm 0.776mm x 12mm 2.40 12mm x 40mm 0.86 Imperial Flats are no longer available or are very6mm x 15mm 2.50 difficult to obtain, Please check your tolerance 6mm x 20mm 2.69 before ordering.6mm x 25mm 6.60

Stainless Sheet 304 Also available in 316Per sq foot/300mm sq24g/.5mm 5.4022g/.7mm 6.2420g 7.9019g/1mm 8.0618g/1.2mm 9.171.5mm 10.5016g14g/2.0mm 12.5310g/3.0mm 20.756mm1/4"

We are also building stock of INCONEL 600 sheet used for model jet turbine applications etc.

20

M-Machine 01325 381300 Stainless Steel.Stainless Tube. 316Per Foot/300mm1/16" OD x 33swg 6.07 6mm x 1.0mm 5.77 3/4" OD x 16swg 14.241/16" OD x 30swg 5.92 1/4" OD x 22swg 4.20 3/4" OD x 18swg 11.391/16" OD x 27swg 6.29 1/4" OD x 20swg 4.91 1" OD X 10swg 23.971/16" OD x 24swg 5.69 5/16" OD x 22swg 5.45 1-3/4" OD X 10swg3/32" OD x 30swg 4.87 5/16"OD x 20swg 6.043/32" OD x 27swg 4.87 5/16"OD x 18swg 6.401/8" OD x 30swg 5.50 8mm x 1.0mm 5.721/8" OD x 24swg 4.35 3/8" OD x 20swg 5.411/8" OD x 22swg 4.39 3/8" OD x 18swg 6.641/8" OD x 20swg 4.51 3/8" OD x 16swg 7.165/32" OD x 33swg 7.20 7/16"OD x 20swg 9.345/32" OD x 27swg 4.37 12mm x 1.5wall 10.965/32" OD x 24swg 4.75 1/2" OD x 20swg 9.023/16" OD x 27swg 4.87 1/2" OD x 18swg 6.953/16" OD x 24swg 5.26 1/2" OD x 16swg 10.963/16" OD x 22swg 4.60 5/8" OD x 18swg 10.753/16" OD x 20swg 4.82 5/8" OD x 16swg 12.04

Please note: We are currently expanding the range of Stainless tubes in 316 and 304 grades.We can also supply nominal bore tube Sched 5 to 160.Also Thin wall Needle tubes. Whatever your requirement please enquire.

Inconel Sheet & Tube are also available.

21

M-Machine 01325 381300 Steel Rounds.Bright Steel rounds Imperial EN1A (230M07) Bright Steel Rounds Metric EN1A (23M07)Per feet/300mm Per Inch/25mm Per feet/300mm Per inch/25mm1/16" 1-1/16" 4.20 1 5/8" D 0.98 2mm 40mm 0.773/32" 0.61 1-1/8" 5.76 1 3/4" D 0.98 3mm 0.60 45mm 1.031/8" 0.61 1 3/16" 5.76 1 7/8" D 1.02 4mm 0.66 50mm 1.255/32" 0.61 1 1/4" 7.18 2" D 1.44 5mm 0.70 55mm 1.433/16" 0.61 1 5/16" 8.26 2 1/4" D 1.68 6mm 0.84 60mm 1.567/32" 0.72 1 3/8" 8.33 2 1/8" 1.27 7mm 1.50 65mm 1.961/4" 0.72 1 1/2" 9.84 2 3/8" D 1.74 8mm 0.96 70mm 2.119/32" 0.72 2 1/2" D 1.92 9mm 1.02 75mm 2.405/16" 0.72 2 5/8" D 2.64 10 mm 1.08 90mm 3.483/8" 1.10 2 3/4" D 2.70 12mm 1.13 110mm 6.307/16" 1.27 2 7/8" D 2.76 13mm 1.32 125mm 7.491/2" 1.30 3" D 2.82 14mm 1.43 130mm 7.739/16" 1.38 3 1/4" D 2.94 15mm 1.685/8" 1.91 3 1/2" D 3.84 16mm 1.8011/16" 2.28 3 3/4" D 4.80 17mm 2.643/4" 3.14 4" D 5.10 18mm 2.7013/16" 2.78 4 1/2" D 5.76 20mm 2.887/8" 3.04 5" D 6.60 22mm 3.1715/16" 3.65 6 " D 10.80 24mm 3.301" 3.84 6 1/2" D 25mm 3.72

28mm 3.9030mm 5.7632mm 6.0035mm 8.30

EN1A is a free machining mild steel for general purpose work. Also available is a Leaded version EN1APb

Bright Steel Rounds Imperial EN3 (080A15) Bright Steel Rounds Metric EN3 (080A15)Per foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm1/8" D 0.60 1 5/8" D 0.84 3mm D 0.89 30mm 5.333/16" D 0.60 1 3/4" D 1.01 4mm D 0.90 35mm 1/4" D 0.60 2" D 1.44 6mm D 0.91 40mm 0.845/16" D 0.84 21/4" D 1.79 8mm D 0.92 45mm 0.903/8" D 1.15 23/8" D 3.47 10mm D 0.96 50mm 1.087/16" D 1.39 2 1/2" D 2.10 12mm D 1.10 60mm 1.681/2" D 1.44 2 3/4" D 2.50 14mm D 1.75 65mm 1.869/16" D 1.80 3" D 2.69 15mm D 1.99 90 mm 4.325/8" D 2.04 31/4" D 2.96 16mm D 2.00 100 mm 3/4" D 2.40 4" D 4.80 17mm D 2.23 150mm 7/8" D 3.24 6.1/2" D 20mm D 2.401 " D 3.53 24mm D 6.171 1/8" D 4.57 25mm 3.481 1/4" D 5.051 3/8" D 5.831 1/2" D 7.08

EN 3 Black (070M20) also available in Metric sizes. Please enquire.

22

M-Machine 01325 381300 Steel Rounds.Bright Steel Rounds Imperial EN8 (080M40) Bright Steel Rounds Metric EN8 (080M40)Per foot/300mm Per inch/25mm Per foot/300mm Per inch1/4" 1.30 1 5/8" D 0.77 6mm D 1.94 40mm D 0.845/16" 1.34 1 3/4" D 0.96 8mm D 1.34 50mm D 1.303/8" 1.49 2" 1.32 10mm D 1.38 55mm D 1.567/16" 1.99 2 1/8" D 1.56 12mm D 1.61 65mm 1.991/2" 2.16 2 1/4" D 2.04 20mm D 2.78 70mm 2.103/4" 2.54 2 1/2" D 2.40 30mm D 5.405/8" 2.82 2 3/4" D 2.697/8" 3.12 3" 3.001" 4.10 4" 4.801 1/8" 5.231 1/4" 5.281 3/8" 8.641 1/2" 10.08

We have limited stock of EN8DM (212A42) Free machining. Please Enquire.And also EN8 Black diameters.

Bright Steel Rounds Imperial EN24T (817M40) Bright Steel Rounds Metric EN24T (817M40)Per foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm1/4" 1.98 1 5/8" 1.56 10mm 3.56 40mm 1.805/16" 2.86 1 3/4" 1.80 16mm 5.57 50mm 2.163/8" 2.94 2" 2.40 20mm 5.70 155mm1/2" 3.00 3" 4.20 25mm 7.15 180mm 5/8" 4.10 30mm 9.96 260mm 3/4" 8.887/8" 9.361" 9.7411/8" 9.901 1/4 " 11.401 3/8" 13.181 1/2" 13.20

We also stock EN16T (605M36) EN19A (708M40)EN40B (722M24) Nitriding steel, and other EN spec steels.

Precision Ground EN1A RoundsPer foot/300mm1/4" D 5.80 6mm D5/16" D 8mm D 4.683/8 "D 8.09 10mm D 5.987/16" D 12mm D1/2" D 6.87 16mm D 9.305/8" D 9.82 20mm D 11.5211/16" D 12.24 25mm D 16.023/4" D 12.36 30mm D 16.207/8" D 12.60 35mm D 19.581" D 15.60 40mm D 21.001-1/8" D1-1/4" D 16.061-1/2" D 20.64

23

Steel Flats.M-Machine 01325 381300

Imperial Bright Flats EN32B (080A15)Per Foot/300mm Per inch/25mm1/16" x 1/4" 0.54 3/16" x 1" 1.92 5/16" x 1" 2.28 1/2" x 1 1/2" 4.20 3/4" x 1 3/4" 0.601/16" x 3/8" 0.60 3/16" x 11/4" 2.16 5/16" x 1 1/4". 2.60 1/2" x 1 3/4" 5.16 3/4" x 2" 0.721/16" x 1/2" 0.94 3/16" x 1 1/2" 2.28 5/16" x 1 1/2" 2.81 1/2" x 2" 5.40 3/4" x 21/4" 0.861/16" x 5/8" 0.96 3/16" x 1 3/4" 3.06 5/16" x 2" 4.50 1/2" x 2 1/4" 6.88 3/4" x 21/2" 0.901/16" x 3/4" 0.98 3/16" x 2" 3.30 5/16" x 3" 5.64 1/2" x 2 1/2" 7.80 3/4" x 3" 1.041/16" x 1" 1.01 3/16" x 2 1/2" 3.96 5/16" x 4" 8.94 1/2" x 3" 10.30 3/4" x 4" 1.701/16" x 1 1/4" 1.03 3/16" x 3" 6.30 5/16" x 4 1/2" 0.00 1/2" x 31/2" 13.20 3/4" x 5" 2.421/16" X 1 1/2" 1.06 3/16" x 4" 9.24 5/16" x 6" 10.32 1/2" x 4" 13.80 3/4" x 6" 2.521/16" x 2" 1.08 3/16" x 6" 12.84 3/8" x 1/2" 1.80 1/2" x 5" 14.40 1" x 1 1/4" 0.821/16" x 21/2" 1.14 1/4" x 3/8" 1.22 3/8" x 5/8" 2.16 1/2" x 6" 18.36 1" x 1 1/2" 0.841/16" x 3" 1.19 1/4" x 1/2" 1.32 3/8" x 3/4" 2.22 5/8" x 3/4" 3.00 1" x 1 3/4" 0.901/16" x 4" 1.36 1/4" x 5/8" 1.44 3/8" x 7/8" 2.57 5/8" x 1" 3.48 1" x 2 " 0.971/8" x 1/4" 0.55 1/4" x 3/4" 1.68 3/8" x 1" 2.94 5/8" x 1 1/4" 4.39 1" x 2-1/4 " 1.301/8" x 3/8" 0.58 1/4" x 7/8" 1.75 3/8" x 1 1/4" 3.00 5/8" x 1 1/2" 5.28 1" x 2 1/2" 1.441/8" x 1/2" 0.88 1/4" x 1" 1.85 3/8" x 1 1/2" 3.17 5/8" x 1 3/4" 6.12 1" x 3" 1.681/8" x 5/8" 0.89 1/4" x 1 1/4" 2.26 3/8" x 1 3/4" 3.44 5/8" x 2" 6.48 1" x 4" 1.991/8" x 3/4" 1.08 1/4" x 1 1/2" 2.40 3/8" x 2" 3.74 5/8" x 21/2" 10.02 1" x 7" 3.601/8" x 7/8" 1.10 1/4" x 1 3/4" 3.12 3/8" x 2 1/4" 3.25 5/8" x 3" 10.20 1" x 8" 4.201/8" x 1" 1.14 1/4" X 2" 3.30 3/8" x 2 1/2" 5.32 5/8" x 4" 10.98 1 1/4" x 1 1/2" 1.081/8" x 1 1/4" 1.73 1/4" x 2 1/4" 4.25 3/8" x 3" 6.00 5/8" x 5" 13.80 1 1/4" x 1 3/4" 1.121/8" x 1 1/2" 2.11 1/4" x 2 1/2" 4.50 3/8" x 31/2" 13.20 5/8" x 10" 58.44 1 1/4" x 2" 1.141/8" x 1 3/4" 2.78 1/4" x 3" 4.85 3/8" x 4" 13.80 3/4" x 1" 4.92 1 1/4" x 21/2" 1.201/8" x 2" 2.82 1/4" x 31/2" 7.46 3/8" x 41/2" 14.40 3/4" x 1 1/4" 5.50 1 1/4" x 3" 1.681/8" x 2 1/2" 2.86 1/4" x 4" 9.00 3/8" x 6" 15.60 3/4" x 1 1/2" 5.86 1 1/4" x 4" 1.741/8" x 3" 3.31 1/4" x 5" 9.48 3/8" x 7" 16.50 1 1/2" x 2" 1.781/8" x 4" 4.99 1/4" x 6" 13.16 3/8" x 8" 17.34 1 1/2" x 2 1/2" 1.811/8" x 6" 7.20 1/4" x 7" 13.80 3/8" x 10" 27.72 1 1/2" x 3" 2.153/16" x 3/8" 1.58 1/4" x 8" 14.10 1/2" x 5/8" 2.10 1 3/4" x 2 " 2.163/16" x 1/2" 1.62 5/16" x 1/2" 1.37 1/2" x 3/4" 3.00 1 3/4" x 2 1/2" 2.523/16" x 5/8" 1.63 5/16" x 5/8" 1.92 1/2" x 7/8" 3.00 2" x 2 1/2" 2.643/16" x 3/4" 1.66 5/16" x 3/4" 2.04 1/2" x 1" 3.22 2" x 3" 3.893/16" x 7/8" 1.86 5/16" x 7/8" 2.26 1/2" x 1 1/4" 3.26 2" x 3 1/2" 4.13

2-1/2" x 4" 5.35

24

Steel Flats.M-Machine 01325 381300

Metric Bright Flats EN32B (080A15)Per Foot/300mm Per inch/25mm3mm x 10mm 1.08 6mm x 70mm 4.25 10mm x 100mm 10.10 16mm x 60mm 11.57 20mm x 70mm 1.203mm x 12mm 1.14 6mm x 75mm 4.61 10mm x 125mm 10.20 16mm x 65mm 11.64 20mm x 80mm 1.443mm x 16mm 1.32 6mm x 80mm 4.68 10mm x 150mm 12.31 16mm x 70mm 11.70 20mm x100mm 1.613mm x 20mm 1.34 6mm x 90mm 4.92 12mm x 16mm 1.54 16mm x 75mm 11.76 20mm x120mm 1.673mm x 25mm 1.37 6mm x 100mm 5.42 12mm x 20mm 2.09 16mm x 80mm 12.00 20mm x125mm 2.233mm x 32mm 1.01 6mm x 125mm 9.00 12mm x 25mm 2.76 16mm x100mm 13.87 20mm x200mm 3.123mm x 40mm 1.25 8mm x 12mm 1.80 12mm x 30mm 3.60 20mm x 25mm 3.94 25mm x 30mm 0.603mm x 50mm 1.70 8mm x 15mm 2.10 12mm x 32mm 3.72 20mm x 30mm 4.20 25mm x 32mm 0.793mm x 60mm 1.96 8mm x 20mm 2.16 12mm x 35mm 4.08 20mm x 32mm 4.68 25mm x 35mm 0.845mm x 10mm 1.02 8mm x 25mm 2.22 12mm x 40mm 4.85 20mm x 35mm 5.38 25mm x 40mm 0.905mm x 16mm 1.27 8mm x 30mm 2.28 12mm x 50mm 5.10 20mm x 40mm 5.74 25mm x 50mm 0.965mm x 20mm 1.30 8mm x 40mm 2.48 12mm x 60mm 5.42 20mm x 45mm 8.09 25mm x 60mm 0.985mm x 25mm 1.32 8mm x 45mm 3.31 12mm x 70mm 7.98 20mm x 50mm 8.28 25mm x 65mm 1.085mm x 30mm 1.34 8mm x 50mm 3.36 12mm x 75mm 8.10 20mm x 60mm 8.34 25mm x 75mm 1.485mm x 40mm 1.50 8mm x 60mm 3.43 12mm x 80mm 8.22 20mm x 65mm 8.76 25mm x 80mm 1.505mm x 50mm 1.80 8mm x 70mm 4.24 12mm x 100mm 10.87 25mm x 100mm 1.565mm x 60mm 2.74 8mm x 75mm 5.94 12mm x 125mm 11.21 30mm x 40mm 1.205mm x 100mm 5.70 8mm x 100mm 6.00 12mm x 150mm 15.48 30mm x 45mm 1.266mm x 10mm 1.30 8mm x 150mm 8.92 12mm x 160mm 17.06 30mm x 50mm 1.326mm x 12mm 1.30 10mm x 12mm 4.43 15mm x 30mm 2.97 30mm x 60mm 1.516mm x 16mm 1.42 10mm x 16mm 1.68 15mm x 70mm 7.37 30mm x 70mm 1.566mm x 20mm 1.44 10mm x 20mm 1.72 16mm x 20mm 3.60 30mm x 80mm 2.526mm x 25mm 1.44 10mm x 25mm 1.99 16mm x 25mm 4.80 30mm x 90mm 2.586mm x 30mm 1.50 10mm x 30mm 2.89 16mm x 30mm 5.36 30mm x 100mm 2.646mm x 35mm 1.98 10mm x 35mm 3.17 16mm x 32mm 6.67 30mm x 150mm 3.676mm x 40mm 2.16 10mm x 40mm 4.78 16mm x 35mm 6.72 40mm x 45mm 1.736mm x 50mm 2.50 10mm x 50mm 6.00 16mm x 40mm 6.78 40mm x 50mm 1.806mm x 60mm 3.00 10mm x 60mm 6.06 16mm x 45mm 6.84 40mm x 60mm 2.106mm x 65mm 3.65 10mm x 65mm 6.12 16mm x 50mm 9.82 40mm x 70mm 2.90

10mm x 70mm 7.10 40mm x 90mm 3.1110mm x 90mm 9.58 50mm x 125mm 5.59

25

Steel Flats (Black)M-Machine 01325 381300

Black FlatsPer foot/300mm3mm x 13mm 0.48 6mm x 70mm 2.76 10mm x 50mm 2.76 20mm x 40mm 4.563mm x 16mm 0.53 6mm x 75mm 3.07 10mm x 60mm 3.06 20mm x 45mm 5.323mm x 20mm 0.62 6mm x 80mm 3.26 10mm x 65mm 3.96 20mm x 60mm 8.503mm x 25mm 0.72 6mm x 100mm 4.28 10mm x 75mm 4.63 25mm x 45mm 6.483mm x 30mm 0.84 6mm x 120mm 4.80 10mm x 90mm 4.94 25mm x 50mm 7.463mm x 40mm 0.96 6mm x 150mm 5.76 10mm x 100mm 5.16 30mm x 50mm 7.943mm x 50mm 1.20 6mm x 180mm 6.82 10mm x 130mm 7.923mm x 80mm 2.33 6mm x 200mm 7.80 10mm x 150mm 8.043mm x 100mm 2.70 6mm x 250mm 8.35 10mm x 200mm 11.743mm x 150mm 5.16 8mm x 20mm 1.80 12mm x 20mm 2.525mm x 13mm 0.65 8mm x 30mm 1.60 12mm x 25mm 2.585mm x 16mm 0.84 8mm x 40mm 1.92 12mm x 30mm 2.645mm x 20mm 0.92 8mm x 45mm 2.64 12mm x 40mm 3.465mm x 25mm 1.25 8mm x 50mm 2.76 12mm x 50mm 4.205mm x 30mm 1.32 8mm x 60mm 2.88 12mm x 60mm 4.995mm x 40mm 1.48 8mm x 65mm 3.06 12mm x 75mm 5.715mm x 45mm 1.85 8mm x 70mm 3.30 12mm x 80mm 5.765mm x 50mm 2.10 8mm x 75mm 3.60 12mm x 100mm 6.985mm x 60mm 2.40 8mm x 80mm 3.77 12mm x 120mm 9.005mm x 75mm 2.98 8mm x 90mm 4.87 15mm x 25mm 2.645mm x 80mm 3.18 8mm x 100mm 6.00 15mm x 30mm 3.145mm x 100mm 4.20 8mm x 120mm 6.24 15mm x 40mm 4.085mm x 130mm 6.34 8mm x 150mm 7.03 15mm x 50mm 5.596mm x 16mm 0.85 8mm x 180mm 8.52 15mm x 60mm 6.006mm x 20mm 0.96 10mm x 25mm 1.44 15mm x 75mm 6.586mm x 25mm 1.56 10mm x 30mm 1.87 15mm x 100mm 8.766mm X 30mm 1.62 10mm x 35mm 2.10 15mm x 120mm 9.606mm X 35mm 1.78 10mm x 40mm 2.40 15mm x 180mm 15.716mm x 40mm 1.92 10mm x 45mm 2.586mm x 50mm 2.126mm x 60mm 1.92

Black (Hot Rolled ) Steel is ideal for cold bending and is more stable when machining.

These flats are only available in Metric sizes. Please enquire if your size is not shown.

26

Steel Squares & Hexagons.M-Machine 01325 381300

Bright Squares (EN3) Imp. Bright Squares (EN3) MetricPer foot/300mm Per inch/25mm Per foot/300mm Per inch/25mm3/16" sq 1.32 1 1/4" Sq 0.78 4mm sq 1.10 32mm sq 0.791/4" sq 1.38 1 3/8" sq 0.84 5mm sq 0.67 35mm sq 0.845/16" sq 1.44 1 1/2" sq 1.25 6mm sq 1.44 40mm sq 1.013/8" sq 2.16 1 3/4" sq 1.72 8mm sq 1.50 50mm sq 1.801/2" sq 2.64 2" sq 2.16 10mm sq 1.56 60mm sq 2.647/16" sq 1.78 2 1/4" sq 2.32 12mm sq 1.80 75mm sq 3.909/16" sq 1.84 2 1/2" sq 2.64 14mm sq 3.18 80mm sq 4.205/8" Sq 2.98 3" sq 3.60 15mm sq 3.243/4" Sq 3.60 16mm sq 3.307/8" Sq 4.49 20mm sq 3.741" sq 6.94 25mm sq 5.901 1/8" Sq 11.04 30mm sq 7.30

We do have limited stock of Black squares and EN8 bright squares. Please enquire.

Hexagons (EN1A)Per foot/300mm Per inch/25mm1/8" AF 0.98 0.445" AF 1.16 1-1/2" AF 0.96 3/32" AF 0.96 0.525" AF 2.88 1.67" AF 1.08 5/32" AF 0.96 9/16" AF 1.52 1.86" AF 1.633/16" AF 0.84 0.601" AF 1.84 2.76" AF 2.930.218 7/32" AF 0.74 0.625"AF 3.050.193 (6BA) 1.01 17mm AF 1.805mm AF 0.82 0.710 AF 3.721/4" AF 0.74 11/16" AF 2.167mm AF 0.74 3/4" AF 3.605/16" AF 0.74 13/16" AF 3.598mm AF 0.74 0.812" AF 3.12.324 AF 0.74 0.820" AF 3.003/8" AF 0.74 7/8" AF/ .875" 4.2210mm AF 2.34 0.920" AF 4.857/16" AF 1.32 1" AF 5.7812mm AF 2.88 1.010"AF 4.491/2" AF 1.46 1.1AF 5.6413mm AF 1.68 1-1/4" AF 6.00

We are also building stocks of BA,Whit & BSF sizes.Please enquire.

We can supply Hexagons in other Steel specs.

27

M-Machine 01325 381300 Silver Steel.Silver Steel Diameters (Imperial) Silver Steel Diameters (Metric)Per 13 Inch Length Per 330mm Length1/16" 0.66 9/32" 2.52 5/8" 10.44 1 1/4" 29.88 2mm 0.66 7mm 2.90 15mm 10.183/32" 0.72 5/16" 3.02 11/16" 12.00 3mm 0.98 8mm 3.36 16mm 10.221/8" 0.91 3/8" 3.48 13/16" 13.03 3.5mm 1.18 9mm 4.15 17mm 10.805/32" 1.08 13/32" 4.80 3/4" 12.48 4mm 1.01 10mm 4.20 18mm 12.173/16" 1.56 7/16" 5.98 7/8" 17.28 4.5mm 1.56 12mm 4.92 19mm 13.547/32" 1.62 1/2" 7.51 1" 23.76 5mm 1.58 13mm 7.90 20mm 15.241/4" 2.30 9/16" 9.31 1 1/8" 27.00 6mm 2.28 14mm 9.22

Please Note; We also stock sizes in 64ths. Please Enquire.

Heat Treatment of Silver Steel.

Hardening: Quench in cold water at 770 - 790 Deg C, This achieves 64 - 64.5 HRC.Quench in 10% Brine solution to give maximum hardness of 65 HRC

Tempering: Soak for at least one hour at temperature to obtain desired hardness

Temp C. Rockwell C.

175 62.5 - 63.5200 61 -62250 58 - 59300 54 - 55

Heating: To prevent decarburisation and scaling, Heat in temperature controlled salt bath.

These figures are approximate.

Key Steel.Square Key Steel.Per foot/300mm3mm 3.23 4mm 3.24 5/16" 4.50 1/2" 5.10 20mm 24.001/8" 2.35 5mm 3.36 3/8" 4.80 9/16" 15.00 7/8" 21.605/32" 4.03 6mm 3.74 10mm 4.80 5/8" 15.60 1" 22.803/16" 1.92 1/4" 3.77 7/16" 5.10 3/4" 24.00

We also stock some Rectangular section Key steel. Please Enquire.

28

M-Machine 01325 381300 Spring Steel.Spring steel stripPer foot/3oomm3/8" x 18swg 0.71 3/4" x 16swg 1.943/8" x 20swg 1.09 1" x 16swg 2.683/8" x 22swg 1.07 1/2" x 18swg 1.903/8" x 24swg 0.98 1/2" x 20swg 1.007/16" x 20swg 0.80 1/2" x 24swg 0.601/2" x 16swg 1.45 3/4" x 16swg 1.90

Piano Wire (Spring)Per100ft19swg 7.8120swg 7.7422swg 7.0926swg 6.76

Please Note: Spring steel and wire are in a soft condition.If your size is not listed please enquire.

Shim Steel.Per 1/2 sq foot0.0015" Th 3.77 0.008" Th 2.880.001" Th 4.20 0.010" Th 2.340.002" Th 5.57 0.015" Th 3.180.003" Th 2.20 0.020" Th 3.240.004" Th 2.72 0.025" Th 3.300.005" Th 2.08

29

M-Machine 01325 381300 Steel Angle.Bright Steel Angle.Per foot/300mm16mm x 16mm x 3mm 2.28 32mm x 32mm x 6mm20mm x 20mm x 3mm 3.34 40mm x 40mm x 4mm 7.3225mm x 25mm x 3mm 3.53 40mm x 40mm x 5mm 9.1425mm x 25mm x 5mm 6.24 40mm x 40mm x 6mm 10.6632mm x 32mm x 4mm 50 X 50 X 6mm 14.0432mm x 32mm x 5mm 7.02

Please note: 1/2" x 1/2" x 1/8" is no longer available.

Black steel Angle.Per foot/300mm13 x 13 x 3mm 1.44 40 x 40 x 4mm 2.21 60 x 60 x 10mm 6.0016 x 16x 3mm 1.50 40 x 40 x 5mm 2.64 70 x 70 x 6mm 6.6020 x 20 x 3mm 1.50 40 x 40 x 6mm 3.48 70 x 70 x 8mm 7.2025 x 25 x 3mm 1.56 40 x 50 x 5mm 3.17 80 x 80 x 8mm 7.8025 x 25 x 5mm 1.51 50 x 50 x 3mm 2.27 80 x 80 x 10mm 9.6025 x 25 x 6mm 1.67 50 x 50 x 5mm 3.40 90 x 90 x 12mm 12.1830 x 30 x 3mm 1.62 50 x 50 x 6mm 4.39 100 x 100 x 8mm POA30 x 30 x 4 mm 1.68 50 x 50 x 8mm 5.27 100 x 100 x 10mm POA30 x 30 x 5 mm 1.92 60 x 60 x 6mm 5.46 150 x 150 x 10mm POA40 x 40 x 3mm 2.16 60 x 60 x 8mm 6.42 150 x 150 x 12mm POA

Also available, Unequal Angle and channels Please enquire.

Sheet Steel & Plate.Cold rolled steel (CR4)Per sq foot/300mm sq0.7mm TH 1.80 1.2 mm TH 2.88 3mm TH 6.000.8mm TH 1.98 1.5 mm TH 3.960.9mm TH 1.98 2.0mm TH 4.501.0 mm TH 2.10 2.5mm TH 4.68

We can also supply Hot rolled steel plate in most thicknesses cut to your requirments as a special order.

We can also supply Galvanized and Zintec steel sheet in most sizes.

Tin Plate.

0.3mm0.4mm0.5mm

30

Gauge Plate.M-Machine 01325 381300Imperial

ThicknessPrice per 9 inch Length. Discount for 18 inch Lengths = 9 inch price x 1.8Wide 1/32" 1/16" 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1"1/8" 3.703/8" 4.26 4.26 4.48 4.64 5.40 6.06 7.08 10.381/2" 4.20 7.15 4.64 5.40 7.15 6.60 10.805/8" 4.58 4.64 5.28 7.99 11.103/4" 4.48 4.64 5.54 8.45 10.69 11.68 13.447/8" 16.801" 4.69 5.28 6.50 6.94 7.68 8.74 11.09 12.83 19.691-1/4" 5.40 7.08 10.60 14.16 27.221-1/2" 7.99 8.27 9.64 12.38 10.74 16.20 18.76 22.702" 7.25 9.04 11.58 14.81 19.54 32.762-1/4" 6.002-1/2" 9.62 13.48 23.34 27.853" 10.32 11.34 12.16 5.40 19.84 26.63 48.234" 11.95 14.24 15.16 18.38 26.17 28.78 40.635" 43.026" 28.45 46.46 60.767" 19.80 41.748" 43.02 50.90 57.95 96.8610"12" 46.46 54.48 60.76 POA

MetricThickness

Price per 250mm Length. Discount for 500mm length = 250mm price x 1.8Wide 1mm 1.5mm 2mm 3mm 4mm 5mm 6mm 8mm 10mm 15mm 20mm 25mm 30mm 40mm10mm 4.16 4.57 5.30 5.89 6.41 7.85 10.1815mm 4.48 5.02 5.56 6.34 6.82 10.6018mm 16.8020mm 6.41 6.36 7.40 8.74 17.4525mm 5.00 7.20 7.40 8.59 12.61 14.04 21.6030mm 6.67 7.40 8.74 14.0440mm 6.41 7.50 9.68 13.33 18.26 28.5250mm 7.40 7.25 19.9660mm 6.30 10.3875mm 13.3280mm 31.14

100mm 15.60 17.45 28.52 36.48125mm150mm 26.82 29.93200mm250mm300mm

Imperial Squares.Price per 9" length.1/4" 7.32 1/2" 10.69 1" 24.125/16" 12.20 5/8" 13.97 1 1/4" 35.533/8" 8.65 3/4" 18.55 1 1/2" 42.41

Please Note: This is just a small sample of the range of Gauge plate we have in stockPlease enquire if your size is not listed

31

Steel Tube.M-Machine 01325 381300

Cold Drawn Seamless.Per foot/300mm Per inch/25mm1/4" OD X 20SWG 1.20 7/8" OD X 16 swg 3.28 80 OD x 65ID 4.091/4" OD X 18SWG 1.34 7/8" OD x 18swg POA 3"OD x 16swg POA5/16" OD X 20SWG 1.30 7/8" OD x 12swg 5.58 3"OD x 14swg POA5/16" OD X 16SWG POA 7/8" OD X 10 swg 5.96 3"OD x 10swg POA8mm OD X 1.5mm 2.30 1" OD x 20swg POA 3"OD x 1/4" wall POA8mm OD X 2mm 1.80 1" OD x 18swg POA 3 1/2" OD x 10swg 2.573/8" OD X 20SWG POA 1" OD x 16swg POA 3 1/2" OD x 1/4" 4.383/8" OD X 18 SWG POA 1" OD x 14swg POA 90mm OD x 75mmID 4.033/8" OD X 16 SWG 2.76 1" OD x 10swg 5.84 95mm x 75mm ID 4.1410mm OD X 2mm 2.29 1" OD x 1/4"wall 10.79 100mm x 80mm ID 4.507/16" OD x 20swg 1.61 1-1/8"ODx16swg POA 110mm x 90mm ID 4.517/16" OD x 16swg POA 1-1/8"ODx14swg POA 4" OD x 10swg 3.067/16" OD x 14swg 3.07 1-1/8"ODx12swg 7.00 5" OD x 1/4" POA12mm OD x 1.5 3.00 1-1/8"ODx10swg 5.76 5" OD x 1/2" 5.0812mm OD x 3 3.00 1-1/8"ODx5/32" 6.11 6" OD x 1/2" 7.271/2"OD x 20 SWG POA 1-1/8"ODx1/4" 7.80 180mm x 150mm ID 7.271/2" OD X 18 SWG POA 1-1/4"OD x 16swg POA 244.5OD x 8mm wall 5.101/2" OD X 16 SWG 4.67 1-1/4"OD x 14swg POA1/2" OD X 14 SWG 4.16 1-1/4"OD x 10swg 8.399/16" OD x 20 swg 2.04 1-1/2"OD x 16swg 5.299/16" OD x 18 swg POA 1-1/2"OD x 10swg 7.649/16" OD x 16 swg POA 1-5/8"OD x 16swg POA9/16" OD x 14 swg 3.07 1-5/8"OD x 14swg POA 5/8" OD x 20swg POA 1-5/8"OD x 10swg 12.005/8" OD x 18swg POA 1-5/8"OD x 1/4"wall 8.405/8 OD x 16swg 3.61 42mm x 5mm 8.595/8 OD x 10swg 7.88 1-3/4" OD x 16swg POA17mm x 1mm 2.76 1-3/4" OD x 14swg POA3/4 OD x 20swg 2.81 1-3/4" OD x 10swg 13.733/4" OD x 18swg POA 50mm x 1.5 Wall 9.243/4" OD x 16swg POA 2" OD x 16swg POA3/4 OD x 14swg 6.78 2" OD x 14swg POA3/4 OD x 10swg POA 2" OD x 10swg 9.2419mm x 2mm 2.72 2" OD x 3/16 wall 13.4419mm x 3. 2mm 2.24 2" OD x 1/4 wall 17.1522mm x 3mm 5.96 2-3/8" OD x2" bore 16.44

2-1/2" OD x 3/8 wall 28.492.75" OD x 1/4" 27.06

ERW Steel Tube.(Welded Tube)Per foot/300mm1/2" OD x 16swg 1.07 1-1/2"OD X 16swg POA 60mmO/D x 1.5mm 4.429/16"OD x 14swg 2.95 1-1/2"OD X 14swg POA 60mmO/D x 3mm 2.645/8"OD x 16swg 1.54 1-1/2"OD X 10swg POA 2-1/2"OD x 16swg 5.515/8"OD x 14swg 2.18 1-5/8" OD x 16swg 3.76 2-1/2"OD x 14swg POA5/8"OD x 10swg POA 1-5/8" OD x 14swg POA 2-1/2"OD x 10swg 7.273/4" OD x 16swg 1.74 1-5/8" OD x 10swg POA 70mmO/D x 1.5mm 5.573/4" OD x 14swg POA 1-3/4" OD x 16swg POA 3"OD x 16swg 5.583/4" OD x 10swg POA 1-3/4" OD x 14swg POA 3"OD x 14swg POA 19mm OD x 1.2mm 1.54 1-3/4" OD x 10swg POA 3"OD x 10swg POA 19mm OD x 1.5mm 1.68 45mmOD x 2mm 4.91 3.5"OD x 16swg 5.7620mm OD x 1.5mm 1.56 2"OD x 16swg 4.62 3.5"OD x 10swg 10.327/8"OD x 18swg 1.80 2"OD x 14swg POA 3.5"OD x 5mm wall 9.387/8"OD x 16swg 1.76 2"OD x 10swg POA 4"OD x 16swg 5.871"OD x 16swg 1.99 2-1/4"OD x 16swg 4.80 4"OD x 10swg 10.161-1/8"OD x 16swg 2.93 2-1/4"OD x 14swg 7.93 4.5"OD x 16swg 13.0332mm OD x 1.5mm 2.68 2-1/4"OD x 10swg POA 6" OD x 10swg 19.221-3/8"OD x 14swg 3.62

32

33

Sheet1