LATHE MACHINE Name-Praveen Singh Rawat Section-M1903 Roll.No-09 Registration Id-10906853
LATHE MACHINE
Name-Praveen Singh Rawat
Section-M1903
Roll.No-09
Registration Id-10906853
Introduction
Lathe is machine tool that performs turning operations in which unwanted material is removed from a work piece rotated against a cutting tool.
Classification of lathe machine
Speedlathe
Engine lathe
Bench lathe
Tool lathe
Capston and turret lathe
Special purpose
lathe
Automatic lathe
Construction of lathe machine
Important element of lathe Rotating speed, a cutting depth and a sending speed
Calculating Lathe Spindle Speed
Given in revolutions per minuteCutting speed of metal and diameter of work
must be knownProper spindle speed set by dividing
CS (in/min) by circumference of work (in)
Rev/min= CS* 12 / Pi *D
Chucks Self centering chuck –
A self-centering chuck, also known as a scroll chuck uses dogs (usually called jaws), interconnected via a scroll gear (scroll plate), to hold on to a tool or work piece.
Collet chuck
Special adapter fitted into taper of headstock spindle, and hollow draw bar having internal thread inserted in opposite end of headstock spindle. It draws collet into tapered adapter causing collet to tighten on work piece.
Face plateA lathe faceplate is the basic work holding accessory for a wood or metal turning lathe. It is a circular metal (usually cast iron) plate which fixes to the end of the lathe spindle.
Hydraulic circuit of CNC lathe machine
Operation on lathe machine
Turning Boring Facing TappingTaper
turning Threading
Thank you
Any question ????????