1 LATEST ADDITION IN IRC LIBRARY S.NO. DESIGNATION NAME OF THE TITLE 1. Indian Technical Textile Association (ITTA) Handbook on “Geosynthetics Case Studies of ITTA Members”, 2013 2. R.K. Srivastava Study of Rigid Pavement For Village Roads in Alluvial Regions: A Thesis 3. AASHTO Roadside Design Guide, 4 th Revision, 2011 4. AASHTO Guide For Development of Rest Areas on Major Arterials and Freeways 5. AASHTO A Policy on Geometric Design of Highways & Streets 6. AASHTO R 36-12 : Standard Practice For Evaluating Faulting of Concrete Pavements 7. AASHTO M 249-12 : Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form) 8. AASHTO T 283-07 : Standard Method Test for Resistance of Compacted Hot Mix Asphalt (HMA) to Moisture-Induced Damage, 2011 9. AASHTO T 246-97 : Standard Method of Test For Resistance to Plastic Flow of Bituminous Mixtures Using Marshal Apparatus 10. AASHTO M 325-8 : Standard Specification for Stone Matrix Asphalt (SMA) 11. Jean Deloche The Ancient Bridges of India 12. John Reas The UK National Annex to BS EN 1991-1-4 13. John Reas BS EN 1991-1-5 14. John Reas PD 6688-1-4 15. Hari Babu Kausal Sangah Rajbhasha (Hindi) 16. Manna Narayan Office Assistant (Hindi) 17. IS:4326-2013 Earthquake Resistant Design and Construction of Buildings – Code of Practice (3 rd Revision) 18. IS:3812 (Pt.1)-2013 Pulverized Fuel Ash-Specification Part 1: For Use as Pozzolana in Cement 19. IS:3812 (Pt.2)-2013 Pulverized Fuel Ash Specification Part 2 For Use as Admixture in Cement Mortar & Concrete 20. MoRT&H AIS:125 : Constructional and Functional Requirements for Road Ambulances 21. Prof. DR. N.S. Srinivasan Taking the High Road Research in Transport in Developing Economies (1955-2013) 22. S.K. Khanna, CEG Justo & A. Veeraragavan Highway Engineering, Rev. 10 th , 2014 23. Transportation Research Record (TRB) 2270 – Environment 2012 24. Transportation Research Record (TRB) 2271 – Sustainable Practices, Performance Measures, and Management 25. Transportation Research Record (TRB) 2272 – Maintenance Services and Surface Weather 2012 26. Transportation Research Record (TRB) 2274 – Transit Vol.1 2012 Thomas B. Deen Distinguished Lecture 27. Transportation Research Record (TRB) 2275 – Transit 2012 Vol.2
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
LATEST ADDITION IN IRC LIBRARY
S.NO. DESIGNATION NAME OF THE TITLE
1. Indian Technical Textile Association (ITTA)
Handbook on “Geosynthetics Case Studies of ITTA Members”, 2013
2. R.K. Srivastava Study of Rigid Pavement For Village Roads in Alluvial Regions: A Thesis
120. NCHRP Synthesis (TRB) 438 – Expedited procurement procedure for emergency construction services
121. NCHRP Synthesis (TRB) 437 – Assessing the long-term performance of mechanically stabilized earth walls
122. NCHRP Synthesis (TRB) 436 – Local policies and practices that support safe pedestrian environments
123. NCHRP Synthesis (TRB) 434 – Use of the U.S. census bureau’s public use micro data sample (PUMS) by state departments of transportation and metropolitan planning organisations
124. NCHRP Synthesis (TRB) 432 – Recent roadway geometric design research for improved safety and operations
126. NCHRP Synthesis (TRB) 430 – Cost effective and sustainable road slope stabilization and erosion control
127. Special Report (TRB) 301 – Air traffic controller staffing in the en route domain : A review of the federal aviation administration’s task load model
128. Special Report (TRB) 303 – Equity of evolving transportation finance mechanisms
129. Special Report (TRB) 307 – Policy options for reducing energy use and greenhouse gas emissions from U.S. Transportation
130. Special Report (TRB) 309 – Evaluating the effectiveness of offshore safety and environmental management systems
131. Special Report (TRB) 310 – Worker Health and Safety on Offshore Wind Farms
6
NEW ADDITIONS TO IRC LIBRARY
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
1. 15246 MS-1 : Asphalt Institute Asphalt Pavements for Highways and Streets, 2011
2. 15247 MS-21 : Asphalt Institute For Asphalt Concrete and Other Hot-Mix Types, 6th Rev., 2011
3. 15248 MS-41 : Asphalt Institute The Asphalt Handbook, 7th Rev., 2011
4. 15249 MS-161 : Asphalt Institute
Asphalt in Pavement Preservation and Maintenance, 4th Rev., 2011
5. 15250 MS-171 : Asphalt Institute
Asphalt Overlays for Highway and Street Rehabilitation, 4th Rev., 2011
6. 15251 MS-191 : Asphalt Institute
Basic Asphalt Emulsion Manual, 4th Rev., 2011
7. 15252 MS-221 : Asphalt Institute
HMA Construction (Hot Mix Asphalt Pavements), 2nd Rev., 2011
8. 15253 MS-251 : Asphalt Institute
Asphalt Binder Testing, 2nd Rev., 2011
9. 15254 SP-11 : Asphalt Institute Superpave: Performance Graded Asphalt Binder Specification and Testing, 3rd Rev., 2001
19. 15495 GOST R 52607-2006 Traffic Control Devices : Roadside Safety Barriers: General Technical Requirements
20. 15496 AASHTO M 249-11 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
21. 15497 AASHTO M 325-08 Standard Specification for Stone Matrix Asphalt (SMA)
22. 15498 AASHTO R 46-08 Standard Practice for Designing Stone Matrix Asphalt (SMA)
23. 15499 AASHTO T 245-97 (2008) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
24. 15500 AASHTO T 283-07 Standard Method of Test for Resistance of Compacted Hot Mix Asphalt (HMA) to Moistur4e-Induced Damage
25. 15501 DIN 53504 Testing of rubber – Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test English translation of DIN 53504:2009-10
26. 15502 DIN 53508 Accelerated ageing of rubber
27. 15503 DIN 53512 Detgermining the rebound resilience of rubber using the Schob pendulum
28. 15504 DIN 53122-1 Determination of the water vapour transmission rate of plastic film,
7
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
rubber sheeting, paper, board and other sheet materials by gravimetry
29. 15505 DIN EN 1317-2 Road restraint systems- Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets English translation of DIN EN 1317-2: 2011-01
30. 15506 DIN EN 1317-3 Road restraint systems – Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions, English translation of DIN EN 1317-3:2011-01
31. 15507 DIN EN 1317-5 Road restraint systems – Part 5: Product requirements and evaluation of conformity for vehicle restraint systems (includes amendment A1:2008) English version of DIN EN 1317-5: 2008-10
32. 15508 DIN EN 10025-1 Hot rolled products of structural steels: Part 1: General technical delivery conditions English version of DIN EN 10025-1
33. 15509 DIN EN 10025-2 Hot Rolled Products of structural steels : Part 2: Technical delivery conditions for non-alloy structural steels English Version of DIN EN 10025-2
34. 15510 DIN EN 10250-1 Open die steel forgings for general engineering purposes Part 1: General requirements English Version of DIN EN 10250-1
35. 15511 DIN EN 10250-2 Open die steel forgings for general engineering purposes Part 2: Non-alloy quality and special steels English version of DIN EN 10250-2
36. 15512 DIN En 10222-1 Steel forgings for pressure purposes : Part 1: General requirements for open die forgings (includes Amendment A1: 2002) English Version of DIN EN 10222-1: 1998+A1: 2002
37. 15513 DIN ISO 34-1 Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces, 2004
38. 15514 DIN ISO 815-1 Rubber vulcanized or thermoplastic- Determination of compression set – Part 1 : At ambient or elevated temperatures (ISO 815-1:2008) English translation of DIN ISO 815-1:2010-09
39. 15515 DIN ISO 815-2 Rubber, vulcanized or thermoplastic – Determination of compression set – Part 2 : At low temperatures (ISO 815-2: 2008) English translation of DIN ISO 815-2:2010-09
40. 15516 DIN ISO 1431-1 Rubber, vulcanized or thermoplastic – Resistance to Ozone cracking – Part 1 : Static and dynamic strain testing (ISO 1431-1:2004 + Amd 1:2009) English translation of DIN ISO 1431-1:2011-05
41. 15517 DIN ISO 1431-3 Rubber, vulcanized or thermoplastic resistance to ozone cracking – Part 3: reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2000) English translation of DIN ISO 1431-3:2011-05
42. 15518 DIN ISO 1817 Rubber, vulcanized – Determination of the effect of liquids (ISO 1817:2005) English version of DIN ISO 1817:2008-08
43. 15519 DIN ISO 4649 Rubber, vulcanized or thermoplastic – Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2002) English version of DIN ISO 4649-2006-11
44. 15520 DIN EN ISO 12572 Hygrothermal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) English version of DIN EN ISO 12572
8
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
45. 15521 ASTM A36/A36M-08 Standard Specification for Carbon Structural Steel1
46. 15522 ASTM A588/A588M-10 Standard Specification for High Strength Low-Alloy Structural Steel, upto 50 ksi [345 MPa] minimum yield point, with Atmospheric Corrosion Resistance1
47. 15523 ASTM C309-11 Standard Specification for Liquid Membrane – Forming Compounds for Curing Concrete1
48. 15524 ASTM C1202-12 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration1
49. 15525 ASTM C1561 – 10 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry1
50. 15526 ASTM D36/D36M-09 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)1
51. 15527 ASTM D276-12 Standard Test Methods for Identification of Fibers in Textiles1
52. 15528 ASTM D297-93 (Reapproved 2006)
Standard Test Methods for Rubber Products – Chemical Analysis1
53. 15529 ASTM D395-03 (Reapproved 2008)
Standard Test Methods for Rubber Property – Compression Set1
54. 15530 ASTM D412-06a2 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension1
55. 15531 ASTM D471-10 Standard Test Method for Rubber Property – Effect of Liquids1
56. 15532 ASTM D522-93a (Reapproved 2008)
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings1
57. 15533 ASTM D573 – 04 (Reapproved 2010)
Standard Test Method for Rubber – Deterioration in an Air Oven1
58. 15534 ASTM D624 – 00 (Reapproved 2012)
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermplastic Elastomers1
59. 15535 ASTM D711-10 Standard Test Method for No-Pick-Up Time of Traffic Paint1
60. 15536 ASTM D788-11 Standard Classification System for Poly (Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds1
61. 15537 ASTM D903 – 98 (Reapproved 2010)
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds1
62. 15538 ASTM D968 – 05 (Reapproved 2010)
Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive1
63. 15539 ASTM D1043-10 Standard Test Method for Stiffness Properties of Plastics as a function of temperature by Means of a Torsion Test1
64. 15540 ASTM D1149 – 07 Standard Test Methods for Rubber Deterioration – Cracking in an Ozone Controlled Environment1
65. 15541 ASTM D1214 – 10 Standard Test Method for Sieve Analysis of Glass Spheres1
66. 15542 ASTM D1475 – 98 (Reapproved 2008)
Standard Test Method for Density of Liquid Coatings, Inks, and Related products
67. 15543 ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique1
68. 15544 ASTM D1644-01 (Reapproved 2006)
Standard Test Methods for Nonvolatile Content of Varnishes1
69. 15545 ASTM D1693-08 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics1
9
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
70. 15546 ASTM D2041/D2041M-11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures1
71. 15547 ASTM D2172/D 2172M-11
Standard Test Methods for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures1
72. 15548 ASTM D2205-85 (Reapproved 2010)
Standard Guide for Selection of Tests for Traffic Paints1
73. 15549 ASTM D2240 – 05 (Reapproved 2010)
Standard Test Method for Rubber Test Method for Rubber Property – Durometer hardness1
74. 15550 ASTM D2434 – 68 (Reapproved 2006)
Standard Test Method for Permeability of Granular Soils (Constant Head)1
75. 15551 ASTM D2628 – 91 (Reapproved 2011)
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements1
76. 15552 ASTM D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics1
77. 15553 D 3406-95 (Reapproved 2006)
Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements1
78. 15554 ASTM D3575-08 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers1
79. 15555 ASTM D3677-101 Standard Test Methods for Rubber-Identification by Infrared Spectrophotometry1
80. 15556 ASTM D3776/D3776M-09a2
Standard Test Methods for Mass Per Unit Area (Weight) of Fabric1
81. 15557 ASTM 3786/D3786M-09 Standard Test Method for Bursting Strength of Textile Fabrics – Diapharagm Bursting Strength Tester Method1
82. 15552a ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser1
83. 15553a ASTM D4280-08 Standard Specification for Extended Life type, Nonplowable, Raised Retroreflective Pavement Markers1
84. 15554a ASTM D4354-99 (Reapproved 2009)
Standard Practice for Sampling of Geosynthetics for Testing1
85. 15555a ASTM D4355-07 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and heat in a xenon Arc Type Apparatus1
86. 15556a ASTM D4491-99a (Reapproved 2009)
Standard Test Methods for Water Permeability of Geotextiles by Permittivity1
87. 15557a ASTM D4533-11 Standard Test Method for Trapezoid Tearing Strength of Geotextiles1
88. 15558 ASTM D4541-091 Standard Test Method for Pull-Off strength of Coatings Using Portable Adhesion Testers1
89. 15559 ASTM D4579-00 (Reapproved 2006)
Standard Practice for handling an Acid Degreaser or Still1
90. 15560 ASTM D4716-08 Standard Test Method for Determining the (in-plane) floow rate per unit width and dydraulic transmissibity of a geosynthetic using a constant head1
91. 15561 ASTM D4631 – 95 (Reapproved 2008)
Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique1
92. 15562 ASTM D4632 – 08 Standard Test Method for Grab Breaking Load and Elongation of
10
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
Geotextiles1
93. 15563 ASTM D 4751-04 Standard Test Method for Determining Apparent Opening Size of a Geotextile1
94. 15564 ASTM D4759-11 Standard Practice for Determining the Specification Conformance of Geosynthetics1
95. 15565 ASTM D4833-07 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products1
96. 15566 ASTM D4873-02 (Reapproved 2009)
Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples1
97. 15567 ASTM D4956-11a Standard Specification for Retroreflective Sheeting for Traffic Control1
98. 15568 ASTM D5581-071 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Spec imen)1
99. 15569 ASTM D5199-12 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics1
100. 15570 ASTM D6706-01 (Reapproved 2007)
Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil1
101. 15571 ASTM 6690-07 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements1
102. 15572 ASTM D6637-11 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method1
103. 15573 ASTM D6390-11 Standard Test Method for Determination of Draindown Characteristics in uncompacted Asphalt Mixtures1
104. 15574 ASTM D6241-04 (Reapproved 2009)
Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-related Products Using a 50-mm probe1
105. 15575 ASTM E8/E8M-11 Standard Test Methods for Tension Testing of Metallic Materials1
106. 15576 ASTM E11-091 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves1
107. 15577 ASTM E41-92 (Reapproved 2010)
Standard Terminology Relating to Conditioning1
108. 15578 ASTM E809-08 Standard Practice for Measuring Photometric Characteristics of Retroreflectors1
109. 15579 ASTM E810 – 03 (Reapproved 2008)
Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry1
110. 15580 ASTM F 1553-11 Standard Guide for Specifying Chain Link Fence1
111. 15581 ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials1
112. 15582 BS 410-1:2000 ISO 3310-1:2000
Test Sieves – Technical requirements and testing – Part 1 : Test sieves of metal wire cloth
113. 15583 BS 410-2:2000 ISO 3310-2:1999
Test Sieves – Technical Requirements and Testing – Part 2 : Test Sieves of Perforated metal Plate
114. 15584 BS 812-114: 1989 Testing aggregates Part 114: Method for determination of the polished-store value
Methods of Test for Soils for Civil Engineering Purposes – Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
Methods of Testing Concrete – Part 5 : Methods of testing hardened concrete for other than strength
125. 15595 BS 5212-1 : 1990 Cold applied joint sealant systems for concrete pavements – Part I: Specification for Joint Sealants
126. 15596 BS 5212-2 : 1990 Cold Applied Joint Sealant Systems for Concrete Pavements – Part 2 : Code of Practice for the Application and Use of Joint Sealants
127. 15597 BS 5212-3 : 1990 Cold Applied Joint Sealant Systems for Concrete Pavements – Part 3 : Methods of Test
Specification for Solid glass beads for use with road marking compounds and for other industrial uses
129. 15599 BS 5400 Pt.10C Charts (A) (B) (C)
Charts for Classification of details for fatigue
130. 15600 BS 7542:1992 Method of Test for Curing Compounds for Concrete
131. 15601 BS EN 1090-2:2008 +A1:2011
Execution of Steel Structures and Aluminium Structures Part 2: Technical Requirements for Steel Structures
132. 15602 BS EN 1172:2011 Copper and Copper Alloys – Sheet and Strip for Building Purposes
133. 15603 BS EN 1337-2:2004 Structural Bearings – Part 2 : Sliding Elements
134. 15604 BS EN 1337-3:2005 Structural Bearings – Part 3 : Elastomeric Bearings
12
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
135. 15605 BS EN 1337-4:2004 (Incorporating corrigendum No.1)
Structural Bearings – Part 4 : Roller Bearings
136. 15606 BS EN 1337-5:2005 Structural Bearings – Part 5 : Pot Bearings
137. 15607 BS EN 1337-6:2004 Structural Bearings – Part 6 : Rocker Bearings
138. 15608 BS EN 1337-7:2004 Structural Bearings – Part 7 : Spherical and Cylindrical PTFE Bearings
139. 15609 BS EN 1337-8:2007 Structural Bearings – Part 8 : Guide Bearings and Restraint Bearings
140. 15610 BS EN 1464:2010 Adhesives – Determination of Peel Resistance of Adhesive Bonds – Floating Roller Method
141. 15611 BS EN 1652:1998 Incorporating Corrigendum No.1
Copper and Copper Alloys – Plate, Sheet, Strip and Circles for General Purposes
142. 15612 BS EN 1653 : 1998 Incorporating Corrigendum No.1 and Amendment No.1
Copper and Copper Alloys – Plate, Sheet and Circles for Boilers, Pressure Vessels and Hot Water Storage Units
143. 15613 BS EN 1654 : 1998 Incorporating Corrigenda Nos.1, 2 and 3
Copper and Copper Alloys – Strip for Springs and Connectors
144. 15614 BS EN 1990:2002 + A1:2005 Incorporating corrigenda December 2008 and April 2010
Eurocode – Basis of Structural Design
145. 15615 BS EN 1991-1-7:2006 Incorporating corrigendum February 2010
Eurocode 1 – Actions on Structures – Part 1-7: General Actions – Accidental Actions
146. 15616 BS EN 1993-1-5:2006 Incorporating Corrigendum April 2009
Eurodode 3 – Design of Steel Structures – Part 1-5 : Plated Structural Elements
147. 15617 BS EN 1994-2:2005 Incorporating Corrigendum July 2008
Eurocode 4 – Design of Composite Steel and Concrete Structures – Part 2: General Rules and Rules for Bridges
148. 15618 BS EN 1993-2:2006 Incorporating Corrigendum July 2009
Eurocode 3 – Design of Steel Structures – Part 2 : Steel Bridges
149. 15619 BS EN ISO 9445-1:2010 Continuously Cold – Rolled Stainless Steel – Tolerances on Dimensions and form Part 1: Narrow Strip and cut lengths (ISO 9445-1:2009)
150. 15620 BS EN ISO 9445-2:2010 Continuously Cold – Rolled Stainless Steel – Tolerances on Dimensions and Form Part 2 : Wide Strip and Plate/Sheet (ISO 9445-2:2009)
151. 15621 BS EN 10025-1:2004 Hot Rolled Products of Structural Steels – Part 1 : General Technical Delivery Conditions
152. 15622 BS EN 10025-2:2004 Hot Rolled Products of Structural Steels – Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels
153. 15623 BS EN 10025-3:2004 Hot Rolled Products of Structural Steels – Part 3: Technical Delivery
13
S.NO. ACCESSION NUMBER
DESIGNATION NAME OF THE TITLE
Conditions for Normalized/normalized rolled Weldable Fine Grain Structural Steels
154. 15624 BS EN 10025-4:2004 Hot Rolled Products of Structural Steels – Part 4 : Technical Delivery Conditions for Thermomechanical Rolled Weldable Fine Grain Structural Steels
155. 15625 BS EN 10025-5:2004 Hot Rolled Products of Structural Steels – Part 5 : Technical Delivery conditions for structural steels with improved atmospheric corrosion resistance
156. 15626 BS EN 10025-6:2004 + A1:2009
Hot Rolled Products of Structural Steels – Part 6: Technical Delivery Conditions for Flat Products of high yield strength structural steels in the quenched and tempered condition
157. 15627 BS EN 10029:2010 Hot-Rolled Steel Plates 3 mm thick or above – Tolerances on Dimensions and Shape
158. 15628 BS EN 10048:1997 Incorporating Amendment No.1
Hot Rolled Narrow Steel Strip – Tolerances on Dimensions and Shape
159. 15629 BS EN 10051:2010 Continuously Hot Rolled Strip and Plate/Sheet Cut from Wide Strip of Non-Alloy and Alloy Steels – Tolerances on Dimensions and Shape
160. 15630 BS EN 10095:1999 Heat Resisting Steels and Nickel Alloys
161. 15631 BS EN ISO 10319:2008 Geosynthetics – Wide-width Tensile Test (ISO 10319:2008)
162. 15632 BS EN ISO 12236:2006 Geosynthetics Static Puncture Test (CBR Test)
163. 15633 BS EN 13422:2004+A1:2009
Vertical road signs – Portable deformable warning devices and delineators – Portable road traffic signs – cones and cylinders
164. 15634 BS EN 12620:2002 + A1:2008 Incorporating Corrigendum May 2004
Aggregates for Concrete
165. 15635 BS EN ISO 12958:2010 Geotextiles and Geotextiles related Products – Determination of Water Flow Capacity in Their Plane (ISO 12958:2010)
166. 15636 BS EN ISO 13000-1:2005 Plastics – Polytetra – Fluoroethylene (PTFE) Semi-finished Products – Part 1 : Requirements and Designation
167. 15637 BS EN ISO 13000-2:2005 Plastics – Polytetra – Fluoroethylene (PTFE) Semi-Finished Products – Part 2 : Preparation of Test Specimens and Determination of Properties
168. 15638 BS EN 13391:2004 Mechanical Tests for Post-Tensioning Systems