LATE MODEL WELL MAINTAINED OKUMA CNC MACHINING, TURNING & ACME GRIDLEY FACILITY Okuma Model Captain L-370M Three-Axis Big Bore CNC Turning / Milling Center Okuma Model MB-56VA CNC Vertical Machining Center Cincinnati Industrial Auctioneers Inc. 2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760 INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding Cincinnati Industrial Auctioneers Inc. SALE UNDER THE MANAGEMENT OF Featuring: Okuma MB-56VA CNC VMC (2007), (2) Okuma Captain L-370 Big Bore CNC Turning Centers w/ LNS Bar Feeds (New As 2007), Okuma Cadet L-1420 Long Bed CNC Turning Center (1998), Okuma LNC-8 CNC Turning Center w/ SMW Bar Feed, Okuma MC-4VA CNC VMC, (2) 2” Acme Gridley RB-8 Auto Bar Machines (Reconditioned 2000), 1-5/8” Acme Gridley RA-6 Bored Out To Be 2” Auto Bar Machine, 2-5/8” & 1” Acme Gridley RA-6 Auto Bar Machines, Large Quantity Acme & CNC Turning Center Tooling, Vertical Mills, Surface Grinder, Lift Trucks, Air Compressors, Band Saws, Toolroom & Misc. Machinery, Large Quantity Tooling & Accessories SALE DATE: Tuesday, November 30th Starting at 10:00 AM INSPECTION: Monday, November 29th 10:00 AM to 4:00 PM NEW 4/2007 G & S MFG., INC. G & S MFG., INC. 259 South Wittenburg Ave. – Springfield, Ohio 45506 20 Miles East of Dayton off I-70 INSTALLED 12/2007 Industrial Real Estate To Be Offered at Public Auction See Inside For Details LATE MODEL WELL MAINTAINED OKUMA CNC MACHINING, TURNING & ACME GRIDLEY FACILITY Okuma Model Cadet L-1420 Two-Axis Big Bore Long Bed CNC Turning Center 2” Acme Gridley Model RB-8 Eight Spindle Automatic Bar Machine NEW 1997 Plant Closed Select Items of Major Machinery to be Offered Via “Live Internet Bidding” at BidSpotter.com See Instructions on Page 2 To Become a Qualified Bidder on the Internet NEW 12/2007 Reconditioned 2000
4
Embed
LATE MODEL WELL MAINTAINED OKUMA CNC MACHINING…s3.serverdata.com/ · LATE MODEL WELL MAINTAINED OKUMA CNC MACHINING, TURNING & ACME GRIDLEY FACILITY ... Okuma Cadet L-1420 Long
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
LATE MODEL WELL MAINTAINEDOKUMA CNC MACHINING,
TURNING & ACME GRIDLEY FACILITY
Okuma Model Captain L-370M Three-Axis Big Bore CNCTurning / Milling Center
Okuma Model MC-4VA-SP CNC VerticalMachining Center; S/N 0961, Okuma OSP-5000M-G Control, 16” X 40” T-Slotted Table,25.9” X-Axis, 16.14” Y-Axis, 17.72” Z-Axis, No.40 Taper, 20-Position ATC, Spindle Speeds: 50 –6,000 RPM, Chip Conveyor, Coolant, FullEnclosure Splash Guard, I-Map Function, HighSpeed NC Option, Auto Tool Length Offset w/Auto Tool Break Detection & Touch Sensor,Helical Cutting Control Option, Oil Mist SpraySystem, Auto Work Gauging & Auto Zero Offset,Overload Monitoring by MOP Tool SEE PHOTO
➢ SMW Model MPC-A Pallet Changer;S/N N/A, 18” X 30” T-Slotted Table
CNC TURNING CENTERSOkuma Model Captain L-370M Three-Axis Big Bore CNC Turning / MillingCenter; S/N 518914, 519 Spindle HoursShowing, Okuma OSP-P200L Control, 10”Chuck, 3.15” Spindle Bore, 20.86” Swing OverBed, 16.53” Swing Over Carriage, 13.38” MaxTurn Diameter, 19.68” Max Turning Length, 26.5”Between Centers, 10.23” X-Axis, 20.47” Z-Axis,12-Position Live Tool Turret, Spindle Speeds: 39 -3,800 RPM, A2-8 Big Bore Spindle, 30 HP DriveMotor, Tool Holder Kit, Manual Tool TouchSetter, Parts Catcher, Tailstock, Coolant, ChipConveyor, Admac w/ IGF (New 12/2007)
SEE PHOTO➢ LNS Model Move Quick Six Magazine
Bar Feed; S/N 210316, 75” Max Length,Very Low Hours (New 12/2007)
SEE PHOTO➢ (6) Lyndex Live Tool Holders
Including; (3) X-Axis & (3) Z-Axis
Okuma Model Captain L-370 Two-AxisBig Bore CNC Turning Center; S/N 10-2005-118590, 2,224 Spindle Hours Showing,Okuma OSP-P100 Control, Collet Chuck, 10”Chuck, 3.15” Spindle Bore, 20.86” Swing OverBed, 16.53” Swing Over Carriage, 14.56” MaxTurn Diameter, 26.5” Max Between Centers,10.23” X-Axis, 20.47” Z-Axis, 12-Position Turret,Spindle Speed: 39 - 3,800 RPM, Tailstock, PartsCatcher, Coolant, Chip Conveyor (New 2005)
SEE PHOTO➢ LNS Model 6.68 HS-5.7 Super
Hydrobar Hydraulic Bar Feed; S/N43108, 12’ Max Length, Liners
Okuma Model Cadet L-1420 Two-Axis BigBore Long Bed CNC Turning Center; S/N09-10-0578, Okuma OSP-700L Control, 15”Chuck, 3.5” Spindle Bore, 24.4” Swing Over Bed,18.90” Swing Over Carriage, 14.17” Max TurningDiameter, 9.05” X-Axis, 50” Z-Axis, 12-PositionTurret, Spindle Speeds: 40 - 2,800 RPM,Tailstock, Coolant, Chip Conveyor, Long Bed,Appears to be Very Well Maintained Low HourMachine (New 1997) SEE PHOTO
➢ (2) Okuma Steady Rests w/ .788” -7.874” Dia. Capacity
Okuma Model LNC-8C Two-Axis CNCTurning Center; S/N 0401B1090, Okuma CNCControl, 8” Chuck, 15.75” Swing Over Bed, 9”Max Turning Diameter, 15” Max Work Length,6.75” X-Axis, 15.75” Z-Axis, 12-Position Turret,Spindle Speeds: 75 - 4,200 RPM, Parts Catcher,Tailstock, Coolant, Chip Conveyor SEE PHOTO
➢ SMW Space Saver 12.5 Auto LoadMagazine Bar Feed; S/N N/A
Large Quantity CNC Lathe ToolingIncluding Indexable Tools, Chuck Jaws &Related
AUTOMATIC BAR MACHINES2” Acme Gridley Model RB-8 Eight SpindleAutomatic Bar Machine; S/N 85465,Threading Clutches, 5th Position Logan Air TripThreading, Six-Cross Slides, 3rd & 6th PositionShelf Slides, 7th Position Accelerated Reaming,Trabon Lubrication System, Universal ChipConveyor (Reconditioned 2000) SEE PHOTO2” Acme Gridley Model RB-8 EightSpindle Automatic Bar Machine; S/N85434,Threading Clutches, 4th & 7th Position LoganAir Trip Threading, Universal Chip Conveyor(Reconditioned 2000) SEE PHOTO2-5/8” Acme Gridley Model RA-6 SixSpindle Automatic Bar Machine; S/N84559-X, Threading Clutches, 4th Position AirTrip Threading, 5th Position AcceleratedReaming, Chip Conveyor 2” Acme Gridley Model RA-6 Six SpindleAutomatic Bar Machine; S/N 40221,Originally 1-5/8” Machine Bored Out to 2”,Threading Clutches, 4th Position Air TripThreading, 5th Position Accelerated Reaming,Auger Type Chip Conveyor SEE PHOTO1” Acme Gridley Model RA-6 Six SpindleAutomatic Bar Machine; S/N 23863, 4thPosition Threading, 5th Position AcceleratedReaming, Auger Type Chip Conveyor
SEE PHOTO(2) Winter Thread Rolling Heads; (1) Model160-SA S/N 999 Used on 2-5/8” & 2” Machines,(1) Model 141-SA S/N 936 Used on 1” AcmeLarge Quantity Acme Tooling Consistingof; Numerous H&G Die Heads from 0MM - 1/2”Cap., Part Number Roll Marking Attachment,Collets, Gears, Cams, Shave Tools, End SlideHolders, Tool Blocks & Related
PARTS & CHIP CLEANING Fourway Model B-50 Rotary DrumTumbling Parts Washer; S/N 547, 16”Diameter Washing Tank, 6” Variable Speed PartsConveyor (New 2004) SEE PHOTO36” Barrett Centrifugal Chip Spinner; S/N100193-E, 900 RPM Max, 425 LB Max Load,Baldor Dynamic Brake SEE PHOTOBarrett Centrifugals Clarifuge OilCentrifuge Reclaim System; S/N 1251816F, 2HP Motor
Okuma Model Cadet L-1420 Two-Axis Big BoreLong Bed CNC Turning Center
LNS Model Move Quick Six Magazine Bar Feed
Okuma Model MC-4VA-SP CNC VerticalMachining Center
15 HP Mattei Model EMS150Cabinet Type Rotary Screw AirCompressor
Okuma Model LNC-8C Two-Axis CNC TurningCenter
Okuma Model Captain L-370 Two-Axis Big Bore CNCTurning Center
Okuma Model Captain L-370M Three-Axis BigBore CNC Turning / Milling Center
Okuma Model MB-56VA CNC VerticalMachining Center
WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com
at least 48-Hours Prior to the Sale Date, if you do not you will not beapproved.
➢ All Internet bidders must Post a Deposit of Approx. 25% of Your PlannedSpending Budget with Cincinnati Industrial Auctioneers in Order to beapproved to Bid. Those who do Not Post the Deposit Will Not be Approved.Period.
➢ Only Major Items Will be Availablefor Online Bidding. Please refer tothe Listing on www.bidspotter.comfor Available Online Items.
➢ There is a 15% Buyer’s Premium in Effect for All Online Purchases.
➢ We Highly Recommend that Potential Buyers Attend this Auction & Bid LiveOnsite. This will give you the Ability to Inspect the Items & Fully AppreciateTheir Condition, Along with Saving You 3% of the Buyer’s Premium.
No Last Minute Registrations will be accepted. Make Sure to Register & PostYour Deposit No Later than 48-Hours Prior to the Start of the Auction.
NEW4/2007
NEW12/2007
NEW12/2007
NEW2005
NEW1997
MORE PHOTOS AVAILABLE AT www.cia-auction.com
INSTALLED12/2007
G & S MFG., INC. – SPRINGFIELD, OHIOG & S MFG., INC. – SPRINGFIELD, OHIO
INDUSTRIAL REAL ESTATETO BE OFFERED AT PUBLIC AUCTION AT11:00 AM TUESDAY, NOVEMBER 30TH
6,780 Sq. Ft. Industrial Building on 68.25’ X 116’ Lot;Upgraded 10,000 Amp 3-Phase Electric Service, NewOval Roof 2006 @ Approx. Cost of $10,000, New FrontParking Lot Black Top And Side Walks 2009 @ Approx.Cost of $10,000, Ground Level Doors, 12’ Ceiling Height, Zoned Industrial M-1.
(5) Additional Surrounding Vacant Lots on Wittenberg & Jefferson; Including 77’ X 298’,66’ X 105’, 32’ X 98’, 31’ X 98’, & 36’ X 85’, Lot Sizes Approx., Could be Offered Individually andas Combination.Real Estate Terms of Sale: To Be Offered Live Onsite Only, 10% Buyers Premium On the Real Estate, $10,000.00 Downin Cash or Certified Funds sale day. A 10% Buyers Premium On the Real Estate will be added to the high bid to deter-mine contract price. High bidder will be required to sign a “Contract To Purchase” for the amount at the sale’s con-clusion. Owner will have 48 hours to accept, or reject high bid. If accepted the balance will be due at closing with-in 60 days of auction. If the bid is not accepted buyer’s deposit will be refunded promptly. Seller will present buyera General Warranty Deed at closing. Occupancy shall be given upon closing. Taxes will be prorated until closing.Property will sell on an “as is” basis. There shall be no warranty of any kind given with regards to the premises,other than title; all implied warranties shall be disclaimed. Announcements at the time of sale will take precedentover all information provided in advertisements. Call for complete terms and information package.
Subject to High Bid Confirmation by Owner, Subject to Prior Sale, Subject To Withdraw by Owner. 10% BuyersPremium In Effect For Real Estate.
Jeffrey L. Luggen – AuctioneerThe Levine Realty Company – Douglas R. Cox, CIOS, Broker / Associate (937) 323-9765
1” Acme Gridley Model RA-6 Six SpindleAutomatic Bar Machine
TOOLROOM & MISC.MACHINERY6” X 18” Acer Model AGS-618 Hand FeedSurface Grinder; S/N 5422-333, 6” X 18”Suburban Tool Magnetic Chuck SEE PHOTO3 HP Alliant Variable Speed VerticalMill; S/N 01216648, 9” X 42” Power FeedWork Table, 60 - 4,500 RPM, Acurite DRO
SEE PHOTO3 HP Brown & Sharpe Model No. 2Plain Dial Type Horizontal Mill; S/N 502-20-163, 10” X 50” Work Table12” X 16” Wells Model 1216A AutomaticHorizontal Band Saw; S/N 1011, 1” BladeSize, 24” Automatic Bar Feed, PB Control
SEE PHOTOSouth Bend Model CL8187AB CabinetType Lathe; S/N 10783RKL15, 10” SwingOver Bed, 6” Swing Over Carriage, 6” 3-JawChuck, 22” Between CenterLogan Model 2535-2V4 Screw Cutting &Turret Lathe; S/N N/A, 12” Swing Over Bed,6” Swing Over Carriage, 18” Between Centers10 Ton Sunnen Model BP-10K BenchTop Hydraulic Press; S/N 3RT-9072, 1/2 HP,16” ThroatSunnen Model MBB-1600 PrecisionHoning Machine; S/N 44989Cincinnati No. 1 Tool & Cutter Grinder;S/N 1DZT1F-47Brown & Sharpe No. 2 CylindricalGrinder; S/N N/AOther Misc. Machinery Consisting of; 10Ton Mfg. Unknown H-Frame Hydraulic FloorPress, 6” Belt/12” Disc Mfg. UnknownCombination Sander, 14” Speedy Cut GearTapper, 2” Burr King Model 760 Belt Sander,Bur-Beaver Deburring & Beveling Machine, 8”Craftsman DE Grinder
AIR COMPRESSORS &RELATED15 HP Mattei Model EMS150 CabinetType Rotary Screw Air Compressor; S/NN/A, Hours: 44,118 SEE PHOTO
15 HP Mattei Model EM155 Rotary VaneAir Compressor; S/N 49988, Hours: 13,254
Air Tak Model D-65-A Compressed AirDryer; S/N 92-01-022
RAW MATERIALNumerous Pcs. Aluminum Round StockApprox. 1-1/2” Diameter X 12’Large Quantity of Other Aluminum &Steel Stock of Various Lengths
JIB CRANE1 Ton X 10’ Arm Abel-Howe FreeStanding Rotating Jib Crane; 1 Ton LittleMule Electric Chain Hoist w/ Pendant, 10’Under Arm
LIFT TRUCK5,000 LB Datsun Model RF02 Type 6Pneumatic Tire Gasoline Lift Truck; S/NPF02-005429, Two-Stage Mast, 130” Lift Height
SEE PHOTO
INSPECTION EQUIPMENTMitutoyo Model B706 Three-Axis CNCCoordinate Measuring Machine; S/N8807125, 42” X 50” Granite Drilled & TappedTable, Renishaw TP1S Probe, Metronics QuadraCheck 3000 Control, Replaced Air Line AndCalibrated Machine in October 2010
SEE PHOTO
15” Deltronic Model DH214 OpticalComparator; S/N 229052817, DeltronicMPC-4 DRO SEE PHOTO
Late Model Inspection Tools Consistingof; Wilson Hardness Tester, 60” MitutoyoDigital Caliper, 40” Sony Model H-2100 DigitalHeight Gauge, 24” Sony Model H-2060 DigitalHeight Gauge, 36” X 48” Granite InspectionTable, Pin Gauges, Block Gauges, Bore Gauges,(2) Gauge Setting Fixtures, Plug Gauges, O.D.Micrometers, Radius Gauges, I.D. Grove Gauges& Other Related Items
Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞
All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.
From I-70 West of I-75, Exit I-70 at No. 54, North OH 72 / S.Limestone Street, Turn North & Proceed Approx. 1-1/2 Milesto Grand Ave. Turn Left & Proceed 3 Blocks to WittenbergAvenue. Turn Right & Proceed 1/2 Mile to Auction Site onLeft. Watch for Auction Parking Signs & Arrows.
DIRECTIONS
Cincinnati Industrial Auctioneers – License No. 63-1983-10439Jeffrey L. Luggen – License No. 57-1983-33789Jerome A. Luggen – License No. 62-1983-33799
Jeffrey M. Luggen – License No. 2010-0000-26Joseph M. Luggen – License No. 2010-0000-19
AUCTIONEERS
TUESDAY, NOVEMBER 30THTUESDAY, NOVEMBER 30TH
LATE MODEL WELL MAINTAINED OKUMA CNC MACHINING, TURNING & ACME GRIDLEY FACILITY
G &S MFG., INC.
Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection priorto the sale. This brochure is intended to provide gen-eral information of the equipment being offered and issubject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a finallisting. Items offered may or may not necessarily besold as described and/or photographed in thisbrochure.