EV25DS 1064nm wavelength, air-cooled, single phase, diode end-pumped, Q-switched, 25 Watt Nd:YVO 4 laser marker Excellent choice for high speed surface and deep marking of almost every type of metal. Excellent choice for high speed marking of plastics and label materials. Excellent choice for deep marking of silicon. Cannot mark wood. Can mark some other organic materials. Excellent choice for marking high resolution graphics due to small spot size. ProStation Available EV40 1064nm wavelength, air-cooled, single phase, diode end-pumped, Q-switched, High pulse energy Nd:YVO 4 laser marker Best choice for high speed surface and deep marking of almost every type of metal. Best choice for high speed marking of plastics and label materials. Best choice for deep marking of silicon. Cannot mark wood. Can mark some other organic materials . Best choice for high speed marking high resolution graphics due to small spot size. ProStation Available EV15DS EV10SDS 1064nm wavelength, air-cooled, single phase, diode end-pumped, Q-switched, 10 and 15 Watt Nd:YVO 4 laser marker Good choice for high speed surface and deep marking of almost every type of metal. Excellent choice for high speed marking of plastics and label materials. Excellent choice for surface marking of silicon. Cannot mark wood. Can mark some other organic materials. Excellent choice for marking high resolution graphics due to small spot size. ProStation Available on EV15DS LASER SYSTEMS/ APPLICATIONS Marking metals Marking plastics and label materials (3M, Tesa, etc.) Marking silicon Marking organic materials Marking high quality graphics Workstations Vari-Z 3-Axis Marking Laser Marking System Selection Guide EVCDS/EVC 1064nm wavelength, air-cooled, single phase, diode end-pumped, Q-switched, 8 and 9 Watt compact high reliability Nd:YVO 4 laser marker Good choice for surface marking of almost every type of metal with very small heat effected zone. Good choice for marking plastics and label materials. Can do surface marking of silicon. Cannot mark wood. Can mark some other organic materials. Excellent choice for marking high resolution graphics due to small spot size. MiniPro TablePro DrawerPro Available on EVCDS
3
Embed
Laser Marking System Selection Guide - EngNet...FQ30, FQ20 1060nm wavelength, air-cooled, single phase, Q-switched, 30 and 20 Watt Yb fiber laser marker (Will provide faster cycle
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EV25DS
1064nm wavelength, air-cooled, single phase,
diode end-pumped, Q-switched, 25 Watt
Nd:YVO4 laser marker
Excellent choice for high speed surface and deep marking of almost every
type of metal.
Excellent choice for high speed marking of plastics
and label materials.
Excellent choice for deep marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Excellent choice for marking high resolution
graphics due to small spot size.
ProStation
Available
EV40
1064nm wavelength, air-cooled, single phase,
diode end-pumped, Q-switched, High pulse energy Nd:YVO4 laser
marker
Best choice for high speed surface and deep
marking of almost every type of metal.
Best choice for high speed marking of plastics
and label materials.
Best choice for deep marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Best choice for high speed marking high
resolution graphics due to small spot size.
ProStation
Available
EV15DSEV10SDS
1064nm wavelength, air-cooled, single phase,
diode end-pumped, Q-switched, 10 and 15 Watt
Nd:YVO4 laser marker
Good choice for high speed surface and deep marking of almost every
type of metal.
Excellent choice for high speed marking of plastics
and label materials.
Excellent choice for surface marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Excellent choice for marking high resolution
graphics due to small spot size.
ProStation
Available on EV15DS
LASER SYSTEMS/APPLICATIONS
Marking metals
Marking plastics and label materials
(3M, Tesa, etc.)
Marking silicon
Marking organic materials
Marking high quality graphics
Workstations
Vari-Z 3-Axis Marking
Laser Marking System Selection Guide
EVCDS/EVC
1064nm wavelength, air-cooled, single phase,
diode end-pumped, Q-switched, 8 and 9 Watt
compact high reliability Nd:YVO4 laser marker
Good choice for surface marking of almost every type of metal with very
small heat effected zone.
Good choice for marking plastics and
label materials.
Can do surface marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Excellent choice for marking high resolution
graphics due to small spot size.
MiniProTablePro
DrawerPro
Available on EVCDS
FQ30, FQ20
1060nm wavelength, air-cooled, single phase,
Q-switched, 30 and 20 Watt Yb fiber laser marker
(Will provide faster cycle times than FQ10.)
Better choice for surfaceand deep marking of some metals. (Sensitive to back
reflection. Not recom-mended for copper, brass or any other highly reflective or
polished metals.
Better choice for marking many plastics and label
materials. (Some surface melting can occur due to
long pulse width.)
Capable of deep marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Can mark high quality graphics on some metals.
ProStationTablePro
DrawerPro
Available
LASER SYSTEMS/APPLICATIONS
Marking metals
Marking plastics and label materials
(3M, Tesa, etc.)
Marking silicon
Marking organic materials
Marking high quality graphics
Workstations
Vari-Z 3-Axis Marking
FQ50
1060nm wavelength, air-cooled, single phase,
Q-switched, 50 Watt Yb fiber laser marker
Best choice for surfaceand deep marking of some metals. (Sensitive to back
reflection. Not recom-mended for copper, brass or any other highly reflective or
polished metals.
Best choice for marking many plastics and label
materials. (Some surface melting can occur due to
long pulse width.)
Capable of deep marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Can mark high quality graphics on some metals.
ProStationTablePro
DrawerPro
Available
Laser Marking System Selection Guide
EY6DS
1064nm wavelength, air-cooled, single phase,
diode end-pumped, Q-switched, 6 Watt Nd:YAG
laser marker
Good choice for surface and deep marking all
metals.
Good choice for marking plastics and label materials.
Capable of deep marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Excellent choice for marking high resolution graphics due
to small spot size.
ProStationTablePro
DrawerPro
Not Available
FQ10
1060nm wavelength, air-cooled, single phase,
Q-switched, 10 Watt Yb fiber laser marker
Good choice for surfaceand deep marking of some metals. (Sensitive to back
reflection. Not recom-mended for copper, brass or any other highly reflective or
polished metals.
Better choice for marking many plastics and label
materials. (Some surface melting can occur due to
long pulse width.)
Capable of deep marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Can mark high quality graphics on some metals.
ProStationTablePro
DrawerPro
Available
For all applications, it is highly recommendedthat samples be sent to TELESIS for
qualification and testing purposes.
CO10A/CO10AP
10.6um wavelength, air- cooled, single phase,
RF excited, 10W CO2 laser marker
Can mark some anodized metal surfaces.
Excellent choice for high speed marking of plastics and some label materials.
Not recommended
Excellent choice for marking wood and other
organic materials.
Can mark high quality graphics on plastics and
on some anodized metal surfaces.
ProStationTablePro
DrawerProothers consult factory
Not Available
EV4GDS
532nm wavelength; air-cooled; single phase;
diode end-pumped, Q-switched, 4 Watt green
laser marker
Excellent choice for high speed surface marking all
metals with very small heat effected zone produced.
Excellent choice for marking plastics. Marks large variety
of plastics.
Excellent choice for surface marking of silicon.
Cannot mark wood. Can mark some other
organic materials.
Excellent choice for marking high resolution graphics due to small spot size. Highest
resolution capability.
ProStationTablePro
DrawerPro
Available
CO30AP
10.6um wavelength, air-cooled, single phase,
RF excited, 30W CO2 laser marker
(provides faster cycle times than CO10 series)
Can mark anodized metal surfaces. With short focal length lenses, can mark some non-plated metal
surfaces.
Excellent choice for high speed marking of plastics and some label materials.
Not recommended
Excellent choice for marking wood and other
organic materials.
Can mark high quality graphics on plastics and
on some anodized metal surfaces.
TableProDrawerPro
others consult factory
Not Available
CO60
10.6um wavelength, air-cooled, single phase,
RF excited, 60W CO2 laser marker
(provides faster cycle times than CO30 series)
Can mark anodized metal surfaces. With short focal length lenses, can mark some non-plated metal
surfaces.
Excellent choice for high speed marking plastics and